XI/PI System jobs and reports

Hello experts,
is there a documentation of PI specific jobs and reports available?
I need to know, how the following reports work:
RSXMB_AGG_DATA_CONDENSE
RSXMB_DELETE_MESSAGES
RSXMB_TABLE_SWITCH
RSXMB_DELETE_HISTORY
SDTS_SCHEDULE_CCMS_PAUSES
RSWEQSRV
RSICFDLT
RSWWCLEAR
RSWWCOND
Thanks in advance,
David

Hi,
You can find that in below links.
[Periodical Tasks in XI|http://help.sap.com/saphelp_nw04/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/content.htm]
[Archiving & Deleting Messages In SAP XI|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50]

Similar Messages

Run the Report as a Background job and Get the Output in Excel in Local PC

Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
Varlanir

GUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
    READ DATASET dsn INTO rec.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
      WRITE / rec.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
   FILETYPE                      = 'ASC'
TABLES
    DATA_TAB                      = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.

Report 6i and Report 10g together in a system

Hi,
Is it create any problem if I installed both Report 6i and Report 10g in
a system having 10g database.
What are possible problem that will have to face?

Hi,
There won't be any issues. We are using both in our development machines. You must make sure the tnsnames.ora has correct entries.
Regards,
Manu.

Extraction and Reporting is not working in BI SYSTEM

Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath

I need to use Outlook Express to apply for jobs and I either don't have it but when I try to send an e-mail on Outlook Express, it won't go through and gives me an error report.....I really need to be able to use Outlook Express to apply for jobs. Help!

When I try to apply for job and when I try to e-mail my resume' and Outlook Express comes up to reply to on, I put in my information, etc but when I hit send, it doesn't go through and says? POP and then error report and doesn't go through.

I can't provide a solution with or without the error message, but without an error message, you are making everyone guess at what you see. I have no idea what you see, and I think someone who might be able to help you solve your problem would need to know what that message says. Is "Outlook Express" (Windows Live Mail) your default email processor, if not what is?

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

Unable to find my system in Job and BI monitoring workcenter after configuring BPMon.

Dear Experts,
I had configured BPMon for background job monitoring, I had activated monitoring objects but could not see my system in Job and BI monitoring workcenter. Please provide some inputs on how to debug this.
Thanks,
Phani.

i see it this way, as long as the underlying existing call interface supports the existing database type it should be just working fine

System status and user status in Line Item Reports

Dear PS-friends,
I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
Has anybody an idea how it works to show the system status and user status in Line Item Reports.
Thanks in advance!

Problem is solved.
I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

System setup/installation to use Forms and Reports 11g

We are a high education organization. We recently get a request from faculty to create an Oracle environment for academic purpose. We have Oracle database 11g installed on a Windows 2008 R2 64bit server. Faculty require to use Froms and Reports 11g. My questions is what will be the basic minimum set up to make that happen? Can we also install the WLS with Forms and Reports on the same server that the database is on, then only install Forms and Reports client part on user workstations? Can somebody provide any documentation that can help on this issue? Thanks.

Michael Ferrante's post in this thread has a list of useful documents
How to run Oracle Forms app on local PC?
For your server configuration you should be looking for the Windows 64 bit version of Weblogic Server and Forms.
> My questions is what will be the basic minimum set up to make that happen?
The system requirement guide in the link above will have all the information you need
> Can we also install the WLS with Forms and Reports on the same server that the database is on
Yes, assuming your server meets the combined requirements for both products, although I prefer to keep them separated for ease of administration.
> ..then only install Forms and Reports client part on user workstations?
For Forms 11g there is no installation required on the client to run forms applications (other than JRE). However if the user workstations will be used to run the forms builder and reports builder used to create the forms and reports modules, you will need to install Weblogic and Forms (Developer install type) on each workstation.
One note of caution: Forms 11g is extremely sensitive to the versions of the components - Weblogic Server, Forms, Java, Internet Explorer, etc. I would use only the versions certified in the certification matrix in the link above.

System Language is English but all documents and reports come out in French

System Language is English but all documents and reports come out in French. How do I get the system to switch all of the documents and reports to print in the English layouts?
thx, Richard.

Richard,
Probably this is due to what Dan has pointed out.
You can open the PLD template and go to Print Layout Design menu on the Top and click Display document properties. Check the language properties.
Suda

System Measurement: Measure and report license usage - System Type

After a 'system copy' to create new DEV and QAS PORTAL systems from a copy of PROD the USMM (System Measurement: Measure and report license usage) process identifies the System Type of the new systems as PROD.
This was first noticed when performing a 'License Audit'.
System Type: PROD
(Ex: URL http://<server>:<port>:50000/usmm)
Where can the 'System Type' be changed after a 'system copy'?

Hi,
You can change the System Type in Visual Admin under service Licensing Adapter.
Thanks
Sunny

Retain background jobs and its variants before system refresh activity

Hello All,
I am going to perform system refresh activity on quaity system on monday. Customer wants to retain the background jobs and its variants in the quality system. Please guide me and let me know the steps to retain the background jobs and its variants before starting the system refresh activity.
Regards
Subbu

Dear Subbu,
You have to export the TBT* Tables to retain the jobs. You can do this with R3trans:
1. Make Export file
2. Make Import file
3. Make Export in Q System before Systemcopy
4. Start Database and not SAP
5. Make Import in Q after Systemcopy
6. Start sap
1. Make Export file /tmp/export_cmd
export
file='/tmp/export_Q.dmp'
client=<your client>
delete from TBTCA
delete from TBTCB
delete from TBTCCNTXT
delete from TBTCCTXTT
delete from TBTCCTXTTP
delete from TBTCI
delete from TBTCJCNTXT
delete from TBTCJSTEP
delete from TBTCO
delete from TBTCO_V01
delete from TBTCP
delete from TBTCPV
delete from TBTCR
delete from TBTCS
delete from TBTC_SPOOLID
delete from BTCEVTJOB
select * from TBTCA
select * from TBTCB
select * from TBTCCNTXT
select * from TBTCCTXTT
select * from TBTCCTXTTP
select * from TBTCI
select * from TBTCJCNTXT
select * from TBTCJSTEP
select * from TBTCO
select * from TBTCO_V01
select * from TBTCP
select * from TBTCPV
select * from TBTCR
select * from TBTCS
select * from TBTC_SPOOLID
select * from BTCEVTJOB
2. Make Import file /tmp/import_cmd
import
file='/tmp/export_Q.dmp'
3. Make Export in Q System before Systemcopy
R3trans -w /tmp/Q_export.log /tmp/export_cmd
4. Start Database and not SAP
sqlplus "/as sysdba"
SQL> startup
or
startsap
stopsap r3
5. Make Import in Q after Systemcopy
R3trans -w /tmp/Q_import.log /tmp/import_cmd
If you want to undo this, start the export script in P system and the Import script in Q system.
Don't be afraid of the delete statement but without delete it doesn't work!
6. Start sap
startsap
Best regards
Willi Eimler

Setup and configuration for system monitoring and IT Reporting for Java sys

Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
Neni

HI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help

PL/SQL batch jobs and error reports handling

Has anyone ever had to write exception and statistics reports from a PL/SQL batch job and how have those been handled? I have 3 options below not but sure what is best (or is there another) way to do this.
I have a series of batch jobs that are written in PL/SQL. A unix script will invoke a SQL*Plus script that calls a stored procedure. The stored procedure may call other procedures and functions. I'd like to collect all the errors and write them out a report that the user can review. I was thinking of just writing a message using DBMS_OUTPUT and spool that to a file in my script, but I have concerns that other message in the buffer may end up in the report. The other thought was to use UTL_FILE but then I would have to make sure the file handle got passed thru all the procedures and functions appropriate. The last thought was to write to a table ( a temporary PL/SQL table) , and then read that table and write to a file using UTL_FILE (don't have to pass file handles that way) - but I'm not sure if a called function or procedure can access that table.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by mirp:
Has anyone ever had to write exception and statistics reports from a PL/SQL batch job and how have those been handled? I have 3 options below not but sure what is best (or is there another) way to do this.
I have a series of batch jobs that are written in PL/SQL. A unix script will invoke a SQL*Plus script that calls a stored procedure. The stored procedure may call other procedures and functions. I'd like to collect all the errors and write them out a report that the user can review. I was thinking of just writing a message using DBMS_OUTPUT and spool that to a file in my script, but I have concerns that other message in the buffer may end up in the report. The other thought was to use UTL_FILE but then I would have to make sure the file handle got passed thru all the procedures and functions appropriate. The last thought was to write to a table ( a temporary PL/SQL table) , and then read that table and write to a file using UTL_FILE (don't have to pass file handles that way) - but I'm not sure if a called function or procedure can access that table.
<HR></BLOCKQUOTE>
Just a thought
If You use utl_file, You can write all opeations with files in a separate package with public variables of file handles and so on. Not necessary to pass all variables to each procedure and function

Promotion and report schedule job goes to pending state

hi everyone,
we are using BO4.1 SP02 Patch 1 platform, suddenly now report schedules and promotion jobs are not promoting and it goes pending state.
we restarted the LCM APS and AJS , but still promotion job in pending state
we also restarted Webi APS and AJS but still schedule in pending state.
anyone faced this problem before, could you please help us to find the cause.
Regards,
Ganesh

HI Ganesh
Can you make it 1 and try out once
Because 1 = OUTPROC and 100 = MIXEDPROC
Outproc causes the job server children to shut down after every job
Mixedproc causes the job server children to shut down after every 100 jobs
and Job server children will be automatically shutdown if left unused for more than 2 hours
Can you check the taskmanager for the jobserverchild.exe is created or not ???
Please get back

XI/PI System jobs and reports

Similar Messages

Maybe you are looking for