XAML not rendering images in Silverlight Project

So I working on creating a Windows Phone port of our current iOS and Android apps and when I started a new project I find that when using a Windows Phone Silverlight project none of the images that I add to the project show up in the XAML designer, but
they do show up when I run the app on a device or simulator. Now if I create plain Windows Phone project the images show up in the XAML designer and simulator without any issues. Is there something wrong/different with the Silverlight project that doesn't
render images in the designer and if so how can that be changed? I need to use the Silverlight version since the web services that are used are older WSDL and the Silverlight projects are the only ones that have the "Add Service Reference" option.
Thanks.

Hi Sal,
Since this issue is related to the Windows Phone Silverlight, so we will move this case to the Developing for Windows Phone forum:
https://social.msdn.microsoft.com/Forums/windowsapps/en-us/home?forum=wpdevelop , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Safari iOS 7 bug: not rendering images

Safari has a bug, it does not render image from The Economist at all:
http://www.economist.com/node/21586620?fsrc=scn/gp/wl/dc/politicsandpurse
Same goes for Safari modules that are used by other apps, e.g. Google+.
Chrome with data compression renders OK, but it does so because data compression goes through Google server, and only decoding is done on machine.
This all took place on iPad Mini.
Shame on Apple Inc.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

Not rendering before making iDVD project

OK, by reading the post, it appears that the culprit for bad photo quality when making a photo slideshow in iMovie then going to iDVD is the iMovie render process.
So, when I hit the iDVD button is it OK to not render and make go right to iDVD?

Hello NH Sullivan,
You've opened up a can of worms here! The images, when import into iMovie, are rendered as movie files, thus greatly reducing the quality of images. It is not iDVD that distorts the images. The best solution is to create a slideshow in iPhoto, export it to Quicktime and then import the slideshow into iMovie for titles and music. - Perfect every time!
iPhoto won't let you create a one photo slideshow. If you only want one image add the same photo twice to an iPhoto slideshow. You will have drag the image out of iPhoto and change the name. Then drop it back into iPhoto. Turn the Ken Burns effect turn Off and no transition you'll have a 6-20 second still (static) movie of your image that you can export to Quicktime and add to you iMovie project for editing without any compramise in image quality. You can make the two image slideshow as long as you want and cut the length down iMovie. You'll need about 6 seconds minimum to add transitions in and out.
Have fun!

DataGrid not rendering images during scrolling

I've created a "Reusable Inline Item Renderer" to display an
image in a DataGrid's column, as is shown here:
http://www.adobe.com/devnet/flex/quickstart/using_item_renderers/#reusable_item
With one difference: In the example the source of the Image
component in the item rendered is being set to the URL of an image
file. In mine I am setting the source as a Bitmap object, the
Bitmap being a public and Bindable property of an Object in an
Array. This Array of Objects is the DataGrid's dataProvider.
And it works fine, except that when I scroll the DataGrid,
any images that have been scroll off screen and then back on again
are blank where the image used to be. I've tried tracing out the
source of each Image when it renders and it still has a Bitmap
object as it's source even though it is no longer displaying
it.

I have been beating my head against the wall on this problem too for awhile now. There is precious little mentioned anywhere about it.
I tried to recreate your code, as follows, to solve my problem but now am getting compilation errors.
Can you please share your code segment on how you did it?    (It would also be helpful to see how you call it too.) I am loading images from the web with Loader.
This does not compile:
        public function get data():BitmapData {
            return _data;
        public function set data(value:BitmapData):void {
            _data = value;
             var newBitmap:Bitmap = new Bitmap(value);
            source = newBitmap;
In my main class, the data provider is already populated, so I am replacing the cell with the bitmap.
Thanks for any help you can give.

Bridge CS4 not rendering images correctly

i have macbook 10.4.11 with 60 GB free, and 2GB of RAM and when i hit the space bar in bridge to view my photos at full screen the photos do not sharpen. they used to but now they don't, they just remain blurry. i have tried "purge cache" and checking "generate monitor size preiews" and nothing. Anyone have any other advice?
Thanks

i have tried "purge cache" and checking "generate monitor size preiews" and
nothing. Anyone have any other advice?
Usually that should do the trick, although it should be the other way round,
after having set monitor size previews you use the purge cache for folder
option to make it effective, did you used it in that order?
Also if the problems keep occurring try a preference reset with restarting
Bridge with option key and choose refresh preferences. Set prefs again to
your wishes and try again.

HT6065 I updated to 10.9.1 and now my display is not rendering images properly. Anyone else having this problem?

The only option for this display problem seems to be to recover from backup. Is anyone else having problems with update 10.9.1?

Welcome,
I've upgraded 3 systems (MBP 2012, MBP 2013 Retina & late 2009 iMac) and haven't had this issue.
What's your box?
Regards,
Shawn

Mail signature not rendering image in table

I am trying to render the signature which is as follow:
<table><tr><td><img src="logo.jpg"></td><td>My Name</td></tr></table>
but it keeps strip the logo out from the table and becomes:
<img src="logo.jpg">
<table><tr><td> </td><td>My Name</td></tr></table>
Does anyone know why??? This is driving me crazy.~~~

Delete the <p> tags around the spacer.gif and at least
in FF it is fixed.

Desktop can not see all images in aperture project

When trying to change the background picture desktop lists my aperture projects but only displays a subset (5 of 114) of the images in one project. Also have 2 of 8, 152 of 152, and 0 of 12 in different projects.

It's possible you don't have Previews for the "missing" images (Aperture shares the Preview, not the full image).
What happens if you update every image in the Project's Preview?
To update all the JPEG previews in a project
In the Library inspector, Control-click the project whose JPEG previews you want to update, then choose Update Previews from the shortcut menu.

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

In Imovie 2011-Trying to image capture my project but it comes up after 10 hours- The project could not be prepared for publishing because an error occurred. File already open with write permission. Hopefully someone can help me.

In Imovie 2011- Trying to image capture my project but it come up after 10 hours of rendering- The project could no be prepared for publishing because an error occured. File already open with write permission. Please Help!

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

[SOLVED] KDE4.3 is not rendering correctly the images in the desktop

I've posted a bug in KDE because the KDE images are not rendered correctly:
https://bugs.kde.org/show_bug.cgi?id=202829
You can see an image of my desktop at:
https://bugs.kde.org/attachment.cgi?id=35921
As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
http://wiki.archlinux.org/index.php/ATI
I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
Someone with an ATI card has the same problem? Which driver would you suggest to me?
Thank you
Last edited by jjjaime (2009-08-06 19:04:12)

Thank flamelab for your help.
The xf86-video-ati-git:
http://aur.archlinux.org/packages.php?ID=15374
fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
Best regards,
Jaime

Photoshop Elements 9 Editor not showing images in Project Bin

Yesterday I went though my PE9 Organiser and rearrange some of my files and made sure that it was more user friendly.
Today I went in to try and do some edits and not all of the folders are showing up in PE9 Project Bin. I can view some images, but not all images. I know that I can view some images that I move yesterday, but there are some that weren't moved that I can't see and some that I didn't move that i can't see.
When i go to my Organiser I can see that the images are tagged and in the folders - why can't PE9 Editor show them to me?

Hi,
Can you please tell where are folders visible in Project Bin?
I can't see folders in my PE9 project bin.
Thanks
andaleeb

Images are not rendered on the PIE03 Client

Hi Team,
I have a specific scenario where the Web Dynpro JAVA applications are deployed on Symbol Handheld devices (9090). The applications run fine on majority of the devices, but we have two handhelds where the PIE version 03 client is installed (we are passing the sap-wd-client=Pie03Client parameter). On these devices, the standard images pertaining to the table control UI like the paginator etc are not rendered. We are getting an "X" on the placeholder instead. Has someone faced this problem?
Can you please provide some pointers? I have no clue as to what is missing here. Any help would be appreciated please.
Thank you

Hi Oliver,
This is the online Mobile solution called "Mobile Webdynpro Online", it supports three clients.
1. Pie03Client - for Windows Mobile devices.
2. NokiaS80Client - for Nokia devices
3. WMLClient - for Blackberry devices
@Sanjay: can you check on your network speed?
Best Regards,
Karthik

Help! Images are not rendering in any browser!

When online, images are not rendering on any webpage. All other content is fine. Problem is across browsers, BUT, is limited to my user identity. When I create a new user and go online the problem id resolved. I do not want to lose all my user settings. Can anyone think of something I can do to troubleshoot this. Some file I may have deleted, some setting?

Hi all, I am facing the same problems:
Im using an UMTS card to connect to the internet.
On various pages, no pictures are shown. The reason is, that my mobile carrier is using proxies to compress the pictures. Same thing worked fine, before updating to snow leopard. Now the pictures can show up. Safari says, that the pictures were not found.
I tried the umts card on another computer, it worked fine, so t has to do with the update from Leo to Snow Leo....
I already deleted the .plist, but it didnt solve the issue.
Does anybody has an hint or solution??

XAML not rendering images in Silverlight Project

Similar Messages

Maybe you are looking for