X64 Server and x32 Client on Same Machine

I have a 32-bit application I need to run on 64-bit machine (Windows). The application crashes as it can't load the 64-bit oci.dll.
Would I be able to install the 32-bit Oracle client on this machine to get this application to work?
Note that the client will be on the same machine as the server.

According to certification matrix (metalink) 32bit clients (9.2 and higher) are supported on 64bit servers. Of course in their own ORACLE_HOME.
Werner

Similar Messages

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • Problems w/ VPN Server & Cisco VPN Client on same machine

    I really wish that I read about how the developer of the program iVPN no longer supports his work BEFORE I paid for it. It's a great, simple, GUI frontend to the existing Leopard VPN server built in to regular (non-server) OSX...
    Anyway, on my Mac that stays @ home:
    (1) - I have the iVPN server set up & running to allow me to connect (from my iphone or another computer on the road) to my Mac @ home using L2TP.
    (2) - When I'm @ home and need to connect to my company's network, I need to use the Cisco VPN Client (which uses IPSec etc).
    So, I found out that when I need to use my Mac to connect to work, I first have to open up the iVPN server to click "Stop Server" (which has me enter my password twice sometimes). Now I close iVPN until I'm done, then open up Activity Monitor for the purpose of finding the still-running process "racoon". I realized this not because it's published info, but because if I don't do this, and try to connect to work using the Cisco VPN Client, it simply will not connect. So, I quit the process "racoon" (which also has me enter my password because it's running as root yada yada). NOW, I can load Cisco VPN Client and successfully connect to my company's network. When I'm finished here, I disconnect the C.V.C., then reopen iVPN Server and restart my server (enter password again).
    Is there any way I can make the process "racoon" quit automatically when I turn off the iVPN server? I'd email the developer but I guess that's a lost cause now. It's a shame because he did a fabulous job making iVPN & gave the less computer-networking-literate-user the ability to create their own VPN server without using Terminal.
    I thought about the possibility of using iVPN to create a PPTP connection instead of L2TP - thinking that would allow me to keep my iVPN PPTP server running at all times, even when I wanted to use the CVC to connect OUT to work - but:
    (1) - I would like the increased security of L2TP.
    (2) - When I tried running a PPTP server, and connecting to it from iPhone or other computer, I was NOT able to access the other devices on my network, or the internet. I couldn't even open up a webpage to check whatismyip.com (while sending all traffic over VPN). And yes, the IP Address Range that I have iVPN handing out is within my normal home network's range.
    My end goal for all of this when using my Mac is to be able to leave my iVPN server running at all times, while still being able to run the Cisco VPN CLIENT to connect to my company's network.
    Or, at least not having to open up Activity Monitor to quit the process racoon... let alone having to enter my password 3 times after opening up iVPN, again to stop the server, again to quit the process racoon. Then a forth when I'm all done and need to start the iVPN server again.
    Am I going about this the wrong way? Is there an easier way to accomplish these secure connections? There is a slight possibility of me upgrading and running a dedicated Mac Mini server of some sort perhaps with the real OSX Server. But not right now. I think I'm over complicating this. I mean, my needs are pretty simple:
    (1) - Need to connect TO my Mac from IPhone / someone else's Mac or PC for: VNC over SSH, SSH/SFTP file level access, in the future shared network volumes (time capsule). I'd use Back To My Mac for all of this but I don't always connect FROM a Mac.
    (2) - Need to connect FROM my Mac to work VPN for: VNC to my work PC to access our company's Windows-only program (dual booting into boot camp or using a virtual machine is out of the question), using Mocha for AS400 access, thinking about using file sharing on work PC but not needed so far.
    So it's really just VNC and sometimes SFTP. The "S" being important to me. That's why I don't like the idea of doing away with my iVPN server and just forwarding the outside ports. I use the Vine VNC Server which when checked, only allows access over SSH. The only other remote-logins are used from my iphone using an app called BriefCase (SSH to browse files on remote machine), or using an SFTP client on a computer.
    Thank you for reading all of this, and in advance for any insight you can offer.

    If the two servers need the same ports, then hosting two different VPN packages on the same box usually won't work.
    A firewall-based VPN service can be an option; that external box can deal with NAT and routing and other such and can field incoming or LAN-to-LAN VPNs, and your internal Mac boxes located "behind" that box can be free to initiate outbound VPNs.

  • Web server and apex running on same machine - port 8080 possible conflict

    Hi Guys,
    I have installed Apache Tomcat and currently in the process of installing Oracle 11G in the same machine.
    The tomcat is using port 8080 and I understand from other installs, that APEX uses 8080 as well.
    Is there way after installing Oracle 11G XE database, to shut down APEX so it doesn't conflict with Tomcat's use of 8080? I have no use for APEX at this point want to shut it down if its possible.
    Alternatively, can it be configured to use another port?
    Many thanks.

    You can do either, shut it down or change the port. So sad that you said you "have no use for Apex...". :(
    What gateway are you using for Apex? Is it the EPG, OHS or the Apex Listener? If you're using the EPG then there is a whole command structure/API for that. Here are a couple that you can run from a SQLPlus session:
    SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
    EXEC DBMS_XDB.SETHTTPPORT(port);
    For example:
    EXEC DBMS_XDB.SETHTTPPORT(8080);
    OR
    EXEC DBMS_XDB.SETHTTPPORT(8181);If you're using OHS then you go to your OHS/Apache directory and find the OPM path and issue your shutdown startup commands from there. If it's the Apex Listener with Glassfish then you go to the Glassfish admin console and shutdown your Apex deployment from there. Specifics I'll leave to you.
    Earl

  • Designer 6i and 10g on the same machine?

    I have Designer 6i and corresponding repository on my machine.
    The problem with 6i I can't save diagramm in HTML format
    I believe I can save in HTML format in 10g or other?
    Can I install on the same machine 10g designer?
    should I configure new repository?
    TIA

    See my update on your earlier question.
    As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
    Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

  • Is it possible to run VLM and lmtools on the same machine

    hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
    the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

    Hi SvenNittmann,
    in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
    Volume License Manager on a Virtual Machine - National Instruments
    http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
    I also use VLM in a virtual machine and I could recommend you the same solution.
    Regards, Stephan

  • Strange problem with AIX server and windows clients

    I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
    clients on windows. We have J2SE Swing application as a client.
    If the client is w2k or XP, the first client gets good response. If I start
    another client the second client is horribly slow (2 sec vs 16 sec). Even if
    I kill the first client the second client continues to be slow. If I have 2
    clients open together, the first one continues giving 2 sec response while
    the second one continues with 16 sec. For that matter if I start another
    client after shutting down first one I get slow (16 sec) response.
    If the client is NT client I always get good and consistent response from
    the server. Irrespective of how many client I have on the NT machine, I keep
    getting good response. NT and W2K laptops are seating right next to each
    other on the same n/w and infact the NT is a much slower and lessor memory
    machine than W2K.
    We did similar tests keeping server on Solaris or NT server or W2K server,
    and the clients "behave" normally i.e I get consistent repsponse time (it
    may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
    We even tried putting my laptop on the same network as the AIX server, but
    it did not help. Unfortunately some of our clients will be using AIX and
    W2K.
    HELP!!!!

    "Cameron Purdy" <[email protected]> wrote in message
    news:[email protected]..
    Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
    get a better performance and the subsequent clients get worse performance?
    >
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com/coherence.jsp
    Tangosol Coherence: Clustered Replicated Cache for Weblogic
    "vinay moharil" <[email protected]> wrote in message
    news:[email protected]..
    I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
    clients on windows. We have J2SE Swing application as a client.
    If the client is w2k or XP, the first client gets good response. If Istart
    another client the second client is horribly slow (2 sec vs 16 sec).
    Even
    if
    I kill the first client the second client continues to be slow. If I
    have
    2
    clients open together, the first one continues giving 2 sec response
    while
    the second one continues with 16 sec. For that matter if I start another
    client after shutting down first one I get slow (16 sec) response.
    If the client is NT client I always get good and consistent responsefrom
    the server. Irrespective of how many client I have on the NT machine, Ikeep
    getting good response. NT and W2K laptops are seating right next to each
    other on the same n/w and infact the NT is a much slower and lessor
    memory
    machine than W2K.
    We did similar tests keeping server on Solaris or NT server or W2Kserver,
    and the clients "behave" normally i.e I get consistent repsponse time(it
    may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
    We even tried putting my laptop on the same network as the AIX server,
    but
    it did not help. Unfortunately some of our clients will be using AIX and
    W2K.
    HELP!!!!

  • Installation of different versions of GUI clients on same machine

    Hi All,
    Is there any document about how to install different versions of MDM GUI clients on same Machine.
    we have different version of MDM server in Sandbox and Developement environment. I know we can install different versions of GUI Clients by specifying different locations. But i am looking for some standard document / SAP note. Please if anyone has this information, it will be very helpful.
    Thanks and Regards,
    Shiv

    Hi Shiv,
    You can find this information regarding different Version of GUI Clients on same machine from Standard SAP Installation Guide on Page 51
    5.1 Maintaining Multiple Versions of MDM it tells that you can install multiple versions of MDM 5.5 on one host and switch between the versions.This may be useful, for example, when updating the patch level.
    Please refer to SAP Installtion guide,
    https://websmp201.sap-ag.de/~sapidb/011000358700001119842007E
    Also Check SAP Note: 1283687
    Best Regards,
    Mandeep Saini

  • Unable to start weblogic server using another user of same machine

    Hi,
    I have installed weblogic using my credentials.I am able to start it properly with my credentials.
    I am getting error while starting weblogic server from another user of same machine having same admin rights.
    It shows following details while starting server and process stops:
    <22-Dec-2011 06:15:02 o'clock GMT> <Info> <Security> <BEA-090905> <Disabling C
    ptoJ JCE Provider self-integrity check for better startup performance. To enable
    this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true
    >
    <22-Dec-2011 06:15:02 o'clock GMT> <Info> <Security> <BEA-090906> <Changing th
    default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To
    enable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    Please advice.
    Thanks and Regards:
    Priya

    Can you check the server log file for more details. The server log file is located in the <domain-home>/servers/<server-name>/logs directory.
    There probably something wrong with the log rotation or something similar. Usually when certain files that are created during runtime belong
    to a certain user, other users do not have rights or they must belong to the same group.
    Also note that the messages are only info messages and are not really the cause.

  • Installatioin of BWI and R/3 on same machine.

    Hi,
    I installed BWI on a server. If i like to install R/3 on same machine, then do I need to again install Central instance or Just Database instance? When I install BWI, I installed first the central instance and then database instance and now when I am trying to install R/3 its giving me a menu which has Central instance, Database Instance , Dialog instance. Is Central instance different for BWI and R/3? What do we actually mean Central instance. Even though is not advisable to install BWI and R/3 on same machine, but in my case i am trying to do that, so do I need to also install Central instance even though it was installed during BWI installation?
    Thanks.
    Syed.

    Hello sYed,
    How r u ?
    You can install BW & R/3 on same system, but u cannot do any extractions like Generic, Co-PA, etc. Also, its not advisible to install both BW & R/3 in a single operating system, so you have to install Windows 2000 & Windows 2003 then install R/3 & BW Respectively.
    I think its possible to install in a single operating system, when ever u want to work on R/3 or BW, u have to kill one server and start the other one and so on.
    Hope this helps,
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

    oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
    Reply
    Dear Friends,
    I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
    at this time my database was into another machine.
    then i installed oracle 9i database into the same machine
    (as the oracle 9ias was installed)
    at the instalation of oracle 9i database one error comes
    and shows that Agent configuration Assistant Installation
    fail.
    but After installation of database it work properly.
    there is no problem.
    but when I try to run from through web(by using oracle 9ias)
    it gives Internal error(500).
    i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
    HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
    With regards
    Siddharth Singh
    [email protected]

    Hi James,
    Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
    If yes what is the version of RH Linux you were using ?
    Any docs for that ?
    [email protected]
    Regards
    Amudharasu

  • Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

    Hello,
    I use Entity Framework code first approach.
    My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
    I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
    But, Is this possible to access SQL Server and Oracle in the same project.
    Thanks,
    Murugan

    This should be possible with a Code-First workflow.  In Code-First the database mapping layer is generated at runtime.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • CS3 Bridge and CS4 on the same machine.

    Hello Everyone,
    I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

    Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
    I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
    I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
    CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine?
    Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
    G5   Mac OS X (10.4)  

    And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

  • Bluetooth communication  between J2SE server and J2ME client

    Hi everyone!
    I'm new here in this forum...
    I try to make a small project to my studies,
    My project will include J2SE server and J2ME client.
    I'm stuck in the step of finding the server with the wireless toolkit emulator.
    I found this issue in old subject: here
    I try the solution in reply 6 but I don't understand exactly who to define kvem.home, and I got this error:
    " You must define the system property "kvem.home" "
    maybe someone can help me and explain how to do that?
    thanks!

    Hello,
    I want to find out how this can be done, too. I tried with
    System.setProperty("kvem.home", "C:\\WTK2.5.2");but I get an error:
    java.lang.UnsatisfiedLinkError: com.sun.kvem.jsr082.impl.bluetooth.BluetoothController.setSystemProperty(Ljava/lang/String;Ljava/lang/String;)I included these files in the build path:
    c:\WTK2.5.2\wtklib\gcf-op.jar
    c:\WTK2.5.2\wtklib\kenv.zip
    c:\WTK2.5.2\wtklib\kvem.jar
    and I import com.sun.kvem.bluetooth.*;
    I'd appreciate any help.

Maybe you are looking for