XA Transactions Weblogic6.1-SQLServer
Hello. I´m trying to start a XA UserTransaction from a session ejb
(BMT), that involves two entities (each one to a different DB, and
with transaction-type CMT Required).
My server is Weblogic 6.1, and my driver is weblogic JDBC driver for
MS SQLServer, althougth i´ve tried with the Microsoft driver.
Each entity uses a diferent TX DataSource, and i´ve tried putting
"Enable two-phase commit". The result is always the same:
java.sql.SQLException: Connection has already been created in this tx
context for pool named XXXXPool1. Illegal
attempt to create connection from another pool: XXXXPool2
Please, what´s happens? It´s supposed that both drivers supports XA
transactions (i´ve already installed needed stored procedures for
Microsoft Driver)
lots of thanks in advance.
Hi Rafa,
Could you post here definitions of the pools and datasources?
Regards,
Slava Imeshev
"Rafa" <[email protected]> wrote in message
news:[email protected]..
Hello. I´m trying to start a XA UserTransaction from a session ejb
(BMT), that involves two entities (each one to a different DB, and
with transaction-type CMT Required).
My server is Weblogic 6.1, and my driver is weblogic JDBC driver for
MS SQLServer, althougth i´ve tried with the Microsoft driver.
Each entity uses a diferent TX DataSource, and i´ve tried putting
"Enable two-phase commit". The result is always the same:
java.sql.SQLException: Connection has already been created in this tx
context for pool named XXXXPool1. Illegal
attempt to create connection from another pool: XXXXPool2
Please, what´s happens? It´s supposed that both drivers supports XA
transactions (i´ve already installed needed stored procedures for
Microsoft Driver)
lots of thanks in advance.
Similar Messages
-
SSIS script component to use defined connection manager to load data from a Oracle
In SSIS script compoment, I can connect to oracle with hard-coded connectionstring:
OracleConnection conn;
conn = new OracleConnection();
conn.ConnectionString = "Data Source=XE;User ID=hr;Password=******";
however, when I defined an connection managers in the script compoment and call it as follows:
IDTSConnectionManager100 connMgr;
OracleConnection conn;
public override void AcquireConnections(object Transaction)
connMgr = this.Connections.MyADONETConnectionManager;
conn = (OracleConnection)connMgr.AcquireConnection(null);
I got error below:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task source [Script Component C# Oracel HR Oracle [21]]: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'Oracle.DataAccess.Client.OracleConnection'. Instances of types that represent COM
components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
Error at Data Flow Task source [SSIS.Pipeline]: Script Component C# Oracel HR Oracle failed validation and returned error code 0x80004002.
Error at Data Flow Task source [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task source: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
I did not find any example for Orale. A similar SQL server example is as linked below:
http://technet.microsoft.com/en-us/library/ms135939(v=sql.110).aspx
can anybody shed some light? I appreciate it...
thanks,
SteveYou need to create a connectionmanager for Oracle connection and use it within the script task
See
http://www.mssqltips.com/sqlservertip/1787/oracle-parameterized-queries-in-sql-integration-services-ssis/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Error in last step of copy database wizard
Hi All,
I am getting below mentioned error in copy database wizard. I am using SSMS 2012 to copy a database from one server to another server using attach and detach method. Been stuck in this issue for quite sometime. Please provide your insights...
Event Name: OnError
Message: An error occurred while transferring data. See the inner exception for details.
StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer()
InnerException-->There is already an object named 'spt_values' in the database.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection destinationConnection, IEnumerable`1 statements, SqlTransaction transaction)
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
Operator: EMEA\INCHEJAI
Source Name: CDW_BIE-WV200_xxxx_xxxx_35
Source ID: {xxx-xxx-xxx-xxx-xxx}
Execution ID: {xxx-xxx-xxx-xxx-xxx}
Start Time: 24.09.2014 10:38:37
End Time: 24.09.2014 10:38:37
Data Code: 0
P.S - I am able to query and fetch the results for "select * from master.dbo.spt_values;"
in both my SOURCE and DESTINATION databases.
But the table name is not visible under System databases--> master --> Tables --> System Tables in my DESTINATION database alone.
Thanks,
DeeJay007Hi,
Thanks for your response :). When I tried to attach the the database (.mdf and .ldf) and create a new database in DESTINATION server, it works fine. Only using "Copy database wizard" I face this problem. I am attempting this functionality from
the SQL Server 2012 instance
The Instances are not in same version. Find the specific details below for @@Version.
SOURCE Server Instance
Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64)
Sep 21 2011 22:45:45
Copyright (c) 1988-2008 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2) (VM)
DESTINATION Server Instance
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
When you use the copy database functionality, your database gets upgraded to match the destination server version. The database cannot be downgraded, which is fine in your case. It could be a bug in the upgrade process between these two specific sql server
versions though.
Can you make a test with another destination instance, with the same version as the original destination (2012 SP1) just to rule out the possibility of system database corruption?
Does this happen with only a single database, or does the wizzard fail for any database you try to copy?
I have the "u_tables.sql" file which has the scripts for some master database tables. In the process of trying to rebuild the system database and if I lose the master DB contents, will executing the "u_tables.sql" be sufficient to restore
the details?? Many DB's are available in the server, so the risk is very high.
No. However, your application databases won't be affected. You'll lose all your server objects, including but not limited to logins, linked servers, backup triggers, server roles, etc. You'll also lose the contents of the msdb database (jobs, database mail
configurations, backup history, maintenance plans, etc). Please refer to the article I sent you for more information. It contains safety instructions on how to backup most of these objects.
Try to do the tests I suggested above before rebuilding your system databases.
Is there any restrictions for "Copy database wizard" which I am missing here?
No I dont think so. Based on the information you provided, it should be working. -
SQL 2012 Copy Database Wizard fails
I am trying to use the Copy Database Wizard in SQL Server 2012
The host is running SQL Server 2000 (8.00.2066 (SP4)) on a Windows 2003 server
The destination is SQL Server 2012 running on Windows Server 2012 Standard.
Its gets to Execute SQL Server Agent Job and fails with this error:
The job failed. Check the event log on the destination server for details
Fails at – Execute SQL Server Agent Job
I've looked at the application log and not sure which errors are relevant. Here are two of them:
the first is an error, the second a warning.
Log Name: Application
Source: SQLISPackage110
Date: 1/9/2015 11:39:24 AM
Event ID: 12291
Task Category: None
Level: Error
Keywords: Classic
User: NT SERVICE\SQLSERVERAGENT
Computer: SQL2013
Description:
Package "CDW_SQL_SQL2013_7" failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLISPackage110" />
<EventID Qualifiers="16385">12291</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-09T16:39:24.000000000Z" />
<EventRecordID>456924</EventRecordID>
<Channel>Application</Channel>
<Computer>SQL2013</Computer>
<Security UserID="S-1-5-80-344959196-2060754871-2302487193-2804545603-1466107430" />
</System>
<EventData>
<Data>CDW_SQL_SQL2013_7</Data>
</EventData>
</Event>
Log Name: Application
Source: SQLSERVERAGENT
Date: 1/9/2015 11:39:26 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL2013
Description:
SQL Server Scheduled Job 'CDW_SQL_SQL2013_7_1' (0xDFA5EEDDB2D53A4FB3C7CED04563896E) - Status: Failed - Invoked on: 2015-01-09 11:39:18 - Message: The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">208</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-09T16:39:26.000000000Z" />
<EventRecordID>456927</EventRecordID>
<Channel>Application</Channel>
<Computer>SQL2013</Computer>
<Security />
</System>
<EventData>
<Data>CDW_SQL_SQL2013_7_1</Data>
<Data>0xDFA5EEDDB2D53A4FB3C7CED04563896E</Data>
<Data>Failed</Data>
<Data>2015-01-09 11:39:18</Data>
<Data>The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).</Data>
</EventData>
</Event>
Any ideas would be appreciated. I'm anxious to retire this old SQL 2000 server!
MikeThanks David.
is this the log you are looking for:
Date 1/9/2015 11:39:18 AM
Log Job History (CDW_SQL_SQL2013_7_1)
Step ID 1
Server SQL2013
Job Name CDW_SQL_SQL2013_7_1
Step Name CDW_SQL_SQL2013_7_1_Step
Duration 00:00:08
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:39:18 AM Progress:
2015-01-09 11:39:18.61 Source: sql_SQL2013_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-01-09 11:39:24.50 Code: 0x00000000
Source: sql_SQL2013_Transfer Objects Task Description: An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer() InnerException-->The specified schema name "INFORMATION_SCHEMA" either does not exist or you do not have permission to use it.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1
completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection
destinationConnection, IEnumerable`1 statements, SqlTransaction transaction) at Microsoft.SqlServer.Management.Smo.Transfer.TransferData() End Error Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer
Objects Task Database transfer failed for one or more extra objects.: 0% complete End Progress Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer Objects Task
Transfer objects finished execution.: 100% complete End Progress Warning: 2015-01-09 11:39:24.52 Code: 0x80019002 Source: CDW_SQL_SQL2013_7 Description: SSIS Warning
Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change
the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:39:18 AM Finished: 11:39:24 AM Elapsed: 6.062 seconds. The package execution failed.
The step failed.
I will also look into backup/restore. Will that work between 2000 and 2012? -
SQL Server Agent job fails with error : The package execution returned DTSER_FAILURE (1).
Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Connecting BI 7.0 with SQL server R2
I get the error below when I try to link the open hub destination with the sql server r2. I am able to view the data correctly in preview mode but when I execute the package in realtime mode I get the below error. Any help is greatly appreciated. I have followed the steps from http://msdn.microsoft.com/en-us/library/dd299430.aspx
Microsoft.SqlServer.Dts.SapBw.
Components.SapBwSourceOHS, Microsoft.SqlServer.SapBiComponents, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91
[BI Source [226]] Error: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at Microsoft.SqlServer.Dts.SapBw.Connectivity.RFCAPI.RfcOpenEx(String conn_param, RFC_ERROR_INFO_EX& error_info)
at Microsoft.SqlServer.Dts.SapBw.Connectivity.R3Connection.Open(String ConnectionString)
at Microsoft.SqlServer.Dts.SapBw.ConnectionManager.SapBwConnectionManager.AcquireConnection(Object txn)
at Microsoft.SqlServer.Dts.Runtime.ConnectionManager.AcquireConnection(Object txn)
at Microsoft.SqlServer.Dts.SapBw.Components.SapBwPipelineComponent.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
Thank you.I saw this error when implementing this white paper previously. I believe we ended up using the 32 bit version of SQL Server, and we might have ended up using R1 to get it to function.
The problem is actually with the librfc32.dll...I don't believe it's compatible with SSIS 64-bit. -
Command msdtc -tmMappingSet is not working
I am having a two node foc cluster(win2k12r2),
I have installed the SQL server(MSSQLSERVER) under foc. Now I have two Highly available DTC resources "DTC1" and "'DTC2". I have made DTC1 as the cluster default DTC and I added DTC2 in the the sql server(MSSQLSERVER) group.
Now when ever I run the distributed transaction from the sqlserver(MSSQLSERVER) the DTC2 coordinates the distribution.
Now I have installed one more sql server instance(LOCALSQLSERVER) , and if I run any distributed transaction from this sql server(LOCALSQLSERVER) the DTC1 is coordinates the transaction.
Now I want to map DTC2 to LOCALSQLSERVER using the command
Msdtc -tmMappingSet -name "Mapping1" -service "MSSQL$LOCALSQLSERVER" -ClusterResourceName "DTC2"
But the it fails and the error in eventvwr is "invalid command line arguments".
I also tried following command but it ends with same error
Msdtc -tmMappingSet -name "Mapping1" -service "MSSQL$LOCALSQLSERVER" -localHi PuneDev,
Please remove all '-' and retype them back.
If you copied the tmMappingSet command from somewhere such as Outlook or Notepad, the command may not work. No error is reported in the output. However if you look at the application event log you will notice an error was logged:"invalid command line
arguments".
If that happens, simply remove all '-' and retype them back. It has something to do with encoding format.
Refer to:
http://blogs.msdn.com/b/distributedservices/archive/2010/03/25/import-of-microsoft-distributed-transaction-coordinator-ms-dtc-transaction-failed-0x8004d00e-xact-e-notransaction.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Could not create a managed connection manager ; SSIS package from SSMS - Windows 7 64 bit
I created connection as Oracle provider for .Net.
In data flow, using the ado net source. select data access mode as SQL command.
When click preview. data is coming.
But when right click the dataflow task --> execute task.
data flow is failed with following error
[ADO NET Source [1]] Error: Microsoft.SqlServer.Dts.Runtime.DtsCouldNotCreateManagedConnectionException: Could not create a managed connection manager. at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String
connStr, Object transaction) at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100
wrapper, Object transaction)Do you run it under 64bit?
if yes, go to Project menu, select project properties.
in the project properties window, go to Debugging tab, and set Run64BitRuntime as false. and try again.
http://www.rad.pasfu.com -
I have written following lines of code, but when TransferData() method is called, it generates error "Property LoginSecure cannot be changed or read after a connection string has been set."
Can anybody help me? Thanks in advance....
Code:
//1. Create Transfer Object
Transfer transObj = new Transfer();
//transObj=new Transfer(server.Databases[fromdatabasename]);
transObj.DestinationLoginSecure = false;
transObj.DestinationLogin = "sa";
transObj.DestinationPassword = "test";
//Set Destination Server
//Build a "serverConnection" with the information of the "sqlConnection"
destSrvCon =
new ServerConnection(sqlCon);
//The serverConnection is used in the ctor of the Server.
destServer = new Server(destSrvCon);
transObj.DestinationServer = destServer.Name.ToString();
//2. Define Transfer Object's Properties
transObj.Database = server.Databases["Aworks"];
transObj.DestinationDatabase = "AWorksCopy";
transObj.Options.WithDependencies =true;
transObj.Options.ContinueScriptingOnError = true;
transObj.CopySchema = true;
transObj.CopyData = true;
transObj.CopyAllTables = true;
//4. Finally Transfer Data
transObj.TransferData();
//transObj.ScriptTransfer();Hi ,
For Dan : thanks for the link you provided , but , maybe , you have done a little error with it as I am arriving on the page with the title "Preparing the Snapshot Folder".
For Ritesh , please , could you provide the full list of the exceptions which occurred for this error ?
One possibility could to display the stacktrace which is giving something something like that ( it is an example coming from another thread of this forum , which I am following ) ?
Message: An error occurred while transferring data. See the inner exception for details.
StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSMOTransfer()
InnerException-->Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection destinationConnection, IEnumerable`1 statements, SqlTransaction transaction)
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
InnerException-->The wait operation timed out
It is always a good way to use a try / catch to catch at least the SqlException, SmoException and Exception errors.
About your error message , I found this old thread :
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/639011d5-c413-4d3c-acdf-d3480ad751b9/datatransfer-error?forum=sqlsmoanddmo
Maybe it could help you to solve your problem.
Don't forget that when you are using the Server class , all the methods of this class are relying on the SqlClient namespace including the classes SqlConnection , SqlException or SqlCommand ( it is why to trap the SqlException errors is always useful )
See also
http://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.connectionstring(v=vs.110).aspx
and http://steveverschaeve.be.s170058.gridserver.com/?cat=20
If I find other potentially useful links , I will post them later.
Have a nice day
Mark Post as helpful if it provides any help.Otherwise,leave it as it is. -
PERFMON and XML file (template)
LS,
Creating a PERFMON data collection set and running PERFMON works fine.
When I extract this data collection set to a XML template and import it on another (completely identical) server not all collection items defined are recording data (some of them remain blanc while the original set is recording data (even "0 " values)).
Recreating a new user defined collector set on the same server based upon the original set (using the XML template I made from it ) will still not show me all the data which is in the original set......
What do I miss ????
Who can help me out on this.
Regards,
Guus KramerElton,
Yes I did - adding a complete setl manual worked fine but importing the XML file (which is exactly identical) failed.
I also tried to import the XML file, running the PERFMON, see fields are missing, dropping these fields from PERFMON and adding them back again through the PREFMON GUI and this worked !!
So I'm wondering what is wrong importing the PERFMON XML file (using it on the same server or using it on a different server) ?????
Regards,
Guus
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<?xml version="1.0" encoding="UTF-16"?>
<DataCollectorSet>
<Status>0</Status>
<Duration>0</Duration>
<Description>
</Description>
<DescriptionUnresolved>
</DescriptionUnresolved>
<DisplayName>
</DisplayName>
<DisplayNameUnresolved>
</DisplayNameUnresolved>
<SchedulesEnabled>-1</SchedulesEnabled>
<LatestOutputLocation>S:\Permon_log\175_PERFMON 2008_2012\NCPRDSQLDB02_20140929-000004</LatestOutputLocation>
<Name>175_PERFMON 2008_2012</Name>
<OutputLocation>S:\Permon_log\175_PERFMON 2008_2012\NCPRDSQLDB02_20140929-000005</OutputLocation>
<RootPath>S:\Permon_log\175_PERFMON 2008_2012</RootPath>
<Segment>0</Segment>
<SegmentMaxDuration>0</SegmentMaxDuration>
<SegmentMaxSize>0</SegmentMaxSize>
<SerialNumber>5</SerialNumber>
<Server>
</Server>
<Subdirectory>
</Subdirectory>
<SubdirectoryFormat>3</SubdirectoryFormat>
<SubdirectoryFormatPattern>yyyyMMdd\-NNNNNN</SubdirectoryFormatPattern>
<Task>
</Task>
<TaskRunAsSelf>0</TaskRunAsSelf>
<TaskArguments>
</TaskArguments>
<TaskUserTextArguments>
</TaskUserTextArguments>
<UserAccount>SYSTEM</UserAccount>
<Security>O:BAG:DUD:AI(A;;FA;;;SY)(A;;FA;;;BA)(A;;FR;;;LU)(A;;0x1301ff;;;S-1-5-80-2661322625-712705077-2999183737-3043590567-590698655)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;0x1200ab;;;LU)(A;ID;FR;;;AU)(A;ID;FR;;;LS)(A;ID;FR;;;NS)</Security>
<StopOnCompletion>0</StopOnCompletion>
<PerformanceCounterDataCollector>
<DataCollectorType>0</DataCollectorType>
<Name>DataCollector01</Name>
<FileName>DataCollector01</FileName>
<FileNameFormat>0</FileNameFormat>
<FileNameFormatPattern>
</FileNameFormatPattern>
<LogAppend>0</LogAppend>
<LogCircular>0</LogCircular>
<LogOverwrite>0</LogOverwrite>
<LatestOutputLocation>S:\Permon_log\175_PERFMON 2008_2012\NCPRDSQLDB02_20140929-000004\DataCollector01.tsv</LatestOutputLocation>
<DataSourceName>
</DataSourceName>
<SampleInterval>1</SampleInterval>
<SegmentMaxRecords>0</SegmentMaxRecords>
<LogFileFormat>1</LogFileFormat>
<Counter>\Memory\Available MBytes</Counter>
<Counter>\Memory\Page Faults/sec</Counter>
<Counter>\Memory\Page Reads/sec</Counter>
<Counter>\Memory\Page Writes/sec</Counter>
<Counter>\Network Interface(*)\Bytes Received/sec</Counter>
<Counter>\Network Interface(*)\Bytes Sent/sec</Counter>
<Counter>\Network Interface(*)\Output Queue Length</Counter>
<Counter>\PhysicalDisk(0 C:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(1 D:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(2 E:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(3 F:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(4 K:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(5 L:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(6 S:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(7 T:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(8 U:)\Avg. Disk sec/Read</Counter>
<Counter>\PhysicalDisk(0 C:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(1 D:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(2 E:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(3 F:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(4 K:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(5 L:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(6 S:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(7 T:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(8 U:)\Avg. Disk sec/Write</Counter>
<Counter>\PhysicalDisk(_Total)\Disk Reads/sec</Counter>
<Counter>\PhysicalDisk(_Total)\Disk Writes/sec</Counter>
<Counter>\Process(sqlservr)\% Processor Time</Counter>
<Counter>\Processor(_Total)\% Processor Time</Counter>
<Counter>\SQLServer:Buffer Manager\Free pages</Counter>
<Counter>\SQLServer:Buffer Manager\Page life expectancy</Counter>
<Counter>\SQLServer:Buffer Manager\Page lookups/sec</Counter>
<Counter>\SQLServer:Buffer Manager\Page reads/sec</Counter>
<Counter>\SQLServer:Buffer Manager\Page writes/sec</Counter>
<Counter>\SQLServer:Database Mirroring(_Total)\*</Counter>
<Counter>\SQLServer:Databases(NSafe)\Active Transactions</Counter>
<Counter>\SQLServer:Databases(NSafe)\Transactions/sec</Counter>
<Counter>\SQLServer:General Statistics\Active Temp Tables</Counter>
<Counter>\SQLServer:General Statistics\Logical Connections</Counter>
<Counter>\SQLServer:General Statistics\Logins/sec</Counter>
<Counter>\SQLServer:General Statistics\Transactions</Counter>
<Counter>\SQLServer:General Statistics\User Connections</Counter>
<Counter>\SQLServer:Locks(_Total)\Lock Requests/sec</Counter>
<Counter>\SQLServer:Locks(_Total)\Lock Wait Time (ms)</Counter>
<Counter>\SQLServer:Locks(_Total)\Lock Waits/sec</Counter>
<Counter>\SQLServer:Memory Manager\Target Server Memory (KB)</Counter>
<Counter>\SQLServer:Memory Manager\Total Server Memory (KB)</Counter>
<Counter>\SQLServer:SQL Statistics\Batch Requests/sec</Counter>
<Counter>\SQLServer:SQL Statistics\SQL Compilations/sec</Counter>
<Counter>\SQLServer:SQL Statistics\SQL Re-Compilations/sec</Counter>
<CounterDisplayName>\Memory\Available MBytes</CounterDisplayName>
<CounterDisplayName>\Memory\Page Faults/sec</CounterDisplayName>
<CounterDisplayName>\Memory\Page Reads/sec</CounterDisplayName>
<CounterDisplayName>\Memory\Page Writes/sec</CounterDisplayName>
<CounterDisplayName>\Network Interface(*)\Bytes Received/sec</CounterDisplayName>
<CounterDisplayName>\Network Interface(*)\Bytes Sent/sec</CounterDisplayName>
<CounterDisplayName>\Network Interface(*)\Output Queue Length</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(0 C:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(1 D:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(2 E:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(3 F:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(4 K:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(5 L:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(6 S:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(7 T:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(8 U:)\Avg. Disk sec/Read</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(0 C:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(1 D:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(2 E:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(3 F:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(4 K:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(5 L:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(6 S:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(7 T:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(8 U:)\Avg. Disk sec/Write</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(_Total)\Disk Reads/sec</CounterDisplayName>
<CounterDisplayName>\PhysicalDisk(_Total)\Disk Writes/sec</CounterDisplayName>
<CounterDisplayName>\Process(sqlservr)\% Processor Time</CounterDisplayName>
<CounterDisplayName>\Processor(_Total)\% Processor Time</CounterDisplayName>
<CounterDisplayName>\SQLServer:Buffer Manager\Free pages</CounterDisplayName>
<CounterDisplayName>\SQLServer:Buffer Manager\Page life expectancy</CounterDisplayName>
<CounterDisplayName>\SQLServer:Buffer Manager\Page lookups/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:Buffer Manager\Page reads/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:Buffer Manager\Page writes/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:Database Mirroring(_Total)\*</CounterDisplayName>
<CounterDisplayName>\SQLServer:Databases(NSafe)\Active Transactions</CounterDisplayName>
<CounterDisplayName>\SQLServer:Databases(NSafe)\Transactions/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:General Statistics\Active Temp Tables</CounterDisplayName>
<CounterDisplayName>\SQLServer:General Statistics\Logical Connections</CounterDisplayName>
<CounterDisplayName>\SQLServer:General Statistics\Logins/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:General Statistics\Transactions</CounterDisplayName>
<CounterDisplayName>\SQLServer:General Statistics\User Connections</CounterDisplayName>
<CounterDisplayName>\SQLServer:Locks(_Total)\Lock Requests/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:Locks(_Total)\Lock Wait Time (ms)</CounterDisplayName>
<CounterDisplayName>\SQLServer:Locks(_Total)\Lock Waits/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:Memory Manager\Target Server Memory (KB)</CounterDisplayName>
<CounterDisplayName>\SQLServer:Memory Manager\Total Server Memory (KB)</CounterDisplayName>
<CounterDisplayName>\SQLServer:SQL Statistics\Batch Requests/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:SQL Statistics\SQL Compilations/sec</CounterDisplayName>
<CounterDisplayName>\SQLServer:SQL Statistics\SQL Re-Compilations/sec</CounterDisplayName>
</PerformanceCounterDataCollector>
<DataManager>
<Enabled>0</Enabled>
<CheckBeforeRunning>0</CheckBeforeRunning>
<MinFreeDisk>0</MinFreeDisk>
<MaxSize>0</MaxSize>
<MaxFolderCount>0</MaxFolderCount>
<ResourcePolicy>0</ResourcePolicy>
<ReportFileName>report.html</ReportFileName>
<RuleTargetFileName>report.xml</RuleTargetFileName>
<EventsFileName>
</EventsFileName>
</DataManager>
</DataCollectorSet> -
SSIS Error with Oracle 10.2 in 64Bit environment
I am trying to debug a SSIS package in BIDS which was developed in a 32 Bit environment. The machine on which I am trying to bebug is a 64Bit with Windows 2003. Our DBA has installed both the 64 Bit as well as the 32 Bit client on the 64bit machine.
When I open the package in BIDS, I am able to see the list of providers. I can create a data source using .NET Providers for Oledb\Oracle Provider for OLE DB and when I click the TEST button, the test succeeds. However, when I try to bebug the package, it errors out with the following error.
[bill_to_dim [83]] Error: System.InvalidOperationException: The 'OraOLEDB.Oracle.1' provider is not registered on the local machine. at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
I have checked to ensure that the oraOLEDB10.dll is registered on the machine. the Oracle\Home folder has full rights
What I dont understand is that if the connection succeeds in Design time why does it fail at Run Time.
Any help will be appreciated.
Thanks!
ABjy**** wrote:
I've resolved this legendary issue recently.
You have to uninstall 10.2 but install Oracle 11g client 32bit & 64bit both <font face="tahoma,verdana,sans-serif" size="1" color="#000">version</font> and have to change registry little bit.
For some reason my colleague fixed that issue with some patches on Oracle 10g installation, but that doesn't work for me...
Please refer to the link for detail...
[http://knol.google.com/k/jeyong-park/accessing-oracle-data-source-from-64bit]
Edited by: [email protected] on Sep 24, 2009 5:51 PM
Nice writing, Thanks for your instruction! -
Problems related to SQL application migration from 6.5 to 7.0
we have developed our application with D2K as the front end and MS-SQL6.5 server as the database. We are trying to migrate the application to MS-SQL7.0 server as the database.
The following are the limitations we are facing
1) It has been seen that whenever an Insert statement is executed against a table, the table is getting locked and it is not possible to execute subsequent DML statements until the insert lock on the table has been released.
2) Whenever a particular row is selected, then that row is getting locked and it is not able to select the same row again.
From these two observations, we came to a conclusion that in SQLSERVER 6.5, process-id will be assigned for a Batch and the LOCK will be created for the batch and hence two users cannot simultaneously commit the transaction and in SQLSERVER 7.0 each DML Statement in a Batch is given a process-id and the LOCK will be created for each DML Statement, the LOCK will be released only when a commit statement is issued. So the DML Statements which refer to the table that has been locked will be in a deadlock situation. That is the reason why the system is getting hanged.
please post us with a possible solution for the above situation at the earliest.Krish,
I would think since your question is more related to SQL Server instead of the Oracle products you're using, that you might be better off to search Microsoft's Knowledgebase. -
SSIS Package with Scheduled Task
Hi there,
We have on a SQL-Server some SSIS Packages which refers to Navision. If I start the job manually directly in Navision, it works fine. If I start the Job in MSSQL manually (SQL Server Agent --> Jobs --> 'MyJobPackage' --> Start Job at Setp) or through
the Job Activity Monitor ('MyJobPackage' --> Start Job at Step) it works also fine without any problems. But if the Job starts automatically (Scheduled Job in MSSQL) it will never end. So the Job is running endless. Now, we thought we could try to start
this SQL Job with a Scheduled Task in Windows. So I created a cmd-File with the following line:
dtexec /f "E:\SSIS Schnittstelle\TEST_Navision2XAPF\Navision2X.APF\bin\EGHU.dtsx" /De MyPassword
And then I get this errors:
C:\Users\exprma\Desktop>dtexec /f "E:\SSIS Schnittstelle\TEST_Navision2XAPF\Navision2X.APF\bin\EGHU.dtsx" /De MyPassword
Microsoft (R) SQL Server Execute Package Utility
Version 10.50.2500.0 for 64-bit
Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 10:17:44
Progress: 2014-03-12 10:17:45.32
Source: Dimensionen
Validating: 0% complete
End Progress
Error: 2014-03-12 10:17:45.34
Code: 0xC0047062
Source: Dimensionen Dimension [134]
Description: System.Data.Odbc.OdbcException: ERROR [IM014] [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application
at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)
at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle)
at System.Data.Odbc.OdbcConnectionOpen..ctor(OdbcConnection outerConnection, OdbcConnectionString connectionOptions)
at System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.Odbc.OdbcConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error
Error: 2014-03-12 10:17:45.34
Code: 0xC0047017
Source: Dimensionen SSIS.Pipeline
Description: component "Dimension" (134) failed validation and returned error code 0x80131937.
End Error
Progress: 2014-03-12 10:17:45.34
Source: Dimensionen
Validating: 4% complete
End Progress
Error: 2014-03-12 10:17:45.34
Code: 0xC004700C
Source: Dimensionen SSIS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2014-03-12 10:17:45.34
Code: 0xC0024107
Source: Dimensionen
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 10:17:44
Finished: 10:17:45
Elapsed: 0.999 seconds
So what could I try at the next step?
Regards
ÖFESHi Öfes,
Based on the error message when executing the package from batch file and the solution provided by Visakh, we can conclude that the package uses 32-bit ODBC drivers. Now let’s go back to the original SQL Server Agent job issue. Since you can run the job
manually from SSMS, the package should run in 32-bit SSIS runtime mode, e.g. the “Use 32 bit runtime” option should be checked for the package executions with in the job step. In this case, SSIS automatically uses the 32-bit DTExec utility, therefore, we don’t
need to specify the 32-bit DTExec utility in the command line for the job step.
Based on the current information, the issue may occur due to two possible factors:
The Dimension component in the package uses User DSN rather than System DSN.
The user account under which the job runs doesn’t have sufficient permissions to execute the package.
So, please try the following steps:
Open the C:\Windows\SysWOW646\odbcad32.exe, and make sure the DSN is a System DSN which can be accessed by any user on the server.
Create a new SQL Server Agent proxy account which has sufficient permissions to execute the package, for example, the user account that you execute the job manually from SSMS.
Reference:
http://technet.microsoft.com/en-us/library/ms190698(v=sql.105).aspx
Regards,
Mike Yin
TechNet Community Support -
Hello guys,
I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
me out.
I hope you guys can help me to find a way to solve it.
- I tried different version of the jdbc driver 3.0 and 4.0.
- I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
for SQLXAUser), I am quite sure because it was running for one month without any problem.
I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
Also I tried this link out but did not help me.
<a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
The exception is the following:
[2014-05-15 14:06:08,842] INFO 3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
[2014-05-15 14:06:08,951] INFO 3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
[2014-05-15 14:06:10,324] INFO 5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
[2014-05-15 14:06:12,742] WARN 7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties. Using defaults for all Dozer global properties.
[2014-05-15 14:06:13,288] WARN 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
[2014-05-15 14:06:13,288]ERROR 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
[2014-05-15 14:06:13,319]ERROR 8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
org.hibernate.exception.GenericJDBCException: could not execute query
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
at org.mortbay.jetty.Server.doStart(Server.java:224)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mortbay.start.Main.invokeMain(Main.java:194)
at org.mortbay.start.Main.start(Main.java:534)
at org.mortbay.start.Main.start(Main.java:441)
at org.mortbay.start.Main.main(Main.java:119)
Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
at org.hibernate.loader.Loader.doList(Loader.java:2235)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
at org.hibernate.loader.Loader.list(Loader.java:2124)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
... 33 more
Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
at $Proxy29.prepareStatement(Unknown Source)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
at org.hibernate.loader.Loader.doQuery(Loader.java:696)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
at org.hibernate.loader.Loader.doList(Loader.java:2232)
... 52 more
Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
error=XAER_RMERR
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
... 66 more
<b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
... 68 more
I think the "bold" exception is the key.
Also the configuration file of my jetty server.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
<!-- developpment jetty configuration -->
<!-- launch with main class : org.mortbay.start.Main app arguments:
deploy-conf/jetty-conf/mysql/jetty-dev.xml vm arguments : -Xmx1024M -DSTOP.KEY=stop
-DSTOP.PORT=6669 to stop : - - stop -Xmx1024M -DSTOP.KEY=stop -DSTOP.PORT=6669 -->
<Configure id="Server" class="org.mortbay.jetty.Server">
<Array id="plusConfig" type="java.lang.String">
<Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
<Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
<Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
</Array>
<Array id="serverClasses" type="java.lang.String">
</Array>
<Array id="systemClasses" type="java.lang.String">
</Array>
<!-- web apps -->
<Set name="handler">
<New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
<Set name="handlers">
<Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">
<!-- wrapper server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
<Arg>/myscript-form-wrapper-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- form server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-form-server.war
</Arg>
<Arg>/myscript-form-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- hwr server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
<Arg>/myscript-form-hwr-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
</Array>
</Set>
</New>
</Set>
<Call name="addConnector">
<Arg>
<New class="org.mortbay.jetty.nio.SelectChannelConnector">
<Set name="port">8080</Set>
</New>
</Arg>
</Call>
<!-- Use the jdk 1.5 platformMBeanServer -->
<Call id="MBeanServer" class="java.lang.management.ManagementFactory"
name="getPlatformMBeanServer" />
<Get id="Container" name="container">
<Call name="addEventListener">
<Arg>
<New class="org.mortbay.management.MBeanContainer">
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</New>
</Arg>
</Call>
</Get>
<!-- Setup the RMIRegistry on a specific port -->
<Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
name="createRegistry">
<Arg type="int">2099</Arg>
</Call>
<!-- Setup the JMXConnectorServer on a specific rmi server port -->
<Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
name="newJMXConnectorServer">
<Arg>
<New class="javax.management.remote.JMXServiceURL">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
</Arg>
<Arg />
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</Call>
<!--************************* -->
<!-- embbeded ActiveMQ Broker -->
<!--************************* -->
<New id="brokerService" class="org.apache.activemq.broker.BrokerService">
<Set name="brokerName">fppBrokerActiveMQ</Set>
<Set name="dataDirectoryFile"></Set>
<Call name="getSystemUsage">
<Call name="getMemoryUsage">
<Set name="limit">26428800</Set>
</Call>
<Call name="getStoreUsage">
<Set name="limit">204857600</Set>
</Call>
</Call>
<Call name="addConnector">
<Arg>nio://localhost:61615</Arg>
</Call>
<Call name="start"></Call>
</New>
<!-- ************************** -->
<!-- common fpp jndi resources -->
<!-- ************************** -->
<!-- ui debug properties -->
<New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.common-ui.velocityProperties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
</Put>
<Put name="spring.resource.loader.cache">false</Put>
<Put name="velocimacro.library.autoreload">true</Put>
</New>
</Arg>
</New>
<New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.wrapper-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
</Put>
<Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
</Put>
<Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
</Put>
<Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
</New>
</Arg>
</New>
<!-- transaction manager - bitronix -->
<Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
<Set name="serverId">jetty-fpp-server</Set>
<Set name="gracefulShutdownInterval">45</Set>
<Set name="logPart1Filename">btm/btm1.tlog</Set>
<Set name="logPart2Filename">btm/btm2.tlog</Set>
</Call>
<Set name="gracefulShutdown">60000</Set>
<Call name="addLifeCycle">
<Arg>
<New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
</Arg>
</Call>
<New class="org.mortbay.jetty.plus.naming.Transaction">
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/UserTransaction</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<!-- database data source -->
<New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
<Set name="uniqueName">fppDataSource</Set>
<Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
<Set name="minPoolSize">0</Set>
<Set name="maxPoolSize">50</Set>
<Get name="driverProperties">
<Put name="serverName">DYHVDB01</Put>
<Put name="instanceName">ALPHA</Put>
<Put name="integratedSecurity">false</Put>
<Put name="databaseName">tdb_digipen_fpp</Put>
<Put name="user">manage_digipen</Put>
<Put name="password">5T1fte?</Put>
<!--Needed to test??<Put name="pinGlobalTxToPhysicalConnection">true</Put>-->
</Get>
<Call name="init" />
</New>
<!-- Jms connection factories -->
<New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
<Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
<Set name="uniqueName">fppServerConnectionFactory</Set>
<Set name="minPoolSize">4</Set>
<Set name="maxPoolSize">40</Set>
<Set name="allowLocalTransactions">true</Set>
<Get name="driverProperties">
<Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Get>
<Call name="init" />
</New>
<!-- JMS Queues & topics -->
<New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/formNotifiationTopic</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQTopic">
<Arg>formNotifiationTopic</Arg>
</New>
</Arg>
</New>
<New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldNotifJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldNotifJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/inkJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>inkJmsQueue</Arg>
</New>
</Arg>
</New>
<!-- native library services -->
<New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptLicenseService</Arg>
<Arg>
<New
class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
<Arg>localhost</Arg>
</New>
</Arg>
</New>
<!-- *********************** -->
<!-- form server properties -->
<!-- *********************** -->
<New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.form.defaultEnvironmentName">default</Put>
<Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
<Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
<Put name="fpp.form.field.notif.nbconsumers">2</Put>
<Put name="fpp.form.ink.nbconsumers">2</Put>
<Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
<Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<!--<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>-->
<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
<Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
<Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
</Put>
<Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
<Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>
<!-- Cron Format A cron expression is a string comprised of 6 or 7 fields
separated by white space. Fields can contain any of the allowed values, along
with various combinations of the allowed special characters for that field.
The fields are as follows: Field Name Mandatory Allowed Values Allowed Special
Characters Seconds YES 0-59 , - * / Minutes YES 0-59 , - * / Hours YES 0-23
, - * / Day of month YES 1-31 , - * ? / L W Month YES 1-12 or JAN-DEC , -
* / Day of week YES 1-7 or SUN-SAT , - * ? / L # Year NO empty, 1970-2099
, - * / -->
<Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
<Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
<Put name="fpp.form.purge.instances.defaultcase">365</Put>
<Put name="fpp.form.purge.instances.case1">10</Put>
<Put name="fpp.form.purge.instances.case2">60</Put>
<Put name="fpp.form.purge.instances.case3">100</Put>
<Put name="fpp.form.purge.instances.case4">30</Put>
<Put name="fpp.form.purge.instances.case5">60</Put>
<Put name="fpp.form.export.cron">0 0 * * * ?</Put>
<Put name="fpp.form.export.exportpath">C:\FPP</Put>
<Put name="fpp.form.export.exportMode">REGULAR</Put>
<Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
<Put name="fpp.form.export.addInformations">true</Put>
</New>
</Arg>
</New>
<New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppFormDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource"></Ref>
</Arg>
</New>
<New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppJbpmDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource" />
</Arg>
</New>
<New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formJmsTopicConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- HWR SERVER -->
<New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.hwr-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
<Put name="fpp.hwr-server.fieldConsumers">4</Put>
<Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
<Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
<Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
<Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
<Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
<Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put
name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
</New>
</Arg>
</New>
<New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptHwrService</Arg>
<Arg>
<New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
<Set name="handwritingContextUserLimit">50</Set>
<Set name="resourceUserLimit">0</Set>
<Set name="otherObjectUserLimit">500</Set>
<Call name="doStart" />
</New>
</Arg>
</New>
<New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- wrapper -->
<New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<Set name="brokerURL">nio://localhost:61615</Set>
<Set name="redeliveryPolicy">
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Set>
</New>
<New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formNotificationConsumerFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<!-- JMX/SENSORS -->
<New id="inkJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="inkJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
</Arg>
</New>
<New id="fieldNotifJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
</Arg>
</New>
<New id="fieldJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
</Arg>
</New>
<New id="formNotifiationTopicUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="formNotifiationTopicObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
</Arg>
</New>
<New id="server.list" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="WRP">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8081</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="FORM">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8080</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="HWR">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8083</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
</New>
<New id="fpp.form.jmx.properties" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="inkJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="inkJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="inkJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="inkJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="inkJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
<!--FieldNotifJmsQueue -->
<Put name="fieldNotifJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="fieldNotifJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="fieldNotifJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
</New>
<New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.ui.parameters</Arg>
<Arg>
<New
class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
<Set name="jmxProperties">
<Ref id="fpp.form.jmx.properties"></Ref>
</Set>
<Set name="serverList">
<Ref id="server.list"></Ref>
</Set>
</New>
</Arg>
</New>
</Configure>
Thanks so much in advance.
Hello guys,
I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
me out.
I hope you guys can help me to find a way to solve it.
- I tried different version of the jdbc driver 3.0 and 4.0.
- I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
for SQLXAUser), I am quite sure because it was running for one month without any problem.
I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
Also I tried this link out but did not help me.
<a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
The exception is the following:
[2014-05-15 14:06:08,842] INFO 3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
[2014-05-15 14:06:08,951] INFO 3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
[2014-05-15 14:06:10,324] INFO 5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
[2014-05-15 14:06:12,742] WARN 7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties. Using defaults for all Dozer global properties.
[2014-05-15 14:06:13,288] WARN 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
[2014-05-15 14:06:13,288]ERROR 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
[2014-05-15 14:06:13,319]ERROR 8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
org.hibernate.exception.GenericJDBCException: could not execute query
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
at org.mortbay.jetty.Server.doStart(Server.java:224)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mortbay.start.Main.invokeMain(Main.java:194)
at org.mortbay.start.Main.start(Main.java:534)
at org.mortbay.start.Main.start(Main.java:441)
at org.mortbay.start.Main.main(Main.java:119)
Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
at org.hibernate.loader.Loader.doList(Loader.java:2235)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
at org.hibernate.loader.Loader.list(Loader.java:2124)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
... 33 more
Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
at $Proxy29.prepareStatement(Unknown Source)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
at org.hibernate.loader.Loader.doQuery(Loader.java:696)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
at org.hibernate.loader.Loader.doList(Loader.java:2232)
... 52 more
Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
error=XAER_RMERR
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
... 66 more
<b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
... 68 more
I think the "bold" exception is the key.
Also the configuration file of my jetty server.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
<!-- developpment jetty configuration -->
<!-- launch with main class : org.mortbay.start.Main app arguments:
deploy-conf/jetty-conf/mysql/jetty-dev.xml vm arguments : -Xmx1024M -DSTOP.KEY=stop
-DSTOP.PORT=6669 to stop : - - stop -Xmx1024M -DSTOP.KEY=stop -DSTOP.PORT=6669 -->
<Configure id="Server" class="org.mortbay.jetty.Server">
<Array id="plusConfig" type="java.lang.String">
<Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
<Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
<Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
</Array>
<Array id="serverClasses" type="java.lang.String">
</Array>
<Array id="systemClasses" type="java.lang.String">
</Array>
<!-- web apps -->
<Set name="handler">
<New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
<Set name="handlers">
<Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">
<!-- wrapper server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
<Arg>/myscript-form-wrapper-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- form server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-form-server.war
</Arg>
<Arg>/myscript-form-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- hwr server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
<Arg>/myscript-form-hwr-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
</Array>
</Set>
</New>
</Set>
<Call name="addConnector">
<Arg>
<New class="org.mortbay.jetty.nio.SelectChannelConnector">
<Set name="port">8080</Set>
</New>
</Arg>
</Call>
<!-- Use the jdk 1.5 platformMBeanServer -->
<Call id="MBeanServer" class="java.lang.management.ManagementFactory"
name="getPlatformMBeanServer" />
<Get id="Container" name="container">
<Call name="addEventListener">
<Arg>
<New class="org.mortbay.management.MBeanContainer">
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</New>
</Arg>
</Call>
</Get>
<!-- Setup the RMIRegistry on a specific port -->
<Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
name="createRegistry">
<Arg type="int">2099</Arg>
</Call>
<!-- Setup the JMXConnectorServer on a specific rmi server port -->
<Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
name="newJMXConnectorServer">
<Arg>
<New class="javax.management.remote.JMXServiceURL">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
</Arg>
<Arg />
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</Call>
<!--************************* -->
<!-- embbeded ActiveMQ Broker -->
<!--************************* -->
<New id="brokerService" class="org.apache.activemq.broker.BrokerService">
<Set name="brokerName">fppBrokerActiveMQ</Set>
<Set name="dataDirectoryFile"></Set>
<Call name="getSystemUsage">
<Call name="getMemoryUsage">
<Set name="limit">26428800</Set>
</Call>
<Call name="getStoreUsage">
<Set name="limit">204857600</Set>
</Call>
</Call>
<Call name="addConnector">
<Arg>nio://localhost:61615</Arg>
</Call>
<Call name="start"></Call>
</New>
<!-- ************************** -->
<!-- common fpp jndi resources -->
<!-- ************************** -->
<!-- ui debug properties -->
<New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.common-ui.velocityProperties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
</Put>
<Put name="spring.resource.loader.cache">false</Put>
<Put name="velocimacro.library.autoreload">true</Put>
</New>
</Arg>
</New>
<New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.wrapper-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
</Put>
<Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
</Put>
<Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
</Put>
<Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
</New>
</Arg>
</New>
<!-- transaction manager - bitronix -->
<Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
<Set name="serverId">jetty-fpp-server</Set>
<Set name="gracefulShutdownInterval">45</Set>
<Set name="logPart1Filename">btm/btm1.tlog</Set>
<Set name="logPart2Filename">btm/btm2.tlog</Set>
</Call>
<Set name="gracefulShutdown">60000</Set>
<Call name="addLifeCycle">
<Arg>
<New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
</Arg>
</Call>
<New class="org.mortbay.jetty.plus.naming.Transaction">
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/UserTransaction</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<!-- database data source -->
<New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
<Set name="uniqueName">fppDataSource</Set>
<Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
<Set name="minPoolSize">0</Set>
<Set name="maxPoolSize">50</Set>
<Get name="driverProperties">
<Put name="serverName">DYHVDB01</Put>
<Put name="instanceName">ALPHA</Put>
<Put name="integratedSecurity">false</Put>
<Put name="databaseName">tdb_digipen_fpp</Put>
<Put name="user">manage_digipen</Put>
<Put name="password">5T1fte?</Put>
<!--Needed to test??<Put name="pinGlobalTxToPhysicalConnection">true</Put>-->
</Get>
<Call name="init" />
</New>
<!-- Jms connection factories -->
<New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
<Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
<Set name="uniqueName">fppServerConnectionFactory</Set>
<Set name="minPoolSize">4</Set>
<Set name="maxPoolSize">40</Set>
<Set name="allowLocalTransactions">true</Set>
<Get name="driverProperties">
<Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Get>
<Call name="init" />
</New>
<!-- JMS Queues & topics -->
<New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/formNotifiationTopic</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQTopic">
<Arg>formNotifiationTopic</Arg>
</New>
</Arg>
</New>
<New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldNotifJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldNotifJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/inkJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>inkJmsQueue</Arg>
</New>
</Arg>
</New>
<!-- native library services -->
<New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptLicenseService</Arg>
<Arg>
<New
class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
<Arg>localhost</Arg>
</New>
</Arg>
</New>
<!-- *********************** -->
<!-- form server properties -->
<!-- *********************** -->
<New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.form.defaultEnvironmentName">default</Put>
<Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
<Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
<Put name="fpp.form.field.notif.nbconsumers">2</Put>
<Put name="fpp.form.ink.nbconsumers">2</Put>
<Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
<Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<!--<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>-->
<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
<Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
<Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
</Put>
<Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
<Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>
<!-- Cron Format A cron expression is a string comprised of 6 or 7 fields
separated by white space. Fields can contain any of the allowed values, along
with various combinations of the allowed special characters for that field.
The fields are as follows: Field Name Mandatory Allowed Values Allowed Special
Characters Seconds YES 0-59 , - * / Minutes YES 0-59 , - * / Hours YES 0-23
, - * / Day of month YES 1-31 , - * ? / L W Month YES 1-12 or JAN-DEC , -
* / Day of week YES 1-7 or SUN-SAT , - * ? / L # Year NO empty, 1970-2099
, - * / -->
<Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
<Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
<Put name="fpp.form.purge.instances.defaultcase">365</Put>
<Put name="fpp.form.purge.instances.case1">10</Put>
<Put name="fpp.form.purge.instances.case2">60</Put>
<Put name="fpp.form.purge.instances.case3">100</Put>
<Put name="fpp.form.purge.instances.case4">30</Put>
<Put name="fpp.form.purge.instances.case5">60</Put>
<Put name="fpp.form.export.cron">0 0 * * * ?</Put>
<Put name="fpp.form.export.exportpath">C:\FPP</Put>
<Put name="fpp.form.export.exportMode">REGULAR</Put>
<Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
<Put name="fpp.form.export.addInformations">true</Put>
</New>
</Arg>
</New>
<New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppFormDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource"></Ref>
</Arg>
</New>
<New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppJbpmDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource" />
</Arg>
</New>
<New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formJmsTopicConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- HWR SERVER -->
<New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.hwr-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
<Put name="fpp.hwr-server.fieldConsumers">4</Put>
<Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
<Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
<Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
<Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
<Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
<Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put
name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
</New>
</Arg>
</New>
<New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptHwrService</Arg>
<Arg>
<New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
<Set name="handwritingContextUserLimit">50</Set>
<Set name="resourceUserLimit">0</Set>
<Set name="otherObjectUserLimit">500</Set>
<Call name="doStart" />
</New>
</Arg>
</New>
<New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- wrapper -->
<New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<Set name="brokerURL">nio://localhost:61615</Set>
<Set name="redeliveryPolicy">
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Set>
</New>
<New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formNotificationConsumerFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<!-- JMX/SENSORS -->
<New id="inkJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="inkJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
</Arg>
</New>
<New id="fieldNotifJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
</Arg>
</New>
<New id="fieldJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
</Arg>
</New>
<New id="formNotifiationTopicUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="formNotifiationTopicObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
</Arg>
</New>
<New id="server.list" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="WRP">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8081</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="FORM">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8080</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="HWR">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8083</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
</New>
<New id="fpp.form.jmx.properties" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="inkJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="inkJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="inkJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="inkJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="inkJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
<!--FieldNotifJmsQueue -->
<Put name="fieldNotifJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="fieldNotifJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="fieldNotifJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
</New>
<New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.ui.parameters</Arg>
<Arg>
<New
class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
<Set name="jmxProperties">
<Ref id="fpp.form.jmx.properties"></Ref>
</Set>
<Set name="serverList">
<Ref id="server.list"></Ref>
</Set>
</New>
</Arg>
</New>
</Configure>
Thanks so much in advance.
-
Folks,
I am planning to implement transactional replication with updatable subscription between two sql2005 Instance .I am surprised that i cold see this type of replication in the new publication wizard in the source server instead i see peer-to-peer replication.
Could you please help me in understanding how to setup transactional replication with updatable subscription in sqlserver 2005 standard edition.
Thanks.Hi soories,
In addition to Ashwin’s post, peer-to-peer replication is available only in SQL Server 2005 Enterprise Edition. Please
execute ‘Select @@version’ in SQL Server to verify the version and edition of your SQL Server instance.
Also if you cannot see the option “Transaction replication with updatable subscription” in New Publication Wizard, you can use T-SQL to achieve this requirement.
How to: Create an Updatable Subscription to a Transactional Publication (Replication Transact-SQL Programming)
https://technet.microsoft.com/en-us/library/ms146922(v=sql.90).aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support
Maybe you are looking for
-
Adobe Bridge CS6 Standard Browser wird nicht verwendet
Hallo zusammen Ich habe ein Problem mit Adobe Bridge. Ich möchte eine Webgalerie erstellen und wollte die mal im Browser anschauen. Wenn ich aber "Vorschau in Browser" anklicke, wird der Flash Builder geöffnet, und ich kann die Galerie nicht ansehen.
-
Blue Screen of Death on Toshiba Satellite
Hi, I have a Toshiba Satellite and for the last few months I have experienced two Blue Screens Of Death, at first, I didn't think much of it, but it kept getting more and more frequent. The STOP Codes are 0x1E and 0xA. Now, I cannot even boot my lapt
-
Hi I subscribed to HBO but it promts me to install Widevine wich I can't. I just get the message that it is not secure etc. Been checking the threads here and elsewhere with mixed result: it seems not to be a good thing to install on a mac? Or? And i
-
NPE error when navigating to next page based on lov selection
hi there am having problem whn navigating to next page based on lov selection,when i select value and click the button to navigate am geting NPE ERROR {code} <DCUtil> <findSpelObject> [598] DCUtil, returning:oracle.jbo.uicli.binding.JUFormBinding, fo
-
Is there a fix for dialling contacts in the 44 (0) format yet?
Hi All, Contacts formatted as +44 (0) are dialled as +440... at the moment. I was wondering if there was a fix built for this yet? As every other smart phone seems to deal with it fine. Before anyone says it, no I'm not going back to my companies glo