XI message processing

hi friends,
how to know that how many messages will be processed by your XI machine?
thanks in advance...

Hi ,
Do you mean how messages got processed by particular adapter ?
You can get this in the audit log ( end to end monitoring )
Nanda

Similar Messages

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Message processing failed if we receive attachments via E-Mail

Dear ladies and gentlemen,
we have follow proccess:
We get some e-mails with an attachment. The E-Mail pick up the messages and send it to an RFC Channel.
I changed the payload via the localejbs/AF_Modules/PayloadSwapBean :
localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean TRANSFORM
and the module configuration looks follow:
TRANSFORM swap.keyName payload-name
TRANSOFRM swap.keyValue MailAttachment-1
it looks good and the payload would be swapped okay, and the mapping is also okay.
But if we push the message to the RFC Adapter I get follow error message back:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
So now my question: If is possible, that the adapter try to send also the Body of this E-Mail to the target system ? Because the
Message ID is the ID from the payload of the E-Mail Body.
It is possible to keep away the E-Mail Body from the payload?
Because we need only the attachment. Or if I I have to setup via Bean anything in the RFC Adapter ?
Thanks
Kind reagards
Stephan Kohler
P.S. The PI System is an PI 7.1, the target system would be an R/3 4.6. I haven't any success with the RFC Adatper version 7.10 or 6.40

> Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
>
Is your attachment an XML? Is this XML structure is same as what you mapping source is? If that is the case, it should be okay. Is this interface working for non-mail sender? You might want to re-import the RFC structure in to PI again.
VJ

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

Message processing failed, FTP Receiver Adapter error...

Hello all,
We have a Idoc to File(FTP) scenario using PI.
When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
Any Idea why?
Thanks in advance.

Hi ,
There are two things that you can do
1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
2- in your adpater change the connection mode from Per file transfer to "Permanent".
Please feel free to reply on this thread if you are not able to.
Thanks

File Receiver - before message processing *urgent*

Hello experts,
I have a scenario where i need to execute a script in File receiver adapter.
problem: "i send an xml file to target system, but as long as there is a .xml file in the directory, it should not send.
He should wait and send only then when there is no .xml file in the directory."
Is that possible with "run operating system command before" in the receiver adapter or i need for this issue BPM?
Best wishes,
FK

Hi,
File receiver adapter has a "Run Operating System Command Before/After Message Processing" feature, so you could use it for such purpose :
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
I think it could be better to use a script than using BPM (it will save resources at XI level).
Chris

How to stop message processing based on validation?

Hello experts,
I have a requirement to stop message processing in the graphical mapping based on validation results. Here is the scenario - messages are translated using graphical mapping and sent to the target system. An RFC lookup will be done to ECC to determine if the data in the message is good. If the lookup returns a negative result, message processing should be stopped right there.
I guess we can throw an exception from the mapping to force a failure and stop further processing, but that will cause the message to show up as failed on SXMB_MONI and cause alert emails to be sent out in PROD. Another option will be to supress creation of the root node itself, but I think the message will then fail in the subsequent "call adapter" step if the target schema has a min occurence of 1 for the root node (as in the case of IDocs).
Is it possible to do it without using BPM?
Thanks,
Michelle

Hi Michelle,
If your requirement, to stop message processing without sending an alert?
If yes, then you can have a alert rule, not to trigger alerts on a failure (And to raise an exception based on the result from RFC loookup).
If your requirement is not to make the message fail, then you have to go for the ccBPM route.
Best Regards,
Ravikanth Talagana

"up and running no message processing until now"

Hi,
I am doing a multiline scenario with File Content Conversion. In Adapter Monitor, Message is processed in the sender CC and in the Receiver CC it shows "up and running no message processing until now"
Whats mean by this ?. What is the status of my message ? Where I can monitor the message send from sender communication to the Receiver communication channel (If not in SXMB_MONI ?)
Thanks,
Ram

hi,
check adapter message monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
you should see all message over there
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESSING

hi.
just i want to know what is the purpose of run operating system command before message processing,after message processing under file sender adapter.
waiting for your great answer.
bye.
regards.
seeta ram.

Hello Seeta,
let me see if I give it using a simple scenario that I implamented : i nedd to transfer a very large file from one server to the other by XI.
to save space and network traffic I use an OS command before picking up the file to run a zip command to zip the file.
after I transfer the file to the target server I run another OS command after the transfer to unzip the file.
now to your second question:
the before Os command on the target server is used mostly for checks (make sure there isn't a file by that name or backing up existing data)
and the after sender OS command is usualy for backing up or erasing existing files (cause it is done only after the first part was finished succesfully).
Uri Lifshitz.
p.s.
there was a blog obout this titled "XI as a huge file mover"
and you can see a description and my scripts at https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/03/additionaltipsforusingXIasahugefiletransfer%28withbatchscripts%29&

OS level command before message processing

Hello
I am getting the files from the SFTP server through the shell script and expecting to be processed by my File sender adapter.
I have configured my File adapter which will poll the directory into which the shell script gets the file and it is scheduled at say 60 sec duration and i had configured OS level command before message processing.
But when i monitored my communication channel and also my directory I found out that its not executing the OS level command. I tried dropping the dummy file into the directory. This time when checked in comm channel monitoring, it executes the OS level command and gets the file from the SFTP server and adapter polls the SFTP file as well. But i don't want to use dummy file each time.
Is there any way by which we can always make adapter to execute OS level command. I tried various options like Process Empty files etc etc but no luck.
Thanks in advance.
regards
rajeev

Rajeev
How about placing a dummy file of 0 bytes, setting up the 'Handling of Empty Files = Don't create message', Processing mode = 'Test' and then writing a post operating command script as well, to move all the files to archive directory except the dummy file.
Not a clean solution but just a thought.
http://help.sap.com/saphelp_nw70/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm

Error receiving AS2 message from partner: B2B-50037: B2B inbound message processing error

B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
        at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
        at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
        at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
        at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
        at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
Ken

Ken,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work.

Message processing failed in XML parser

This is IDoc to file integration. When I test (WE19), I did not put any value in the 'Quantity' field (which is 6 characters long).In the message mapping I put a condition to see if the value is empty then put zero, and it did not give any error. I have given all the fixed field lengths in the file adapter but still getting the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)'

When I enter value in the 'Quantity' field, the integration works fine. The value 'tablero de control' is the 'Description' which is the next field. My Content Conversion is like;
Field1, Field2, Quantity, Description
(where Field1 and Field2 are mandatory and Quantity and Description are optional)
When I provide all 4 values, the integration work just fine, when I do not provide 'Quantity' it fails.

XI message processing is very slow

XI message processing is very slow.I did everything in tuning guide, but it is still very slow.
I executed <b>DB13-->Check and update optimizer statistics</b>
XI message is faster in another XI server.Although another XI server's hardware is weaker.
I checked DB2 tablespaces and extend them.
What can I do for higher performance?
Thanks.

Hi Cemil
The following thread can throw some light on what you are looking for..
Where could I find the information about XI performance?
Also, check the following pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d
Regards
krishna

Messages are in to be delivered state and slows down the message processing

Hello,
Messages are in to be delivered state and slows down the message processing.
this happenens in case of DB2 on some machine where the issue about high load on DB2 is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original SQL statement configured in the channel configuration,
Can you please help me out in solving this issue?
Thanks,
Soorya

Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords

FTP Adapter with Runtime OS Command before Message Processing

Hi PI Techies,
I have a confusion in using Sender FTP Adapter with Runtime OS Command before Message Processing.
Scenario is like this:
Ftp Adapter has to pick a file from FTP server after it checks that a Blank Marker file exists on PI server AL11 directory say "tmp directory".
For this I am using Runtime OS Command before Message Processing where a shell script will check the existence of Blank Marker file on PI server AL11 and if found , it exits the script and FTP Adpater will then pick the Actual Data File and Process it.
Now Confusion:
I am confused in technical execution of steps by FTP Adapter..
Whether FTP Adapter polling initiates the Interface or Runtime OS command checking the File existence will initiate the Interface?
May be its follish to you guys... but please answer ..
Regards,
Anurag

Hi,
I will take it other way as we need to process the Data File not Marker File ( its just for checking the Data File is completely written on FTP server).
Other way mean " Will Poll for Data.txt File and if found then Runtime OS Command will do connect to FTP and check if Marker File exists, if yes then delete the marker file and read the actual Data File for processing.
Please let me know, if Marker File does not exists on FTP folder, will it still read the Data File or will it exit the Adapter execution?
Your help is much appreciated.
Regards,
Anurag

OS command on sender channel before message Processing

Hi all,
I am trying run unix script on my sender CC before message processing it's not working ,but If I use the same command in the program RSBDCOS0,I can see shell script is working.
I am just providing the path of the script and and shell script name.Tried below option to check it runs but it is not.
/home/pd1adm/concur/get-concur.sh
sh /home/pd1adm/concur/get-concur.sh
Please help me out.
Thanks,
Madhu

Please check the FILE permissions.
I had the same problem long back at that time there was some file permission missing.
Please ask your BASIS or UNIX team to check the permissions.
Thanks
Naresh N

XI message processing

Similar Messages

Maybe you are looking for