XI Mail Alerts - problem
Hi all!
I created XI Alerts, which send e-mail when error occurs. Everything working fine but i have one problem.
I created scenario - ERP to File. For my tests I change target directory (to not existing on server) in File Receiver communication channel configuration. I get error email from XI server, and this is OK. But I get this e-mail every 5 minuts over and over until I fix up communication channel. When I fix channel up, everything is OK (mail is not send). I want to get only one e-mail message when error occurs.
Plesae tell me where I can configure that. Thanks
Normally
That can be achieved by configuring different "Alert Configuration".
But am not sure whether if "Alert Configuration 1" is given "Supress" Checked on"
Wonot allow other "Alert Configuration 2 & 3".
What u get if u create seperate "Alert Config" and check that option.
i suspect u will not get other messages whether if that is from different Message id. Unless u r first message is read.
This functionlity of RWB seems to be set back.
Any views
lemme me know miko what is u r output.
rdgs
srini
Similar Messages
-
Hi
we get alerts when there are rouge aps or ad hoc neterks. Problem is when the ssid is not broadcasted, in the wlse there is just /x/X os something like that instead of a ssid.
when i get an email from the wlse and the ssid is seen then its correct:
Subject: 020cf1f918b6[020cf1f918b6] P2 notification. FaultId : 145.
Unknown Station IBSSNetwork is: IBSSDetected. Ad-hoc network creation
detected: CMS
FaultId: 145
DeviceId: 3210
DeviceIP: 020cf1f918b6
DeviceName: 020cf1f918b6
MO: Unknown Station
Change: Ad-hoc network creation detected: CMS
ChangeSeverity: P2
StateChange: IBSSNetwork is IBSSDetected
AlarmState: Active
OverallSeverity: P2
DeviceType: L2Device
but when the ssid is not broadcasted:
Subject: 020cf1e8e5a8[020cf1e8e5a8] P2 notification. FaultId : 135.
Unknown Station IBSSNetwork is: IBSSDetected. Ad-hoc network creation
detected:
Mime-Version: 1.0
Content-Type: multipart/mixed;
boundary="29647319.1129639614015.JavaMail.casuser@wlse"
--29647319.1129639614015.JavaMail.casuser@wlse
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
FaultId: 135
DeviceId: 3067
DeviceIP: 020cf1e8e5a8
DeviceName: 020cf1e8e5a8
MO: Unknown Station
Change: Ad-hoc network creation detected:
ChangeSeverity: P2
StateChange: IBSSNetwork is IBSSDetected
AlarmState: Active
OverallSeverity: P2
DeviceType: L2Device
EstimatedLocation: Location could not be determined. Device was reported by client stations only.
--29647319.1129639614015.JavaMail.casuser@wlse--
so the mail get junked. is there a workaround that the email looks correct?
regardsI am not sure what Version of WLSE you are running, but I would recommend updating to 2.12.
-
The real problem with Mail alerts in 10.5?
The one change I have noticed between Mail in 10.4 and Mail in 10.5 is that the New Mail Alert sound now plays through the wrong device.
In System Preferences you can set two separate devices (and volumes levels) for Alert Sounds and other sounds.
The new Mail sends the New Mail Alert sound to the ordinary sound output device. If this is set to volume zero the effect is that Alerts from other programs work normally but Mail is mute.
I have Alert Sounds set to play through the built-in speakers and Sound Output set to play (through an iMic USB sound device) to a sound system. The sound system is used to listen to music etc. and is switched off when not in use. That is why I want alerts to use the built-in speakers.
I am trying to get round this using the hack involving afplay. My problem is that I can't find the allowable values for the AUDIODEVICENAME argument to afplay. Anybody know? Please? Has some kind soul got five minutes to spare and Inside The Mac?The problem still exists in 10.5.8.
-
Sync issues with Google Calendar and e-mail alerts
Hello,
I'm experiencing a lot of problems with iCal while I'm trying to sync it with Google Calendar. I have correctly inserted my Google account information into iCal, but:
when I create a new event and I disable the e-mail alert and save it, it automatically turns on the e-mail alert! Is there a way to disable by default all alerts? I have already tried to go to Settings - Advanced and select “Disable all alerts” with no result;
all the events I create into iCal are correctly synced with Google Calendar and I can correctly read them on the web app, but in my android device they don't have the time information (they are listed as all-day events)GooSync would do the trick - http://www.goosync.com/
Plz be aware that Goosync nor Google Contacts supports all field from your phone so it is not an 100% backup unfortunately
JoranG -
E-mail alerts not working properly
I have a problem with my Tour which has put me in some awkward situations- like in court and work meeting- not good.
The e-mail alert makes an audible noise even when the setting is programmed for silent. My original Tour worked fine at first, and after about 3 weeks the problem appeared. Verizon replaced the phone and now the replacement worked fine at first and is now messing up after about 3 weeks.
I need a fix for this problem. I saw someone else described the same problem on the Storm forum. It appears it might be a software issue."Normal" is what you set it to be (with or without email alerts, etc). Loud and Silent should be evident as well.
I still think you have some setting to override the silent profile for something.
If you look at the Silent profile and check the email settings for volume, etc., everything is set to off or mute or whatever would be appropiriate for "silent'?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
E-mail alert for sales managers.
Dear all,
We are using SAP CRM 6.0. I was configuring e-mail alert for the managers whenever a transaction is created in crm. The mail is delvering but iam not able to send the object id and transaction category. Please help.I have the same problem!
I bought this phone specifically for this feature and I can't for the life of me get any alert for my Yahoo mail account.
I've downloaded the Yahoo App from the Nokia store and have checked the "activate e-mail alerts" box and that doesn't work.
I've logged into my Yahoo account and tried to connect it that way but there are no options to do so.
I've followed the link on the Yahoo site where they have sent a link to me via text to sync it that way and no joy.
Aaahhhh, its driving me crazy!!!!!
Please help!!!!!!! -
Script to send a mail alert whenever server boot
hi,
I need a shell or perl script to send a mail alert to user whenever server boot, restart and shutdown.because in my office power problem is there.So the server restarted intermediatly.Kindly any one give a script to rectify my problem.If the server isat all important and you have a power problem, do consider getting a UPS. It might recover OK most times from power cuts (especially if you're on ZFS), but if you get other power problems like brown-outs and spikes, you might one day regret leaving it connected to a bad mains feed. Choose a mainstream brand like APC to be sure of Solaris support. The line-interactive versions, e.g. SmartUPS will recondition the mains waveform as well as maintaining supply during a power cut.
-
Alert Problem. Pls advice
Hi Aall,
I have made one alert Category.
Initially Wwhen I do not check -- Suppress Multiple Alerts of This Rule every time I was getting alert.
But as I want one alert I check that box I am not getting any alert.
Pls advice urgent
Regardshi
here give you some blogs and Docs about alerts
apply the better for you
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Thanks
Rodrigo -
Sending e-mail alerts in Microsoft Project 2010
I'm using Microsoft Project 2010 in creating my project. While adding my tasks I want to be able to send an e-mail alert to my resources indicating a task is coming up or the task is overdue. What do I have to do?
Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a> -
Mail alert sounds too loud; preferences ignored
After I upgraded to Leopard, suddenly the alert sounds in Mail were way too loud. I double-checked my "Alert volume" setting in the Sound preferences and it was set low. Other system sounds are played at an appropriate level. Only Mail ignores it. It seems that no matter what my system volume is set to, Mail alerts are played at 100% volume.
I found this old thread on the same topic, and am wondering if there is any fix for this problem yet?
http://discussions.apple.com/message.jspa?messageID=7058243
Since I have been unable to find any reference to a fix from Apple, and I am sick of about jumping out of my skin when I am concentrating on work and a new message comes in... here is a hack that I did today that might help others: I located each sound file Mail uses (I have several that are used in my Rules), opened each in Audacity ( http://audacity.sourceforge.net/ ), adjusted each to -15db, and saved a copy of the files. I then assigned the "new mail" sound to use the quieter copy. Each rule also had to be edited to attach to the new files.
It's a hack, and time-consuming, but it seems to work.
Message was edited by: PeakDSame issue here. Been looking for a fix. . .
-
How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari -
Nokia Messaging 6303i classic - no e-mail alerts
Hi all,
I have a problem with Nokia Messaging on my new phone - Nokia 6303i classic. The problem is that I can't enable the e-mail alert option - when I tick the "Alert me for new e-mail" option, it says "E-mail alerts not available. Alerts option ot available". My e-mail account is in Gmail. My service provider (VIVACOM, Bulgaria) says that they support Nokia Messaging and that it's up to some settings (which they apparently can't figure out!). I have all the necessary settings to access the internet and the phone browser works great; Nokia Messaging also works - connects to my Gmail account, receives messages, the only problem is with new e-mail alerts.
I know 6303i doesn't support multitasking - could the problem be related to this (e-mail client unable to run in the background)?
I used a Nokia 2330 before and it had a native e-mail client with far more capabilities - no problem with e-mail alerts, could edit (copy/paste) received e-mail body text (a very useful function which lacks in Nokia Messaging!) - can I get that on my 6303i instead of Nokia Messaging?
Phone firmware version: V10.80/21-01-11/RM-638
Nokia Messaging version: 1.3.49
Any help would be appreciated.
Regards,
N. Y.I recieved an update from Nokia support center. For everyone wondering, here's the deal, as far as I get it 6303i comes with embedded Nokia messaging application instead of the usual s40 native e-mail client; that's why there's no e-mail alert tone option in the profiles' settings. However, when you try to enable e-mail alerts from inside the Nokia Messagign application, you get an error message stating that this option is unavailable. What I could make out is that, as s40 doesn't support multitasking, Nokia Messaging can't be left running in the background and therefore can't alert you on new e-mails. As I see it, it's a design failure.
Nokia, if you couldn't make Nokia Messaging e-mail alerts work in s40, why didn't you just leave the good old native e-mail client, for crying out loud???!!!
Regards,
N. Y. -
Powershell workflow generating false e-mail alerts
Hi,
I have a powershell script that gathers all of the trusted domains in our environment and then sends each domain name to another script to time the amount of time it takes to receive a response to an unqualified (isolated) name query in AD.
Script 1 code:
#Load the Active Directory Module
Import-module activedirectory
#Search the local schema for all trusted domain objects
$ADDomainTrust = Get-ADObject -Filter {ObjectClass -eq "trustedDomain"} -Properties * | Sort-Object cn
#Define workflow to pass domain names to trustsearch script
workflow Get-domains
param( $trusteddomainlist)
foreach -parallel ($trusteddomain in $trusteddomainlist)
$trust = $trusteddomain.name
InlineScript {C:\trustsearch.ps1 $using:trust}
Get-domains -trusteddomainlist $ADDomainTrust
As you can see, I'm using a "foreach -parallel" workflow to query each trusted domain simultaneously. This is done to alert us to a potential problem as quickly as possible, without having to wait for the entire script to finish.
Here's the code for the second (isolated name query) script. It sends me an e-mail if the query takes over 60 seconds.
Script #2 code:
$trust=$args[0]
foreach($domain in $trust){
$startDTM = (get-date)
$objUser = New-Object System.Security.Principal.NTAccount("junk")
$strSID = $objUser.Translate([System.Security.Principal.SecurityIdentifier])
$strSID.Value
$endDTM = (get-date)
$totaltime = (($endDTM-$startDTM).TotalSeconds)
$ftotaltime = "{0:N2}" -f $totaltime
Function SendMail
#SMTP server name
$smtpServer = "<SMTP server IP address>"
#Creating a Mail object
$msg = new-object Net.Mail.MailMessage
#Creating SMTP server object
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
#Email structure
$msg.From = "<sender e-mail address>"
$msg.ReplyTo = "<reply e-mail address>"
$msg.To.Add("<recipient e-mail address>"
$msg.subject = "Isolated Name monitor warning"
$msg.body = @"
Isolated name queries are running slowly. A script measures how long the NAMCK domain controllers take to resolve an unqualified name query. It usually takes no more than 60 seconds to execute. It is currently taking $ftotaltime seconds.
This may indicate a trust issue or a problem with a downstream trusted domain.
#Sending email
$smtp.Send($msg)
If ($ftotaltime -gt "60.00")
SendMail
Unfortunately, I'm getting a lot of false positives....e-mail alerts when query responses are taking only 7 or 8 seconds, not just over 60. It seems to happen most during the first 2 or 3 minutes the script runs. I think it has something to do with it running
in parallel, because when I remove the "foreach -parallel" functionality, I don't get any false positives.
Does anyone have suggestions on how to cut down or even eliminate the false positives without removing the "foreach -parallel" functionality?
Thanks.I think the problem is here:
If ($ftotaltime -gt "60.00")
You're doing a string comparison, when you need to be doing a numeric comparison:
If (60.00 -lt $ftotaltime)
Here:
$ftotaltime = "{0:N2}" -f $totaltime
you're uisng the string format operator (-f) which is going to produce a string. String comparisons of numbers won't produce the expected results:
PS C:\> "9.00" -gt "60.00"
True
Using the numeric double value 60.00 (instead of the string value "60.00"), and putting it on the LH side of the comparison will cause $ftotaltime to be coerced to a double, and you should get the expected results.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " " -
ID 801593 mail.alert ... savemail panic
Hi everyone,
I find these messages from syslog:
Jun 21 14:18:59 isengard named[178]: [ID 295310 daemon.warning] check_hints: A records for L.ROOT-SERVERS.NET class 1 do not match hint records
Jun 25 20:40:47 isengard sendmail[5125]: [ID 801593 mail.alert] m5PIej3E005125: Losing ./qfm5PIej3E005125: savemail panic
Jun 25 20:40:47 isengard sendmail[5125]: [ID 801593 mail.crit] m5PIej3E005125: SYSERR(root): savemail: cannot save rejected email anywhere
Jun 26 01:19:35 isengard sendmail[6133]: [ID 801593 mail.alert] m5PNJTfG006133: Losing ./qfm5PNJTfG006133: savemail panic
Jun 26 01:19:35 isengard sendmail[6133]: [ID 801593 mail.crit] m5PNJTfG006133: SYSERR(root): savemail: cannot save rejected email anywhere
Jun 26 02:30:05 isengard sendmail[6430]: [ID 801593 mail.alert] m5Q0U3Qj006430: Losing ./qfm5Q0U3Qj006430: savemail panic
Jun 26 02:30:05 isengard sendmail[6430]: [ID 801593 mail.crit] m5Q0U3Qj006430: SYSERR(root): savemail: cannot save rejected email anywhere
Jun 26 02:30:05 isengard sendmail[6435]: [ID 801593 mail.alert] m5Q0U3CY006435: Losing ./qfm5Q0U3CY006435: savemail panic
They start from Jun 21 and continue at this time.
It's very starnge because nothing was changed, any patch or software upgrade, simply they appear as above.
Anyone can help me find explanation and possibly solve this problem eliminating messages?
Thanks
VoxHi,
I think that this was the point Jay was trying to make. Sendmail is usually installed by default on Solaris based systems.
Chances are a program/script attempted to use the sendmail program to send an outgoing email and for some reason this caused an error which was reported in the logs.
You can send an email using this program using the following:
/usr/lib/sendmail <some address>
<Contents of email>
There doesn't have to be a sendmail daemon for sendmail to run as a program.
Either way, it isn't a problem with JES.
Cheers,
Shane. -
Why are there no sounds located in the Library/Sounds folder in my Home Directory? Since upgrading to Mountain Lion most of my sounds are not working, in my Mail alerts, etc.
Did you put any sound files there? Because if you didn't, that will explain why it's empty.
The ~/Library/Sounds folder is where any sound files that you add go, and they are only available to you as the "logged in" user (if you have other users with their own accounts, they each have their own ~/Library/Sounds folder). Apple doesn't put anything there.
The sounds that come with Mac OS X will either be in the /Library/Sounds folder (which is the shared location for all users) or the /System/Library/Sounds folder (don't mess around with anything in the /System folder!).
But I doubt your problem has anything to do with the sound files. Try deleting your sound preferences file, or even just clicking around in the Sound system preferences until they start working again (seriously - I had one Mac that had some audio problems after upgrading, and just turning things off and on a few times eventually worked. It seemed somehow tied to Dictation, so try twiddling those settings too).
Maybe you are looking for
-
Merging of multiple rows in an internal table as a single record
Hi All, I have an internal table which has the following columns: text, date, time, user. it stores notes in the internal table. The problem is...when I save a note with multiple lines and spaces it saves each line of the note as a row in the interna
-
HTTP 403 ERROR IN SXMB_MONI
Hello Experts, My interface is JDBC to ABAP PROXY in DEV it is workin fine in QUAL in SXMB_MONI it is throwing HTTP Error Error while sending by HTTP (error code: 403 ,error text: Forbidden) (See attachment HTMLError for details) . if i open the mes
-
Max value without using max() function
Hi Is there any way to get the max value from a table without using MAX() function Thanks
-
Finding out in which albums I put my photo
Library getting bigger and bigger. To me it would be very useful sometimes to find out in which album a certain foto has been included, already. I tend to forget. Since there is a database concept behind iphoto this should be easy. But how? Any clue?
-
I use excel at work. Should I use Numbers or buy Office for Mac?
I use simple spreadsheets that I change the values in daily. My main concern is compatibility. I use a Macbook Air mid 2013.