Xi message flow error
Hi support
we r getting an error which was mention below
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_I_ORDERS05_to_A_V4010_856_MM_:
RuntimeException in Message-Mapping transformatio~
Is this error related to administrator or developer, please specify
Can any one help to slove this error,
Ram
This looks like Message Mapping Error
There went something Wrong with the Message MApping or you check the Following.
1) If your Message Mapping uses LookUps , check if the LookUp channels are Active ?
2) Check if the Credentials used are valid?
3) If UDF is used , check if the UDF does not have runtime errors.
4) check if the target XML structure has the occurance with atleast 1 and from source it is not getting anything
Regards.
Jeet.
Similar Messages
-
BDOC message flow and its architecture
Hi Expert,
It can be a simple question but i have a doubt regarding the flow of messages using SAP CRM middleware.
The scenario is like:
1. Message flows from ECC to CRM through a BDoc. (It can be opposite way also)
2. The BDoc fails in CRM due to some data issue.
3. A BDoc message id is generated.
4.Now the data is corrected in ECC and initial load was triggered.
5.The messages are flowing correctly.
So my doubt is:
1.What will happen to the old BDoc?
2. Do the initial or delta load processes the messages with new BDoc ID or through the old BDoc ID?
3. If the messages are processed through new BDoc id, can the old BDocs be deleted?
Please help me understand this concepts of BDocs and please provide me to some study material to get more undertsanding of the BDOC message flow architecture.
thanks,
VickyHello Vicky,
i think I understand exactly what your confusion is all about.
1.What will happen to the old BDoc?
The old Bdoc will remain in error state until it is archived or set to processed state.
2. Do the initial or delta load processes the messages with new BDoc ID or through the old BDoc ID?
It will be a separate BDoc with a new BDocId. If you get an Error in SMW01 this is beyond the queueing, so later Messages will not get queued behind your faulty bdoc. They will also not "update" your BDoc in any way. Later BDocs will Bypass a bdoc in error state and update your object in CRM if the error in data has been solved in ERP before. If the data error is not corrected, you will get a second failed bdoc.
3. If the messages are processed through new BDoc id, can the old BDocs be deleted?
Best practise for the Bdoc with error would be to set it to processed state. That way there is no way that Bdoc can be processed afterwards. The BDoc will then be archived with the next run.
Best regards,
Lutz -
Hi all
I created a idoc to abap proxy for the xi adapter i used http destination with my destination defined in sm59.
In sxbm_moni i get the error:
LOOP_IN_MESSAGE_ROUTING
Loop in message flow found: system is.00.metsapxd, pipeline CENTRAL with inbound adapter XI already processed
Anyone know how to fix the error?
ThxHi,
I think your end business system i.e. where proxy exists -- this application system is configured as "integration engine/HUB". Try to keep it as (SXMB_ADM -> Integration engine configuration) type of business system as "applicaiton system" instead of integration engine/server.
Regards,
Rao.Mallikarjuna -
Where to find detail message flow in scenario of AQ to DB adapter?
I have installed hub, aq and DB adapter. The repository, adapters seem to be run fine. I put some messages in AQ and found out that there were no messages appeared in DB. The messages could be found in AQ_OUTBOUND_QUEUE. Sine there is no error message in adapter log files(trace is turned on), I am not sure it's the hub problem or adapter problems. Where should i check the message flow so to decide the problem?
Any constructive advice is welcome.Hi Johnson,
Have you set the queue to the event in the deploy tab of AQ application in iStudio? If not then please set your OUTBOUND_QUEUE to the corresponding event and then do push metadata after starting the adapter. You can have a look at "Appendix A -> Deployment -> Setting Queues" of Interconnect User guide for this.
regards,
Sandeep -
Message flow from XI To Receiver
Hi ,
There are several IDOC to JDBC scenarios running in our XI PRD server but now all the IDOCs are reaching XI,which is visible in IDX5 or SXMB_MONI but nothing has reached the Receiver as visible from Message monitoring.
In SXMB_MONI , i can see the errors CLIENT RECEIVE FAILED.pls figure out the problem and tell me how to proceed wid.
Thanx,
Laawanyahi
as you are doing idoc-jdbc scenario check whether the reciver MT you maintained is of JDBC-XML structure
check Document Formats for Receiver JDBC adapter
check the blog for the message flow in xi:
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k -
OSB:Publish to business service with for each in osb proxy message flow
Hi,
I have an external application that will make a call to my web-service and post a message to my queue "A" and i need to model my osb component such that it picks the message from that queue " A"and posts it to another queue "B". All this is done without any BPEL involved.
for publishing the message i have created a business service that publishes a msg to the queue A and my proxy service is modelled such that it subscribes to this same queue A and publishes the msg to another business service (that posts it to a queue B).
Everything is working fine but i have an issue in modelling my proxy message flow. If an external application sends a bulk msg i need to post the message one by one to my queue B. I have used for-each and Publish to BS but the msg doesn't get posted one by one. i know i am missing something please help me out.
SOA Suite Version - 11.1.1.3Are you sure that your for-each definition is correct? Does the flow within the for-each get executed multiple times?
You can check this by logging the variable to which you assign the message in the for-each. Don't forget to put the log level to Error, so you're sure that it's logged.
Let's say you get a list of persons like the following xml in a variable personList
<Persons>
<Person>Glenn</Person>
<Person>Prasanth</Person>
</Persons>
Your for-each definition should be the following.
For each variable: person
XPath: +./Person+
In Variable: personList
You don't mention the Persons element in the XPath expression since it is the root element of the XML. The root element is represented by . (dot).
In the for-each, the variable person can be used like any other variable. -
Hello,
as I read, WLS provides the possibility to slow down message producers when certain paging thresholds are exceeded. I'm not quite sure, if the slow down of a producer is tied to it's session lifecycle, i.e. if the producer is slowed down only within its current session - or are producers, which are created from a new session, also slowed down right from the start.
It would be great if someone could answer that. Unfortunately I have found nothing about that in the documentation.
Regards,
DirkHello Tom.
First of all, thank you for your quick response. This forum is really working!
I searched for this topic in the documentation, but didn't find anything appropriate explaining the in-depth details of the JMS flow control mechanism. Therefore, I wrote a simple test case (implementation and server configuration is attached at the end of this message) to check the flow control handling for certain conditions. Since there is no API to access the flow control properties of a message producer, I measured the JMS throughput within the test case and tried to derive some conclusions.
Regarding the server configuration:
- I configured one JMS Server (Test_JMSServer) with one Queue (TestQueue). I enabled the message paging at server level, starting at 1000 messages (i.e. message threshold high). The lower message threshold was set to 100 messages. As a paging store a file store (TestPagingStore) was used.
- Message thresholds at destination level was disabled.
- I further configured a connection factory (TestConnectionFactory) for which I enabled the flow control with a max. throughput of 50 msg/sec and a min. throughput of 1 msg/sec. The flow interval was set to 60 seconds, the number of steps was set to 6.
Regarding the test case:
There are 3 scenarios within the test case. Within each scenario
- first all messages are consumed from the queue,
- then 1000 messages are send to the queue in a row, thereby measuring the throughput,
- finally again 1000 messages are send to the queue in a row, thereby measuring the throughput.
The scenarios differ in how the bulk-send operation is performed.
- The first scenario (test_noReuse) creates a new connection for each message to be send.
- The second scenario (test_sessionReuse) creates a new session at the start and reuses that session for sending the messages. A new sender is created of each message.
- The third scenario (test_senderReuse) creates a new sender at the start and reuses that sender for sending the messages.
Here are the results of the test:
==[test_noReuse]=======================
Cleaned up <2000> messages.
Throughput (messages/second): 51 [startMillis=1161249409788;endMillis=1161249429210;messagesSend=1000]
Throughput (messages/second): 62 [startMillis=1161249429210;endMillis=1161249445304;messagesSend=1000]
==[test_sessionReuse]=======================
Cleaned up <2000> messages.
Throughput (messages/second): 231 [startMillis=1161249452773;endMillis=1161249457101;messagesSend=1000]
Throughput (messages/second): 245 [startMillis=1161249457101;endMillis=1161249461179;messagesSend=1000]
==[test_senderReuse]=======================
Cleaned up <2000> messages.
Throughput (messages/second): 790 [startMillis=1161249467351;endMillis=1161249468616;messagesSend=1000]
Throughput (messages/second): 1 [startMillis=1161249468616;endMillis=1161249999226;messagesSend=1000]
To me it seems, that reusing a session has no effect on the message flow control if a new sender is created for sending a message. The only scenario where a throttling occurs (at least it seems to be that way) is the last scenario, where the sender is reused for all messages.
So my conclusion is, that message control flow is superfluous to configure, as long as
- you don't have a small amount of (batch) message producers, each of which reusing a single sender for each message,
- or you have some cache of senders (or a single sender) in your application and reuse the cached senders for sending messages.
The latter is, of course, strongly discouraged, since neither JMS sessions, nor senders are thread-safe. So you need to implement some thread-safe cache and also have to deal with re-creating stalled JMS resources within that cache -- a really non-trivial implementation. Further, if many different threads produce messages, the flow control has no (or at least few) effect on the message load in the server.
I just ask myself, what the flow control was designed for, since the cases where it really applies are rather rare, IMHO. Or have I made some error in the test or in the server configuration?
Best regards,
Dirk
The test class:
<pre>
import java.util.Hashtable;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.Queue;
import javax.jms.QueueConnection;
import javax.jms.QueueConnectionFactory;
import javax.jms.QueueReceiver;
import javax.jms.QueueSender;
import javax.jms.QueueSession;
import javax.jms.Session;
import javax.naming.InitialContext;
import junit.framework.TestCase;
public class JMSFlowControlTest extends TestCase {
private int messagesThresholdHigh = 1000;
private QueueConnectionFactory conFactory;
private Queue queue = null;
protected void setUp() throws Exception {
super.setUp();
InitialContext ctx = null;
Hashtable ctxEnv = null;
ctxEnv = new Hashtable();
ctxEnv.put(
InitialContext.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ctxEnv.put(
InitialContext.PROVIDER_URL,
"t3://localhost:7001");
ctx = new InitialContext(ctxEnv);
this.queue = (Queue) ctx.lookup("jms/queue/TestQueue");
this.conFactory = (QueueConnectionFactory)
ctx.lookup("jms/factory/TestConnectionFactory");
public void test_noReuse() throws Exception {
System.out.println();
System.out.println("==[" + this.getName() + "]=======================");
this.cleanupQueue();
System.out.println(
this.bulkSendMessage(
this.messagesThresholdHigh,
1024));
System.out.println(
this.bulkSendMessage(
this.messagesThresholdHigh,
1024));
public void test_sessionReuse() throws Exception {
QueueConnection con = null;
QueueSession session = null;
System.out.println();
System.out.println("==[" + this.getName() + "]=======================");
try {
con = this.conFactory.createQueueConnection();
session =
con.createQueueSession(false, QueueSession.AUTO_ACKNOWLEDGE);
this.cleanupQueue();
System.out.println(
this.bulkSendMessage(
session,
this.messagesThresholdHigh,
1024));
System.out.println(
this.bulkSendMessage(
session,
this.messagesThresholdHigh,
1024));
} finally {
if (con != null) {
try {
con.close();
} catch (JMSException e) {}
public void test_senderReuse() throws Exception {
QueueConnection con = null;
QueueSession session = null;
QueueSender sender = null;
System.out.println();
System.out.println("==[" + this.getName() + "]=======================");
try {
con = this.conFactory.createQueueConnection();
session =
con.createQueueSession(false, QueueSession.AUTO_ACKNOWLEDGE);
sender = session.createSender(this.queue);
this.cleanupQueue();
System.out.println(
this.bulkSendMessage(
session,
sender,
this.messagesThresholdHigh,
1024));
System.out.println(
this.bulkSendMessage(
session,
sender,
this.messagesThresholdHigh,
1024));
} finally {
if (con != null) {
try {
con.close();
} catch (JMSException e) {}
private Throughput
bulkSendMessage(
int messagesToSend,
int messageSizeBytes)
throws Exception {
int messagesSend = 0;
long startMillis = 0L;
long endMillis = 0L;
QueueConnection con = null;
QueueSession session = null;
QueueSender sender = null;
startMillis = System.currentTimeMillis();
for (int i = 0; i < messagesToSend; i++) {
try {
con = this.conFactory.createQueueConnection();
session =
con.createQueueSession(false, QueueSession.AUTO_ACKNOWLEDGE);
sender = session.createSender(this.queue);
sender.send(this.createMessage(session, messageSizeBytes));
messagesSend++;
} finally {
if (con != null) {
try {
con.close();
} catch (JMSException e) {}
endMillis = System.currentTimeMillis();
return new Throughput(startMillis, endMillis, messagesSend);
private Throughput
bulkSendMessage(
QueueSession session,
int messagesToSend,
int messageSizeBytes)
throws Exception {
int messagesSend = 0;
long startMillis = 0L;
long endMillis = 0L;
QueueSender sender = null;
startMillis = System.currentTimeMillis();
for (int i = 0; i < messagesToSend; i++) {
sender = session.createSender(this.queue);
sender.send(this.createMessage(session, messageSizeBytes));
messagesSend++;
endMillis = System.currentTimeMillis();
return new Throughput(startMillis, endMillis, messagesSend);
private Throughput
bulkSendMessage(
QueueSession session,
QueueSender sender,
int messagesToSend,
int messageSizeBytes)
throws Exception {
int messagesSend = 0;
long startMillis = 0L;
long endMillis = 0L;
startMillis = System.currentTimeMillis();
for (int i = 0; i < messagesToSend; i++) {
sender.send(this.createMessage(session, messageSizeBytes));
messagesSend++;
endMillis = System.currentTimeMillis();
return new Throughput(startMillis, endMillis, messagesSend);
private Message
createMessage(
Session session,
int messageSizeBytes)
throws Exception {
BytesMessage message = null;
message = session.createBytesMessage();
message.writeBytes(new byte[messageSizeBytes]);
return message;
private void cleanupQueue() throws Exception {
QueueConnection con = null;
QueueSession session = null;
QueueReceiver receiver = null;
Message message = null;
int messageCount = 0;
try {
con = this.conFactory.createQueueConnection();
session =
con.createQueueSession(false, QueueSession.AUTO_ACKNOWLEDGE);
receiver = session.createReceiver(this.queue);
con.start();
do {
message = null;
message = receiver.receiveNoWait();
if (message != null) {
messageCount++;
} while (message != null);
} finally {
if (con != null) {
try {
con.close();
} catch (JMSException e) {}
System.out.println("Cleaned up <" + messageCount + "> messages.");
private static final class Throughput {
private final long startMillis;
private final long endMillis;
private final int messagesSend;
public Throughput(long startMillis, long endMillis, int messagesSend) {
this.startMillis = startMillis;
this.endMillis = endMillis;
this.messagesSend = messagesSend;
public int value() {
long timeElapsedMillis = 0L;
int timeElapsedSeconds = 0;
int value = 0;
timeElapsedMillis = this.endMillis - this.startMillis;
if (timeElapsedMillis == 0) {
timeElapsedMillis = 1;
value = (int) ((this.messagesSend * 1000L) / timeElapsedMillis);
return value;
public String toString() {
StringBuffer buffer = new StringBuffer();
buffer
.append("Throughput (messages/second): ").append(this.value())
.append(" [startMillis=").append(this.startMillis)
.append(";endMillis=").append(this.endMillis)
.append(";messagesSend=").append(this.messagesSend)
.append("]");
return buffer.toString();
</pre>
The (partial) server configuration:
<pre>
<JMSConnectionFactory
DefaultDeliveryMode="Non-Persistent"
FlowMaximum="50"
FlowMinimum="1"
FlowSteps="6"
JNDIName="jms/factory/TestConnectionFactory"
Name="TestConnection Factory"
Targets="SchufaDev"
XAConnectionFactoryEnabled="true"/>
<JMSFileStore Directory="filestore/paging" Name="TestPagingStore"/>
<JMSServer
MessagesPagingEnabled="true"
MessagesThresholdHigh="1000"
MessagesThresholdLow="100"
Name="Test_JMSServer"
PagingStore="TestPagingStore"
Targets="SchufaDev">
<JMSQueue
CreationTime="1151395702234"
JNDIName="jms/queue/TestQueue"
JNDINameReplicated="false"
Name="TestQueue"
RedeliveryDelayOverride="5000"
RedeliveryLimit="5"
StoreEnabled="false"/>
</JMSServer>
</pre> -
Document flow error in Quality notication
Hello All,
I am seeking solution for document flow error in notification. After completing notification we are not able to find graphical network in Document flow.
We are getting error message says "no original document in document flow"
We have followed this process flow, notification --> create ECN --> change the material with reference to the ECN--> iqs2 complete the notification.
Kindly share if you any solution on this error.
Regards,
MuthusamyHI,
It is an exceptional issue I feel.
Could you check the tables whether that particular doc. is updated or not?
check VBFA table.
Regards
Suresh. -
Totem + GStreamer + srt subtitle : Internal data flow error
Hello all,
I am trying to watch a video with a subtitle in "srt" format, with Totem + GStreamer.
I get a popup with the error message : "Internal data flow error" and my video cannot play.
If I remove the subtitle file, I have no problem watching the video. I do not have this problem with totem + xine, but I want to use gstreamer ...
I have posted a bug report at Gnome.
Do you have the same issue ?
Can any body help ?
Thank you very much
Cheers,
Chicha
Last edited by chicha (2007-10-05 15:16:52)Thank you Don-DiZzLe for your help
I have tried with totem-xine and it worked. But there is something annoying with totem-xine : you cannot change the subtitle font size
That is why I tried totem-gstreamer and found this bug.
This is supposed to work according to GStreamer's website, so if I could help fixe this I would be very happy -
[[ Page Flow Error - Action Not Found ]] - urgent help needed!
Hi all,
My portal application runs on Weblogic 8.1 and I am encountering a vague error which does not point back to any of the application-based files. The error message, as stated in the subject, is
"Page Flow Error - Action Not Found"
I did modify the url-template-config.xml under groWeb/WEB_INF to add a new template to enforce secure access to application resources. Could this have caused the above error?
Any feedback would be greatly appreciated!!
Thanks.Here is just a portion of Page Controller class
package com.amd.portal.presentation.GeneralRegistration
public class GeneralRegistrationController extends PageFlowController
* @jpf:action
* @jpf:forward name="success" path="RegistrationConfirmation.jsp"
* @jpf:validation-error-forward name="failure" path="index.jsp"
public Forward registerUser(RegisterUserForm register_form)
usermanager_ctrl.registerUser(register_form, this.getRequest());
return new Forward( "success", register_form);
Here is a portion of the code from the JSP that uses this controller
<netui:form action="registerUser">
<tr valign="top">
<td><font color="red"> * </font> User Name:</td>
<td>
<netui:textBox dataSource="{actionForm.userName}"/>
  Â
<netui:error value="userName"/>
</td>
</tr>
<tr valign="top">
<td><font color="red"> * </font> Password:</td>
<td>
<netui:textBox dataSource="{actionForm.password}" password="true" />
  Â
<netui:error value="password"/>
</td>
</tr>
<netui:button value="Submit" type="submit"/>
</netui:form>
This apparently doesn't display well when posted but I can email to you if you provide me with your email address. Thanks.
- CW
Message was edited by:
lcwalters -
Invalid request bo for BAPI_GOODSMVT_CREATE call in Message Flow.
Hi, all
I call BAPI_GOODSMVT_CREATE in my message flow through SAP adapter node.
Here is the xml format BO created in ESQL,
<NS1:SapbapigdmvcrtWrapper xmlns:NS1="http://www.ibm.com/xmlns/prod/websphere/j2ca/sap/sapbapigdmvcrtwrapper">
<SapBapiGoodsmvtCreate>
<SapGoodsmvtHeader>
<PstngDate>2008-07-02</PstngDate>
</SapGoodsmvtHeader>
<SapGoodsmvtCode>
<GmCode>03</GmCode>
</SapGoodsmvtCode>
<SapGoodsmvtItem>
<Material>PWRPACK52</Material>
<Plant>1000</Plant>
<StgeLoc>0001</StgeLoc>
<MoveType>201</MoveType>
<EntryQnt>33.000</EntryQnt>
<EntryUom>PC</EntryUom>
<EntryUomIso>PCE</EntryUomIso>
<Costcenter>1000</Costcenter>
</SapGoodsmvtItem>
</SapBapiGoodsmvtCreate>
</NS1:SapbapigdmvcrtWrapper>
By switch on user trace on broker, I got the message that the request bo is not correct.
But I can running BAPI_GOODSMVT_CREATE function without error in SAP GUI function builder test with same input data.
The only thing I am not sure is the posting date, for ESQL messageset, it's defined as DATE, I populated it by CURRENT_DATE function. But in the funtion builder test GUI, I input it as 02.07.2008 format. Is this the problem?Change the data format to YYYYMMDD also doesn't work.
And changed the user profile data format dd.mm.yyyy to yyyy-mm-dd, still remain bo xml input date yyyy-mm-dd, still doesn't work. -
Hi Gurus
Can we Debug the entire Message flow or atleast part of message flow at RUNTIME in the Pipeline services in Integration Server.?
MAXIMUM POINTS WILL BE AWARDED
Regards
BhaskerHey,
In moni there are diff pipeline Steps.
Such as receiver determination, agreement mapping....etc.
You need to check whether your payload had passed through each step.
Xi will also provide you with the system errors like mapping failed, or read time out, or System fail.,...etc
Based on this you can locate the problem.
As far the application error is concerned its mainly the mapping.
In this case you need to copy the payload from moni and paste it in mapping in IR and test the mapping.
regards,
Milan -
cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
SAP System Message: Syntx error or generation error in a screen
dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
alberthello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert -
I get error message "unknown error" When trying to log on to itunes via pc, help please!
I get error message "unknown error" When trying to log on to itunes via pc, help please!
Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.
Maybe you are looking for
-
How to add silver front panel theme for labview 2010
how to add silver front panel theme for labview 2010
-
Concurrence of low level and semantic EventListener
Hello, when in the following program [Cancel] is clicked right after program start, I don't mind that the low level FocusEvent is first processed. But I do wonder why the ActionListener is not processed at all. Only when [Cancel] is clicked a second
-
How to encapsulate virtual disk under veritas Storage Foundation 6.0 on Solaris 10 Sparc
Hi all I'm trying to encapsulate a disk under Veritas SF 6.0 but the system return the following bash-3.2# vxdisk list DEVICE TYPE DISK GROUP STATUS c0d0s2 auto:ZFS - - ZFS c0d1s2
-
Since upgrade to yosemite aperture 3.4.5 won't work
I have 'upgraded' to yosemite. Aperture 3.4.5 won't work this version of OS X. Help. Do i have to buy new version of aperture? Will Nik software work?
-
How can I buy stuff if I forgot my security answers?
I just bought an iTunes card but I can´t remember my security answers son I´m not able to buy stuff. I NEED HELP!!!!!!!!!!!