XI testing POS Integration Scenario

Hi Folks ,
I am new to XI environment and have a query:
I am configured a process integration scenario for sending TLOG to POSDM. Can you pl advice how can I go about testing my config. At present I do not have any POS-GM system running so I was wondering that I will have to put my *.txn file in the "Source Directory" specified folder...
How can I do a test ..pl advice.
thanks!!

Hi sunny,
No problem .........
Please go thru this simple file to IDoc scenario.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/fileToIDOC&
and if you want to explore more about XI .. sure you want to ...then check out the following step by step scenario guide
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step-by-step+guides
It will be helpful ......
regards
Ashwin

Similar Messages

The userexit is not working in integration scenario- inb. delivery creation

Hi Experts please help,
We know that vl31n is for inbound delivery creation.
in one of the userexits of vl31n, I did code ( shifting the batch to vendor batch )...
So,the user enters batch number under batch field and
fill all other required information and saves to create inbound delivery.
Whilw inbound delivery creation my coding in user exit gets executed and shifts the batch number to Vendor batch field.
This we observed when we check in vl32n or vl33n, the batch entered shifted to Vendor batch field() batch field is space.
This is working fine with vl31n inb. delivery creation.
But in integration testing it failed.
In Integration, what is happening the other system called "ICH" is creating ASN (shipping note) with the batch number, which inturn created the inbound delivery in R/3 via XI as shown like below.
Integration scenario :
ICH System (ASN) --> XI --> R/3 System (Inb. delivery creation)
So when "ICH" triggers ASN to R/3 the inbound delivery creation is happening but the batch number is not shifting to vendor batch field.
when we open the inbound delivery in vl32n, the batch number is under batch field only...it should be under vendor batch field.
My understanding is my user exit coding of vl31n not getting executed in the integration process.
Kindly help me what can I do to shift the batch sending from ICH to shift to vendor batch field.
Please let me know if I could not explain the scenario.
THANKS IN advance.
YOUR HELP WILL BE GREATLY APPRECIATED.

the ASN from ICH, it uses a standard idoc function module IDOC_INPUT_DESADV1 and there is one user exit EXIT_SAPLV55K_012 which calls ZXTRKU07
need to code there.
solved by meetings with some other experts.
THANKS.

Issue with B2B Simulator for testing Healthcare Integration in SOA 11.1.1.6

Hi All,
I've installed the healthcare integration patch on top of SOA 11g PS5, and am now trying out the integration scenarios as detailed here . When running the B2B simulator as detailed in the readme, I'm able to see that the ADT file is polled from /tmp/blite/test/in folder, but the same file is not put into the /tmp/blite/test/out folder as expected. Nor am I able to see the messages in the Healthcare UI dashboards, neither the SCA composite instance is instantiated in the EM console.
The simulator log generated by B2B simulator does not show any apparent error, except for a oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform. But the process seems to have gone ahead and also shows that the message sent count as 1. Has anyone tried this integration scenario in Healthcare? Any pointers would be highly appreciated. Thanks in advance.
Simulator log below (did not find an option to upload the file)
FINEST: Generating Inbound configuration : 1
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: genInboundConfig : Enter
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: genInboundConfig : Exit
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Generating Outbound configuration : 1
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: genOutboundConfig : Enter
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: genOutboundConfig : Exit
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Generating the simulator config file...
Mar 8, 2013 12:07:38 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Exception while generating simulator config file
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: HL7Plugin: receriver(): Parameters =tcp.receiver.port:11002
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: HL7Plugin: receriver(): Parameters =isFARequired:false
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Setting the inbound config properties...
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger log
FINE: Please enter CTRL+C to stop the B2B-Lite
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: initialization Enter
Mar 8, 2013 12:07:39 PM oracle.integration.platform.blocks.FabricConfigManager <clinit>
WARNING: JRF is unable to determine the current application server platform.
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger log
FINE: TCP Listening on port : [11002]
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: SelectionKey for port 11002
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: initialization Exit
Mar 8, 2013 12:07:39 PM oracle.integration.platform.blocks.WLSPlatformConfigurationProvider <clinit>
WARNING: JRF is unable to determine the current application server platform.
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: startserver Enter
Mar 8, 2013 12:07:39 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: startserver Enter (After Initialization)
Mar 8, 2013 12:07:40 PM oracle.dms.instrument.DMSConsole init
FINE: DMSConsole is being initialized at 1362724660538
Thread (id):
pool-6-thread-1 (13)
Stack:
oracle.dms.instrument.Noun(Noun.java:113):<init>
oracle.dms.instrument.Noun(Noun.java:2261):<clinit>
oracle.tip.b2b.metric.MetricRoot(MetricRoot.java:40):<init>
oracle.tip.b2b.metric.EndpointSensors(EndpointSensors.java:86):<init>
oracle.tip.b2b.metric.MetricFactory(MetricFactory.java:284):getEndpointSensors
oracle.tip.b2b.metric.B2BSensors(B2BSensors.java:282):updateEndpointStatus
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:1347):updateMetrics
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:980):processMessages
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:397):run
oracle.tip.b2b.transport.basic.FileReceiver(FileReceiver.java:483):init
oracle.tip.b2b.simulator.basic.Worker(Worker.java:74):run
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:886):runTask
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:908):run
java.lang.Thread(Thread.java:662):run
Mar 8, 2013 12:07:40 PM oracle.dms.util.ServerEnvironment getServerEnvironment
FINE: initialization error
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
 at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
 at oracle.dms.util.ServerEnvironment.getServerEnvironment(ServerEnvironment.java:125)
 at oracle.dms.instrument.DMSConsole.init(DMSConsole.java:307)
 at oracle.dms.instrument.Noun.<init>(Noun.java:114)
 at oracle.dms.instrument.Noun.<clinit>(Noun.java:2261)
 at oracle.tip.b2b.metric.MetricRoot.<init>(MetricRoot.java:40)
 at oracle.tip.b2b.metric.EndpointSensors.<init>(EndpointSensors.java:86)
 at oracle.tip.b2b.metric.MetricFactory.getEndpointSensors(MetricFactory.java:285)
 at oracle.tip.b2b.metric.B2BSensors.updateEndpointStatus(B2BSensors.java:282)
 at oracle.tip.b2b.transport.basic.FileSourceMonitor.updateMetrics(FileSourceMonitor.java:1347)
 at oracle.tip.b2b.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:1005)
 at oracle.tip.b2b.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:397)
 at oracle.tip.b2b.transport.basic.FileReceiver.init(FileReceiver.java:483)
 at oracle.tip.b2b.simulator.basic.Worker.run(Worker.java:74)
 at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
 at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
 at java.lang.Thread.run(Thread.java:662)
Mar 8, 2013 12:07:40 PM oracle.dms.clock.ClockManager createClock
FINE: Checking if clock (default) is loaded
Mar 8, 2013 12:07:40 PM oracle.dms.clock.ClockManager createClock
FINE: The class name for (default) is oracle.dms.clock.SimpleClock
Mar 8, 2013 12:07:40 PM oracle.dms.clock.ClockManager createClock
FINE: Called Class.forName("oracle.dms.clock.SimpleClock")
Mar 8, 2013 12:07:40 PM oracle.dms.clock.ClockManager createClock
FINE: Created a new instance of oracle.dms.clock.SimpleClock
Mar 8, 2013 12:07:41 PM oracle.dms.context.DMSContextManager init
FINE: DMSContextManager is being initialized at 1362724661670
Thread (id):
pool-6-thread-1 (13)
Stack:
oracle.dms.instrument.DMSConsole(DMSConsole.java:364):init
oracle.dms.instrument.Noun(Noun.java:113):<init>
oracle.dms.instrument.Noun(Noun.java:2261):<clinit>
oracle.tip.b2b.metric.MetricRoot(MetricRoot.java:40):<init>
oracle.tip.b2b.metric.EndpointSensors(EndpointSensors.java:86):<init>
oracle.tip.b2b.metric.MetricFactory(MetricFactory.java:284):getEndpointSensors
oracle.tip.b2b.metric.B2BSensors(B2BSensors.java:282):updateEndpointStatus
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:1347):updateMetrics
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:980):processMessages
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:397):run
oracle.tip.b2b.transport.basic.FileReceiver(FileReceiver.java:483):init
oracle.tip.b2b.simulator.basic.Worker(Worker.java:74):run
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:886):runTask
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:908):run
java.lang.Thread(Thread.java:662):run
Mar 8, 2013 12:07:41 PM oracle.dms.context.internal.AbstractContextManager$ContextCleaner <init>
FINE: Creating new Context Cleaner Thread
Mar 8, 2013 12:07:41 PM oracle.dms.trace.TraceManager init
FINE: TraceManager is being initialized at 1362724661891
Thread (id):
pool-6-thread-1 (13)
Stack:
oracle.dms.trace.TraceManager(TraceManager.java:242):init
oracle.dms.instrument.DMSConsole(DMSConsole.java:373):init
oracle.dms.instrument.Noun(Noun.java:113):<init>
oracle.dms.instrument.Noun(Noun.java:2261):<clinit>
oracle.tip.b2b.metric.MetricRoot(MetricRoot.java:40):<init>
oracle.tip.b2b.metric.EndpointSensors(EndpointSensors.java:86):<init>
oracle.tip.b2b.metric.MetricFactory(MetricFactory.java:284):getEndpointSensors
oracle.tip.b2b.metric.B2BSensors(B2BSensors.java:282):updateEndpointStatus
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:1347):updateMetrics
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:980):processMessages
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:397):run
oracle.tip.b2b.transport.basic.FileReceiver(FileReceiver.java:483):init
oracle.tip.b2b.simulator.basic.Worker(Worker.java:74):run
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:886):runTask
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:908):run
java.lang.Thread(Thread.java:662):run
Mar 8, 2013 12:07:41 PM oracle.dms.trace.TraceManager shutdown
FINE: TraceManager is being shutdown at 1362724661895
Thread (id):
pool-6-thread-1 (13)
Stack:
oracle.dms.trace.TraceManager(TraceManager.java:1249):shutdown
oracle.dms.trace.TraceManager(TraceManager.java:256):init
oracle.dms.trace.TraceManager(TraceManager.java:242):init
oracle.dms.instrument.DMSConsole(DMSConsole.java:373):init
oracle.dms.instrument.Noun(Noun.java:113):<init>
oracle.dms.instrument.Noun(Noun.java:2261):<clinit>
oracle.tip.b2b.metric.MetricRoot(MetricRoot.java:40):<init>
oracle.tip.b2b.metric.EndpointSensors(EndpointSensors.java:86):<init>
oracle.tip.b2b.metric.MetricFactory(MetricFactory.java:284):getEndpointSensors
oracle.tip.b2b.metric.B2BSensors(B2BSensors.java:282):updateEndpointStatus
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:1347):updateMetrics
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:980):processMessages
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:397):run
oracle.tip.b2b.transport.basic.FileReceiver(FileReceiver.java:483):init
oracle.tip.b2b.simulator.basic.Worker(Worker.java:74):run
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:886):runTask
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:908):run
java.lang.Thread(Thread.java:662):run
Mar 8, 2013 12:07:41 PM oracle.dms.trace.TraceAggregator shutdown
FINE: TraceAggregator is being shutdown at 1362724661900
Thread (id):
pool-6-thread-1 (13)
Stack:
oracle.dms.trace.TraceManager(TraceManager.java:1315):shutdown
oracle.dms.trace.TraceManager(TraceManager.java:1249):shutdown
oracle.dms.trace.TraceManager(TraceManager.java:256):init
oracle.dms.trace.TraceManager(TraceManager.java:242):init
oracle.dms.instrument.DMSConsole(DMSConsole.java:373):init
oracle.dms.instrument.Noun(Noun.java:113):<init>
oracle.dms.instrument.Noun(Noun.java:2261):<clinit>
oracle.tip.b2b.metric.MetricRoot(MetricRoot.java:40):<init>
oracle.tip.b2b.metric.EndpointSensors(EndpointSensors.java:86):<init>
oracle.tip.b2b.metric.MetricFactory(MetricFactory.java:284):getEndpointSensors
oracle.tip.b2b.metric.B2BSensors(B2BSensors.java:282):updateEndpointStatus
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:1347):updateMetrics
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:980):processMessages
oracle.tip.b2b.transport.basic.FileSourceMonitor(FileSourceMonitor.java:397):run
oracle.tip.b2b.transport.basic.FileReceiver(FileReceiver.java:483):init
oracle.tip.b2b.simulator.basic.Worker(Worker.java:74):run
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:886):runTask
java.util.concurrent.ThreadPoolExecutor$Worker(ThreadPoolExecutor.java:908):run
java.lang.Thread(Thread.java:662):run
Mar 8, 2013 12:07:41 PM oracle.dms.trace.TraceManager recordConfig
FINE: DMS Transaction Tracing is enabled at MIN level
Mar 8, 2013 12:07:41 PM oracle.dms.context.internal.AbstractContextFamily <init>
FINER: New ContextFamily created [0000Jp8i2el0vlwLsES4yX1HEOSp000000] - invoked with stack:
Thread (id):
ContextCleaner (18)
Stack:
oracle.dms.context.internal.jse.JSEContextFamily(JSEContextFamily.java:55):<init>
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:616):newFamily
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:255):getContext
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:63):getContext
oracle.dms.context.DMSContextManager(DMSContextManager.java:413):getContext
oracle.dms.context.DMSContextManager(DMSContextManager.java:395):getContext
oracle.dms.context.internal.AbstractContextManager$ContextCleaner(AbstractContextManager.java:1022):run
Mar 8, 2013 12:07:42 PM oracle.dms.context.internal.AbstractExecutionContext <init>
FINER: New AbstractExecutionContext created [0000Jp8i2el0vlwLsES4yX1HEOSp000000, 0] - invoked with stack:
Thread (id):
ContextCleaner (18)
Stack:
oracle.dms.context.internal.jse.JSEExecutionContext(JSEExecutionContext.java:108):<init>
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:619):newFamily
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:255):getContext
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:63):getContext
oracle.dms.context.DMSContextManager(DMSContextManager.java:413):getContext
oracle.dms.context.DMSContextManager(DMSContextManager.java:395):getContext
oracle.dms.context.internal.AbstractContextManager$ContextCleaner(AbstractContextManager.java:1022):run
Mar 8, 2013 12:07:42 PM oracle.dms.context.internal.jse.JSEExecutionContext activate
FINER: JSEExecutionContext activated [0000Jp8i2el0vlwLsES4yX1HEOSp000000, 0] - invoked with stack:
Thread (id):
ContextCleaner (18)
Stack:
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:269):getContext
oracle.dms.context.internal.jse.JSEContextManager(JSEContextManager.java:63):getContext
oracle.dms.context.DMSContextManager(DMSContextManager.java:413):getContext
oracle.dms.context.DMSContextManager(DMSContextManager.java:395):getContext
oracle.dms.context.internal.AbstractContextManager$ContextCleaner(AbstractContextManager.java:1022):run
JSEExecutionContext instance: 0000Jp8i2el0vlwLsES4yX1HEOSp000000,0
m_thread (id): ContextCleaner (18)
m_suspended: false
m_ctxContentMap: null
m_ctxGlobalMap: 0
m_ctxLocalMap: null
m_inheritable: true
m_listeners: null
m_ctf:JSEContextFamily instance:
mECID: 0000Jp8i2el0vlwLsES4yX1HEOSp000000
mCtxMap: 1
mGlobalMap: 0
mPropagateKeys: null
mLogKeys: null
mLimitKeys: null
Mar 8, 2013 12:07:42 PM oracle.dms.context.internal.AbstractContextManager cleanup
FINE: AbstractContextManager.cleanup - Before Cleanup: JSEContextManager Class:
mFamilyMap:1
mCtxStashMap:0
mCtxSuspendMap:0
Mar 8, 2013 12:07:42 PM oracle.dms.context.internal.AbstractContextManager cleanup
FINE: AbstractContextManager.cleanup - After Cleanup: JSEContextManager Class:
mFamilyMap:1
mCtxStashMap:0
mCtxSuspendMap:0
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger log
INFO:
Message Body :
Binary Data Not Displayed
Message Parameters:
id = 1362724662068-644430531
Header Parameters:
filename=MyCompany_ADTA03_2.3.1_1.txt
filesize=450
file_ext=txt
fullpath=C:\tmp\blite\test\in\MyCompany_ADTA03_2.3.1_1.txt
timestamp=2011-06-24T16:16:42.000+05:30
Associated Endpoint:
file://C:\tmp\blite\test\in
null :
Message Body :
Binary Data Not Displayed
Message Parameters:
id = 1362724662068-644430531
Header Parameters:
filename=MyCompany_ADTA03_2.3.1_1.txt
filesize=450
file_ext=txt
fullpath=C:\tmp\blite\test\in\MyCompany_ADTA03_2.3.1_1.txt
timestamp=2011-06-24T16:16:42.000+05:30
Associated Endpoint:
file://C:\tmp\blite\test\in
null
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger log
FINE: MessageperSecond ::1
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Number of Message Processed ::1
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: To Complete 1 Messages, Blite Takes 0s
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Context is instantiated - HL7 : oracle.tip.b2b.simulator.model.OutboundConfigurationType@2109778
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: CtrlNogenerator Enter
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Message Control Number:CTLID_20080910112956
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: CtrlNogenerator Exit
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Msg ControlNo : CTLID_20080910112956
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: controlnumberdata Enter
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Control Number CTLID_20080910112956
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: controlnumberdata Exit
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: the transport msg is oracle.tip.b2b.simulator.util.BliteMessage@2082b6b
Mar 8, 2013 12:07:47 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: the transport msg is
Message Body :
Binary Data Not Displayed
Message Parameters:
id = 136272466776957083775
name=value
Header Parameters:
tcp.sender.dcID=abc
tcp.sender.sb=0xb
tcp.sender.port=11001
SocketType=Client
tcp.sender.ct=true
tcp.sender.eb=0x1c
tcp.sender.cr=0xd
tcp.sender.host=localhost
Associated Endpoint:
null
null
Mar 8, 2013 12:07:48 PM oracle.tip.b2b.simulator.report.BLogger debug
FINEST: Time taken to send Request Outbound 264ms
Mar 8, 2013 12:07:48 PM oracle.tip.b2b.simulator.report.BLogger log
FINE: Message was sent successfully
Mar 8, 2013 12:07:52 PM oracle.tip.b2b.simulator.report.BLogger report
INFO:
------------------------- Report Summary -----------------------------
Position after 5s
Threads in pool : Inbound 0 0 0 Outbound: 1 0 0 Ack: 0 0 0 Internal: 1 0 0 InternalAck: 0 0 0
MLLP:: Send =1 Ack Receive =0 Msg Receive =0 Ack Send =0
Total Message Sent:1 Total Ack Received:0
 Total Message Received:0

Hello All, any pointers on this would be highly appreciated. All seems fine with the setup, configuration and the server. Not sure, why is the file not being transferred to the destination folder. Also since the file is picked up, no trace is there on its whereabouts, server log does not show any info as well!!

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

How to test the B2B scenario ?

How to test the B2B scenario ?
Because the client may not give permition to test, then i heard one thing in RWB we can test the data, how and where we can test the data ?

Venkat,
Follow the below procedure.
Go to RWB, choose Component Monitoring , click Click Display
Expand Integration Server node -Click Integration Engine .
In the bottom of the page go to TestMessage tab.
In the Service/Interface/InterfaceNamespace enter the Sender Service & Outbound Interface details
Enter your username & pwd and choose the qos.
Paste the payload in the payload area.
Now click SendMessage .
Done!
raj.

Problem with Integration Scenario involving BPM

Hello All
I've created simple async Integration Scenario.
Sender is SOAP, then message is being processed by BPM Integration Process (some simple mapping inside - for now it is just proof of concept - later on it will split messages etc.) . Receiver is JDBC adapter.
Now, when I test Sender-> BPM (using Test Configuration tool ) - works fine, no errors.
BPM -> Receiver - as well.
But when I'm trying to test Sender -> Receiver it fails (so it does when I call Sender webservice from external tool).
Error is:
Receiver Agreement
<Trace level="1" type="B">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
<Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>
<Trace level="2" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for: </Trace>
<Trace level="2" type="T">-SENDER </Trace>
<Trace level="2" type="T">-RECEIVER </Trace>
<Trace level="2" type="T">http://company.com/xi/sn.DataOut </Trace>
<Trace level="1" type="T">error with outbound binding. </Trace> <Trace level="1" type="T">
No standard agreement found for , SENDER, RECEIVER, http://company.com/xi/sn, DataOutt </Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
In fact there is no Receiver Agreement for this pair of sender-receiver, but in scenario those are connected via BPM.
What am I missing in configuration to force PI to send messages correctly?
TIA
Regards
Maciej

Hi Maciej,
If you are trying to test it from the RWB -> Component Monitring-> Integration Engine-> Test Message option, then you should not be giving the receiver system and interface details.
Just specify the details of the sender system, interface name and namespace.
Give the user id and pwd details.
Give the Quality of service as "Exactly Once".
Paste the payload and click on SEND button. (DO NOT GIVE THE RECEIVER SYSTEM details).
It will work.
Thanks and Regards,
ravi Kanth Talagana

Request to provide one small Example for testing XI Integration

Hi
Could anyone provide me with some example where in we can test XI Integration.
I have a situation like I need to integrate a text file in C directory to any other directory.
I need some help on how to build SLD and also to build integration repository and Integration Directory.
I need the steps to be followed in developing them.
Regards,
Ram Mohan Naidu

Hi,
Check these blogs for simple file to file scenario:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
priyanka

Regarding Integration Scenario and Communication Channel Template

Dear All,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
2.What is the purpose of creating Communication Channel Template in IR?
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
Please clarify my doubts.Thanks in Advance.
Regards,
Ramana.

Hi Ramana,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
>>> For graphical overview about the sceanrio.It is not compulsary to create Integration Sceanrio.
2.What is the purpose of creating Communication Channel Template in IR?
>>> In integration scenario while creating the connection between two actions u need to specify the communication channel templates for Sender and Receiver.
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
>>>You can utilize these templates in ID.After completion to creating the configuration sceanrio need to modify the parameters of the channels.
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
>>> From Tools-->Transfer Integration sceanrio from Integration Repository, From input help choose the sceanrio,Continue and click on Finish ,with the same name the configuration scenaro will create in ID.You need to follow the Confiuration steps like Assign services , here need to choose u r source & target business systems and Configure Connections in this step you can cross check the interfaces,mapping,channel templates involved in this sceanrio and Generate. It would automatically generates Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination. It would shown to u Generation Log, here you can check what are the objects generated and if there are any errors it would shown Number of errors.
By setting the appropriate channel parameters, activate all objects from change list.Now u can able to test the sceanrio.
However in latest version it is not compulsoary to create Integration sceanrio in IR and to the above things.You can use Configuration Wizard to do all these things or you can do these mauvally.
Hope it will helps to clear u r doubts.
Cheers
Veera
>>>Reward points,if it is needful.

Transfer Integration Scenario from Integration Repository

Hello,
I am in the process of setting up a 2004s PI system. I have gone thru the PI template installer in the NWA, applied note 939592 due to a central SLD and I am not stepping through the readiness check from note 817920. I am using version 3 of the check. I am running into an error at step 2.7. This is the step to test the connectivity between the Integration Directory and the Integration Repository. When I press the F4-Help for the Field name, the search results returns "No objects found!". I checked all the connections in the exchange profile and they all seem to be set properly. I then went to menu Tools -> Configuration Wizard. I received a popup stating "Cannot connect to Repository". The details are the following:
#22 11:32:10 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseRuntimeException
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
     at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
     at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
     at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
     at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
I did see another message in the forum (Re: Integration scenarios from Integration Rep) that was very similar but the solution provided in there did not work for me.
Does anyone have any advice?
Thanks.
Regards,
Scott

Yes, I checked everything under the "Connections" section to make sure port, host name, user and passwords were correct. From what I can see, it is all correct. I also checked under the IntegrationBuilder and IntegrationServer sections to make sure the port, host, user and passwords are correct. From what I could see, it was all correct.
Thanks.
Regards,
Scott

POS Integration-POSDM, ERP, PI - using enterprise services-Connectivity Kit

Hello,
below you find a link to the official Connectivity Kit for Integration Scenario: POS Integration.
The integration scenario POS Integration is based on SAP ERP and SAP NetWeaver BI /SAP POS Data Management using enterprise services.
You will find an implementation Guide as well as descriptions of the enterprise services used.
https://wiki.sdn.sap.com/wiki/x/1ACFAQ
Best Regards,
Markus

Hi, Markus,
thank your for your input! very interesting!
I'm wondering which benefits this POS Integration over Enterprise Services has, comparing with the conventional IDoc transfer?
Regards
Rene

XI POS Integration

Hi,
Can anybody share the documents of SAP Retail - XI - POS(Point of Sale),Here POS is the third party system.
What would be the major difference between POS integration with other normal scenarios?
Thanks in advance,
Esha

Hi Esha,
POS is the microsoft product and i think it provides Microsoft Office Excel, text, HTML, XML, or e-mail. capabilites.
i checked below link, so Integrating this POS is same as other integrations.
http://www.microsoft.com/dynamics/pos/default.mspx
Regards,
Karna...

What is integration scenario & integration process in IR?

hi friends
1). can any one explain me about Integration scenario and Integration processes in "INTEGRATION REPOSITORY"?
2). why we need to use this IS & IP(integration scenario and integration processes?
3). what is advantage of using IS & IP(integration scenario and integration processes?
if you have any related links and documents please refer to me..................
Thanks in Advance
chinthapatla.bharat

Hi Bharat,
Integration Scenario
An integration scenario completely models the exchange of
messages for a collaborative process and provides an overview of the process flow.
It is overview of your whole integration scenario. In Integration Scenario each Swimlane represents a different business system. Mean you will have number of swimlanes as number of business system involved in your integration. Swimlane contains action. Actions are used for mentioning Inbound and outbound interfaces for the corresponding swimlane(business system).
Why we are using Integration Scenario?
We use integration scenario to genearate Integration Directory objects like Receiver Determination, Interface determination, Sender agreeement etc.
All XI content objects must be assigned to one or more integration scenarios (IS). Delivering XI-Content in the framework of an IS has the following advantages:
1. The IS provides you with a central point of access for all integration objects. This is necessary for semantic and technical integration and facilitates business-driven development.
2. The IS helps customers to understand the underlying business scenario of XI content objects.
3. The IS serves as a kick-start for the configuration of the content at the customer site. The aim is to minimize the configuration effort for the customer.
Please go through this link for further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/88/7adb7a030b424b8ef29b99461e52a8/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/frameset.htm
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
How Tou2026 Implement a High Volume Process Integration Scenario
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9056c89c-1a2e-2a10-8a99-eae154e74c4e
Integration Processes
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
the following case,u should consider to use integration process.
1.Control/Monitor the messages in XI
2. Collect/Merge the messages in XI
3. Split the messages in XI
4. To Multicast an Message
5. Send an Alert based on the very complex business logic
6. To integrate with cross component business process
Please go through this link for further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f7/d4653fd1d3b81ae10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
Some more additional links:
1. what is integration processes and integration scenario? and the functionality of these??
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
2. what is Actions?
An action represents a function within an application component that is not subdivided further. Actions subdivide the process flow of an integration scenario.
The vertical progression of actions from top to bottom corresponds to the logical process flow.
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
3. What is message interfaces in interface objects of IR?
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
4.what is fault message types exactly and functionality?
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Regards,
Vinod.

Problem While configuring Integrated Scenario

Hi,
While using Integrated Configuration in PI71, where our scenario establishes communication with a File(nfs) to File(nfs) adapter.
While testing in Integration Directory via Test Configuration, the scenario produces following error:
Problem occurred in receiver agreement for sender - BS1 to receiver -BS2,
namespace.OutboundInterfacename:: No standard agreement found for , BS1, , BS2,
namespacename, outboundinterfacename
where BS1, BS2 are sending and receiving Buisness systems respectively,
namespace - the namespace where both inbound and outbound service interfaces are configured.
Scenrio do not utilizes operation mapping.
I have gone though this thread Integrated configuration (PI 7.1) throws error when do 'Test Configuration' in sdn which states a similar problem but its still unsolved.
Moreover the scenario produces a required output file when it is tested by placing a test file in source destination.
Let me know if you have come across such situation and can provide the proper rationale for it.
Thanks for having a look.
Regards,
Nipun

@Abhishek Salvi,
Thanks that's very helpful information, Howsoever as I have mention, the dry test {where keeping the file in source destination and getting it generated at target destination} gives positive outcome, but while testing in RWB, the error "no receiver agreement could be found" still persist.
What's wrong while posting file to Adapter Engine from RWB, Is it incorrect to test this way?
@Abhishek Paul, When you say End to End do you refer with the same dry test way as what Salvi has also confirmed as the only way to test AAE scenarios, or you are about End to End monitoring tab of RWB?
Regards,
Nipun Shedhani

How to test the integrated configuration?

Hi Guys,
I have created a integrated scenarion and i want to know how can we test it from the RWB. I am getting the errors when i post the payload from the test tab to the adapter engine.
Thanks,
Srini

Hi Srinivas,
Integrated scenario can be run only for those adapters which lies on the adapter engine. This can be tested from end to end using sender channel onlybecause in RWB testing, u cant test it using the test tab of integration engine because that is used to put the message on the pipeline entry URL. But in case of integrated scenario , the message processing happens in the Advance adapter engine. The message doesnt pass from the Integration engine and So the message which are executed as integrated scenario are not available in the SXMB_MONI also.
This is a feature in PI 7.1. This enhance the performance and all the steps i.e
1) Receiver determinatiom
2) Interface determination
3) Sender agreement
4) receiver agreement
are present under a single object (Intrgrated scenario) which is cached in the adapter engine cache.
Hope this clear the Integrated scenario concept.
Thanks
Ajay

Building an Integration scenario with the Foundation Pack

From what I can see most people use AIA so they can make use of the available PIPS.
Has anybody used just the AIA Foundation pack to build integration scenarios?
We are experiencing many problems just trying to develope a simple end to end process and wondered if anyone had a simple Do's and DOn'ts, or Step by step guide to developing a scenario.
There is a lot of documentation and its very difficult to find the relevant information as it seems to be spread across multiple docs.
Stuart

We have made some small progress using the Foundation Pack 2.3.
I thought i'd share some of my experiences for others who are having problems and finding it difficult to get info.
We used the Artifcat Generater which creates the ABCS (BPEL process).
We found several issue:
1. In ABCS Requester (which calls an EBS implemented as an ESB process) - Partner Links did not work. We were getting Invalid Port Type errors (i will post the error message when i'm back in the office), but on close inspection everything looked ok but just did not work. The simple work around was to delete the Partner Link and re-enter it manually. I wasted days investigating this problem and ended up creating my own test BPEL process calling the EBS to prove it was configured correctly.
2. The XSL stylesheets could not be tested in JDEV. We ended up commenting out many of the generated XSL templates (generated by the Artifact Generater), the main culprit seems to be GetSenderNode template, haven't got to the bottom of the issue but ended up commenting out much of the code, specifically the aia.Getxxxxxx functions. Once I get time and find more information i'll post my findings.
Good luck.

XI testing POS Integration Scenario

Similar Messages

Maybe you are looking for