Xls-export from Discoverer Plus by url-call
Hi,
I have the following Problem:
When I call Discoverer Desktop with a command line statement I am able to export a sheet as xls(etc.) to a specific path (for example ~/export=xls c:/...) without opening the Discoverer Desktop (/batch).
Now I have to do this with the Discoverer Plus. Is it possible and how i have to specify the parameters for that?
Regards
Christian Loebnau
In a word - no.
You can only use command-line in the desktop versions (ie: User / Desktop and Administrator).
Similar Messages
-
Problem opening excel files exported from Discoverer Plus 10.1.2.48.18
I can't open excel files (xls) exported from Discoverer Plus 10.1.2.48.18 when I enable macros. The application (Excel) hangs up.
Someone have any idea about this?
Thanks,
DiegoHi Meifang
I did some more research and found a document on MetaLink 250820.1 that talks about Discoverer not being able to call Excel if Discoverer is running via an IP address instead of a qualified domain name.
The article talks about making Discoverer a trusted site in the Internet Options of IE. Here's the relevant info from the posting:
Workaround for MS IE (if necessary):
1. Open a new MS IE browser
2. Navigate to: Tools | Internet Options Security where you will see the Trusted Sites icon (green icon with a check mark)
3. Click the Sites button
4. Add the following: http://IP:port/
(where IP, port are the location of where Discoverer server is running)
5. Click the OK button
6. Click the OK button again
On my own PC, I was having a similar problem and I was unable to get Excel to launch. In the end I did this:
1. Open a new MS IE browser
2. Navigate to: Tools | Internet Options | Security where you will see the Local Intranet icon (computer icon against a globe)
3. Click the Local Intranet button
4. Click the Sites button
5. Click the Advanced button
6. Add the following: http://IP/ or http://website
(where IP or website are the location of where Discoverer server is running)
7. Click the Add button
8. Click the OK button
9. Click the OK button again
10. Click the OK button a third time
With this done, I made sure that my Explorer settings were correct by doing the following to ensure that a couple of settings for the .xls & .html file types are unchecked:
1. Open Windows Explorer
2. Navigate to: Tools | Folder Options | File Types tab
3. Highlight the Extension XLS (or HTML)
4. Click the Advanced button
5. At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
Confirm Open after Download and Browse in same window
6. Click the OK button
7. Click the Apply button
8. Re-boot the PC
After I did this I was successfully able to get Excel to open from within Discoverer.
Best wishes
Michael -
Cannot Open Excel File after exporting from Disco Plus
Hi there,
I got a question from one user having issue with opening Excel file after exporting from Disco Plus.
The report has been using for a while and he is using Excel 2003 version and Discoverer 10g(10.1.2.2), he never got this kind of error before, just recently got error.
After exporting from Disco Plus he saved file on his desktop and when he tries to open the excel it says "Cannot be Accessed, can be corrupted...." but this is not from network drive since he saved file on local desktop or C drive.
Also not for all reports, only this particular report and only specific parameter, for example for parameter 2008 Feb opened successfully, but for2009 Feb he gets this error when trying to open excel.
i tried in excel 2007 also , i dont think this is Excel version error, am not sure.
Also after go live last week (we upgraded database from 9i to 10g) but i am not sure this causes ,since for one parameter working, for other parameter not working.
Actually we should get one window for Macro when we try to open excel, but he is not getting it seems.
Any ideas/thoughts on this would be greatly appreciated.
Thanks for your help
--skatRod,
Thanks for your quick response on this.
Yes, we can export to other formats as well, but actually exporting is working, after saving the file on our local desktop/drive and when we try to open we get this kind messages or we cannot open the file, we should get message window for Macro to enable/disable but for this report we are not getting this either,
Also this happens only for specific parameters,like i mentioned above it works I mean excel file opens for one set of parameters but for some other set of parameters cannot open.
For example :- when we enter FEB 2008 it works, if we enter FEB 2009 it won't open the file.
This is weird
I am still working on this issue, may be better to recreate the report again might be helpful,
Any ideas/comments/thoughts would be great
Thanks
Skat -
Discoverer Plus - Creating URL's with Multiple Dimension values
We are using the "Manage Links" feature in Discoverer Plus (10.1.2.2.0) to send dimension value names in a URL. As part of the "Manage Links" feature, the user is given the opportunity to choose which dimension values for the selected cells they want to include in the URL.
We are attempting to create URL's to drill from Discoverer Plus to more detailed Oracle Reports, which will use the dimension values in sql statements . One problem we noticed is for each dimension we can not select multiple values to send in the URL.
For example;
I have a URL I want to append selected dimension values from Discoverer Plus.
We have 2 dimensions each containing 5 dimension values. We use Discoverer Plus to filter down to 2 dimension values for each dimension to be included in our url.
Time: Nov2007, Dec2007
Division: USCCSLT, USCCLSY
Measure: Flux
URL:
https://corpdev.ffmb.com:11228/reports/rwservlet?RPT_TEST_XLS=<TIME:VALUE>, <DIV:VALUE>
When the link executed, the EXIT URL only contains the first dimension value for each dimension. I have included the exit URL below:
Result:
https://corpdev.ffmb.com:11228/reports/rwservlet?RPT_TEST_XLS=Nov2007,USCCSLT
It should contain Nov2007, Dec2007, USCCSLT, USCCLSY.
I've tried a variety to things in the Manage Links, but it always sends out just one dimension value.
According to the choices given in "Manage Links", it is not supposed to work this way.
I have a feeling I'm doing something wrong, because I don't see many posts here related to creating Discoverer Plus URL's.
If anyone encountered this and came up with a solution, I'd be interested to read your comments.
Thanks,
MichaelWhat version of Discoverer are you running? I'm assuming 10.1.2 but I would look at the 2 URL parameters
pluspopup and framedisplaystyle
From the Oracle Documentation:
When using popup in conjunction with framedisplaystyle=, the possible combinations are:
pluspopup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it.
pluspopup=true and framedisplaystyle=separate opens a new pop-up browser window and launches Discoverer Plus in a new applet window.
This combination launches three windows: the original browser window (i.e. Discoverer Connections page), the new browser window containing the Discoverer image, and the JFrame window containing the Discoverer Plus applet.
pluspopup=false and framedisplaystyle=embedded launches Discoverer Plus in the current browser window.
See if those help you out, if not let me know and we can dig into this further
Matt Topper
TUSC, The Oracle Experts
[email protected]
pluspopup=false and framedisplaystyle=separate launches Plus in a JFrame window. The current browser window contains the Discoverer image. -
SOS !!! Export from Discoverer to Excel problem
Hi everyone,
My reports, exported from Discoverer to Excel look quite different from what Discoverer format is. The date in Excel is shifted, column names are missing and report is broken into several tabs.
Any idea why it is happening?
Thanks lot,
SergeiWhen the users I support export to Excel they like to use the Export To Excel button in the menu. After they do that, they get a window asking if they want to enable or disable macros. I have them click Enable macros to get the same format as they see in Discoverer Plus.
If you get several tabs instead of one tab(and only one exists), I usually need to resave the workbook becuase it got corrupted (in my case anyway). If you want more control over how the workbook gets exported you can go to File--> Export... and they have some options on how the workbook gets exported.
I hope this helps. -
Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop
As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
BrajeshPretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.
-
Excel Export from Discoverer doesn't work
Hello ,
my customer has problems with exporting excel from discoverer.
It works until it says 'open excel', then she gets a white screen and nothing happens anymore, after that, she has to shut down the computer, because nothing works anymore.
And it only happens with a certain discoverer-user.
Another customer has the same problem with the same discoverer-user.
I don't have this problem with the same discoverer-user, everything works fine on my computer.
I don't know what problem this could be, and I don't know, where I must start searching ???
Can anybody help?
Thanks UtaHi Uta
It sounds like you might be Windows XP with Service Pack 2 installed. Microsoft, as always, does not quite tell you everything that they have changed. The big one this time is that Service Pack 2 sets a registry switch that by default prevents Internet Explorer from transferring applications between zones. To Microsoft, running something from a web server (Discoverer) and then running something on your PC (Excel) means running applications in two different zones. With that switch set, your PC cannot switch zones when running Internet Explorer and so cannot open Excel from within Discoverer Plus or Viewer.
To allow Discoverer Plus to call a local copy of Excel you need to reset the switch so that it one again allows zone switching, like the old XP. The switch should be set to 0.
Follow this workflow:
1. Open your registry and look for this setting:
[HKEY_LOCAL_MACHINE]/Software/Microsoft/Internet Explorer/Main/FeatureControl/FEATURE_ZONE_ELEVATION/iexplore
It is probably set to 1 and it should be set to 0
In the Windows environment:
1. Start | Run | Regedit (to open the registry)
2. Locate the following key path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION\iexplore.exe
3. Change the value of this setting from 1 to 0 and close the registry editor
4. Ensure that the following settings for the .xls & .xlsx file types are unchecked:
a) Open Windows Explorer
b) Goto Tools | Folder Options | File Types tab
c) Select the Extension XLS for Excel 2003 (or XLSX for Excel 2007) then click on the Advanced button
d) At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
'Confirm Open after Download' and 'Browse in same window'
5. Click the OK button
6. Click the Apply button and close Explorer
7. Re-boot the PC
Let me know if this helps
Best wishes
Michael -
How to open a defult workbook from Discoverer Plus
Hi all,
Is it possible in Discoverer Plus for a user to open a pre defined worksheet in a workbook when he logs in without having to select the workbook and then select the worksheet?
Please advise how to achive this.
Any help will be greatly appreciated.
Thank you all.
YjkHi Yjk
This is possible but you will have to alter the URL call to do it and add the workbook name to the end of the URL.
You can use either the names of workbooks and worksheet or unique IDs of workbooks and worksheets. Using unique IDs is easier and helps avoid encoding problems with long names. Unique IDs are language independent. The following are the URL parameters to use while working with workbooks and worksheets.
Discoverer Plus Relational:
Workbooks:
opendbid=<workbook ID>
opendbname=<workbook name>
Worksheets:
sheetid=<worksheet ID>
sheet=<worksheet name>
Discoverer Viewer:
Workbook:
wbk=<workbook ID>
wb=<workbook name>
Worksheet:
wsk=<worksheet ID>
ws=<worksheet name>
Discoverer OLAP:
Workbooks:
workbookname=<workbookname>
Worksheets:
sheet=<worksheet name>
Note: Discoverer Plus OLAP uses only workbook and worksheet names.
Examples below:
How to Find the Unique IDs of Workbooks and Worksheets
To find the unique ID of a workbook, use thie workflow:
1. Launch the Open Workbook from Database wizard
2. Right-click the workbook name
3. Select Properties.
The value of the Identifier field indicates the unique ID of the workbook.
Alternatively, when the workbook is open, select File | Workbook Properties.
To find the unique ID of a worksheet, use this workflow:
1. With the worksheet open, select Edit | Worksheet Properties
2. The Worksheet Properties dialog box opens.
3. Click the General tab.
The value of the Identifier field indicates the unique ID of the worksheet.
The following URL starts Discoverer Viewer and opens a worksheet with the unique ID "156", which is present in the workbook whose unique ID is "MONTHLY_SALES". The connection ID used is "cf_a101".
http://<machine.domain>:<port>/discoverer/viewer?cn=cf_a101&wbk=MONTHLY_SALES&wsk=156
If the connection that is used here is a private connection, the user will be prompted for the password.
In Plus, the same command is:
http://<machine.domain>:<port>/discoverer/plus?cn=cf_a101&opendbname=MONTHLY_SALES&sheet=156
Does this help?
Regards
Michael -
Problem with opening discoverer plus by URL
Hi Gurus,
I am opening the discoverer plus worksheet using a URL from another web page to skip the connections page. Heres the hyperlink, I am using for the same
http://burs52:7779/discoverer/plus?&_plus=true&nlsl=en-us&cn=cf_a122&lookandfeelname=system&workbooksource=Database
This would directly bring the 'Open workbook from Database' page with list of workbooks for the particular connection, but the problem is that every time it opens the discoverer plus it would automatically open the connection page(http://burs52:7779/discoverer/plus?) in the parent window(webpage with the hyperlink). This would confuse the end user.
Is it possible to avoid this? i.e keep the parent page unchaged
Thanks in advance
NJWhat version of Discoverer are you running? I'm assuming 10.1.2 but I would look at the 2 URL parameters
pluspopup and framedisplaystyle
From the Oracle Documentation:
When using popup in conjunction with framedisplaystyle=, the possible combinations are:
pluspopup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it.
pluspopup=true and framedisplaystyle=separate opens a new pop-up browser window and launches Discoverer Plus in a new applet window.
This combination launches three windows: the original browser window (i.e. Discoverer Connections page), the new browser window containing the Discoverer image, and the JFrame window containing the Discoverer Plus applet.
pluspopup=false and framedisplaystyle=embedded launches Discoverer Plus in the current browser window.
See if those help you out, if not let me know and we can dig into this further
Matt Topper
TUSC, The Oracle Experts
[email protected]
pluspopup=false and framedisplaystyle=separate launches Plus in a JFrame window. The current browser window contains the Discoverer image. -
Export from Discoverer to Excel more than 65K rows
Hi
I need to export data from discoverer to excel, in some cases it is more than 65K rows, does any body know if the file can be split in multiple files o worksheets in Excel?
Any help will be appreciate
Thanks
VladimirRuss
The short answer is I didn't know, as in any instance where my end users have wanted to extract large amounts of data they have done it from one sheet, I expected that Discoverer would just create the extra sheets for both but I wanted to know for sure, so I did a test.
I created a Disco workbook with two worksheets in it, the first one I called Monthly and it had 119,409 rows in it, the second I called Weekly and it had 299,775.
The first time I did the export I did it by hitting the Excel icon on the toolbar, it therefore only extracted the first worksheet (Monthly), when I opened the ensuing Excel file it had two worksheets in it, one called Monthly, the other called Monthly_1 and as expected, between the two sheets the had exactly the same number of fields as in the original disco sheet.
I then redid the extract going through the menu and chossing extract entire workbook, Discoverer then re-extracted the sheets. In the Excel file this time I had the same two monthly sheets as before and this time I also had weekly sheets, five of them. So I ended up with an Excel file with seven sheets containing all of the original data.
Cheers
Melanie -
Emailing from discoverer plus 10g
Hi,
Please help on the ff question posed to me from our client who just had Discoverer Plus 10g implemented at their sites.
1. The old vs 3.1 desktop had the ability to send a report in an e-mail attachment to many recipients as a .dis file. This feature is no longer available. Is there plans to include this in future releases?
2. The old 3.1 vs was also able to save and open reports from the file system. This is no longer available on plus 10g. Is there plans to also include this feature in newer releases of plus.
pls advise.
thanks
salihaHi Saliha
The new 10g Desktop still has the email feature, as does the 10g Viewer tool. I doubt very much that Oracle will add emailing to Plus because Viewer is where the users are supposed to run their reports. Plus is a developer tool so I think you will be out of luck. Many folks that I go to initially say they don't like Viewer but that is because they have no idea what it can do. After I have given training every company so far tell me they will be using Viewer for end users (viewers), with Plus being reserved only for the report writers.
As for saving to the file system from Plus, as you say this does not exist. Oracle do have this under consideration. I thought it was scheduled for the next release but I don't think it made it. We'll just have to wait and see. Like you, I would like to see it.
Sorry about this, please don't shoot the messenger :-)
Best wishes
Michael -
Link from Discoverer (Plus/Viewer) to Reports?
Is it possible to create a link from a cell on a Discoverer sheet to an Oracle Reports report? I.e. doubleclick on cell value "A" and run report with "A" as parameter?
Regards,
-Haakon-Access links should be like this.
Discoverer Plus - http://<your domain>:<port>/discoverer/plus
Discoverer Viewer - http://<your domain>:<port>/discoverer/viewer
<port> default port is 7778.
Try now.
Your Administrator is responsible for you to provide the links for both. Check with him. -
0 displaying as 0.000000 after the XLS Export from portal
Hi BW Gurus,
Greetings for the NEW YEAR2009 !
I have a problem .Here it goes...........
After i run a report in my portal the report is displying 0 .After i do an XLS Export to the excel . the 0 disply as 0.000000 .After i did some settiings in the excel by formatting cells in the NUMbers tab as decimal points is 1 and 1000 separator as checked . it works fine . and this is workiong for only some of the reports .
so my out put comes as : 0.000000 as 0,0 and 1 as 1,0
For some of the reports , 0 displaying as 0 and some times 0.000000 with two unusual behaviuor after the XLS export .
Kindly help me out if i have todo some thing like settings in excel settings .
Kindly reply ASAP and points are assigned 100% .
Regards
SherwinHi Sherwin,
Please, first, take a look in the following notes, probably the problem in the Excel formatting options.
442987 - Decimal places/rounding units of measure
866505 - Unwanted rounding of units T006-ANDEC
If the notes are not useful, please check whether note 1169124 could help you.
1169124 - Currency style in BEx Analyzer
I hope it helps.
Regards,
Daniel -
Export issue in discoverer plus (10G)
I'm unable to export the report result into either excel or text file from discoverer plus.
Error message is "Operation Failed".
Please help me in resolving this in discoverer 10G.Hi, I happened to come across Murali's thread here while searching for something else.
If anyone is interested, the resolution was MetaLink Note 401600.1 (Exporting To Xls/Cvs/Txt Formats With Discoverer 10g (10.1.2) Plus or Viewer Fails With 'Error Operation Failed').
It involved deleting dc* files from the temporary directory we have identified for exporting temporary files. The temporary directory was full.
Once the dc* files were deleted, it resolved the export to XLS from Discoverer Plus issue for us this time. -
Export to EXCEL 4m Discoverer Plus/Viewer doesnt retain Header Formatting ?
Hi,
I am trying to export reports from Discoverer Plus and Viewer to XCEL
but the Header's Formatting like Bold and Background Color etc are
not being exported as seen in Plus.
Could you please advice on how to make this happen.
Thanks,
VJi tried this option..but the problem is as follows
Excel Export:+ The header comes like this
Report Name Company Name Date : 22-APR-10 Page: 1
Column1 Column2 Column3 Column4 Column5 Column6 Column7
122124 9752 7 METRO NORTH 716 MIDWEST REGION DODGE CITY/ANDERSON TOYOT LEXUS OF ROCKFORD
122124 9752 7 METRO NORTH 716 MIDWEST REGION DODGE CITY/ANDERSON TOYOT LEXUS OF ROCKFORD
122124 9752 7 METRO NORTH 716 MIDWEST REGION DODGE CITY/ANDERSON TOYOT LEXUS OF ROCKFORD
HTML Export:+ The header comes like this
Report Name Company Name
Date : 22-APR-10 Page: 1
Column1 Column2 Column3 Column4 Column5 Column6 Column7
122124 9752 7 METRO NORTH 716 MIDWEST REGION DODGE CITY/ANDERSON TOYOT LEXUS OF ROCKFORD
122124 9752 7 METRO NORTH 716 MIDWEST REGION DODGE CITY/ANDERSON TOYOT LEXUS OF ROCKFORD
i.e the export to HTML is retaining the format but it is putting the heading into multiple cells..there by making it look bad when opened in Excel.
Wheras in EXCEL export it doesnot retain formatting like Bold,etc it merges all the cells of teh first row and is putting it there which is much better to view.
Is there anything we can do about it ??
Thanks
Maybe you are looking for
-
Hi my name is Dustin, I am new to labview and teststand... I am trying to right multiple arrays of data to a single xml file. I can do this with a cluster but I have to create a variable for each of those arrays (21 arrays) and I was hoping to use th
-
Speed of animation fluctuates based on java cache..
Hi everyone, It seems I am experiencing a rather weird problem. In my app I am having a small animation on a BufferedImage using the swingx.Timer class. The problem is that sometimes the animation runs very slow (I get a feeling of the computer strug
-
Ipod does not appear in iTunes
My ipod does not appear in iTunes after it was installed. Have tried all the troubleshooting and it does not work.
-
I simply want to updgrade. Creating a boot from the app store version of ML provide the above error. I do not want to lose data for an upgrade, so do not want to follow this fix http://osxdaily.com/2011/06/30/deleting-the-mac-os-x-10-7-lion-recover
-
Hi All, I am currently completing a project for college which involves the creation of a domain, OU's, GPO's etc within a virtual environment. I am using Windows Server 2008 Enterprise running this on VMware however after having completed and tested