"Xcode cannot run using the selected device" for no apparent reason.

EDIT: It was just because I hadn't told Xcode to use my iPhone for development... I thought I had already done that. I also had to wait a few minutes after enabling it for development for it to actually work.
I'm using Xcode 5 and an iPhone 5 for development. I made an app ID with the ID "com.myname.agreementfinder". Then I made a development provisioning profile linked to that app ID. In my developer provisioning profile dashboard, it clearly says that the app ID is "com.myname.agreementfinder". I downloaded the provisioning profile and put it on my iPhone using the Xcode organizer, no problems. So now I have a profile in my organizer that has the app identifier "U2M9******.com.myname.agreementfinder" (part of it censored). Not sure what that weird number at the beginning is, but my other profiles have one too.
I have a project with the bundle identifier "com.myname.agreementfinder" and deployment target iOS 7.0 on iPhone, so it should work with that, right? Actually, the project was renamed from "FBFun". Well Xcode keeps saying that it can't run it on there because "No provisioned iOS devices are available with a compatible iOS version." I wish it would say which, invalid version or no provisioning profile
How should I fix this? It seems like everything is already fine, yet it won't work. Could it be that renaming the project caused problems?

I did. I did "Product -> Clean", it replied : "Clean vog_x20_new: Succeeded" and then I did "Product -> Build", and it replied "Build vog_x20_new: Succeeded".
Ok, so I may have misunderstood my own problem. It's not a compilation problem. But, I still have the same message when I try to run the program (i.e. "Xcode cannot run using the selected destination").
So it seems that I can build the project but I cannot run it.
Here is a screenshot of the error windows
So what should I do next ?
Thanks for you attention and help.

Similar Messages

HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Turning off iCloud and multitasking gestures on the iPad might also help.

HT202157 when using airplay mirroring it will drop the screen be for no apparent reason. This is a new problem ;it has been working fine.

Airplay is dropping out for no apparent reason; it has ben working fine and will reconnect for a time and then drop again.

Hello Cate,
Thank you for the details of the issue you are experiencing with AirPlay on your Apple TV. I found a couple of resources I recommend for the issue you described.
If you are experiencing the issue when AirPlaying from from an iOS device, I recommend following the steps in the section titled "Troubleshooting performance issues with AirPlay or AirPlay Mirroring" in the following article:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
If the issue you described happens when AirPlaying from your computer to your Apple TV, I recommend the section titled "Troubleshooting performance issues" in the following article:
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts5209
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT4060 charging not supported by this accessory after using the same device for a year

I own a first gen iPad. I have always used the same wall charger to charge it for the past 17 months. Suddenly I get this message that charging is not supported by this device. So I plug it into my iMac to charge.....same message. This is a software problem. I find that thousands of owners or iPads and other ios devices are all suddenly having the same issue. Apple has to offer a update to fix this. It is not a cable or connector or hardware issue. The only way I can now charge my iPad is to do a reset. Then it will charge for a few days normally until this message comes back. APPLE PLEASE ACKNOWLEDGE THIS PROBLEM AND ISSUE AN UPDATE TO FIX IT NOW.

This is an iPad user to user forum. Apple does not read posts.
Suggest you update to the current iOS version 5.1.1.
Look at Apple feedback.
http://www.apple.com/feedback/ipad.html
 Cheers, Tom

I have a Canon MX880. It quit printing with the cyan color for no apparent reason.

I have a Canon MX880 printer. For some reason, it no longer uses the cyan color with printing. I have all colors except those that need cyan. The cartridge is full. Cleaning didn't help.
Solved!
Go to Solution.

Hi br3753,
I know you mentioned already doing cleanings, but I wanted to recommend if you havent already done so to please try 3-4 consecutive cleanings for the best results. If this does not work I would recommend using the Contact Us link to get in touch with out live support staff who can provide warranty options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Running out of disk space for no apparent reason

My system drive is almost full but I can't find the files that are causing the problem. When I add up the numbers they only come up to 55GB and I have 120GB drive with only 6GB available.

How much available space do you see when you right click on your hard disk (usually Macintosh HD) and use Get Info?
How does that compare to the free space at  > About This Mac > More Info… > Storage?
If there is a large difference it could be Time Machine snapshots that can use up to 80% of your disk. This is not a problem, it is a feature. To gain the disk space back, plug in your Time Machine disk and run a backup.
See The Storage Display: http://pondini.org/OSX/LionStorage.html .
Also see:
Where did my disk space go: http://pondini.org/OSX/DiskSpace.html
and Time Machine FAQ, What are Local Snapshots: http://pondini.org/TM/30.html .
If it is not Time Machine snapshots or you otherwise want more disk space then see which files you can clean up, remove or offload.
See https://discussions.apple.com/message/24012341#24012341 .

ITunes - if I use it Safari quits for no apparent reason.

ever since version 6.something using iTunes seems to cause problems with other programs quiting/crashing, and iTunes at times. Anyone else have this problem?

A spelling or punctuation mistake, or sometimes a trailing space usually causes this after the artists and/or song name, which fools the iPod into thinking that there are two different artists or songs. The trailing space is the hardest to spot.
Best way to cure this is to go into iTunes, highlight that artist and/or songs, right click on them and select "get info".
This brings up the multiple song info window. In the artist or song box retype the name, as you would like it, and then click ok. Do this even if no mistakes are immediately visible.
Re sync this new artist/song info to your iPod.

Optical Drive Accesses for No Apparent Reason

I have a new HP Pavilion dv7 laptop with Windows 7 64-bit OS. My question concerns accesses to the optical drive for no apparent reason. While it seems reasonable that when booting up the system the firmware will check the optical drive to see if there is a startup CD in it I do not understand other apparent attempts to access the optical drive. For example, after bootup and running within Windows 7 I attempt to play a mp3 music file residing on the hard disk I can hear the optical drive being accessed. Specifically, I double click on a mp3 file on my hard disk but before the music player application pops up I hear several clicks and clacks as the computer checks the optical drive for a disk...I assume. Is there a setup file someone where this kind of activity is enabled? IMHO, the computer should not be attempting to check the optical dirve when attempting to play a mp3 file on the HD.
Another scenario I've noticed is during the logon process. Specifically, as the computer boots up there is a typical click-clack of the optical drive as the firmware checks to see if there is a startup CD in the drive. Next, Windows 7 in up and running but sitting on the user logon screen. When I type my password to log onto my account I hear more click-clack accesses to the optical drive. This may be a typical thing for Windows 7...I'm not sure as I'm new to Windows 7. However, the description I gave above concerning playing of mp3 music seems odd.
The sound I hear is definitely not the hard disk. It is the same sound that the optical drive makes if you open the drive and close it without inserting a disk. That is, the laser tracking motor moving the laser pickup from the outer edge to the inner edge and back to check to see if a CD or DVD is sitting in the drive. Playing an mp3 music file residing on the hard disk causes this to happen. It only happens once when starting up the music player.

Hi There,
What is the media application you have in the computer? Such as Intervideo windvd. cyberlink etc…
Few applications keep checking the media even though these applications are not in use. Fixes for such applications are posted on respective support websites, you may want to check and update. or if you do not wish to use such applications you can try un-installing these applications and verify the functionality.
Hope it helps.
Thank you,
Waseem – HP 2LS
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

MTA Crashes for no apparent reason

Running GW 7.0.2HP on SLES10SP2 OES2. GroupWise has been running fine since I put on the HP, so I haven't obviously bothered with it for quite awhile (if it's not broke, don't fix it), but now the MTA crashes for no apparent reason throughout the day. I reload it, and it runs fine for a couple of hours then crashes again. I changed the logs to verbose, but so far nothing seems to make sense. Below are a couple of entries from the previous logs. Any help will be appreciated.
Thanks,
Hogan
.....Entries in the log before the crash
09:03:42 472 RTR: FAE1_Domain: 000c38f3.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f3.3W4 (4 kb)
09:03:42 616 RTR: FAE1_Domain: 000c38f4.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f4.3W4 (4 kb)
09:03:42 856 RTR: FAE1_Domain: 000c38f6.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f6.3W4 (4 kb)
09:03:42 616 RTR: FAE1_Domain: 000c38f7.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f7.3W4 (4 kb)
09:03:42 856 RTR: FAE1_Domain: 000c38f8.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f8.3W4 (4 kb)
09:03:42 848 RTR: FAE1_Domain: 000c38f9.XK4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f9.XK4 (4 kb)
09:03:42 680 RTR: FAE1_Domain: 000c38fa.EB4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38fa.EB4 (10 kb)
09:03:42 240 RTR: FAE1_Domain: 000c38
.....Entries in the log during the next restart
09:07:36 208 Starting GWHTTP-Listener
09:07:36 992 DIS: MTA configuration loaded
09:07:36 992 Zeli1_PO: Post office now open
09:07:37 592 LOG: Opening new log file: 0111mta.002
09:07:37 400 RTR: FAE1_Domain: 000c3934.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3934.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3936.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3936.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3938.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3938.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3939.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3939.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c393b.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c393b.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c393f.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c393f.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3942.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3942.3W5 (1 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3943.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3943.3W5 (1 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3944.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3944.3W5 (1 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3945.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3945.3W5 (1 kb)
09:07:38 080 FAE1_Domain: Domain now open
09:07:38 312 FGRPGWIA: Gateway now open
09:07:38 544 WEBAC70A: Gateway now open
09:07:38 392 Zeli1_GWRemote1: Gateway now open
09:07:42 400 RTR: FAE1_Domain: 000c3949.SH4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3949.SH4 (3 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394a.FI4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394a.FI4 (9 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394b.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394b.3W4 (4 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394c.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394c.3W4 (4 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394d.MR4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394d.MR4 (15 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394e.ZB4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394e.ZB4 (3 kb)

Hi Michael,
i think there is a newer patchlevel available (7.03 Hp4).
Maybe you can update your agents.
Do you get error messages (var/log/messages), etc.?
Kind regards
Frank Diekmann
Originally Posted by Michael Hogan
Running GW 7.0.2HP on SLES10SP2 OES2. GroupWise has been running fine since I put on the HP, so I haven't obviously bothered with it for quite awhile (if it's not broke, don't fix it), but now the MTA crashes for no apparent reason throughout the day. I reload it, and it runs fine for a couple of hours then crashes again. I changed the logs to verbose, but so far nothing seems to make sense. Below are a couple of entries from the previous logs. Any help will be appreciated.
Thanks,
Hogan
.....Entries in the log before the crash
09:03:42 472 RTR: FAE1_Domain: 000c38f3.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f3.3W4 (4 kb)
09:03:42 616 RTR: FAE1_Domain: 000c38f4.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f4.3W4 (4 kb)
09:03:42 856 RTR: FAE1_Domain: 000c38f6.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f6.3W4 (4 kb)
09:03:42 616 RTR: FAE1_Domain: 000c38f7.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f7.3W4 (4 kb)
09:03:42 856 RTR: FAE1_Domain: 000c38f8.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f8.3W4 (4 kb)
09:03:42 848 RTR: FAE1_Domain: 000c38f9.XK4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38f9.XK4 (4 kb)
09:03:42 680 RTR: FAE1_Domain: 000c38fa.EB4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c38fa.EB4 (10 kb)
09:03:42 240 RTR: FAE1_Domain: 000c38
.....Entries in the log during the next restart
09:07:36 208 Starting GWHTTP-Listener
09:07:36 992 DIS: MTA configuration loaded
09:07:36 992 Zeli1_PO: Post office now open
09:07:37 592 LOG: Opening new log file: 0111mta.002
09:07:37 400 RTR: FAE1_Domain: 000c3934.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3934.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3936.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3936.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3938.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3938.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3939.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3939.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c393b.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c393b.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c393f.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c393f.3W4 (4 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3942.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3942.3W5 (1 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3943.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3943.3W5 (1 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3944.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3944.3W5 (1 kb)
09:07:37 400 RTR: FAE1_Domain: 000c3945.3W5: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/5/000c3945.3W5 (1 kb)
09:07:38 080 FAE1_Domain: Domain now open
09:07:38 312 FGRPGWIA: Gateway now open
09:07:38 544 WEBAC70A: Gateway now open
09:07:38 392 Zeli1_GWRemote1: Gateway now open
09:07:42 400 RTR: FAE1_Domain: 000c3949.SH4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c3949.SH4 (3 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394a.FI4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394a.FI4 (9 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394b.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394b.3W4 (4 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394c.3W4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394c.3W4 (4 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394d.MR4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394d.MR4 (15 kb)
09:07:42 400 RTR: FAE1_Domain: 000c394e.ZB4: Routing /var/opt/novell/groupwise/mail/domain/mslocal/gwinprog/4/000c394e.ZB4 (3 kb)

CS5: Times (T1) being substituted for no apparent reason

This is happening with maddening frequency:
I have an InDesign CS5 document open. I select several items, some of them being text boxes. I copy the items, then tab over to another open document. I paste the items.
For no apparent reason, some of the fonts in the pasted items will spontaneously change to Times (T1), and be highlighted in pink, signifying that I do not have that font installed.
The default font is set as Minion Regular. I have Minion Regular installed on my Mac, naturally. I do not have Times (T1) and I don't think I ever did. I think it has something to do with paragraph styles, but the default Basic Paragraph font is Minion Regular. If it subs anything (and why should it be??) I would think it would default to Minion, not some font I don't even have installed.
Why is InDesign changing my fonts? Is this a bug that has been fixed in CS5.5?
Thanks in advance.

The reason Peter would ask that what you are reporting sounds exactly like a situation where your source document from which you are copying has a different Basic Paragraph style from the document into which you are pasting. So, if you only looked at the Basic Paragraph style in your source doc, it wouldn't tell you anything. I'm perfectly willing to assume that you checked both source and target style definitions, I guess.
However, there are a few other ways to generate similar results - e.g. let's say you have frames defined in your source doc with the Basic Text Frame Object Style - note that this is an object style, not a text style. However, it's possible to specify a paragraph style in an object style, and maybe the Basic Text Frame in your target doc specifies a paragraph style with Times? Something similar can be done with Table Styles and Cell Styles, are there any tables in what you are copying and pasting?
These are, obviously, just guesses. Other guesses (without any evidence to support 'em) might be document corruption (export INX or IDML, re-open and re-save) or remotely possible preferences corruption or application corruption (reset preferences, or reinstall app).
Lastly, if you can (you may be working on something sensitive, or covered with Do Not Distribute flags), you may just want to post a link from which the forum regulars can download your misbehaving InDesign files. Sometimes, what takes dozens of careful messages to uncover can be found in thirty seconds of clicking.

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

When ever I use Adobe reader 11 with a USB device, I cannot safe remove the USB device and get the following message (or similar one) in system log: The application \Device\HarddiskVolume1\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe with pr

When ever I use Adobe reader 11 with a USB device, I cannot safe remove the USB device and get the following message (or similar one) in system log: The application \Device\HarddiskVolume1\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe with process id 6620 stopped the removal or ejection for the device USB\VID_05DC&PID_C75C\20131215015821328FC8.
I am running on Windows Server 2012 R2 in Desktop Experience mode.
Any ideas?
Roger

In addition to that symptom, I discovered that even though I had closed all Adobe Reader sessions, the processes kept running and used up 90%+ of my CPU.

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

"Xcode cannot run using the selected device" for no apparent reason.

Similar Messages

Maybe you are looking for