Showing Holding Status in RWB

Hi Friends
I am stuck up in this problem have gone through the blogs but of no use...
Actually I am working on a Idoc to File scenario and sometime before a scenario which was working fine stop working after a small change in the mapping.
I am unable to get the file in my target system even though there is no error in the IR and ID .
In the RWB it is showing me no error but the component Monitoring is showing the status as "HOLDING"
I have removed the messages with status system error and now there are only 2 types of status one is HOLDING and another is SUCCESSFUL.
Any help would be surely rewrded with points.
Thanks and Regards

Hi,
Actually the problem is not in XI side, it is at receiver end.
Possible cause of holding status.
1. If you are sending a text file then check your FCC parameters. As you said it was working fine, but after you made some changes in mapping and form then it is not working.
Check if you have added or removed any field in mapping the FCC will change accordingly.
2. It may happen that Receiving System is not available/up. Plz chk this too.
Regards,
Sarvesh

Similar Messages

In Message Monitoring Message showing holding status

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

Hi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you

Business Process Engine is showing Red Led in RWB

Hello to All, I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB.
When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report". Please let me know if any one has the solution with details.
I gone thru the link in SDN, but no resolution yet.
Re: Business Process Engine is showing Red Led in RWB
thanks, Srini

Hi Mark, All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
In RWB, component monitoring --> Display -- Business process engine is RED with message as
"Schedule background job for clearing report" in Yellow.
I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
Please let me know how can i make BPE green.
thanks, Srini
Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

Messages in HOLDing status

Hi Gurus,
I have a problem with messages in XI. Some of them are in a HOLD status, some work fine. There is no reason why they should be in a HOLD status. I've checked SMQ1, SMQ2 - all clear.
Is there I can do
a, process these messages (they are now in AE waiting to be written in target file)
b, to avoid this HOLD status in future
Thank you,
Olian

Hi,
In RWB -
> Message Monitoring.
Check the interface here and see what is the cause of HOLD.
if you are using FCC in you CC then may be one/more fields having problem due to incorrect data.
Also chekc RWB -
> Component Monitoring (look at receiving CC)
Regards,
Sarvesh

Adapter Engine Holding Status

Hi,
I am working on an automation of XI message monitoring which includes checking the Adapater engine Holding count.
From where can I fetch the number of messages with HOLDING status.
Regards,
Karthik

Hi,
Just go to Run Time workbench (RWB) from your Integration Builder and then click on message monitoring --> then select the Database from dropdwon box ---> then from filter option "Status" select the "Holding" and press the start button and you will get your restult.
Regards,
Sarvesh

HT4211 I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

Hold status

Hi,
We are sending the file through outbound file adapter, in message monitoring it is showing as 'HOLD' status.
We don't have BPM in this case.
Can anybody guide me to debug this.
Thanks & Regards
Katta Mohan Reddy

Hi Katta,
did you try to restart the message?
what happens then?
you can also take a look at Stefan's previous response:
Re: Holding status in Adapter Framework
he gave a few notes you can check
you can also check this PAG
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
which deals with different statues of messages in AF
Regards,
michal

Messages in "holding "status in Adapter engine

Hi All
We have a problem with the messages being stuck in " Holding " status
We have resent the payloads for these messages,
Although these messages have been manually processed,
1) Messages went into holding status and are still remaining with the same status
2) What we need to do to get rid of message ie. cancel, delete etc.
Please dont send links, A solution will be appreciated
Kindly help

Rajeev
I followed this
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
and the messages did get cleared
However on the date it got stuck to the Holding state
it is still showing so .
and am unable to get rid of the same status for these messages for that date .. even tried a cache refresh but doesnt help
kindly suggest
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework

Alert for XI messages in a Holding status

Is there a way to trigger an alert in XI 3.0 sp20 for messages that are in a holding status. Right now I am manually checking using the RWB but I would like to trigger an alert if messages are holding for an extended period of time. I have setup Email alerts for messages that have an error status but I can't seem to find out how to setup for messages that are holding.

You can either configure CCMS alerts or using ALRTCATDEF. YOu can refer to the below links.
CCMS:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Michal's blog-ALRTCATDEF:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Other help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8fe69590-0201-0010-8097-c8a2ca60d5df
Venkat.

BLF stopped showing activity status

I have two different locations having this same issue. The BLF key will stop showing the status of the other but, after a reset of the effected device it works.... only to have the problem roll to another phone in that same call pick up group. The BLFs work as speed dials. Only the flashing to show status has stopped. If the user unplugs the phone or if we perform a RESET of the phone, the flashing returns. It continues to roll through the entire group.
What registration is upon the reboot/restart of these devices? How do I isolate this problem?
[CUCM8.6.2.23075-1]

8000 phones means that there is probably more than a CUCM. CUPS, a switchboard, shared lines, Lync or Jabber,... all subscribe to the status. A short network outage or a failover of many phones can cause problems. We observed this many times in the past years. Sometimes lines are busy but no one is using the line, after a reset everything works normal an a few days another line is affected. A phone is ringing and as soon as you lift the receiver the other party is put on hold. ...
A restart of all CTI Manager services solved the problem, otherwise reboot the cluster.

Account Holder Status.

Over a period of weeks I have been trying to have my BT profile granted Account Holder status. To do so requires a 4-digit PIN. For security reasons these are sent out by snail mail, taking up to a week for each PIN. I have had seven PINs over a period of 5+ weeks, none of which has worked. Last week I received three PIN letters in two days. BT staff do not seem to know what they are doing and I was told by one supervisor that the PIN system is a shambles, which I can certainly confirm. I need to achieve account holder status in order to get access to My Extras, including BT Wi-Fi and BT Mail. I am surprised to find no reference to this problem in the forum. Are there any more fellow-sufferers out there?
My Extras shows the following error message:
"We can’t retrieve your Extras, either because you have a calling plan or a broadband service in this account or because you are not the account holder. Please let us know if you do have a calling plan or broadband service in this account and you are th..., so we can amend your profile."
Selecting the link takes you to a form relating to faulty hardware and has nothing to do with account holder status or PINs.

I tried to edit my last message, but ran out of time. It is no longer relevant in the light of what I have been trying tonight.
My problem is becoming more clearly defined and it would appear that the reason I have no access to BT Wi-Fi and BT Mail is because I do not have a BT ID based on a BT Mail address.
After writing the last message I remembered that I had not installed the BT Wi-Fi app on my new Samsung Galaxy Tab 3 so I have just done so and the app will not accept my current BT ID (which is my Mail.com email address) and password. The error message says I must be a BT Broadband customer. Reading the BT requirements again it would appear that I cannot have BT Wi-Fi unless I have as an ID a BT Mail or BT Yahoo! Mail address. The latter was deactivated by BT at my request. The fact that BT Wi-Fi is still running on my Galaxy S2 smartphone must be a hangover from my original ID based on my deactivated (or in the queue for deactivation) "*@btinternet" address.
For the record the BT ID based on my Mail.com address was set up by a BT staff member during a telephone conversation and she also suggested the password, which I am still using. Is that not a clue to the resolution of this problem? Let me have a new BT Mail address which I can use as my ID and everything will drop into place. Ha!
As an aside, I installed the BT Cloud Extra on my desktop PC and Galaxy Tab tonight. I used my Mail.com address, and it was accepted no bother at all.

Msgs are going to holding status

Hi All,
I have scenario from 1 file to 2 files(1 input & 2 outputs), but for some messages, 1 output is successful and other one is showing "waiting"status in message monitoring. For my scenarion QOS is EOIO.
There is no error msg in the queue for this interface. I tried to cancel or resend those messages, but I got the error - "Unable to cancel 1 of 1 messages; update the status" whn try to cancel & "Unable to schedule 1 of 1 messages for processing; update the status" whn try to resend.
I want to make these msgs either cancel or successful, otherwise if I send any msg for the same interface that is going to "holding" status.
Any help on this will be appreciated greatly.
Thanx,
Kumar.

Hi Guys,
Thanx all for ur replies.
I cleared all queues frm smq2 and then processed but still msgs are going to same status and showing the queues again in smq2.
These queues are getting processed if i select the queue and click on active and then refresh.
Everytime we cann't do this.
Could anyone tell me wht could be problem?
Thanx,
Kumar

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

How do I post an Invoice with 'on hold' status using this BAPI?

Hey everyone,
Okay, I'm working on an interface that will take Incoming Invoice information we receive from vendors and post it into the SAP system. I'm still relatively new to ABAP, so it's a little slow-going for me...
The BAPI is IncomingInvoice. What we want to do is try to post the Incoming Invoice using the CreateFromData method. That part, I'm clear on. However, if there are any problems, the client wants us to post it with a status of 'on hold.'
I'm been doing a lot of searching and a lot of BAPI documentation reading, but I'm not finding the answer. I thought at first I could use the Change method, but it looks like I have to have an Invoice already out there in a particular status. So if the CreateFromData somehow fails and doesn't really post an Invoice, then I think using the Change method is pointless.
I thought the answer was to use the PreliminaryPostSingle method, as the documentation states that "enables you to post provisional invoice documents. Provisional invoice documents have the status 'on hold', 'on hold (from parking)', 'parked', 'parked as complete' or 'parked and released'." But here's the kicker -- it expects IMPORT parameters of the INVOICEDOCNUMBER and FISCALYEAR. But I don't have those yet, right? Why does the method tell me it can post documents with this kind of status, but it expects me to provide key fields to an Invoice that doesn't yet exist, doesn't have a field that lets me set the status, and only returns the standard "return" table?
I'm pulling my hair out on this one, guys. I'm really hoping someone out there can help out. As always, helpful posts will be duly rewarded with points. Thanks everyone!

Vyerah, sorry for the delay in the reply, but we only recently decided how to approach this. Due to further discussions about the criteria, it was decided that we wouldn't worry about the "on hold" -- if we try to post an Incoming Invoice and it fails, then it'll be reported as such in an output file.
Certainly made my life easier, as I thought I was going to have to clone the BAPI and try to get it so that it posted with an "on hold" status. I'm very, very surprised to see that, apparently, SAP doesn't provide a function or BAPI to allow you to post an Invoice as "on hold." Oh well.
Anyway, I wanted to give you the update. Thanks again!

How to show network status in top toolbar?

how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

Showing Holding Status in RWB

Similar Messages

Maybe you are looking for