XCM configuration does not start up

hi,
I deployed a standard b2b shop and configured the shop. The shop works fine. In the next step I created a develpment track in NWDI and deployed the created shop to the same J2EE Engine.
When I try to call up the XCM configuration an error page comes up. In the logfiles I can see the following error message:
Error com.sap.isa.core.init.InitializationHandler Initialization fo com.sap.isa.core.xcm.init.ExtendedConfigInitHandler falied. [Exception] java.lang.NoClassDefFoundError: com/sap/engine/lib/jaxp/DocumentBuilderFactoryImpl
Any Idea? Could this be related to Note 881597?
Regards
Michael

Hello Michael,
Do a stacktrace and find which component is trying to set the JAXP system property.
Which JDK you are using?
Check these notes too [701838 |https://service.sap.com/sap/support/notes/701838]and [609804|https://service.sap.com/sap/support/notes/609804].
Easwar Ram
http://www.parxlns.com

Similar Messages

Windows Zero Configuration does not start automatically

It won't start automatically, even though I have set it to automatic in the Services Tab. Every time the computer goes to sleep, logs out or restarts, I have to go back into Services and restart it. How can I get it to start automatically. NOTE: I HAVE CHANGED THE STARTUP TYPE IN THE SERVICES TAB BUT IT IS TO NO AVAIL (I have asked this question in other places, and they still give me this answer, so I hope you guys are smart enough to not tell me what I already said I did.)

On the recovery tab of the service properties, set them all to restart. Does that work for you? If you can not start a service, there might be some kind of malware or virus that is forcing the service to start. Could also be a corrupted file on the hard drive. If you look at your event logs, does it show what any error messages?

WebAnalysis does not start after workspace is set on Windows Authentication

I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.

Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

My jcontrol does not start

Hi,
When i logged into Visutal Administrator, It asked me to change the password. I had Changed the administrator password there and the same updated in the secure store as follows:
1. Start the Config Tool by executing the /usr/sap/<SID>/<Instance name>/j2ee/configtool/configtool script file.
2. Select secure store.
3. Select the admin/password/<SID> entry.
4. Enter the J2EE Engine administrator user new password in the Value field and choose Add.
5. Choose File -> Apply to save the data.
6. Restart the J2EE Engine
but after this, my server is not starting and jcontrol does not start.
find the log file of jcontrol:
[Thr 3124] Mon Oct 12 15:29:44 2009
[Thr 3124] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c   1642]
[Thr 3124] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 3124] JControlCloseProgram: started (exitcode = 66)
[Thr 3124] JControlCloseProgram: good bye... (exitcode = 66)
If i opens my config tool and it shows only secure store, gives an error message as
Error occured while working with the configurations(scanning)
MSg: Error while connecting to DB
My login to SAP<SID>DB is getting failed.... (am using SQLSERVER DB)
could anyone help me in solving this issue
Regards
Sunil Chiluveru

hi
Please also see this log file jvm_bootstrap
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0124325].
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:364)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:129)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: [SAP_NWmss][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPNSPDB'.
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSLoginRequest.processReplyToken(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSLoginRequest.submitRequest(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.connect(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.open(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:306)
     ... 14 more
[Bootstrap module]> Problem occurred while performing synchronization.

JControl.exe does not start...Database Initialisation Problem...MS SQL

Hi,
I was wondering if anyone has any idea on why JCONTROL.exe does not start. I am currently installing NW04s EP7. The DB is on another host and te SCS and CI are on a different host. I am going throught the installation when I get the following error fro the Bootstrap file.
I have already done the following steps:
1. entered the SAP<SID>DB password
2. SQL is started and running on the second host.
3. The bootstrap.propeties files look the same as any other file EP system on our network
[Mar 7, 2007 5:32:35 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
[Mar 7, 2007 5:35:45 PM ] -
[Mar 7, 2007 5:35:45 PM ] Bootstrap MODE:
[Mar 7, 2007 5:35:45 PM ] <INSTANCE GLOBALS>
[Mar 7, 2007 5:35:45 PM ] determined by parameter [ID0117060].
[Mar 7, 2007 5:35:45 PM ] -
[Mar 7, 2007 5:35:46 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
PC04315\sapmnt\ET1\SYS\global\security\lib\tools
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:212)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Mar 7, 2007 5:35:46 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
Many thanks,
Adil Zafar

==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
PC04315\sapmnt\ET1\SYS\global\security\lib\tools
Do you have strong encryption on your current system?

Enterprise Manager Console does not start on Win 2000 Pro

I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
I have installed many times, but it is never successfull.
I was installing Enterprise Edition -> General Purpose database.
Tried the following from command prompt:
oemapp.bat I get this message : "Usage: oemapp <application_name>"
oemapp consoleI get : "bad command or file name"
oemapp console oem.loginmode=standaloneI get : "bad command or file name"
Is there any post installation configurations that need to be done?
When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
Could some one help me with this.
Thanks,
Aruna

Marcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim

Tomcat5 still does not start automatically

Hello,
Novell-tomcat5 still does not start automatically at boot although it is set to do so.
This is from beginning of the oes2/SBE2.5 installation (without simba).
It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches.
After booting at terminal console:
/etc/init.d/novell-tomcat5 status shows unused
/etc/init.d/novell-tomcat5 start starts tomcat5 without errors
In my boot.msg I found the following error:
____START______
<notice>'novell-nss start' exits with status 0
<notice>novell-tomcat5 start
Starting Tomcat (/var/opt/novell/tomcat5/)<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /sbin/klogd 4842
<notice>checkproc: /sbin/syslog-ng 4839
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /sbin/portmap 6200
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/sshd 6915
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/nmbd 5530
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/smbd 6900
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/namcd 8495
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/ntpd 7000
<notice>checkproc: /usr/sbin/slpd 7030
<notice>checkproc: /usr/sbin/slpd 7030
failed
<notice>'novell-tomcat5 start' exits with status 7
<notice>novell-xregd start
Starting novell-xregd...done
<notice>'novell-xregd start' exits with status 0 ....
_______END______________
Of course it es even a cosmetic problem I don't want to start tomcat manually everytime when booting up.
Has anybody an idea what could be wrong?
Yours sincerely
OliverN

Originally Posted by revilo
Hello,
Novell-tomcat5 still does not start automatically at boot although it is set to do so.
This is from beginning of the oes2/SBE2.5 installation (without simba).
It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches.
After booting at terminal console:
/etc/init.d/novell-tomcat5 status shows unused
/etc/init.d/novell-tomcat5 start starts tomcat5 without errors
Of course it es even a cosmetic problem I don't want to start tomcat manually everytime when booting up.
Has anybody an idea what could be wrong?
Yours sincerely
OliverN
Hi Oliver,
If you are manually installing the component products then this is no longer a "NOWS SBE" installation. Any issues you encounter are related solely to the component products. OES Linux Installation questions should be directed to: OES-L: Install
In the mean time, to see if it is configured to start automatically use "chkconfig". For instructions:
Code:
man chkconfig
Is it configured to start automatically?
Code:
server:~ # chkconfig --list | grep novell-tomcat5
novell-tomcat5 0:off 1:off 2:off 3:on 4:off 5:on 6:off
The response from the above command shows that novell-tomcat5 should start automatically for runlevels 3 and 5.
If it is not set to start automatically on your server, you can make it start by:
Code:
chkconfig novell-tomcat5 on
I am by no means a Linux expert. If this doesn't resolve your issue, I suggest you post in the appropriate forum where you will find knowledgeable people willing to help.

Inventory service does not start 610 failed login

L.S.
Netware 6.5, SP6
ZEN 7.01SP1IR1
Sybase database
Standalone server
My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
C1, Inventory service object shows 610: database location policy is not configured (but it is)
NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
Any suggestions
Thomas Roes

Thomasroes,
either of these help?
http://www.novell.com/support/php/se...1%200%20506894
http://www.novell.com/support/php/se...1%200%20506894
Shaun Pond

Photoshop 32bits does not start up anymore on Windows 7 64bits.

This is the situation:
We have 2 PCs that have been configured identically, with the exception of a scanner (canonScan 9950F) attached to the computer and the 32 bits twain scanner driver installed.
Both PCs worked correctly, the one with the scanner attached started 32 bit PhotoShop when there was need to scan. But for some obscure reason, 32 bits Photoshop does not work anymore. I have tried disabling the twain driver (by moving it out of the plugins directory), restarting the machine, updating to the latest software, but despite this, Photoshop does not start anymore... no beep, no crash, no nothing.
I deinstalled Photoshop, Reinstalled - same phenomena.
At least the Event Viewer of Windows has something to tell, even if it is not quite understandable to me:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2011-07-04T15:39:45.000000000Z
EventRecordID
8452
Channel
Application
Computer
pwlu0w977.paulwurth.agn
Security
EventData
Photoshop.exe
12.0.0.0
4bbc56b6
Photoshop.exe
12.0.0.0
4bbc56b6
c0000006
00e8beff
12b4
01cc3a608276fe50
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
d70b772e-a653-11e0-b8c6-6431503f59b8
May be someone out in the user community has a solution? Needless to say, that the second machine works fine!
Lucien.

The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel

Integration Process does not start

Hi guru's
My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
We run just around 11000 CREMAS idocs now.
The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
I've run many checks on both environments and they all look the same.
To name a few:
* Cache are all green and up-to-date.
* I checked the WF models which are behind the Integration Process and they are the same.
* Event correlation is correct in both environments
* When i test the idocs are correctly sent from ECC to PI.
However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
I'm probably missing some configuration somewhere but what could it be?
Regards
Robert

Hi Eng Swee,
Thx. I checked it already and it works fine.
Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
I now cleared some old workitems and started afresh.
What i see now is:
1) the BPM process start correctly
2) it receives 1 or 2 or 3 or n messages
3) it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
On DEV the deadline works fine. On QA it doesn't.
IN SWU3 i have done the customizing and it shows green, so that part is OK.
Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
Are there any other checks i can do to see if the deadline mechanism is properly working?
Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
(Sorry for earlier confusion but i hadnt realized that there was still a process running)
Regards
Robert

Cssd does not start in non-RAC environment Thus we can not bring up ASM

Non-RAC environment
ASM version = 11.1.0.7
HP-UX Itanium 11.23
After power outage, CSSD does not start on non-RAC environment
Running as root "/sbin/init.d/init.cssd start" does not start cssd
Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
but it did not start CSS
Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
It started the CSSD and the "crsctl check css" came back with CSS is healthy
But around 1 minute later it rebooted the server and when it came up again CSS does not start.
They checked /etc/inittab and it looked fine.
Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
Cluster Ready Services completed waiting on dependencies
Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
Our test system has been down for a week and we did not get the resolution from Oracle support yet !
Any pointers are greately appriciated.
Thanks,
Dzung

Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
2010-07-16 09:42:02.956
[client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
2010-07-16 09:42:02.971
[client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
2010-07-16 09:42:03.054
[client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
y formatted using version 2. Ignore earlier CRS-1006 messages if any.
2010-07-16 09:42:46.379
[cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
setsid: failed with -1/1
s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
s0clssscGetEnvOracleUser: info for user oracle complete
07/16/10 09:42:36: CSSD starting
Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
[    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
[    CSSD]CLSS-3001: local node number 0, master node number 0
[    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
[    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
[    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
[    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
[    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
[    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
[    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
[    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
[    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
[    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
[    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
[    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
[    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
[    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
[    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
[    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
[    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
[    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
[    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
[    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
[    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
[    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
[    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
[    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
[    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
[    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
[    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
[    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
[    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
[    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
[ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
[ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
[ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
setsid: failed with -1/1
dskm_getenv_oracle_user: calling getpwnam_r for user oracle
dskm_getenv_oracle_user: info for user oracle complete
07/16/10 18:33:31: Master Diskmon starting
Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
[ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
[ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
[ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
[ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
[ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
[ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
[ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
[ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
[ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
[ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
[ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
[ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
[ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
[ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
[ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
[ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
[ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
[ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
[ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

IAS does not start when using SSL

Hello all,
I hope I hit the correct board for this question and search did find anything useful for my Problem.
We have a couple of Oracle Databases which are using IAS to serve a PL/SQL and Perl based WepApp. The Databases are 10g (10.2.0.3), and the Servers are running Novell SLES 9 x86_64 (SP 3). We need https on these Machines, so I configured the Server for SSL, created a Certificate using Wallet Manager and so on, exactly as described in the Documentation.
However when I try to start the HTTP Server with "ssl-enabled" in opmn.xml to enable SSL it does not start any more. It simply cannot load the "mod_ossl.so" Library:
Logfile says:
/opt/oracle/product/10.2.0/http_1/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 246 of /opt/oracle/product/10.2.0/http_1/Apache/Apache/conf/httpd.conf:
Cannot load /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.so into server: /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.
so: undefined symbol: dbm_firstkey
I have googled and searched Metalink but did not find anything useful. I assume that "dbm_firstkey" refers to the GNU database routines (gdbm), but I am kinda stuck right now. Has anyone stumped upon this maybe?
Kind Regards
Maik

Two issues:
- this does not look like OracleAS, but like the HTTP Server from the database;
- you seem to be loading a 32 bit process (apache/httpd) into a 64 bit shell.
try starting it within 'linux32 bash' instead.

Node Manager installed as service does not start managed servers. WLS 10.3

Hi All,
I have installed the node manager as a windows service. When the service starts up it does start the managed servers.
In the nodemanager.log file it shows that the node manager is reading the startup.properties file for all of the managed servers.
<Jul 24, 2009 6:38:13 AM> <INFO> <Loading domains file: C:\bea\WLSERV~1.3\common\NODEMA~1\nodemanager.domains>
<Jul 24, 2009 6:38:13 AM> <INFO> <Loaded node manager configuration properties from 'C:\bea\WLSERV~1.3\common\nodemanager\nodemanager.properties'>
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <IntegrationServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\IntegrationServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <ProdBackupServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\ProdBackupServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <Info> <SalesIllustrationDomain> <QAServer> <Startup configuration properties loaded from "C:\bea\user_projects\domains\SalesIllustrationDomain\servers\QAServer\data\nodemanager\startup.properties">
<Jul 24, 2009 6:38:13 AM> <INFO> <Plain socket listener started on port 5556, host localhost>
The node manager properties file contains the following
#Mon Apr 20 10:54:45 PDT 2009
DomainsFile=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.domains
LogLimit=0
PropertiesVersion=10.3
JavaHome=C\:\\bea\\JROCKI~1
AuthenticationEnabled=false
NodeManagerHome=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1
LogLevel=INFO
DomainsFileEnabled=true
StartScriptEnabled=false
StartScriptName=startWebLogic.cmd
ListenAddress=localhost
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=false
LogCount=1
StopScriptEnabled=false
QuitEnabled=false
LogAppend=true
StateCheckInterval=500
CrashRecoveryEnabled=true
LogFile=C\:\\bea\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
The managed servers' boot.properties file and startup file are below
boot.properties:
#Thu Jul 23 13:48:26 PDT 2009
CustomTrustKeyStoreFileName=C\:\\bea\\wlserver_10.3\\common\\ssl\\supportTrust2008.jks
TrustKeyStore=CustomTrust
password={3DES}mvtUK8oB8JEiQoVES4AQIQ\=\=
CustomTrustKeyStorePassPhrase={3DES}34+15HRlP6qqpZX3bTPp+Q\=\=
CustomTrustKeyStoreType=JKS
username={3DES}P5mMHiWLnf2UtssZbQtezkDtIS0COiHW
startup.properties:
#Server startup properties
#Thu Jul 23 13:48:27 PDT 2009
Arguments=-Xms1024m -Xmx1024m -Xnohup
JavaHome=C\:\\bea\\jrockit_160_05
SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
RestartMax=2
RestartDelaySeconds=0
RestartInterval=3600
BeaHome=C\:\\bea
ClassPath=C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\lib\\itext\\WEB-INF\\lib\\itext.jar;C\:\\bea\\wlserver_10.3\\server\\lib\\weblogic_sp.jar;C\:\\bea\\wlserver_10.3\\server\\lib\\weblogic.jar;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\massmutual\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\assuritylife\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\applications\\minnesotalife\\WEB-INF\\classes\\;C\:\\bea\\user_projects\\domains\\SalesIllustrationDomain\\servers\\ProdBackupServer\\lib\\ltclibrary\\WEB-INF\\classes\\
AdminURL=http\://localhost\:7001
JavaVendor=BEA
AutoRestart=true
AutoKillIfFailed=false
I am wondering if I left out a parameter some where.
Any help would be greatly appreciated.
Thanks,
Greg

First of all, I assume you mean "... up it does NOT start ..."?
It might be helpful to point out that the purpose of the NodeManager is not to start the servers, but to "control" the servers through remote commands. When the NodeManager starts back up, it tries to reset the servers to the last known state it set them to, based on remote commands.
For instance, if your system was running and you stopped the servers through the admin console and then restarted the machine, the NodeManager would not start the servers on machine startup, because the last controlled state of the servers was down. If all of your WebLogic servers were running as a result of NodeManager commands, and you pulled the plug on the box, when you restarted the machine, the NodeManager probably would restart the servers.

Oracle DBconsole service does not start

Hi,
Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
Thanks for your help.

Thank you Madrid. I resolved the problem. I had this :
set ORACLE_SID=ORCL2
C:\Documents and Settings\> emctl stop dbconsole
OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
can anyone answer please ?
Message was edited by:
user522961
Message was edited by:
user522961

Oracle does not start

Hi,
I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
What can I do to start oracle with or without internet connection.
On windows I used a loopback adapter. Is here any method?
Thank you

Hello,
ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
http://www.informit.com/articles/article.aspx?p=25845
From the below documentation:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
"+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
Hope this help.
Best regards,
Jean-Valentin

XCM configuration does not start up

Similar Messages

Maybe you are looking for