Xjc "results in empty target" error

Hi everybody.
I'm trying to complile the following very simple xsd with the xjb below. I keep getting "XPath evaluation of "/xsd:schema" results in empty target node".
Any idea? Thanks in advance, Agostino
xsd (just relevant part):
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <xsd:element name="myroot">
        <xsd:complexType>
            <xsd:sequence>
                <xsd:element name="int01" type="xsd:int" />
xjb (just relevant part):
<jaxb:bindings xmlns:jaxb="http://java.sun.com/xml/ns/jaxb"
               xmlns:xsd="http://www.w3c.org/2001/XMLSchema"
               version="1.0">
<jaxb:bindings schemaLocation="SQ.xsd" node="/xsd:schema">
    <jaxb:bindings node="//xsd:element[@name='int01']">Edited by: agostino75 on Aug 24, 2010 2:01 PM

Hello,
i think, when you use the Microsoft JAVA-VM, this error Message appears.
If you use the SUN JAVA VM this message doesnt pop up.
Try to install (if you havent done already) to install the SUN Java. If you already have the Installation activate under Internet-Options of Internet Explorer.
Best Regards
Helmut

Similar Messages

Error: The result is empty for XPath expression

hi gurus
Following is my input sample data to BPEL process.
<ItemList>
<Item>
<Name>Music System</Name>
<Id>525</Id>
<Item>
<Name>Fog Light</Name>
<Id>325</Id>
<Item>
<Name>Tyres</Name>
<Id>325</Id>
<Item>
<Name>Neon Light Ring</Name>
<Id>325</Id>
</Item>
</Item>
</Item>
</Item>
</ItemList>
Here <ItemList> contains <Item>.
And <Item> contains <Name>,<Id> & <Item> element itself.
i have created proper XSD for this.
But When i try to fetch any value then using Assign Activityits gives runtime following error.
Error in evaluate from expression at line "36".The result is empty for the XPATH expression: /ns1:ItemList/ns1:Item/ns1:Name
Any suggestion..?
thanks
/mishit

Here is my XSD.
<?xml version="1.0" encoding="windows-1252"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified" >
<xsd:element name="ItemList" type="ItemListType"/>
<xsd:element name="Total" type="TotalType"/>
<xsd:complexType name="ItemListType">
<xsd:sequence>
<xsd:element name="Item" type="ItemType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ItemType">
<xsd:sequence>
<xsd:element name="Name" type="xsd:string"/>
<xsd:element name="Id" type="xsd:string"/>
<xsd:element name="Item" type="ItemType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="TotalType">
<xsd:sequence>
<xsd:element name="TotalPrice" type="xsd:double"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
/mishit

Result is empty error in XPath

Hi,
I am getting the following error coming from an "Assign" activity that copies from a child element of one variable (child of message type = M1) to another variable (which is of type element same as that of that child of M1).
I am consistently getting the following error :
"Error in evaluate <from> expression. The result is empty for the XPath expression .
<<from element name>> "
Does anyone know why ?
Thanks

That message usually occurs when you point to a non-existing child. When you're using child nodes, you'll have to make sure you're pointing to the right node, for example by using [position() = bpws.getVariableData('idx'), or using an XSLT with a 'for each'.
Post the variable definition and the assign here, if you need more input.
Hth,
Mike

ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

Hi,
We try to install sccm 2012 serondary site in server 2012. It always failed.
I used the rereqchek tools to check system enviroment locally. All passed.
The primary site installed in server 2012. Both server had granted the administrator permission.
Anyone can help to check the below Configmgrprereq.log
ï»¿<01-16-2015 08:47:55> ********************************************
ï»¿<01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
ï»¿<01-16-2015 08:47:55> ********************************************
ï»¿<01-16-2015 08:47:55> Commandline :
"D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
ï»¿<01-16-2015 08:47:55> Check Type: Secondary site
Site Server: DPServer.ms.com,
SQL Server: DPServer.ms.com,
SQL Named Instance: ,
Install Folder: d:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: D:\SCCM2012\Source
ï»¿<01-16-2015 08:47:55> INFO: Executing prerequisite functions...
ï»¿<01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
ï»¿<01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
ï»¿<01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
the SQL Server and management point computers.
ï»¿<01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
ï»¿<01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
ï»¿<01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
ï»¿<01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
2008 SP2 or later.
ï»¿<01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
ï»¿<01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
ï»¿<01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
ï»¿<01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
ï»¿<01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
ï»¿<01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
ï»¿<01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
ï»¿<01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
ï»¿<01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
ï»¿<01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
ï»¿<01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
ï»¿<01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
ï»¿<01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
ï»¿<01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
ï»¿<01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
requirement. Configuration Manager requires at least Windows Installer version 4.5.
ï»¿<01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
ï»¿<01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
ï»¿<01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
ï»¿<01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
ï»¿<01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
ï»¿<01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
ï»¿<01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
ï»¿<01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
ï»¿<01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
ï»¿<01-16-2015 08:49:55> INFO: SQL Server named instance <>
ï»¿<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
ï»¿<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
ï»¿<01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
ï»¿<01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
ï»¿<01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
ï»¿<01-16-2015 08:50:05> INFO: .NET is installed
ï»¿<01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
ï»¿<01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
ï»¿<01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
ï»¿<01-16-2015 08:50:10> INFO: .NET is installed
ï»¿<01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
ï»¿<01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
ï»¿<01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
ï»¿<01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
ï»¿<01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
ï»¿<01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
ï»¿<01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
ï»¿<01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
ï»¿<01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
ï»¿<01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
ï»¿<01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
ï»¿<01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
ï»¿<01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
ï»¿<01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
ï»¿<01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
ï»¿<01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
ï»¿<01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
ï»¿<01-16-2015 08:53:44> INFO: LangID <409>
ï»¿<01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
ï»¿<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
ï»¿<01-16-2015 08:53:44> INFO: getaddrinfo returned success.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
ï»¿<01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
ï»¿<01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
ï»¿<01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
Server 2008 SP2 or later.
ï»¿<01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
ï»¿<01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
ï»¿<01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
requires IIS. Install IIS on the site system to continue setup.
ï»¿<01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
ï»¿<01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
ï»¿<01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
ï»¿<01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
ï»¿<01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
ï»¿<01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
ï»¿<01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
ï»¿<01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
ï»¿<01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
ï»¿<01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
ï»¿<01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
Windows Server 2003 or later.
ï»¿<01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
ï»¿<01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
ï»¿<01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
ï»¿<01-16-2015 08:55:57> ***************************************************
ï»¿<01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
ï»¿<01-16-2015 08:55:57> ***************************************************
ï»¿<01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
ï»¿<01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
ï»¿<01-16-2015 08:56:09> INFO: Setting registry values
ï»¿<01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

ï»¿<01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
on the SQL Server and management point computers.
Actually the administrative permission had been granted.

The result is empty for the XPath expression

Hi friends
Please, could anyone help-me with this issue? My BPEL process was working yesterday and stoped today...
I think I´m facing a namespace problem.
If I start my process using BPEL Console, filling the "HTML form" option, all works ok.
If my process is started by a call from another bpel process, my XPath query gives me an error, but the 2 received messages are "almost" egual:
Using BPEL Console:
<RejectionMessage>
<part name="message" >
<RejectedMessage ns1:BatchId="" ns1:PrimaryKey="" ns1:RejectionId="invalid_msg_processName_token1_token2_token3" ns1:BatchInfo="" >
<MessageHeader/>
<MessagePayload/>
<RejectionReason/>
</RejectedMessage>
</part>
</RejectionMessage>
Started by another BPEL Process:
<RejectionMessage>
<part name="message" >
<RejectedMessage RejectionId="INVALID_MSG_BatchTest_Read_20060418_101233_0463" BatchId="" BatchInfo="" PrimaryKey="" >
<MessageHeader/>
<MessagePayload> AgICAgICAgICAgICAgICAgIE1aIEpBSVJPUyAg MDYwMzA4MTAwMQ0K </MessagePayload>
<RejectionReason> ORABPEL-11008</RejectionReason>
</RejectedMessage>
</part>
</RejectionMessage>
XPath Query:
bpws:getVariableData('RejectionMessage','message','/ns2:RejectedMessage/@ns2:RejectionId')
In the first case, it works.
In the second case, it raises a "The result is empty for the XPath expression" error.
As you can see, this process is used as a "Rejection Handler" process: It implements the interface defined in RejectionMessage.wsdl
Could you help me?
Thanks in advance

Hi All
I find a workaround to the problem. I´m almost sure it is a bug in BPEL.
As you can see on my previous post, the diferences between the two messages is that the attributes have qualified names on one message and unqualified names on the other: ns1:BatchId, ns1:PrimaryKey...
The schema definition for this message (JCAErrorHandling.xsd) define that attribute names MUST be qualified (attributeFormDefault="qualified"). The problem is that the File Adapter sends the message with unqualified attribute names!!
So I edited JCAErrorHandling.xsd (<ORACLE_HOME>\integration\orabpel\system\xmllib\jca) file, changing it to attributeFormDefault="unqualified".
The correct solution is to fix File Adapter to send the message with qualified names, so I´m opening a Service Request at Oracle Metalink.
Thanks.

Assigning JMS message in BPEL: The result is empty for the XPath expression

Hi,
My project, an Oracle BPEL 11g project, is reading an XML payload from a JMS queue. I would like to transform the message and assign the elements of the messages to other variables. But when I am doing that in the "assign" step, it raises an error: Error in evaluate <from> expression at line "63". The result is empty for the XPath expression : "/ns2:publishProject/payload/Message".
Even though I can see the message payload in the Audit with all the values.
To me it looks like a name space issue, but I could not find out how to correct it. Any hint will be a big help. Please let me know if you want to check the .xsd for the message.

I publish a JMS message to a topic in one BPEL process and have another BPEL process read from the topic and start the flow. The problem I have is that the first process is writing fine to the topic, but the second process seems to be reading twice. I am seeing two instances of the second process in em.
Can anyone help? I am using JDev 11.1.1.1.0
Thanks

Empty taskoutcome error when Ontask comleted .

There is interesting fault on an BPEL task.
We set a tasks customizable propery true. Then
We want to write task outcome a log table when task completed.
Task assignment and routing policy is Single user.
But when this user choose task outcome and than press GO buton from worklist fallowing erro occurs.
How a task can be completed with empty outcome?
is this a bug?
We are using SOA suite 10.1.3.1
Thanks.
error message is
onMessage (443)
[2008/07/15 11:27:56] Waiting for message from "TaskService", operation is "onTaskCompleted".
[2008/07/17 12:10:56] Received "onTaskCompleted" callback from partner "TaskService" More...
-<BimGorevHumanTask_1_globalVariable>
</BimGorevHumanTask_1_globalVariable>
<onMessage>
<sequence>
Assign_HaraketiKapat (faulted)
[2008/07/17 12:10:56] Updated variable "haraketTamamla2DB_InputVariable"less
-<haraketTamamla2DB_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
-<InputParameters xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/WORKFLOW/BPEL_BIM_GOREV/HARAKET_TAMAMLA/">
<P_IS_ID>50216
</P_IS_ID>
<P_GONDERME_TARIHI/>
<P_SONRAKI_GONDERME_SEKLI/>
</InputParameters>
</part>
</haraketTamamla2DB_InputVariable>
[2008/07/17 12:10:56] Error in evaluate <from> expression at line "464". The result is empty for the XPath expression : "/task:task/task:systemAttributes/task:outcome".less
oracle.xml.parser.v2.XMLElement@3755c6
[2008/07/17 12:10:56] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. More...
-<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
<summary>
empty variable/expression result.
xpath variable/expression expression "/task:task/task:systemAttributes/task:outcome" is empty at line 464, when attempting reading/copying it.
Please make sure the variable/expression result "/task:task/task:systemAttributes/task:outcome" is not empty.
</summary>
</part>
</selectionFailure>

There is interesting fault on an BPEL task.
We set a tasks customizable propery true. Then
We want to write task outcome a log table when task completed.
Task assignment and routing policy is Single user.
But when this user choose task outcome and than press GO buton from worklist fallowing erro occurs.
How a task can be completed with empty outcome?
is this a bug?
We are using SOA suite 10.1.3.1
Thanks.
error message is
onMessage (443)
[2008/07/15 11:27:56] Waiting for message from "TaskService", operation is "onTaskCompleted".
[2008/07/17 12:10:56] Received "onTaskCompleted" callback from partner "TaskService" More...
-<BimGorevHumanTask_1_globalVariable>
</BimGorevHumanTask_1_globalVariable>
<onMessage>
<sequence>
Assign_HaraketiKapat (faulted)
[2008/07/17 12:10:56] Updated variable "haraketTamamla2DB_InputVariable"less
-<haraketTamamla2DB_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
-<InputParameters xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/WORKFLOW/BPEL_BIM_GOREV/HARAKET_TAMAMLA/">
<P_IS_ID>50216
</P_IS_ID>
<P_GONDERME_TARIHI/>
<P_SONRAKI_GONDERME_SEKLI/>
</InputParameters>
</part>
</haraketTamamla2DB_InputVariable>
[2008/07/17 12:10:56] Error in evaluate <from> expression at line "464". The result is empty for the XPath expression : "/task:task/task:systemAttributes/task:outcome".less
oracle.xml.parser.v2.XMLElement@3755c6
[2008/07/17 12:10:56] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. More...
-<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
<summary>
empty variable/expression result.
xpath variable/expression expression "/task:task/task:systemAttributes/task:outcome" is empty at line 464, when attempting reading/copying it.
Please make sure the variable/expression result "/task:task/task:systemAttributes/task:outcome" is not empty.
</summary>
</part>
</selectionFailure>

Creation of empty target group---URGENT!!!!!!!

Hi...
   I have a scenario in campaign automation where i need to create a target group automatically when ever a customer clicks on yes/no in the survey.
      I hope there is a standard workflow which creates target grooup.but do we need to have an empty target group so that who ever cliks on yes/no can form a target group.?
   When ever a Target group is created,i need to create LEAD automatically from it.How do i achieve this?is there a workflow or BADI? and if at all leads are created automatcally,how are they automatically assigned to Lead qualifier??
Regards,
Sanjana

hi sanjana
its easy as you just assign a new target group to existing or new profile set and do not assign any BP tp that target group
this way you have empty target group at your discretion.
best regards
ashish

Printing web pages on Tiger to HP LaserJets results in 79.01FE error

I'm cross-posting this question on both Apple's and HP's support forums. I've seen a lot of talk about this problem on various forums but no answers... and the answer has to be somewhere in Apple or HP, 'cause it's not a user-based error. I've spent the entirety of today doing extensive testing and checking -- am convinced there's a bug in the system somewhere that's outside of my control. HELP!
I've sworn by HP LaserJets for years as the pinnacle of laser printer technology... but, lately, I've been swearing at them because of this wretched 79.01FE error. I don't know what the cause of this problem is, but I can say unequivocally that our systems are up-to-date, so I don't think anyone can dismiss this as being fixable by a firmware update, driver udpate or whatnot (short of Apple or HP actually resolving the problem and issuing an update to whatever is causing the problem). Here's our configuration... if you check the specs, I think you'll see that we're entirely up-to-date as of this writing.
LaserJet 4MV
* no updatable firmware
* using JetDirect 25525B card with firmware A.08.49
LaserJet 4000TN
* firmware datecode: 980311 MOBY3.65
* using JetDirect 600N (J3111A) with firmware G.08.49
LaserJet 5100TN
* firmware datecode: 20040115 MB8.23
* using JetDirect 615N (J6057A) with firmware R.25.53
LaserJet 8150DN
* firmware datecode: 20041013 MB7.119
* using JetDirect 610N (J4169A) with firwmare L.25.53
workstations
* Mac OS X 10.4.6 with all latest Software Updates
* Safari 2.0.3
* Firefox 1.5.0.3
* LaserJet drivers 5.5.2 (the universal binary set released 04/20/06)
Printing certain web pages (www.cnn.com is one example) to the 5100TN or 8150DN results in the following error message on the LaserJet display panel, at which point the printer is locked up and has to be power cycled:
79.01FE
PRINTER ERROR
These pages print just fine to the 4MV and 4000TN, as well as to our Canon ColorPASS. I've seen a lot of talk about this error message on the web -- many people suggest that using Firefox is a viable workaround, but it does not work for us. We have a single Mac still running OS X 10.3.9, and it prints these pages without causing the error, as do any of our Windows XP Professional stations.
As you can see from my specs above, I've made sure all our printer and JetDirect firmwares are up-to-date. Additionally, I've tried using the recently-released universal binary print drivers (I've even deleted the printers from the printer list and recreated them). I've tried pretty much every trick in the book I can think of, and none of them have been successful.
ONLY Macs running OS X 10.4.x have this problem. So, yes, I know that Apple's software is a factor here. But, as the problem also ONLY occurs with certain LaserJets, then there's an HP connection in there somewhere as well. I find it really odd that the 4MV and 4000TN -- printers that are older than our 5100TN and 8150DN -- do NOT have this problem.
Does ANYONE have any idea how to workaround this problem, or if HP or Apple has any ideas about the cause and/or permanent fix for this issue? Having to restart our LaserJets multiple times a day is a BIG pain, and causing frustration and downtime for us as a company. I'd really like to see some headway on this issue, which has been plaguing us for months and, in my opinion, is actually occuring more frequently now than ever.
Charles "Chris" BaIley
Saint Joseph, Michigan

I'm using the same swear words as you. There are several threads about this problem - no answers.
I have a LaserJet 8100N and 8150DN, get the 79.01FE error on the 8150 from print outs from Safari, Firefox, and Preview, for only some sites/documents. CNN.com has become my test site, seems I can crash the printer 90% of the time with their home page at any given time in the day.
A summary of what I have tried:
- Upgraded the firmware to the latest for both the JetDirect card and the printer.
- Swapped the JetDirect cards between the 8100 and 8150.
- Swapped ram on the 8150 board.
- Disconnected external trays, bins, and removed extra RAM and hard drives from the 8150.
- Tried setting the JetDirect link and matching switch port link to 100FD, 10HD, 10FD, 100HD, as suggested by a poster.
- Tried having client's print to the printer through a XServer Print Server.
- Can consistently create the error from multiple systems running 10.3.9, 10.4.5, and 10.4.6 (didn't have an install base of 10.4 before 10.4.5).
Someone in the 'know' (which means they're likely not), said 10.4.7 will likely fix this. Being Apple has not even addressed that the problem exists (that I could find), I doubt the magic fix is a release away.
Apple's software is triggering something that Windows systems appears not to be, so one could say it's an Apple problem; but ulimately it's HP's software/hardware that is at fault in that it is allowing their system to crash from input alone.
G4/G5 XServes

Flex 4.5.1 Setting VideoPlayer source to null when it is already null results in a runtime error

I moved my project from Flex 4.1 to Flex 4.5.1 and I noticed that setting VideoPlayer source to null when it is already null results in a runtime error. The same thing applies to the case where you specified as a source url some invalid location (no video found there) and then you try to set the source to null.
Here is the error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at spark.components::VideoDisplay/cleanUpSource()[E:\dev\4.5.1\frameworks\projects\spark\src \spark\components\VideoDisplay.as:1956]
    at spark.components::VideoDisplay/setUpSource()[E:\dev\4.5.1\frameworks\projects\spark\src\s park\components\VideoDisplay.as:1609]
    at spark.components::VideoDisplay/set source()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\VideoDisplay.as:1073 ]
    at spark.components::VideoPlayer/set source()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\VideoPlayer.as:1362]
The problem is that in the VideoDisplay cleanUpSource function, in some of the cases there properties on the videoObject are modified like this:
videoPlayer.displayObject.visible = true;
without checking if displayObject is null which is done in the rest of the videoDisplay functions.
So when it reaches this line: videoPlayer.displayObject.visible = true; it results in a runtime error.
Is this supposed to work this way now ? I didn't have this problem on Flex 4.1. Not sure if it is a bug, but if it is please report it, I don't have the time right now to be checking in on this.
I fixed it by checking if the source is set, of course... (that won't help me in cases where I provide a wrong or missing video url by mistake.. so it is important to be fixed!)
F

Hi
I found the same error displaying video on flex !
in my simple code, i have :
videoInfoDataVideo.source = videoName;
the full error is :
TypeError: Error #1009: Il est impossible d'accéder à la propriété ou à la méthode d'une référence d'objet nul.
          at spark.components::VideoDisplay/cleanUpSource()[E:\dev\4.5.1\frameworks\projects\spark\src \spark\components\VideoDisplay.as:1956]
          at spark.components::VideoDisplay/setUpSource()[E:\dev\4.5.1\frameworks\projects\spark\src\s park\components\VideoDisplay.as:1609]
          at spark.components::VideoDisplay/set source()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\VideoDisplay.as:1073 ]
          at spark.components::VideoPlayer/set source()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\VideoPlayer.as:1362]
          at Function/item/private:updateVideo/anonymous/resultGetVideo()[C:\Users\randev\Adobe Flash Builder 4.5\visurbaCMS\src\item.mxml:800]
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at HTTPOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[E:\dev\4.5.1\frameworks\projects\rpc\src\mx\rpc\http\HTTPService.as:993]
          at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\4.5.1\frameworks\projects\rpc\src\mx\rpc\AbstractInvoker.as:318]
          at mx.rpc::Responder/result()[E:\dev\4.5.1\frameworks\projects\rpc\src\mx\rpc\Responder.as:5 6]
          at mx.rpc::AsyncRequest/acknowledge()[E:\dev\4.5.1\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:84]
          at DirectHTTPMessageResponder/completeHandler()[E:\dev\4.5.1\frameworks\projects\rpc\src\mx\ messaging\channels\DirectHTTPChannel.as:451]
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at flash.net::URLLoader/onComplete()
did you solve the problem or someone else?
Thanks

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

DVD DL burn issues - internal target error - fake hardware errors

I am receiving an error from DVD studio pro 3 and Toast 6 when burning DVD DL. The error only appears when burning Memorex and Verbatim discs (so far) using these applications. HP branded DVD DLs burnt fine from the same applications. Aside from the obvious, using only the HPs, has any one found a solution to this problem.
My error code is ....Formatting failed: internal device reports hardware error:internal target error 0x440x00...
I have tested this on other macs in my office and can repeat the error, so it leaves me to believe it is not actually hardware, but more over, likely firmware and or software upgrades. All equipment is less than 16 months old, intel chipped... I need a fix for our travel edit laptop - a Mac book pro.
Another thing that makes me conclude it isn't actually a hardware issue, the same discs that won't burn in Toast or DVDsp3, burn just fine using the finder's burning capabilties.
Thanks!

its been a few days since I posted my problem- i'm not surprised there hasn't been any movement on this topic... seems to be the status quo for all topics about this DVD DL problem..
For those with a similar problem, I'll review my work around for the situation.
Here is the low down review of my problem:
• the matSHITa DVD-R(UJ-846) will not burn DVD DLs from Toast 6 or DVD studio pro 3.
• the Mac says internal hardware failure or sometimes a session error - see previous posts for code
My work around:
• export disc image from DVD studio pro
• burn image as DVD-ROM (UDF) WITH simulation mode checked.
• worked for Memorex 8x DVD+R DLs, Verbatim 8x DVD+R DLs not at 8x speed, used 2x setting.
It takes a longer time for this route but has work consistently on about 15 DVD burns so far... I'll post again if this fails or stops working.
Again that is an intel chipped Mac Book Pro and iMac with the matSHITa DVD burner. Yes I capitalized that 4 letter segment on purpose.

Namespace problem The result is empty for the XPath expression

I have a problem with BPEL namespaces. The webservice that my BPEL process is using has changed namespaces (i.e. the java code package names changed and therefore the namespaces associated with the packages.)
Before there was only one namespace associated with this web services; now there are multiple namespaces.
I have changed the namespaces in my .bpel file; however I get the result is empty for XPath expression:
/nsxml0:getMailResponse/nsxml0:getMailReturn/nsxml1:mailOut
Any help appreciated...:(

hey b-o-s-t-o-n,
have your verified that the namespace import is correct, and with the right prefix
you xpath contains 2 namespace prefixes
/nsxml0:getMailResponse/nsxml0:getMailReturn/nsxml1:mailOut
so check the bpel file and maybe the wsdl that has been generated (that inclused the plnk extensions for your external service)
this is the most common issue ..
hth clemens

CAUFVD gets initialized result in dump with error Production ord not found

Hi All,
We want to make change of start date and end date of a production order via CO02 (Production order change). Based on these changes we want to update an existing a Purchasing Planned Order Start Dt and Finsih Dt (MD12)
We are using Enhancement component (PPCO0007) : Exit when saving production order
Within this exit we are using BAPI_PALNNEDORDER_CHANGE to update some other purchasing planned order dates.
The BAPI_PALNNEDORDER_CHANGE is executing succesfully however the production order structure (CAUFVD) gets initialized resulting in dump with error Production order not found
How can we update and save a purchased planned order and also the production order
Barada
Edited by: barada satapathy on Dec 8, 2010 9:14 AM

Hi Max,
Thanks for the reply...
The error details are as below:
Dump gets generated via program : (SAPLCOBT).
Exception condition ORDER_NOT_FOUND raised.
include = LCOBPU16.
Row No: = 21.
Module Type = (Function)
Module Name = CO_BT_ORDER_DET_TEMP
We also give brief details on what is happening:
My exit calls from Standard (LCOZVU01) :
CALL CUSTOMER-FUNCTION '001'
           EXPORTING
                header_imp = caufvd
           IMPORTING
                header_exp = caufvd_tmp
                no_update = answer.
*     Check if update of header necessary and allowed
      IF caufvd-aufnr EQ caufvd_tmp-aufnr AND
         caufvd       NE caufvd_tmp.
        PERFORM caufv_upd(saplcobh) USING caufvd_tmp.
      ENDIF
When BAPI for planned order is executed within the exit, the structure (caufvd) values are found refreshed. This structure is further updating the production order.

Firefox 5 upgrade results in the following error message presented under details. My system is configure for any type of LAN settings since I only have dail-up connection.

Installation of FireFox 5 after deleting FireFox 3.6v results in the following error message which I cannot resolve or fix. My system is configured with IE 8v and dial-up only.
"FIREFOX BROWSER 4.0v and 5.0v
The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
* Check the proxy settings to make sure that they are correct.
* Contact your network administrator to make sure the proxy server is working."

Please try to go to tools, options, advanced, networking, settings, set "no proxy", re-try. More details here: [[options window - advanced panel]].

Xjc "results in empty target" error

Similar Messages

Maybe you are looking for