Xcelsius 2008 FP3.5 Broadcasting

Hi All,
Is there anyway we can broadcast a dashboard via email?
Cheers
Craig

Hi Phil,
Can be...
To resolve this error, copy all files from the disc to a local computer location (for example, the desktop). Install Crystal Xcelsius from the setup.exe file at that location.
Hope this helps.
Kind Regards,
Marcio

Similar Messages

  • 'Error applying transforms' when trying to install Xcelsius 2008 fp3.2

    Hello
    I've just tried to install Xcelsius 2008 fp3.2 (I am currently on Xcelsius 2008 sp3). I did read the installation notes, and I wonder if the problem I had is related to the fact that I am not logged in as administrator (I'm on XP).
    The package extracted and as the installer ran I got the message:
    'Error applying transforms. Verify that the specified transform oaths are valid'.
    Thanks
    Phil

    Hi Phil,
    Can be...
    To resolve this error, copy all files from the disc to a local computer location (for example, the desktop). Install Crystal Xcelsius from the setup.exe file at that location.
    Hope this helps.
    Kind Regards,
    Marcio

  • Xcelsius 2008 Fix Pack 3.5 (FP3.5) is now available

    Xcelsius 2008 Fix Pack 3.5 (FP3.5) supports Windows 7, see notes section below
    (Fix Pack 3.3 was the first version for Windows 7)
    It is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0) or FP3.1, FP3.2, FP3.3 or FP3.4: See: Xcelsius 2008 SP3 is now available
    u2022 The Xcelsius Present 2008 Fix Pack 3.5 patch is for Xcelsius 2008 SP3 Present only.
    u2022 The Xcelsius Enterprise 2008 Fix Pack 3.5 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    When you run the self extracting file it asks you where to extract the files to and then extracts all of the necessary files. There can be a few minutes delay between extracting the files and the installer window displaying so please be patient.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.5.0
    The documentation can be found on the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.5
    u2022 Xcelsius 2008 Fix Pack 3.5 Release Notes
    There is a post on this forum for the supported platforms, see: Xcelsius 2008 Supported Platforms
    Regards
    The Xcelsius Team
    Notes for installing and using Xcelsius 2008 on Windows 7 or Windows Vista
    Support for Windows 7
    Xcelsius 2008 Fix Pack 3.5 (FP3.5) supports Windows 7 (Fix Pack 3.3 was the first version for Windows 7).
    Installation on Windows 7 or Vista
    When you install an Xcelsius 2008 Service Pack or an Xcelsius 2008 Fix Pack run the installer as an administrator:
    To do that right-click on setup.exe and select Run as administrator.
    You will be asked if you want the setup program to make changes to your computer, select Yes.
    When the installer finishes if you get the following warning This program may not have installed correctly then select Reinstall using recommended settings and the installer will run again.
    Turn off User Account Control on Windows Vista
    On Windows Vista only you must turn off User Account Control.
    If you do not then the Add-On Manager and Export to AIR menu items will be disabled:
    Go to START > Control Panel > User Accounts > Turn User Account Control on or off
    How to run Xcelsius 2008 as an administrator (see below for when to run as an administrator):
    Every time (recommended):
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Properties. In the Compatibility tab under Privilege Level select Run this program as an administrator
    One time only:
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Run as administrator.
    When to run Xcelsius 2008 as an administrator:
    Before you try to set or change the Xcelsius 2008 license key.
    If you do not the license key will not be updated or you may get a message saying that the license key is invalid.
    When you want to use the Add-on Manager to view add or remove add-ons (File > Manage Add-Ons).
    If you do not the Add-on Manager may crash or freeze.
    When you want to export to Adobe AIR
    If you do not then Export to AIR may crash or freeze.
    Please also see the SAP Crystal Solutions Support Portal: http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • Xcelsius 2008 Fix Pack 3.4 (FP3.4) is now available

    Xcelsius 2008 Fix Pack 3.4 (FP3.4) supports Windows 7, see notes section below
    (Fix Pack 3.3 was the first version for Windows 7)
    It is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0) or FP3.1, FP3.2 or FP3.3: See: Xcelsius 2008 SP3 is now available
    u2022 The Xcelsius Present 2008 Fix Pack 3.4 patch is for Xcelsius 2008 SP3 Present only.
    u2022 The Xcelsius Enterprise 2008 Fix Pack 3.4 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    When you run the self extracting file it asks you where to extract the files to and then extracts all of the necessary files. There can be a few minutes delay between extracting the files and the installer window displaying so please be patient.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.4.0
    The documentation can be found on the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.4
    u2022 Xcelsius 2008 Fix Pack 3.4 Release Notes
    There is a post on this forum for the supported platforms, see: Xcelsius 2008 Supported Platforms
    Regards
    The Xcelsius Team
    Notes for installing and using Xcelsius 2008 on Windows 7 or Windows Vista
    Support for Windows 7
    Xcelsius 2008 Fix Pack 3.4 (FP3.4) supports Windows 7 (Fix Pack 3.3 was the first version for Windows 7).
    Installation on Windows 7 or Vista
    When you install an Xcelsius 2008 Service Pack or an Xcelsius 2008 Fix Pack run the installer as an administrator:
    To do that right-click on setup.exe and select Run as administrator.
    You will be asked if you want the setup program to make changes to your computer, select Yes.
    When the installer finishes if you get the following warning This program may not have installed correctly then select Reinstall using recommended settings and the installer will run again.
    Turn off User Account Control on Windows Vista
    On Windows Vista only you must turn off User Account Control.
    If you do not then the Add-On Manager and Export to AIR menu items will be disabled:
    Go to START > Control Panel > User Accounts > Turn User Account Control on or off
    How to run Xcelsius 2008 as an administrator (see below for when to run as an administrator):
    Every time (recommended):
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Properties. In the Compatibility tab under Privilege Level select Run this program as an administrator
    One time only:
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Run as administrator.
    When to run Xcelsius 2008 as an administrator:
    Before you try to set or change the Xcelsius 2008 license key.
    If you do not the license key will not be updated or you may get a message saying that the license key is invalid.
    When you want to use the Add-on Manager to view add or remove add-ons (File > Manage Add-Ons).
    If you do not the Add-on Manager may crash or freeze.
    When you want to export to Adobe AIR
    If you do not then Export to AIR may crash or freeze.
    Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • Xcelsius 2008 Fix Pack 3.3 (FP3.3) is now available + supports Windows 7

    Xcelsius 2008 Fix Pack 3.3 (FP3.3) is the first version of Xcelsius 2008 that supports Windows 7 (see notes section below)
    It is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0) or FP3.1 or FP3.2: Xcelsius 2008 SP3 is now available
    u2022 The Xcelsius Present 2008 Fix Pack 3.3 patch is for Xcelsius 2008 SP3 Present only.
    u2022 The Xcelsius Enterprise 2008 Fix Pack 3.3 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    When you run the self extracting file it asks you where to extract the files to and then extracts all of the necessary files. There can be a few minutes delay between extracting the files and the installer window displaying so please be patient.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.3.0
    The documentation can be found on the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.3
    u2022 Xcelsius 2008 Fix Pack 3.3 Release Notes
    Regards
    The Xcelsius Team
    Notes for installing and using Xcelsius 2008 on Windows 7 or Windows Vista
    Support for Windows 7
    Xcelsius 2008 Fix Pack 3.3 (FP3.3) is the first version of Xcelsius 2008 that supports Windows 7.
    Make sure you apply Fix Pack 3.3 if you are using Windows 7.
    Installation on Windows 7 or Vista
    When you install an Xcelsius 2008 Service Pack or an Xcelsius 2008 Fix Pack run the installer as an administrator:
    To do that right-click on setup.exe and select Run as administrator.
    You will be asked if you want the setup program to make changes to your computer, select Yes.
    When the Fix Pack 3.3 installer finishes if you get the following warning This program may not have installed correctly then select Reinstall using recommended settings and the installer will run again.
    Turn off User Account Control on Windows Vista
    On Windows Vista only you must turn off User Account Control.
    If you do not then the Add-On Manager and Export to AIR menu items will be disabled:
    Go to START > Control Panel > User Accounts > Turn User Account Control on or off
    How to run Xcelsius 2008 as an administrator (see below for when to run as an administrator):
    Every time (recommended):
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Properties. In the Compatibility tab under Privilege Level select Run this program as an administrator
    One time only:
    Go to START > All Programs > Xcelsius and right-click on Xcelsius 2008 and select Run as administrator.
    When to run Xcelsius 2008 as an administrator:
    Before you try to set or change the Xcelsius 2008 license key.
    If you do not the license key will not be updated or you may get a message saying that the license key is invalid.
    When you want to use the Add-on Manager to view add or remove add-ons (File > Manage Add-Ons).
    If you do not the Add-on Manager may crash or freeze.
    When you want to export to Adobe AIR
    If you do not then Export to AIR may crash or freeze.
    Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • Xcelsius 2008 Fix Pack 3.1 (FP3.1) is now available

    Xcelsius 2008 Fix Pack 3.1 (FP3.1) is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0): Xcelsius 2008 SP3 is now available
    The Xcelsius Present 2008 Fix Pack 3.1 patch is for Xcelsius 2008 SP3 Present only.
    The Xcelsius Enterprise 2008 Fix Pack 3.1 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    Please be patient when you run the self extracting file as it silently extracts all of the necessary files and then automatically runs the installer which can take a few minutes.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.1.0
    The documentation is available from the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.1
    u2022 Xcelsius 2008 Fix Pack 3.1 Release Notes
    Regards
    The Xcelsius Team
    Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • Xcelsius 2008 Fix Pack 3.2 (FP3.2) is now available

    Xcelsius 2008 Fix Pack 3.2 (FP3.2) is now available from Service Marketplace and the support download site: SAP Crystal Solutions Downloads
    This Fix Pack must be applied to Xcelsius 2008 SP3 (version: 5.3.0.0) or FP3.1: Xcelsius 2008 SP3 is now available
    The Xcelsius Present 2008 Fix Pack 3.2 patch is for Xcelsius 2008 SP3 Present only.
    The Xcelsius Enterprise 2008 Fix Pack 3.2 patch is both for Xcelsius 2008 SP3 Engage and Enterprise.
    Make sure you download the self extracting file and run it from your hard drive.
    When you run the self extracting file it asks you where to extract the files to and then extracts all of the necessary files. There can be a few minutes delay between extracting the files and the installer windows displaying so please be patient.
    After you have applied the Fix Pack the version number in the about box will be version: 5.3.2.0
    The documentation is available from the SAP help portal. You can search for the Xcelsius guides here: http://help.sap.com/businessobject/product_guides/ including:
    u2022 What's Fixed in Xcelsius 2008 Fix Pack 3.2
    u2022 Xcelsius 2008 Fix Pack 3.2 Release Notes
    Regards
    The Xcelsius Team
    Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
    Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement
    Edited by: Matt Lloyd on Aug 11, 2010 10:36 PM -  Xcelsius Present 2008 Fix Pack 3.2 has been released

    Hi,
    when will IE8 be supprted with Xcelsuis 2008? I am having the problem that no new Connections (e.g. QaaWS) can be created... Thanks for a quick answer.
    Best regards,
    Simon.

  • SAP Authentication issue in Xcelsius 2008 SP4

    Ingo Can you help me?
    Xcelsius 2008 SP4 Failed to Open/Save from BusinessObjects Enterprise and throws an error Failed While Trying to Logon User "0000" RFC error: "LOGON_DATA_INCOMPLETE" when using SAP Authentication.
    It works perfect with Enterprise.
    Recently we have upgraded from Xcelsius 2008 SP3 FP 3.5 to Xcelsius 2008 SP4. It also displays the password without encrypting.
    BOE 3.1 Sp3
    Integration Kit SP3Fix Pack 3.2
    SAP GUI 720
    Xcelsius 2008 SP4
    It was working good with SAP Authentication when using Xcelsius 2008 SP3 FP3.5
    Thanks
    Dais

    Hi,
    As a starting point, i would strongly recommend you standardise all your component versions.
    from what i can see, you've just asserted that Server, Integration Kit, and Client  are all on different Fix levels..
    that's not a nice baseline on which to investigate!  
    Also, patching would also include importing the correct SAP Transports into your BW. (they change almost every FP)
    Regards,
    H
    Edited by: Henry Banks on Feb 10, 2012 4:00 PM

  • Error while installing Xcelsius 2008

    Hi,
    We are getting error while installing Xcelsius 2008  version 5.3.....
    "The upgrade patch cannot be installed by windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch"
    Kindly suggest how to install the Xcelsius latest verion.
    With Regards,
    Pearl

    Hi Pearl,
    Sorry if you've already done this, but have you installed Xcelsius 2008 SP3 first?  It sounds like you are trying to install a fix pack without first installing Xcelsius 2008.
    The downloads are all available from the [downloads service market place|http://www.sdn.sap.com/irj/boc/] (as per the stickied thread)
    If you choose Service Pack as the software type it will allow for download of the SP3 full install.
    OR
    Could it be this issue [Xcelsius FP3.5 error installing Excel2010; with solution from F. Kooij if you are referring to the latest fix pack 3.5 with Office 2010?
    Regards,
    Paul
    Edited by: zygorf on May 24, 2011 12:53 PM

  • Xcelsius 2008 FP2 won't export to swf

    Hello,
    I can not get Xcelsius to preview or export to swf.  The progress bar labelled "Generating swft" displays for approximately 3-5 minutes until Xcelsius.exe finally crashes and the app closes.  I'm running Xcelsius 2008 SP1 with FP2, Live Office XI R2 and Flash 10 (lastest version).  I've also looked at the Flash security as described in other forum posts and that does not appear to be the issue.
    The .xlf I'm working with was successfully completed and published to Crystalreports.com and is working fine.  The problems began when two additional Live Office connections were added to allow for some additional data points in the next release of the dashboard.  The data model now contains a few hundred more rows and a few hundred forumlas causing the Excel file to increase to just under 1MB.  The total number of rows of data return in all Live Office connections combine are just over 1,000 rows.  The max # rows setting in Xcelsius is set to 2,000.  The formula cells added to the data model are fairly simple formulas that were successfully used in the data model previously (ISERROR, INDEX, MATCH).
    On occasion, Xcelsius will give the message box "Your range has been reduced to the maximum rows allowed" before crashing. 
    Acting on this message I have removed the new Live Office connections, but the message/crashing continues.  I have now scaled back the # of Live Office connections and # of formula cells way back to a very small number.  the data model is now very small and quickly imports into Xcelsius yet the same message/crashing continues.  I have verified that the data model currently in Xcelsius is the most recent, very small version of the data model, but Xcelsius still behaves like the large 1MB data model is present. 
    I don't know if this is even a # rows/data model size issue or a config/bug issue.  Any suggestions would be most appreciated. 
    I've read the PDF on FP3, but don't see this scenario listed.  Might FP3 help?  I need to be FP3 is compatible with publishing swf files to Crystalreports.com which is a BOE XI R2 platform.

    thanks for the quick advice.  so we can scale back the data to within 512 rows by splitting this into 2 dashboards.  Not ideal, but shouldl be acceptable. 
    The data is already pre-aggregated.  The data sources for this data model are crystal reports that are published in Crystalreports.com and refreshed nightly against a 3rd party API.  Virtually all of the formulas required in Excel are used to line up rows of data that are being pulled in from 2 seperate live office queries.  All of the required data points could not be included in a single crystal report so 2 are needed and the rows matched up in Excel using an INDEX(MATCH) formula.  We are not using any unsupported functions or VLOOKUP per the advice of an Xcelsius best practice document I located in this forum.  I'm open to any suggestions on better techniques to align related rows of data from two seperate ranges in Excel so they essentially appear as though they came from a single data source.
    I am starting to lean toward the # of formulas in the data model as being the issue and have added fitlers to the live office query to cut the # of rows to only 20% of what was originally being retrieved.  The # of formulas were also reduced by the same percentage.  However, when trying to preview or export to swf, Xcelsius still gives the same message that the range was reduced to the max allowed and then crashes.  It's as if Xcelsius is still seeing the old data model.  Perhaps something is being cached that isn't clearing out?  Even a full remove and re-install of Xcelsius SP1, Live Office and FP2 has had no affect.  Maybe we need to build a new .xlf from scratch?
    thanks

  • Xcelsius 2008 Fix Pack 3.4 (FP 3.4) installation error

    Hi,
    I have Xcelsius 2008 Enterprise FP 3 running on XP 32-bit with Office 2010 just fine.
    However when I try to install FP3.4 I'm getting the error: "Xcelsius 2008 requires adobe flash player 9,151 or later". I've confirmed I've flash 10,2,153,1 installed.
    Any ideas?
    Thks,
    William

    Hi,
    If you search this forum , you can find some threads dedicated to this issue related with compatibility with office 2010.
    As of now Xcelsius 2008 (5.3.5.0 which is the latest one) does not support Office 2010. you can find a way out to install Xcelsius, but later you have to face issues functionality as well as performance wise and also when ever you try to install latest Fix Pack it will throw error because installer perform a check before installation.  SP 4 is going to  support office 2010 and also Crystal Dashboard Design 2011. As said above Ghost path is one of the many workaround.
    So I would suggest you uninstall the 2010 Office and install office 2007.
    Good Luck & Keep Posting.

  • Can't uninstall XCelsius 2008 SP1, in order to install SP3.

    Hello,
    I'm attempting to uninstall XCelsius 2008 SP1 (FP3), in order to install SP3, as per the instructions.  However I am running into the same error message that is found in this thread: [SP3 Wont install because I can't get current version off|SP3 Wont install because I can't get current version off].
    I am receiving the same error code u201Ccanu2019t find Xcelsius.msiu201D and then u201CError 1706.u201D
    I attempted to follow the instructions to edit the registry, but could not find the string "MediaPackage" anywhere, so I don't know what my next step should be.  Can anyone help me out with this?  Thanks!!
    - George

    Hi,
    I had a similar problem and had no luck resolving it until I tried the MS installer fix utility.
    http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
    That worked for me.
    Bill

  • Xcelsius 2008 5.4.0.0 - XLF file - All components missing/blank canvas

    xcelsius 2008 5.4.0.0  build 12,4,0,1166 --
    working on a xlf file - save it -- go to reopen it and get a blank canvas -- look in object browser and ALL objects are missing - none showing
    did the resedit thing removing the en file --
    rebooted windows and xcelsius several times
    tried to go into preview mode -- nothing there
    tried doing an export to html and viewing html -- nothing there
    other observations --indicating it may not be the "typical flash" issue
    #1 - other XLF files open and objects are there and act and behave normally
    #2 - other html files etc all operate fine
    somehow something is corrupted - had a wierd thing when i started up - it showed the split screen components were there etc -- but then the program seemed to crash - and then the sap window came up and it started up again - there might have been a warning that it was busy or retry or something --   that is the only thing i noticed
    using newer components -- bubble chart  - but nothing really out of the ordinary
    please help - would hate to rebuild -- DO have the underlying data in xlf and exported it to xls  so im safe there
    thanks

    With SP1 and FP3 this issue is resolved. Closing thread.

  • Error to install Xcelsius 2008 on Windows vista. Error 1935.

    I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
    Error 1935 Error al instalar el ensamblado.
    "Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

    From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

  • Not able to see Data in Xcelsius 2008

    Hi everyone,
    My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
    System Info
    Xcelsius 2008 Enterprise Trial Version SP 3.0
    SAP BW 7.1 SP 6 ABAP and JAVA
    Any help would be appreciated

    Hi Rashid,
    When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
    To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
    Regards
    Matt

Maybe you are looking for