Xfce4 and dual screen issues

I have setup dual screen in xfce4, i have added
xrandr --output VGA --left-of LVDS
to xfce4 startup apps. But the issue is that both screen defaults to 1024x768 and if it change the resolution to the correct one my laptop screen turn black. This is some what the similar kind i issue i face in kdemod4 but gnome work ok with with the above command.

What video card?
What drivers?

Similar Messages

Dual screen issue

Hi Team,
I have dual screens. A Dell P190S (1280x1024) and a HP ZR22w (1920x1080). I have also an Intel® Q45 and Q43 Express Chipsets in my desktop PC.
When I use PS, sometimes the circle which indicates the size of the draw tool or the earse tool is freezing on my screens. Even if I close PS, it is still there or even when I lock my computer is still there.
Unfortunately I haven't found any solution for this issue.
Is it because of the different screen resolution?
Message was edited by: gaborf

OK, so we are talking about the same ball park circumstances from the historical problems with brush cursors. I think Compaq computers are rather arbitary regards hardware and drivers, and don't usually allow much in the way of upgrading, so you could be stuck with what you have got. All I can suggest it homing in on those paramiters with Google
Photoshop CS4 cursor issue or problem
sort of thing.
This is the sort of hit you'll find
http://www.earthboundlight.com/phototips/photoshop-cursor-problems.html
You'll hopefully find something that rings a bell or matches your circumstances closely. Good luck.
[EDIT] I wonder if your hardware will support Windows 7? It has excellent dual screen support. That irrifutable law of presentations, that 'when a Powerpoint and projector were involved, there will _always_ be a problem' has finally been broken. If your employer was daft enough to invest in Compaq hardware, I doubt you'll get any help from them.

R6870 Hawk Dual screen issue

Hey there,
(R6870 HAWK)
The issue is: I cant get a dual screen on my card, no matter what I try.
Both screen and cables are working just fine (I tried all possible combos), but there is simply no way I can get 2 screens to work at the same time.
Any ideas?
Many thanks...

Are you using the two DVI ports ?
Swop the two monitors around by switching the cables on the card DVI ports. Does the other monitor work when you do that ?
Also chek what DVI connectors are present on your monitors ? Do they differ ? see this guide to the different DVI connections. http://en.wikipedia.org/wiki/Digital_Visual_Interface

KVM Between Mac Mini and Dual Screen PC????

Hello All,
I was wondering if one of you has the answer this.....
For work I am now working remotely from home. I have a ThinkPad W520 with Dock and two 19" ViewSonic monitors both with DVI cables. Since space in my place is an issue, I want to share my sons desk wich has a Mac Mini with an HDMI to DVI cable to a 19" Monitor.
My question is......is there a KVM switch out there that will allow for my setup plus keyboard and mouse to be used with the Mini? Then he can run dual screens on the Mini when I am not working.
Thanks for the help with this one!
Alex

I am not aware of any KVM which can share two screens. The best you are likely to be able to do is put one of the screens with the keyboard and mouse on a KVM and share those.
You could also have a look at http://synergy-foss.org/

I'd like to see next generation of Touchsmart PC with Touchsmart keyboard and dual screen

Where you have a monitor as the display and a seperate keyboard, but the keyboard is another monitor which operates as a keyboard, for example something like this...
This ultimately would mean that the keyboard could be application driven, that is it could be specifically configured anyway that the application requires it. I'd also like to see a dual screen option for touchsmart PC - a screen that is built in and can be slid out from the rear of the monitor to act as dual screen, extended screen...
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Jim,
You may want to check out this community for developers. I'm pretty sure HP is aware of the goings-on in these forums:
http://www.touchsmartcommunity.com/forums
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Using Keynote with Podcast Capture and Dual Screens

Hi everyone,
We are trying to use a dual screen setup to record some Keynote presentations using Podcast Capture (i.e Dual mode, with the Keynote presentation in one screen and the presenter in the other).
The problem we are having is that when in full screen mode, Keynote takes control of both displays, thus stopping the Podcast application from being displayed. Even if we switch off the Presenter Display on the second screen, the second screen turns black.
I know we can start and stop recording with hotkeys, but we would prefer to be able to see the Capture app in one window with the presentation full screen in the other.
Perhaps this is just an oversight on Apple's part, but I'm finding it hard to believe its not possible. If anyone else has a workaround then please share.
Thanks.

Other applications are not visible when Keynote is playing back. Keynote takes over control of the graphics system when playing back presentations to enable Keynote to display properly.
When I play back Keynote and I want to look at a second application, I use a second Mac.

Simple dual screen issue.

Hi,
for some reason ever since I rebooted my macpro the dual screen layout has switched. On my right screen is the dock and upper info bar but I want that on the left screen. It has always been on the left screen till the reboot. I cant seem to find anything in the settings.
Thanks
Neil toor

System Preferences -> Displays -> Arrangement.
Drag the menu bar to the screen you want it to be on, the Dock will follow.

MEGA PC And Dual Screen

Hello everybody
(sorry for the faults i'm french)
I had a Mega-PC 651 whit a celeron 2Ghz, 512 of RAM, and a Geforce 4 card.
I would like to know if we can use the graphic chipset of the MegaPC AND a graphic card.(Because I would like to do a dual screen computer).
Help me please : firts to know if it's possible and secondly if you can give me a little Howto.
Thanks creon

I haven't seen your card, but if the diminsions are anywhere near the same as my AIW, it's a pain in the @$$ to install; but not impossible. If this was a 'normal' computer, my answer would be YES it will work, but because this MEGA180 has been nothing but a pain in the but, I have to say PROBABLY it will work. I posed a fairly detailed description of what I had to go through to get my card installed, maybe reading that will give you some idea about what may need to be done in your case.
Good luck

GTX 780TI GAMING 3G dual screen issue

Hi,
Been searching around but I don't seem to be able to hone in on the right search criteria to find anything.
I have the 780ti running dual screens. I have a nice new 144hz widescreen and I'm running an old Philips 75hz as general purpose screen next to it. I'm keeping hold of the old one at the minute as it works well with my gfs work laptop when she needs a full screen.
When I bring a game up and try and run it on the 144hz screen it tries to swap screen constantly. It flicks back and forwards across both screens at a rapid rate.
I had this working on my very old twin 4870s (you can tell how long I've been out of the game literally) but it occurred to me that I was running a screen off each card. So now I'm wondering if I can run two screens of one 780ti? If that's the case I'll just get another one which I plan to do in the future anyway. But after splashing out 2k on a new machine spending another 500 isn't going to make the gf happy.

It isn't that I want to run across both.
I wanted the game on 1 screen and another screen to put up web pages, voice server etc.
I guess it is the same difference to the card though. I may just be better of with another card and another 144hz screen.
I would've thought running the game windowed and making sure it didn't stray onto the other screen would be possible.

[Xorg] Dual Screen issue

Hello ladies and gents,
I try since few days to configure a dual screen for my arch.
At least, it doesn't works , my second screen is always black.
My configuration :
I have a Radeon HD 7870
I've installed the opensource drivers xf86-video-ati
I use awesome 3 as window manager
The first screen is plug in HDMI on MDMI-0 (it's a ViewSonic 24" in 1920x1080_60)
The second screen is plug in DVI on DVI-1 (it's a Samsung SyncMaster 24" in 1920x1080_60)
Both of them works fine in standalone.
And both of them works fine together during the boot and the system choice (syslinux).
After the choice, black out for my second screen.
I'have done lot of tries. Any of them works.
I tried to use xrandr :
xrandr --output DVI-1 --mode 1920x1080 --pos 1920x0 --output HDMI-0 --mode 1920x1080 --pos 0x0 --verbose
The second screen is always black et xrandr returns :
crtc 0: 1920x1080 60.0 +0+0 "HDMI-0"
crtc 1: 1920x1080 60.0 +1920+0 "DVI-1"
Same result with arandr
For information :
xrandr -q --verbose
returns :
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 107196
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
HDMI-0 connected 1920x1080+0+0 (0x4a) normal (normal left inverted right x axis y axis) 520mm x 290mm
Identifier: 0x46
Timestamp: 107196
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff005a632a7d01010101
2916010380341d782e2ac5a4564f9e28
0f5054bfef80b300a940950090408180
8140714f0101023a801871382d40582c
450008222100001e000000ff00535848
3132343130303632380a000000fd0032
4c0f5312000a202020202020000000fc
00565832343630205345524945530185
020322f14f900504030207061f141312
1116150123091f078301000065030c00
2000023a801871382d40582c45000822
2100001e011d8018711c1620582c2500
08222100009e011d007251d01e206e28
550008222100001e8c0ad08a20e02d10
103e9600082221000018023a80d07238
2d40102c458008222100001e00000004
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
1920x1080 (0x4a) 148.5MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1920x1080 (0x4b) 148.5MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.2KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.0Hz
1920x1080i (0x4c) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.1KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.0Hz
1920x1080i (0x4d) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.8KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.1Hz
1600x1200 (0x4e) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1680x1050 (0x4f) 119.0MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.7KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.9Hz
1400x1050 (0x50) 101.0MHz +HSync -VSync
h: width 1400 start 1448 end 1480 total 1560 skew 0 clock 64.7KHz
v: height 1050 start 1053 end 1057 total 1080 clock 59.9Hz
1280x1024 (0x51) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x52) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x53) 88.8MHz +HSync -VSync
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 55.5KHz
v: height 900 start 903 end 909 total 926 clock 59.9Hz
1280x960 (0x54) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1152x864 (0x55) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x56) 74.2MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1280x720 (0x57) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 60.0Hz
1440x576i (0x58) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 50.1Hz
1024x768 (0x59) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x5a) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x5b) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
1440x480i (0x5c) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1478 end 1602 total 1716 skew 0 clock 15.7KHz
v: height 480 start 488 end 494 total 525 clock 60.1Hz
832x624 (0x5d) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x5e) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x5f) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x60) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x61) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
720x576 (0x62) 27.0MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.2KHz
v: height 576 start 581 end 586 total 625 clock 50.0Hz
720x480 (0x63) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 59.9Hz
640x480 (0x64) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x65) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x66) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x67) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
640x480 (0x68) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
720x400 (0x69) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x47
Timestamp: 107196
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
load detection: 1
range: (0, 1)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
DVI-1 connected 1920x1080+1920+0 (0x4a) normal (normal left inverted right x axis y axis) 530mm x 300mm
Identifier: 0x48
Timestamp: 107196
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff004c2dcc053432524c
0714010380351e782a6041a6564a9c25
1250542308008100814081809500a940
b30001010101023a801871382d40582c
4500122c2100001e000000fd00383c1e
5111000a202020202020000000fc0053
796e634d61737465720a2020000000ff
0048394d5a3230383438330a2020003f
load detection: 1
range: (0, 1)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
1920x1080 (0x4a) 148.5MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1600x1200 (0x4e) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1680x1050 (0x4f) 119.0MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.7KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.9Hz
1280x1024 (0x52) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x53) 88.8MHz +HSync -VSync
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 55.5KHz
v: height 900 start 903 end 909 total 926 clock 59.9Hz
1280x960 (0x54) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1280x800 (0x6a) 71.0MHz +HSync -VSync
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 49.3KHz
v: height 800 start 803 end 809 total 823 clock 59.9Hz
1024x768 (0x5b) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x60) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x61) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x67) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
And this is my Xorg.0.log file :
http://pastebin.com/Ah79VBbV
I tried differents 10-monitor.conf... without success : My second screen is always black.
A try :
Section "ServerLayout"
Identifier "Main"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "ZaphodHeads" "HDMI-0"
VendorName "ATI"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "radeon"
Option "ZaphodHeads" "DVI-1"
VendorName "ATI"
BusID "PCI:0:2:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "HDMI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "DVI-1"
EndSection
Section "Monitor"
Identifier "HDMI-0"
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Option "PreferredMode" "1920x1080_60.00"
Option "dpms" "true"
EndSection
Section "Monitor"
Identifier "DVI-1"
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Option "PreferredMode" "1920x1080_60.00"
Option "dpms" "true"
EndSection
With Worg.0.log :
http://pastebin.com/n7YpQtfG
Another try:
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "Monitor-HDMI-0" "Monitor0"
Option "Monitor-DVI-1" "Monitor1"
EndSection
Section "Monitor"
Identifier "HDMI-0"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "HDMI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080" "1280x1024" "800x600"
Virtual 3840 3840
EndSubSection
EndSection
With Xorg.0.log :
http://pastebin.com/mvr4Vqvi
Any help/idea would be great.
Thanks.

Hello everyone !
Here is the dmesg :
http://pastebin.com/Jscw6y9i
If it can help.
I'm not sure if i posted in the good section. Maybe i should move the post to Kernel & Hardware ?

Portege R600 / A600 and Dual Screen Output

Hi,
Could you tell me if it is possible to output to dual screens on the R600 or A600 with any of the Toshiba docking solutions?
I have been told it is possible however I was told today by Tosh sales that it is not possible to do. I'd like to do away with my home pc and office pc and just roam between the two with a notebook. However I do use an extended desktop on two screens and would need this to work.
Any advice on this?
Thanks,
Paul

Not sure if you mean two screens plus the laptop screen or two including the laptop, but If it's any help, I use a Slim Port Replicator with my R500 running Vista and have a second monitor plugged into its DVI output. The two screens work fine as an extended desktop.
I also find it useful to install Ultramon (http://www.realtimesoft.com/ultramon/). This adds a task bar to the second monitor.

GTX 560ti Twin Frozr II - Dual Screen Issue + Silent fan speed

Hi, sorry for my bad english :p
CPU : Intel 2500k
Ram : 2x2go Ripjaws 1600mhz
Mb : Asus P8P67-M Pro
GPU : 560 gtx ti twin frozr II
EPU : Corsair 520w
1 - DUAL SCREEN
My first problem is that i can't use a true extended monitor configuration (1 dvi + 1 vga, 1920*1080 + 1280*1024).
Dual monitor work in CLONE MODE but not in extended.
Extended mode use 1 monitor or turn to clone mode automatically :/
EXCEPT after a NEW driver installation. So if i want to use dual screen extended mode, i have to reinstall driver each time i boot...
I have use DriverSweeper in safe-mode but this trick don't work for me. I have the last nvidia driver 270 and i have try the 270 beta driver too.
Into game? That work fine (except some artifacts who appear occasionnaly (one time in metro 2033 and one time in battlefield bad company 2) but it's not fine for a new gpu i think :/)
Can you help me to fix that dual screen problem?
2 - SILENCE
My second problem is that i want a silent computer but the fan are too noisy.
Live Update don't find update for my vga bios (currently at 70.24.0A.00.00)
The SN is : 602-V238-16SB1101159115
Here is a link to my BIOS version extract with GPU-Z : http://skarzag.free.fr/bazar/GF114.bin
I don't know if it can help you :p
Thanks for you're help!

there will be a Tool for it avaiable on donation soon at: https://forum-en.msi.com/index.php?topic=148273.0

Ipad2 upgrade io6 and blink apple sign and home screen issue.

my ipad2 started acting strange after i upgraded to io6. It now display alternating the apple start screen and home screen (blinking).

See if this helps at all. If not, you may have to restore your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

CS5 Dual Screen Issues

I am running a dual screen which essentially creates a workspace that is 3360 x 1050. Dreamweaver CS5 on the MAC Seems to have a mind of it's own in relationship to the space. Is there any way to "contain" it in window like it ran in CS3 on my windows machine?

It's not invisible, just positioned twice as far away as it needs to be.
Have a look at the step-by-step instructions I posted on this thread to get your window back:
http://discussions.apple.com/thread.jspa?messageID=4721686

Display issue with vertical windows start menu and dual screen

Hello everyone
I never reported it and I didn't find any information on google or mozilla support about this so here it is :
I am on windows 7 and I set up my windows start menu vertically. I also have 2 screens. These both points are important. If I put the start menu horizontally I do not have the issue anymore, and If I turn off one screen to have the display only on one screen, I do not have the issue anymore, which is a rare setup I guess so it could explain why this bug has never been detected.
HERE IS THE ISSUE
I have display issues on website with a big width, even the default add-ons Manager firefox page doesn't display correctly. Here is a screen shot:
http://img15.hostingpics.net/pics/368172bugFirefoxDisplay.png
So as you can see the disable and remove button on the right are not displayed, and at the bottom there isn't any scroll bar to scroll ! So I have no way to display the information on the right of the page, and it happens on a lot of other website (gmail, etc)
It is not such a big issue because my start menu is on my left screen and I can move firefox on the right screen to have a correct display.
I still think this is worth reporting this bug. I hope it is clear, feel free to ask questions if you didn't understand.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Xfce4 and dual screen issues

Similar Messages

Maybe you are looking for