XI GRMG Scenarios showing Runtime status Red

Hi,
I configure the GRMG Monitoring for XI.
But I am getting the runtime status RED.
Can any one help in debugging this issue? All my Java Components are running fine.
Thanks,
Nagarjuna.

Hi Nagarjuna,
Please take a look at these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/de/9bdb4064da712ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4f/2c9f3f12e1eb0ce10000000a114084/frameset.htm
cheers,
Prashanth

Similar Messages

Runtime audit browser shows the status busy for the cancelled OWB jobs

Hi ,
I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
I observed the the oracle session (SID:48) was running and killed the session.
After killing the session,the status in runtime audit browser changed to COMPLETED.
Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
Could please tell me why this is happening?
Anything wrong with my configuration?
Appreciate early response.
Thanks,
Naidu

Hi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

In RZ21 the Check CCMS Connectivity is showing status red

Hi,
While configuring ECC5.0 in to solution manager 4.0 I am getting the CCMS Connectivity status red. All the RFC's which were generated while configuring are working fine. Please advice.

Hi,
You are getting the status as "Not cleared" which means that the payment has not yet been done.
Please do this by using the T.Code "F-28".
Goto the T.Code "F-28".
Enter the date,G/L account,Amount.Select the document number.
Click on "Process open items".
Enter your document number.Ensure that the not assigned is equal to "0".
Click on Simulate.
Save.
Before doing this goto the T.Code "FBL5n".
Click on "open items".Your sales order will be displayed in open items.
When you pay this amount it will be displayed in "Cleared items".
Simultaneously,the status will be changed.
Regards,
Krishna.

In Message Monitoring Message showing holding status

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
Holding
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

Hi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you

Mail to File Integration(Mail Sender Communication channel status RED)

Hi all,
I am doing Email to File Integration Scenario, XI is reading mails from an particular exchange server mail id & putting it in to a file. now all IR & ID configuration is done.
But in RuntimeW Bench -> Adapter Monitreing The Sender Mail Communication Channel is RED with error occured: exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 00KC NO The requested item could not be found

We check the Exchange Server login Acess through TELNET ,as suggested from SAP Service marketplace
and login is successfull, with details available of Inbox
but in TENET when we try to execute the IMAP Status command error message comes
" expected space not found" .
Since XI is not able to read the inbox mail, so Sxmb_moni is blank.....
can any body suggest that this issus is related to that IMAP Status..........or some thing else..
our URL is correct.
Regards,
Ashutosh

the URL path was wrong...
it should end with .......exchange/Inbox/
the sender channel was having error RED ,but it was showing green status intially because delay update .....
Regards
Ashutosh

GRMG Scenario Question

Hi, all
I have confousion about GRMG Scenario I am using XI30, and create 5 different GRMG Scenario, first I download GRMG File and customized and update Scenario using GRMG tcode
Now its look like this and all Scenario are green-check-sign:
Name                Type of GRMG                                             RFC
=========================================================
XI_SLD1            System Landscape Directory Heartbeat          XI_GRMG_SLD
XI_RWB1           XI Runtime Workbench Heartbeat                   XI_GRMG_RWB
XI_AF1               XI J2EE Adapter Engine [hostname]               XI_GRMG_AF
XI_DIR1              XI Directory Heartbeat                                   XI_GRMG_DIR
XI_REP              XI Repository Heartbeat                                 XI_GRMG_REP
My question is what is the utilization of thease Scenario ?
Where may I found out in RZ20 for these Scenario ?
How may I link to thase Scenario ? for Alerts
Please Advised
Thanks in Advanced

Hi, I have another question
When I goto RZ20 and click "Extras" then Activated maintaintance funcation" then documents said "CCMS monitor sets screen, copy the template SAP Exchange Infrastructure to the new monitor set.
OK then
Goto SAP "CCMS Monitor Template" then click "Exchange Infrastructure" then click "Copy to" then its open one window
from monitor set:   SAP CCMS Monitor Templates
Monitor: Exchange Infrastructure
To Monitor Set: (when i click dropdown menu list its show lot of monitor set) which monitor sould I select in there?
Monitor: (and what sould i put in this line ?)
Please tell me step by step will be appriciated
thanks

Workflow attached to content type shows the status as 'Starting'

Hi,
I have developed a workflow to distribute documents from Drop Off library to different SharePoint libraries based on the content type that the document uploaded to.
The drop off library has been configured incoming mail settings hence the documents would be on boarded to drop off library through e-mails. In this scenario, my workflow should be triggered when the document is on boarded through email.
Another scenario, the user can upload the document to different content type manually and updates the respective meta data values. This scenario, my workflow should be triggered when the item updated.
So, I have configured my workflow should run on the content types and trigger when item is created through e-mail and item is updated by manual.
The document on boarded through e-mails are working fine as soon as the item is created.
Issue:
The workflow associated on a content type which needs to be triggered on item created is triggering as soon as the user uploads a document manually and shows the status as 'Starting'.
The workflow associated on a content type which needs to be triggered on item modified is triggering as soon as the user updating meta data values after document is uploaded. Hence, throwing an error
'cannot open a file from drop off' library exception when I try to read file using C# code as file stream bytes.
Configuration:
1. The content types are having mandatory fields which has a default values set.
2. The document version settings are set as check out the document when editing the properties.
Please help me to resolve this bug and let me know if you need more details.
Also, let me know how can we cancel the workflow if it is in 'starting' mode.
The workflow should run the document is onboardedwhen an item is created and

Hi,
According to your description, my understanding is that you want to get data from content type in JSlink.
I suggest you can get the content type data in JSLink using JavaScript Client Object Model.
Here are some derailed code demos for your reference:
http://sharepoint.aspcode.net/view/635399286724222582163436/sharepoint-how-to-get-field-value-using-jsom-jslink-without-async-call
http://sharepoint.stackexchange.com/questions/93777/how-to-get-contenttype-name-in-clientsidejavascript-jquery-csom-etc-in-editf
Best Regards
Zhengyu Guo
TechNet Community Support

Showing Holding Status in RWB

Hi Friends
I am stuck up in this problem have gone through the blogs but of no use...
Actually I am working on a Idoc to File scenario and sometime before a scenario which was working fine stop working after a small change in the mapping.
I am unable to get the file in my target system even though there is no error in the IR and ID .
In the RWB it is showing me no error but the component Monitoring is showing the status as "HOLDING"
I have removed the messages with status system error and now there are only 2 types of status one is HOLDING and another is SUCCESSFUL.
Any help would be surely rewrded with points.
Thanks and Regards

Hi,
Actually the problem is not in XI side, it is at receiver end.
Possible cause of holding status.
1. If you are sending a text file then check your FCC parameters. As you said it was working fine, but after you made some changes in mapping and form then it is not working.
Check if you have added or removed any field in mapping the FCC will change accordingly.
2. It may happen that Receiving System is not available/up. Plz chk this too.
Regards,
Sarvesh

HT4211 I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

Data Package 1 ( 0 Data Records ) at DTP with Status RED

Hi All,
For 0 records at DTP level it is showing Overall status & Technical status as RED and yellow beside Data Package 1 ( 0 Data Records ). There is no short dump no error message. At PSA level in status tab the message displayed is Status 8 which says no data on R3 side for this particular load. Help me out.
Regards,
Krishna.

Hi,
if traffic light is not highlighted, you are probably running a delta.
You will have to set the traffic light in the according init.
(and run init again )
the setting in the delta will be the same.
Udo

CCMS Status red

hi ,
Integration engine is in status red in component monitoring .I tried a self test and the CCMS status is red.
I cleared all the alerts in CCMS and repeated selft test.Even then the integration engine is in red and the CCMS too.
Anybody please help to resolve the issue.
Thnks,
Am

Hi,
The alerts contain a status indicator with a color and a numerical value. Yellow means a warning, red means a problem, and the numerical value shows the severity of the reported error.
You can configure the CCMS alert :
RZ20>>activate maintenance mode>>>Monitor >>create
create a new monitor by copying an SAP monitor
change the rules to include all systems
select your new monitor >>change>>select node ccms_define_r3_system, Edit>>change and change the parameter values for systems
enablee remote monitoring in RZ21
create a peoperties variant and activate it.
go back i RZ20 and assign methods
you can also define auto reaction method to enable emails in case of alerts. and assign method to a node...
Also check:
http://help.sap.com/saphelp_nw04/helpdata/en/0c/e65b3b18debb64e10000000a11402f/frameset.htm
regards,
Jyoti

Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts?

Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts possibly. The previous help has been appreciated but the problem persists.

Hi,
Try iMessaging your own iPhone and see if your account is actually logged in.
It can appear "enabled" and On line but sometimes it is not.
Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
If it does not use the Sign Out button.
Then shut down the Mac
On restart add back the Apple ID to the iMessages account settings.
I also just checked My wife's iPhone as she popped up red.
It turned out her iPhone did not have Messages On.
10:00 pm Tuesday; January 28, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

How to show network status in top toolbar?

how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?

Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards

XI GRMG Scenarios showing Runtime status Red

Similar Messages

Maybe you are looking for