XI Receiver Channel Restarts

Hi
Does anyone know how may times an XI Receiver Channel will attempt automatic restarts? Also what are the time periods between each restart?
I'm testing an Exactly Once In Order scenario and want the receiver system to be offline in order to see how i can get the messages flowing again once it is up (in order).
Will the message go into a failed state after a certain amount of time?
Thanks

Hi Riaz,
Every receiver channel retrive 3 times & Retry Interval is 5 mins. You can overwrite it
And Yes. After the specific retrival time message will go into failed state.
User should have have the SAP_XI_ADMINISTRATOR_J2EE role.
Thanks,
Soumen
Edited by: soumen patra on Jul 29, 2010 1:01 PM

Similar Messages

  • SOAP Receiver Channel 2 nodes inactive in Production system

    Hi All,
    We are facing an issue with the SOAP receiver channels in production system. There are 4 nodes which can be seen in the communication channel monitoring and out of which 2 have the status as inactive and the short log says "inactive or never used".
    But the same nodes are active on the sender SOAP channel and all other channels.We have also checked the Status of the SOAP service that is also set to active.
    Now when the server (App server5 in our case) is switched off, which has the 2 active nodes, the messages are not processed since the nodes on the other server are inactive.
    Request you to please help us out in finding out why the nodes are in inactive status only for SOAP receiver channels. Do we need to change any settings at the adapter engine level.
    Thank you.
    Regards,
    Sarvesh Desai
    Edited by: Sarvesh  Nispat Desai on Aug 25, 2010 5:25 PM

    There is an error in reporting the status of SOAP channels. This error has already been fixed by SAP and is available as a fix in higher releases (PI 7.10 and above, latest SPs) .
    The status "inactive or never used" is shown in channel monitoring at the following two times:
    1. After creating a new SOAP channel (sender/receiver) till this channel processes any new message.
    2. After the PI system is restarted, all the SOAP channels show this status, though they are ready to handle any incoming/outgoing messages. The channels continue to display this status till they process any new message.
    In both these situations, the SOAP Channel can handle/process messages successfully. So, kindly ignore this channel status ("inactive or never used") reporting error in channel monitoring. This will not at all hamper the normal functioning of the SOAP channels.
    Hope this answers your query.

  • JDBC Receiver Channel Error

    Hi All,
    Very Urgent!!!
    My scenario is RFC to JDBC async . Earlier scenarion is working fine but not its showing error,
    "Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: The resource pool has already been destroyed."
    For that already restart JAVA stack once and change some configuration in receiver channel like, timeout parameter in advence tab and check that "Disconnect from Database after processing each message"
    But same error occurs when I try to resend the data again.
    Please suggest!!
    Thanks,
    Arthita

    Hi All,
    Now showing something else.
    Not showing previous error but status is showing "Message processing started" but after that not processed.
    Please see the SS.
    Please suggest something.
    Thanks,
    Arthita

  • JDBC Receiver channel is not showing any payloads

    Hello Experts,
    My interface is ABAP PROXY to JDBC i am facing a strange issue in ECC moni payload is succesful in PI moni also Payload is black colour flag but my Receiver JDBC channel is not showing any thing but it is in green colour (it is not showing neither succes nor error messages logs are empty).Sender chaneels are working only problem with receiver JDBC channels
    In DEV and PROD it it is working in QUAL it is showing this problem.I take the restart of QUAL server still it is behaving like that
    Please throw some light on the issue any help is higlhly apprecaited.
    Regards
    Praveen

    Hi,
    first check in pipe line step call technical routing , mapping execution generated JDBC receiver message pay load or not.
    if it is not generated then check mapping , if is is generated then restart the channel and check what communication channel name you given in receiver agreement.
    monitor the same channel, if all JDBC receiver channels have same behavior then restart the JDBC adapter service in NWA.
    rEGARDS,
    rAJ

  • Exception caught by adapter framework: RfcAdapter: receiver channel not in

    Hi friends,
    I am  doing a file-RFC-file scenario. This is based on the blog: /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit The company ID is sent to the RFC through a xml file. RFC will return the company details which will be written again into a xml file.
    My source file is getting picked up. But while sending the company ID to the RFC, i am getting an error. It says: <b>Exception caught by adapter framework: RfcAdapter: receiver channel not in list of running clientPools:</b>. I have checked the RFC and is running perfectly.
    Can anybody help me to solve this error?
    Regards,
    Divija.

    Hi,
    it is better to restart the RFC adapter engine.
    Is this RFC adapter is active in the Adapter Monitoring ?
    Also change the RFC adapter configuration and activate it. Then activate the Receiver Agreement.
    Also refer SAP note -730870 ( question  no 17 and 20)
    Regards,
    Moorthy

  • Error in JMS receiver channel

    Hi,
    I have a JMS receiver channel which is connected to message queue of TIBCO which is working fine.
    But if I use the same channel after a day it goes into error and after restart of the channel it again works fine.
    Error: Message process failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Unable to write newJMS Message body for message: 343241-......... Connector Exception: ... session ended..
    Thanks,
    Aravind

    Hello Aravind,
    I have made similar experiences while accessing JMS queues.
    Maybe the JMS queue was not available for a short time. So the receiver channel could not connect.
    Best regards,
    André

  • Error with JMS receiver channel

    Hi,
    We have a scenario in which Order response will be sent from ECC to WebLogic (JMS system) through PI.
    After the restart of JMS, we are facing issues with JMS receiver channel.
    Some of the responses are delivered, and for few we have the error as described below.
    Also, one of the cluster node of the JMS receiver channel has the below error.
    Please anybody throw some light on this.
    Error description:
    " Delivery of the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Pending message discovered: dfff2e2b-80f5-94f1-a068-001cc4d99b3e.The channel is configured throw an recoverable, temporary error for this warning (default). Decide whether you want to bypass this message. If so, set the Pending Handling  channel parameter to 'Bypass' and restart the message afterwards.. "
    Thanks in advance.
    Regards
    Bhanu Tiruveedula.

    Hello Bhanu,
    we have been getting this error from long time with JMS channel but no solution except changing the configuration so that it can throw exception and move on.
    we have also noticed that this happens for some time and then gets resolved automatically. so it seems to be some data which is not expectable by jms channel.
    regards,
    Ratna

  • Start JDBC Receiver channel twice per day

    Hello,
    I need to get some piece of data from Oracle database twice per day. For example at 12:00am and 12:00pm. Standard JDBC Receiver channel has no needed settings. It has only "poll interval" without exact time.
    I can set up "poll interval" to 12 hours, but this can't guarantee that JDBC receiver channel will works only twice per day. For example after XI system restart JDBC adapter loses time counter. It means that JDBC adapter can starts more than 2 times per day.
    I have only one idea at this moment.
    I can create ABAP program which can be planned as ABAP job at needed time and with needed period.
    This program should send some dummy message to Integration Engine. Integration Engine should start some Integration Process which can read data from Oracle database via JDBC channel.
    What else opportunities are?
    Thanks.
    Best regards,
    Eugeny

    Message deleted
    Message was edited by: Shabarish Vijayakumar

  • Error with RFC receiver channel

    Hi,
    Getting this below error for receiver RFC channel. Can anyone please look into this error urgently.
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.adapter.rfc.core.config.RfcConfig.getChannel() of a null object returned from com.sap.aii.adapter.rfc.core.client.RfcClientPool.getConfig()

    Hi,
    Restarted but no result. Getting another error :
    Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling Z_SD_XI_BAPI_CREATE_VA_SLSORD3 in remote system (RfcClient[CC_RFC_Z_BRONZE_VA_RCVR]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Could not open file /usr/sap/XP3/interfaces/va/br_vaout_20140401_04204.
    I do not understand why RFC receiver channel is giving this error.
    Can any one please look into it on priority.I need it to get resolved very soon.
    Thanks

  • As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

    Hi,
    There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
    I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
    Kindly provide your inputs to help me resolve this.
    Thanks,
    Ruchi

    Hi Ruchi,
    500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
    Regards,
    Udo

  • SFTP Receiver channel error :Message could not be forwarded to the JCA adapter.

    Hello Guys,
    I have different SFTP Receiver channels running in production from long time. Suddenly, they have started giving the same kind of error as below:
    Any suggestion where to look for the solution to this issue.
    Thank you!
    Regards,
    Simran

    Hi,
    Did you try connecting to the SFTP server using filezilla? May be something might have changed on the FTP server.
    You can use the xpi inspector to get additional information.

  • Content Conversion in receiver channel

    Hi all,
    I have a proxy to FTP scenario with no mapping involved.Over proxy communication PI is receiving the data, I am creating the CSV file using content conversion in receiver channel and placing the file at FTP.
    The file name is coming in one of the field of the input xml,I am using variable substitution and setting the file name from that particular field value.But as I don't want that node and file name element in my output file content, please guide me what parameters can I set in my content conversion to remove the FileNode from o/p csv file.
    The sample input xml is
    <MT>
    <Record>
    <Field1>1</Filed1>
    <Field2>2</Filed2>
    </Record>
    <Record>
    <Field1>3</Filed1>
    <Field2>4</Filed2>
    </Record>
    <FileNode>
    <FileName>InutFile</FileName>
    </FileNode>
    </MT>
    I want output xml to be like
    1,2
    3,4
    I have followed this blog /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12 to cut the FileNode, but it gives an error in cc parameters.
    In my actual i/p payload,the Record is 0..unbounded and there are 50 sub elements inside Record element.
    Please provide your inputs.
    Thanks,
    Ruchi

    Hi Ruchi,
    Change your structure like this.
    MT>
    <Record>
    <Field1>1</Filed1>
    <Field2>2</Filed2>
    </Record>
    <Record>
    <Field1>3</Filed1>
    <Field2>4</Filed2>
    </Record>
    <FileNode>
    <FileName>InutFile</FileName>
    </FileNode>
    </MT>
    Dont put the filenode under Record.
    Also Add the below parameters.
    FileNode.fieldSeparator     '0'
    FileNode.endSeparator     '0'
    FileNode.fieldFixedLengths     0
    FileNode.fixedLengthTooShortHandling     Cut
    FileNode.fieldNames     FileName
    Now use the same parameter mentioned in the blog .Your problem will be resolved.

  • Unable to clone File Adapter receiver channel for parallel processing

    Hi Experts,
    I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
    While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
    Can anybody provide me suggestions to solve this error.
    Note : without variable substitution , the interface is working good.
    Is it due to, i am trying the source structure field in response file adapter?

    Hi,
    In your CC, do you use some additional paramaters ?
    like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
    Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
    Mickael

  • BCM/SWIFT payment,  parameter file Receiver channel

    Iu2019m using the  u201CSWIFT_payload_parFile_Splitu201D Operation Mapping for the FILEACT payment transaction.
    The result should be
    1) payload file
    2) parameter file (*.par)
    This seems to work just fine. My problems starts with  the receiver channel for the *.par file.
    I need to know more about how to setup the modules and parameters in the "*.par" receiver channel.
    Is there a configuration guide for this?
    Thanks.
    Frank

    Hi Frank,
    I am facing similar issue. I am able to generate the parameter file but the overrides section contains only one parameter "Request Type" whereas there are other parameters that are mandatory. How do I get these filled?
    Regards,
    Deepthi

  • Com.sap.sql.DuplicateKeyException in file receiver channel

    Hi experts,
    I am currently testing the following scenario:
    xml file -> file sender ->file receiver -> csv file
    No mapping is used. Both channels are on the same PI 7.1 system.
    The transformation seems to work so far. The only problem I have is that my receiver channel does not post the message to the directory because of this error:
    Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id f167e134-145e-4b2c-2d47-e431b8b34fd8(INBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: [200]: Duplicate key.
    Is it not possible to use file sender and file receiver in the same scenario? Thanks for any help.
    Best regards.
    Oliver.

    Hi André,
    I am using the test option so the message can be processed multiple times. Anyway, I also tried using deletion but I still get the same error. I also tried a completely new file but still no change. When I check the comm channel I see that there is always created a new message id and when I search the rwb it posts two entries. One from the sender step and one from the receiver step. Seems to be alright to me.
    Regards.
    Oliver.

Maybe you are looking for