X86_64: Vuze fails to start after a recent update

I recently updated my computer after which vuze doesn't want to start anymore.
Here's the output:
$ vuze
Starting Azureus...
Suitable java version found [java = 1.6.0_12]
Configuring environment...
Java exec found in PATH. Verifying...
find: `/home/stefan/.home/.azureus/plugins': No such file or directory
Browser check failed with: no swt-gtk-3349 or swt-gtk in swt.library.path, java.library.path or the jar file
Auto-scanning for GRE/XULRunner. You can skip this by appending the GRE path to LD_LIBRARY_PATH and setting MOZILLA_FIVE_HOME.
checking /usr/lib/xulrunner-devel-1.9.0.8 for GRE
Can not use GRE from /usr/lib/xulrunner-devel-1.9.0.8 because it's missing components/libwidget_gtk2.so.
checking /usr/lib/firefox-3.0 for GRE
Can not use GRE from /usr/lib/firefox-3.0 because it's missing components/libwidget_gtk2.so.
checking /usr/lib/mozilla for GRE
Can not use GRE from /usr/lib/mozilla because it's missing components/libwidget_gtk2.so.
checking /usr/lib/xulrunner-1.9.0.8 for GRE
Can not use GRE from /usr/lib/xulrunner-1.9.0.8 because it's missing components/libwidget_gtk2.so.
checking /usr/lib/xulrunner-devel-1.9 for GRE
Can not use GRE from /usr/lib/xulrunner-devel-1.9 because it's missing components/libwidget_gtk2.so.
checking /usr/lib/xulrunner-1.9 for GRE
Can not use GRE from /usr/lib/xulrunner-1.9 because it's missing components/libwidget_gtk2.so.
Browser check failed with: Could not initialize class org.eclipse.swt.widgets.Display
Can't create browser. Will try to set LD_LIBRARY_PATH and hope Vuzehas better luck.
GRE/XULRunner automatically found
Loading Azureus:
java -Xmx128m -cp "./Azureus2.jar:./swt.jar" -Djava.library.path="/usr/share/vuze" -Dazureus.install.path="/usr/share/vuze" -Dazureus.script="/usr/bin/vuze" -Dazureus.script.version=2 org.gudy.azureus2.ui.swt.Main
file:/usr/share/vuze/Azureus2.jar ; file:/usr/share/vuze/swt.jar ; file:/usr/share/vuze/
changeLocale: *Default Language* != English (United States). Searching without country..
changeLocale: Searching for language English in *any* country..
changeLocale: no message properties for Locale 'English (United States)' (en_US), using 'English (default)'
DEBUG::Fri Apr 17 13:20:01 CEST 2009::org.gudy.azureus2.ui.swt.mainwindow.SWTThread::createInstance::69:
Loading SWT Libraries failed. Typical causes:
(1) swt.jar is not for your os architecture (amd64). You can get a new swt.jar (Min Version: 3.3) from http://eclipse.org/swt
(2) No write access to '/tmp'. SWT will extract libraries contained in the swt.jar to this dir.
Initializer::<init>::110,Main::<init>::84,Main::main::217,NativeMethodAccessorImpl::invoke0::-2,NativeMethodAccessorImpl::invoke::39,DelegatingMethodAccessorImpl::invoke::25,Method::invoke::597,MainExecutor$1::run::37,Thread::run::619
java.lang.UnsatisfiedLinkError: no swt-gtk-3349 or swt-gtk in swt.library.path, java.library.path or the jar file
at org.eclipse.swt.internal.Library.loadLibrary(Unknown Source)
at org.eclipse.swt.internal.Library.loadLibrary(Unknown Source)
at org.eclipse.swt.internal.C.<clinit>(Unknown Source)
at org.eclipse.swt.internal.Converter.wcsToMbcs(Unknown Source)
at org.eclipse.swt.internal.Converter.wcsToMbcs(Unknown Source)
at org.eclipse.swt.widgets.Display.<clinit>(Unknown Source)
at org.gudy.azureus2.ui.swt.mainwindow.SWTThread.<init>(SWTThread.java:92)
at org.gudy.azureus2.ui.swt.mainwindow.SWTThread.createInstance(SWTThread.java:69)
at org.gudy.azureus2.ui.swt.mainwindow.Initializer.<init>(Initializer.java:110)
at org.gudy.azureus2.ui.swt.Main.<init>(Main.java:84)
at org.gudy.azureus2.ui.swt.Main.main(Main.java:217)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.aelitis.azureus.launcher.MainExecutor$1.run(MainExecutor.java:37)
at java.lang.Thread.run(Thread.java:619)
Exit from Azureus complete
No shutdown tasks to do
Azureus TERMINATED.
It looks like it's a problem with the swt libraries?
Steps I've tried to solve this problem include:
* Reinstalled vuze, built vuze from AUR
* Reinstalled JRE. Uninstalled JRE and tried openjdk6
* Installed SWT from extra and copied new swt.jar to /usr/share/vuze
* Downloaded new SWT (64 bit) from eclipse homepage and tried that instead
* Tried starting as root
* Removed ~/.azureus
No luck.
I'm really at a loss here. I hope someone can give me some insight into this mystery.
Last edited by zoledian (2009-04-17 11:29:16)

Sounds to me like "AVG Safe Search" if you have "AVG Free" installed then you get the extension. Follow the directions on the page below and also check your other extensions for potential problems.
* http://kb.mozillazine.org/Problematic_extensions

Similar Messages

  • Master Collection fails to start after Windows Vista update

    Last night, Automatic Update patched my machine and restarted. This morning, I find that all my CS3 apps (from Master Collection) will not start. Every app presents me with the "Adobe ________ .exe has stopped working." Has anyone else experienced this? Thanks!
    Vista Ultimate x64
    Intel Core2 Duo 2.66GHz
    8GB RAM
    Angry
    -Andrew

    Hi all, just ran into the same issue after Service Pack 1 for Vista. Here's the solution:
    If you are getting a message about the BRS pencil tool when launching Illustrator and you are using Windows Vista or XP, you may be missing an important font.
    For Vista users you are missing the Segoe-UI font. For XP users
    you are missing the Tahoma font. These fonts need to be installed on
    your system in order for Illustrator, Flash, Photoshop and InDesign to
    launch. Most of the other applications will give you a generic
    "application has stopped working" error when trying to launch.
    Also,another clue is located inside the Event Viewer. For vista users, click on your start button and in the search area type "event", the event viewer will show in the results area, click on it and then click on "windows logs", then click on "application". For XP users, click Start, then Run and type "eventvwr" and hit enter, then click on
    "Application". By double-clicking on an error you will see the
    description for the problem. If the faulting module shows AdobeOwl.dll, you are most likely missing the font. You can do a google search for the font and they are available for download.
    So far I have not found a solution for a mac. The documents referencing these errors are kb402311 and 331889

  • Error: Windows Vista failed to start. A recent hardware or software change might be the cause

    PLEASE HELP!
    My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
    I tried the following on my Lenovo:
    Windows repair menu = "windows cannot be repaired"
    Lenovo Rescue and Repair 
    Rescued my files from Hard-drive (copied to external hdd)
    Restore System = Failed
    Diagnose hardware = HDD passes all tests
    Don't know what else to do with = Boot from another device ? Access BIOS?
    Because I do not have the windows vista install disks
    I purchased and downloaded the recovery disks from neosmart.net
    The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
    The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
    I don't know what to do next? 
    Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
    Will I still have windows? 
    PLEASE HELP!

    Hi, Josemne
    Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • HT1688 I have a PC computer and an I-phone 4s.  I set up an i-tunes acct online w/ icloud.  after a recent update my computer started receiving an error message on start up.  it says "AppleSyncNotifier.exe - Entry Point Not Found".  I click OK and it move

    I have a PC computer and an i-phone 4S.  I set up an i-tunes acct online w/ icloud.  After a recent update my PC started receiving an error message on start up.  It says "AppleSyncNotifier.exe - Entry Point Not Found".  It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll".  I click on OK and it moves on.  It doesn't seem to affect my computer, but it's annoying.  Any ideas on correcting this?

    UPDATE - (Made a second post so it'd be clearer)
    I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
    Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
    In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
    I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
    On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

  • ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4

    I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
    There is a crash report but I don't know how to read it. See attached.
    Please help, I need this working for my job.
    Thanks...Colin

    Dear Craig,
    Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
    I'm sure that this is 64-bit
    CF 8.0.1 Enterprise Build 3080
    I had moved the Java SE 6 to the top in both Plugin and Applications. The
    correct version is showing in the terminal window. See below.
    Last login: Thu Jun 18 11:27:09 on ttys001
    Beta-4:~ Colin$ java -version
    java version "1.6.0_13"
    Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
    Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
    Beta-4:~ Colin$
    CF will not start. I have the activity monitor open, and when I start CF you
    see it in the activity monitor for a few seconds as it starts up. When the
    message process is completed in the terminal window CF disappears in the
    activity monitor.
    Any suggestions?
    C
    Hi, Colin,
    My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
    (Intel or PowerPC)? (2) What version of CF are you running and what installer
    did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
    To start, try the following:
    1. Normally you'd shut CF down first ... but that's not necessary for you
    2. Open Java Preferences again
    3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
    Plugin and Applications)
    4. Open Terminal
    5. Type java -version (you should see 1.6.0_13 as the new version)
    6. Try to start CF again
    This may not work (I've had issues with it) but it's technically how it's
    supposed to work. With the Java Preferences utility, you're visually setting a
    default JVM (you can do it with commands in Terminal but this is much faster
    and easier).
    If CF still won't start, look for the jvm.config file in your CF application
    folder (try /Applications/ColdFusion8/bin or
    /Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
    is on my machine for a particular version of CF that's installed similar to
    yours). You can override the JVM in this file but, hopefully, that won't be
    necessary!
    Best,
    Craig

  • Lenovo T410s recovery windows 7 failed to start after the system instalatio​n.

    I've got a problem with the laptop Lenovo T410s. I've put the new HDD on it (tried even the same with a different HDD too), and started to instal WIN 7 64-bit from the recovery disks. I used to do it many times so far with different Lenovo laptops without any problems. But this time, a while before the end of the instalation (when processing the sdrivebackup.wim) it stops and comes with a statement: " the recovery process has been finished, please ...." (but I see that the progres bar is far awayfrom 100%) , and finishes the instalation, reboot the computer and it comes the screen with the statement from the Windows Boot Manager:
    "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem (...)
    File: \Windows\system32\winload.exe
    Status: 0xc000000f
    Info: The selected entrycould not be loaded because the application is missing or corrupt"
    I read a lot about the ways to solve similar problems, but they don't work on my case. The strange thing is, that I can instal WIN 8 or WIN7 from regular Windows instalation disks  (not from Lenovo recovery, but from normal universal Windows instalation disks).
    As I told before, I tried it in 2 different HDD disks with the same effect. It looks that the recovery instalation stops before the end without instaling some files which are missing later during starting the system.
    Anybody can help me with that problem?
    Solved!
    Go to Solution.

    It doesn't quite sound like it based on your reported error messages, but are you trying to do recovery to an advanced format HDD?  (one with 4k-byte sectors)
    I ran into that issue on a T400.  The recovery media would run to completion then error out - with a somewhat different message IIRC.
    There weren't appropriate drivers for an AF drive, and I couldn't find a solution.  There's no way (that I know of) to inject drivers into recovery media the way one can with install media.
    If this is an AF drive issue the only way to get around it may be to install to a non-AF drive (usually a small-ish one) and then clone to your new drive.
    I may be totally off in left field here - just tossing it out as a possibility.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Windows failed to start. A recent hardware of software change might be the cause.

    Hello,
    Last night when I was finished using it for the day I went ahead and shut it down. Prior to shutting it down it was working perfectly fine. When I went to boot it up this morning, I kept getting the error that windows was  unable to start normally and it took me to startup repair multiple times. I don't have the operating system disk (Windows 7) anymore I'm not sure if my computer just didn't come with a windows 7 disk. All I know is that I don't have it anymore.  I tried basically everything I could find on the internet that was supposed to help with it and nothing works. I tried going into safe mode and using the command prompt, still nothing. It's now just showing up with a screen saying "Windows failed to start. A recent hardware of software change might be the cause. But like I said, this comes as a problem seeing as though I don't have my windows disc. I would really like to now if there is a way to fix this problem. I am requesting your help to fix this issue. 

    try to download and burn a copy of win7 from forums.MyDigitalLife.info
    match your version and bits of windows
    then run   repair / Startup Repair 3x off the win7 dvd without letting it try to start into windows.  rebuilds your partition tables and fixes a lot of things.
    if that doesnt get you into windows... read up and run   SFC   /offwindir /offbootdir  from the win7 dvd
    you dont say much what you've tried  .. i assume you tried from the F8 menu / startup repair / an older system restore date ?
    You need the windows7 dvd !!!

  • Windows failed to start. A recent hardware or software change might be the cause.

    I'm using HP dv6 7043 cl. My system was really slow. It was taking almost 7 mins in startup. I tried to reboot but I think I chose the wrong option while doing it. I pressed F9 button. It asked me to choose DVD-R or usb. I chose dvd option as my recovery was made on discs. Later it gave me the hp recovery menu options. There, I chose system recovery. It did it successfully but now the windows is not starting. It says Windows failed to start. A recent hardware or software change might be the cause. Can someone please help and tell me how can I solve this issue and again get back my original windows?

    Hi,
    Assuming this may just a problem with the recovery media/process, here's an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source - Digital River.
    Windows 7 Images.
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1349 ITunes failed to start after an upgrade, won't allow me to re-install saying "Apple Mobile Device failed to start, check for sufficient priveleges"

    My ITunes library failed to start after an upgrade, now I'm unable to open or re-install.  Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system".  Any help with this?  I've tried un-installing and downloading only to get the same message again.

    Thank you to "turingtest2", solution for someone else worked for me as well!

  • Multiple Oracle Homes - Oracle Listener failes to start after installation

    Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
    ...\oracle\<SID>\<Ver>\NETWORK\ADMIN
    All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
    If they do not, manually change the ports and start the listeners.
    Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
    Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

    hi
    thanks for the help ,
    I have been using the SQL Server , i am totally blank about Oracle
    i am totally confused with this user, and hoststring
    i logged in to the enterprise manager using System and manager password
    But i cannot connect to any database using SQL Server
    i am not remembering any user name or password i have given during installation.
    the only thing i remember is
    Global databasename = (globedb) i have given
    For SID = globedb the same name i have given
    for sys ,i have given sysdb as password
    and for system i have given systemdb as password
    with this can i do anything
    when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
    if i want to login to the scott
    what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
    if any one can help me please help me
    thanks regards

  • Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

    Hi,
    My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
    Same issue for iphoto .
    Help
    Benoit

    help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

  • TS3367 when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. sugges

    when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
    i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
    http://www.apple.com/support/systemstatus/

  • Cluster group on node B (app1) failed to start after applied win2003 SP2

    Hi,
    i followed microsoft kb174799 to apply SP2 on both ms-cluster nodes namely DB/APP1. SAP-R/3 cluster group on node B (APP1) failed to start after i did step 13
    Thanks & Regards,
    Kelvin

    Hello,
    Did you follow the procedures from note 985137 to apply the SP2
    Please check procedure in this note.
    985137    Service Pack Installation for SQL Server 2005
    regards,
    John Feely

  • Oracle AS - DB Console fails to start after AS install

    Hi,
    I got an error message at the time of Oracle AS Infra install that setup failed to start the DB Console during DB Configuration assistant run. Also, Oracle AS - DB Console fails to start after the AS install? Any suggestion / remedies would be of help.

    hi,
    follow this metalink note you will find out the answer
         Troubleshooting Database Control Startup Issues
         Doc ID:      Note:549079.1
    Thanks,

  • After the recent update for windows the playback has started glitching

    after the recent update for windows the playback has started glitching

    This is a know bug, install FP 1.5 or stop all but 1 clustered CMS (wait up to a minute), then hit update.
    Regards,
    Tim

Maybe you are looking for