Xerox Phaser 6350DP - Connected and Ready but will NOT PRINT!! Help.

'm using OS 10.4.11 to connect to a printer on a Windows server using LDP. I can add the printer, the PPD works, and when I print, the job shows up in the queue, then moves to the "Completed" section. But it never prints. I can even go to "Supply Levels" and it gets the correct toner levels for the printer, so I know they're connecting. But my computer thinks the job has printed, even though it hasn't. What gives?
The Printer is connected to one Router (PC Based) and from the Router one other computer is connected (Windows PC). I can talk to the computer and do test pages and everything but when i try to print anything from my computer it says the Job was completed when it hasn't printed a thing.
Please Help. If i have to re-install the OS will i lose ALL files i have saved??
Please tell me step by step for i am a novice.
Thank you for your help and time,
B
Tech Details:
-Dual Processor PowerPC
-OS 10.4.11
-Xerox Phaser 5500N & Xerox Phaser 7750DN, both connected via Ethernet to Windows server

Please Help. If i have to re-install the OS will i lose ALL files i have saved??
Yes you would, unless you use the Archive and Install feature...
http://docs.info.apple.com/article.html?artnum=107120
Yet it seems that isn't the problem.
This Supply level & such... that is seen/done on the Mac?

Similar Messages

Photosmart 6520 e Windows 7 printer says it is connected to network, but will not print.

I've followed all suggestions in troubleshooting both from manual and on line. Shut off firewall, unplugged, plugged waited. Nothing changes. All printouts from the printer say connected, but will not print and computer detection of the printer says cannot be located. Help!!

Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Last night, I plugged in my nano to sync and could not pull up the summary page. It will connect and charge, but will not pop up as a "device" in left column. I can't sync. how can I fix this?

Last night I tried to sync my IPOD nano, and could not pull up the summary page. It would connect and charge the IPOD, but did not pop up as a "device" in the left column, so I could not click it and get to summary page and sync new music. Same laptop for a year, same IPOD, synced 3 days ago with no problem. Now all of a sudden, I can't sync. No message or other window pops up to tell me if something is wrong. How can I fix this?

Please authorize ADE 3 with same credentials that you used with older version of ADE

HT3500 hp 4000 connected to mac but will not print

I am connected to HP4000 on my network but when I print, the copy has no words. The preview shows the copy I want to print but it does not print. I have Maverick. Do I need to update to snow lepard fonts or what do I do.

Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Fonts in Indesign CS3 View and Save But Will Not Print

Hi - this thread has been going a bit elsewhere but I have a bit different symptoms. Just updated from 6.5 Pagemaker to CS3 on a new Vista system. Indesign shows my collection of over 300 fonts, which are installed in the Windows Font folder (and available to and working in all my other programs)and it previews and saves documents with them correctly. But when I go to print I get the famous "font not installed" message. I check the pull down - and they are all there on the command bar. But when I go direct to the folder - only one arial font is there. OK, so I try copying, or moving the font files from the windows folder to the Adobe Fonts folder, and Vista won't let me. It grays out all option paths. HELP! And please, after reading the other threads - don't tell me I have to go in and rename each of these 300 fonts. Actually, I am not a programmer and have not the least idea why this is but for the cost of this software - there must be a patch? Or, I hope - it is simply that I am doing something myself very dumb? PS - I have Microsoft Word and Office 1997 on the system so its not the "2003 or newer" answer - as well as fonts I have purchased both before and after 2003 or 2006! Help! I'm dead in the water here. Mike P.

Hi Guys - here are the answers to your questions...
1- I have no font manager installed that I am aware of - I have all the Adobe CS3 Indesign, Photoshop and Utlitites - but unless it came packed in there, I just loaded straight over a new computer with a new Vista.
2- I tried to export to eps or PDF and print - same thing - it showed the font correctly, named it corectly, but then when I hit the button it came up "font missing" and refused to save or print.
3- I did not delete any files, but Dominic - I did a search and could not find adobefnt.db or fntnames.db on the computer? Is it possible I need to find these on the CS3 disc and copy them in? Under what folder?
4- when I click on the fonts under font find - again, they are correctly viewed and named, but the path comes up empty. No clue as to where they are housed. And they are not in the empty Adobe fonts folder.
Thanks guys. Anything here helpful?
Mike P.

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

Samba cups and windows 8: printer spools but will not print.

Hello,
I have samba and cups setup. I have been trying to connect to my windows printer. Here is my setup
Arch linux linux-3.12.1-3
samba-4.1.2-1
cups-1.7.0-2
Windows 8.1
no firewalls
Samba config
[global]
security = user
#passdb backend = tdbsam
#username map = /etc/samba/smbusers
workgroup = Bobshouse
encrypt passwords = yes
wins support = yes
log level = 1
max log size = 1000
read only = no
#disable netbios = yes
printing = cups
printcap = cups
[homes]
browsable = no
map archive = yes
[Shared]
browsable = yes
read only = yes
path = /home/bob/Share
for cups some things I have tried are
lpd://hostname/printer
smb://username:password@hostname/printer_name
I can see the printer with smbclient
So the printer spools, but will not print. the paper does not move I just hear the printer. Also when I watch the print queues in windows and linux. Cups shows that it sent the document, but when I watch the windows queue it shows the document, but the size of the document stays at 32 kb out of 1.8 mb and says printing. I hope this makes sense. I am just trying to keep things very simple at this point. I just want to understand what the problem is and build on it.

Please provide the following relevant information so someone can help including:
Printer Model - done
Complete and Detailed Problem Description -
Operating System of computer (including service pack revision) - done
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? –
Power off printer and router. Power on router and wait 3 mins, power on printer. Does it connect to the router now? Do you have a valid IP address?

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My ipod touch is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed

My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.

2.2.1 is not the latest available for any ipod touch.
Is yours the original ipod touch?
If so then:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices

I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices. Help please

The ipod is not a backup/storage device.
You need to copy everything from your old computer to your new one.
The Apple store will do this for you, you can call apple support and they will help you, you can use google.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.

I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks

Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?

Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?

P.s. it is now going to apple logo on white screen then switches off

I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open.

I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open. This is very annoying.

If this is an external USB drive, you must understand that USB is really, really slow. There may be nothing wrong except for that.
In my opinion, USB external drives are only acceptable for backups, and to get "near Hard Drive" performance, you need FireWire.

Ever since I updated to Yosemite my mac book pro keeps asking for Apple Id and password but will not accept them

Ever since I updated to Yosemite my mac book pro keeps asking for Apple Id and password but will not accept them. What can I do?

Try the advice here. I had the same problem and it worked for me.
You have to delete the "SC Info" folder from /Users/Shared. You will have to use Terminal to enable you to see this folder first. Make sure iTunes is not running when you delete the "SC Info" folder
There is an article from Apple on this here. The "SC Info" folder contains iTunes authorization information.
I did this two weeks ago and iTunes accepted by login. I haven't been asked for my AppleID or password since.

Xerox Phaser 6350DP - Connected and Ready but will NOT PRINT!! Help.

Similar Messages

Maybe you are looking for