XMII 11.5 SR02 b63 Logic Editor won't run

One of our QA members is having problems running the Business Logic Editor in xMII. He and another QA person have the same setup:
xMII 11.5 SR02 b63
JDK/JRE 1.4.2_07 and 1.3.something
same IIS
The second QA person has no problem running the BLE, but the first one describes this behavior:
1. Open XMii and log in.
2. Click Business Logic Services > Logic Editor. A Java Web Start
1.4.2_07 window opens that indicates XMII SAP is Downloading Java
libraries descriptor (0 remaining) with a flashing status bar. It
stays here for 20 to 30 minutes before the application actually can be
started up. At that point as long as I don/t close XMII then I can use
the Logic Editor with no problem. If I close it down (i.e. close the
browser) then the same problem occurs the next time I try to start the
Logic Editor.
Where could I begin looking to debug this?
-tim

Hi Tim,
try to open the Java Web Start program (should be in C:\Program Files\Java\j2re1.4.2_07\javaws\javaws.exe), go to File > Preferences and under the 'Proxies' section in the 'General' tab, select 'None'.
Then close all open browser windows and try again...
Note that disabling proxy servers in the Java Web Start tool will not affect normal Java Applets, which are handled by the Java browser plugin which comes with its own proxy configuration screen. If you company uses a proxy between its LAN and the net, the above setting will stop your uses from running any Java Web Start applications, such as BLE, but not very many people use these anyways, so the impact should be minimal.
Good luck,
Sascha
P.S. If your users also have the JDK, then the javaws.exe binary is also found in C:\j2sdk1.4.2_07\jre\javaws.
Message was edited by:
Sascha Wenninger

Similar Messages

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.
I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it. What do I do now?

Niel: Thanks.
For others benefit, here is what happened.
I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder. It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works. Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update.
Solution: I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm.

Collection Editor won't run

ZAM 7.0. The collection editor refuses to run when either a scheduled
inventory scan runs or when I force a scan from the Web Console on any
machine. It will however run if I run Cclient.exe scannow:edit direct
from the client, or if I place the collection client in Diagnostic mode
and select File, 'Scan/Edit Now' from the toolbar.
I have also checked out TID 10099546 which suggests to check the hostname
in cps.ini and this is not the problem either, as os verified by the fact
that it runs manually and stores the editable field data correctly.
Thanks
Lenny

Hmmm... OK - then let's do this: Run an ordinary collection as a standard
user (set up to run the editor after the collection), and as soon as you
get the failure dialog ("Cannot open the selected inventory!"), don't
click "OK". Instead, open Regedit and let's look at something.
In Regedit, go to HKey_Local_Machine\Software\Tally Systems
Corp.\TSCensus\CollectionClient and look at the Wifname value. It SHOULD
at this point be a fully pathed WIF name, and it SHOULD be pointing at
your InboxCC directory.
Do standard users also have rights to change this registry key? They
should; any thing in HKey_Local_Machine\Software\Tally Systems
Corp.\TSCensus may be changed by some part of ZAM.
-- Tim --
> I have checked the access rights and all users have full access to the
> InboxCC directory. I browsed to the directory before running a manual
scan
> using cclinet.exe scannow:edit. I watched the .WIB and .WIF files
create.
> The .WIB file was around 180k and the .WIF file 1k. At the end of the
scan
> the .WIF file increased size to 180K and the .WIB file disappeared. This
> behaviour was the same logged in as a bog standard user and the
> administrator, except I then get the error when logged in as the user,
but
> see the collection editor screen display logged in as administrator.
>
> We are running Version 7.00 SP1 IR12, which was installed from a clean
> install of version 7.00 followed by installing IR 12 before anything was
> configured.
>
> Thanks
>
> Lenny
>
>
>
> >>> On 09 May 2007 at 18:40, in message
> <XHn0i.6301$%[email protected]>,
TDH<[email protected]>
> wrote:
> > That sounds as if either (1) the WIF file isn't being generated in
your
> > InboxCC directory, or (2) the Collector isn't finished writing the
file
> > before the Collection Editor starts to open it. The latter case being
> > pretty unlikely, I suspect that the former is true, especially since
> > admin
> > users don't see the issue.
> >
> > Doublecheck to see that all users (even bog-standard ones) have full
> > rights to all file access in the InboxCC directory on every machine
> > scanned. The Collector is usually run "as" the logged-in user - under
> > their account, with their rights, and it MUST be able to delete and
> > create
> > and rewrite files within ...\InboxCC.
> >
> > If that doesn't take care of this problem (and even if it does, it
> > wouldn't hurt to know)... what patch (IR) level are you running?
> >
> > -- Tim --
> >
> >
> >> I deleted my custom Option set to just get the default option set
> > working.
> >> The probelm I now have is that on some machines, during the daily
> >> afternoon scheduled scan, machines generate the error 'Cannot Open
the
> >> Selected Inventory!' in a window titled 'Zenworks Asset Management
> >> Collection Editor'. Yes the '!' is part of the error. Can't find
> >> anything on this error anywhere. I only have 1 collection server and
the
>
> >
> >> error is generated on some local machines and some across the WAN,
> >> although not all machines. Interestingly enough it seems to run on
all
> >> the IT user PC's. Something to do with being in the Power Users or
> >> Administrators groups on the local Win2000 PC's perhaps?
> >>
> >> Any further ideas greatly appreciated. Some non working machines I
have
>
> >
> >> tested can resolve the inventory collection machine specified in the
> >> cps.ini file.
> >>
> >> Lenny
> >>

Xml manipulation using xMII Logic Editor

Hi Friends,
I have an input xml file :-
<?xml version="1.0" encoding="UTF-8"?>
<CampaignDetails>
     <CampaignID> 1</CampaignID>
     <CampaignID> 2</CampaignID>
     <CampaignID> 3</CampaignID>
     <StartTime CampaignID="1"> st1</StartTime>
     <StartTime CampaignID="2"> st2</StartTime>
     <StartTime CampaignID="3"> st3</StartTime>
     <EndTime CampaignID="1">et1</EndTime>
     <EndTime CampaignID="2">et2</EndTime>
     <EndTime CampaignID="3">et3</EndTime>
     <Description CampaignID="1"> This is Campaign 1</Description>
     <Description CampaignID="2"> This is Campaign 2</Description>
     <Description CampaignID="3"> This is Campaign 3</Description>
</CampaignDetails>
I want to manipulate this xml file as per the following :-
<?xml version="1.0" encoding="UTF-8"?>
<CampaignDetails>
<Campaign>
     <ID>1</ID>
     <Description> This is campaign 1</Description>
     <StartTime> st1</StartTime>
     <EndTime> et1</EndTime>
</Campaign>
<Campaign>
     <ID>1</ID>
     <Description> This is campaign 2</Description>
     <StartTime> st2</StartTime>
     <EndTime> et2</EndTime>
</Campaign>
<Campaign>
     <ID>1</ID>
     <Description> This is campaign 3</Description>
     <StartTime> st3</StartTime>
     <EndTime> et3</EndTime>
</Campaign>
</CampaignDetails>
Can anybody please tell me as to how to proceed using xMII Logic Editor?? I have tried a lot but I am failing.
And Please explain the steps in detail.
Thanks in Advance.
Lipsa.

Hi Rick,
I tried but I am getting the following ouput.
<?xml version="1.0" encoding="UTF-8"?><Location><CampaignDetails> <Campaign> <ID>1</ID> <Description> This is Campaign 1</Description> <StartTime> st1</StartTime> <EndTime>et1</EndTime> </Campaign> <Campaign> <ID/> <Description/> <StartTime/> <EndTime/> </Campaign> </CampaignDetails><CampaignDetails> <Campaign> <ID>2</ID> <Description> This is Campaign 2</Description> <StartTime> st2</StartTime> <EndTime>et2</EndTime> </Campaign> <Campaign> <ID/> <Description/> <StartTime/> <EndTime/> </Campaign> </CampaignDetails><CampaignDetails> <Campaign> <ID>3</ID> <Description> This is Campaign 3</Description> <StartTime> st3</StartTime> <EndTime>et3</EndTime> </Campaign> <Campaign> <ID/> <Description/> <StartTime/> <EndTime/> </Campaign> </CampaignDetails><CampaignDetails> <Campaign> <ID>4</ID> <Description> This is Campaign 4</Description> <StartTime>st4</StartTime> <EndTime>et4</EndTime> </Campaign> <Campaign> <ID/> <Description/> <StartTime/> <EndTime/> </Campaign> </CampaignDetails></Location>
And not the desirable one.
Please help me out.
Output has to be in the following way:-
<?xml version="1.0" encoding="UTF-8"?>
<Location>
     <CampaignDetails>
          <Campaign>
               <ID>1</ID>
               <Description> This is Campaign 1</Description>
               <StartTime> st1</StartTime>
               <EndTime>et1</EndTime>
          </Campaign>
          <Campaign>
               <ID>2</ID>
               <Description> This is Campaign 2</Description>
               <StartTime> st2</StartTime>
               <EndTime>et2</EndTime>
          </Campaign>
     </CampaignDetails>
     <CampaignDetails>
          <Campaign>
               <ID>3</ID>
               <Description> This is Campaign 3</Description>
               <StartTime> st3</StartTime>
               <EndTime>et3</EndTime>
          </Campaign>
          <Campaign>
               <ID>4</ID>
               <Description> This is Campaign 4</Description>
               <StartTime> st4</StartTime>
               <EndTime>et4</EndTime>
          </Campaign>
     </CampaignDetails>
</Location>
and the input is :
<?xml version="1.0" encoding="UTF-8"?>
<CampaignDetails>
     <CampaignID> 1</CampaignID>
     <CampaignID> 2</CampaignID>
     <CampaignID> 3</CampaignID>
     <CampaignID>4</CampaignID>
     <StartTime CampaignID="1"> st1</StartTime>
     <StartTime CampaignID="2"> st2</StartTime>
     <StartTime CampaignID="3"> st3</StartTime>
     <StartTime CampaignID="4">st4</StartTime>
     <EndTime CampaignID="1">et1</EndTime>
     <EndTime CampaignID="2">et2</EndTime>
     <EndTime CampaignID="3">et3</EndTime>
     <EndTime CampaignID="4">et4</EndTime>
     <Description CampaignID="1"> This is Campaign 1</Description>
     <Description CampaignID="2"> This is Campaign 2</Description>
     <Description CampaignID="3"> This is Campaign 3</Description>
     <Description CampaignID="4"> This is Campaign 4</Description>
</CampaignDetails>
Please help.
Thanks in Advance,
Lipsa.

Error in Logic Editor

Hi,
I want to create transactions using Logic editor of SAP xMII.
Whenever i click on 'Link' option it gives error saying 'Exception has been occured'
null.
Same is case when i work on existing transacttions.
Can anyone please help me in resolving this.
Thanks in advance
Regards,
Shalaka

Shalaka,
Can you please confirm the version of xMII you are using? Also, can you tell me which version of the Sun JDK you are running on both the xMII server and the workstation you are working with the Logic Editor?
Regards,
Michael Teti

Problem with Business Logic Services Logic Editor

Hi,
I am trying to go to Logic Editor under Business Logic Services. I'm getting error that "Unable to launch xMII"
Is there any java related problem in my machine?
Regards,
Amalesh

Amalesh,
What version of xMII are you using 12.0 by chance. If so goto the Java Web Start -> File -> Preferences -> and set your proxy to "None". I would not recommend reinstalling Java as this will not solve your problem and if you are on xMII 12.0, the recommended version is 1.4.2_13 as a minimum.
Regards,
Erik

How to Display Multiple Rows in Business Logic Editor

Hi Friends, I took the standard BAPI: BAPI_MATERIAL_GETLIST and followed the SAP- xMII documentation. It is not showing any records. Does any one have good example. Please let me know.
If I run the same BAPI from R3 system, it is showing 7 records.
Can I display the data in Business Logic editor? Please help.

Hi Dilip
I have gone through your post and I think that the info provided by yu is not sufficent to answer yur question exactly but i would suggest yu the following solutions :-
1. It may be the case that yu are not looping on the Response XML from the BAPI. You need to loop on the repeating node of the Response XML of the BAPI and on each loop yu need to append the record read to a xMII Output XML document using Row structure. Finally Yu can assign the document to the Output variable.
2. Check for the type of Output Variable. I guess that it's String type. In that case, convert it to xml type.
Hope it helps.
Amit

Not able to login in CMS Logic editor

Hi,
I'm using older version of sap xMII 11.0. I'm not able to login CMS Logic editor using my user name and password but able to login to the other xMII pages. Do we need to modify any system properties?
regards
Bala

I think you should talk to your colleague who messed up the server environment: Changing Lighthammer Home in BLS (xMII 11.5)
Once it is solved I assume you'll be able to login as well.

Error while calling BAPI in BLS(Logic Editor)

Hi all,
I am using a RFC(BAPI_OBJCL_CHANGE) in XMLL logic editor. I have configured in SAP JCO interface. While executing that transaction, it shows error like ACTION FAILED: End Action SAPJCOInterface_0 : (SAP JCO Interface). But, when I try with other BAPI's its working fine. At the same time when I execute the RFC(BAPI_OBJCL_CHANGE) in SAP logon its working fine. What could be the problem?
Help in this regard, it's urgent.
Thanks & Regards,
Hemalatha

Did you try to execute the BAPI from SAP in BAPI Explorer? If you are not familiar with the behavior of a particular BAPI, that is a good place to do testing. By using BAPI Explorer, you have bypassed any impact xMII may have on the execution of the BAPI.
Once you have the parameters set correctly there and the BAPI executes without error, then try it in xMII. A couple of other things to keep in mind. SAP often adds leading zeroes to various ID's (material, production order, batch, etc.). BAPI's often do not. So make sure you know the configuration of the object and check to make sure you have leading zeroes where appropriate.
Hope this helps,
Mike
Also make sure you check the Automatically Commit Transaction since you are performing an action upon SAP rather than simply retrieving information.
Edited by: Michael Appleby on Feb 11, 2008 4:17 PM

Photoshop Elements 9 Editor Won't Open

I have PSE 9, and the editor won't open (organizer will, but not editor). When I click "Edit" from the welcome screen, the welcome screen just disappears and nothing happens. I tried accessing the editor directly from the program files folder, and again, nothing happens . I tried right-clicking on photos and telling them to open in PSE. Nothing happens. No error messages or anything-- it just won't open.
It worked fine on my old computer in Windows 7, but I recently got a new computer with Windows 8. I tried running in compatibility mode for Windows 7, but that doesn't solve the problem. I also tried uninstalling and re-installing.
Please help me-- this is driving me nuts! Thanks.

Yes, but the odds are that you chose the logical file instead of the correct one. The actual editor is hidden away inside the support files folder for PSE 13 and the file at the top level of the Applications>PSE 13 folder is just an alias to the Welcome Screen. You really want this one:

Error opening a transaction in Logic Editor

Hi,
Using 11.5 SR3.
I have a transaction which some 20 sequences and 30 action blocks. I configured it as a listener. For some strange reason, I just cannot open the transaction in the Logic editor.
Another issue, though not sure if its related to the same thing is that some of the transactions say 'executing' even though the last sequence in the transaction is executed (the last sequence is a file write and the file is already created) when running from the Logic Editor. I also feel that the performance of the transaction execution has gone down recently. Not sure if all these issues are related or each one is a separate issue.
Any clues from the gurus?
Ravi.

Hi Ravi,
Found a SAP Note on the transaction loading issue.
Note: 960362
Title: Large Transactions can crash server
URL: [Click Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_xap/~form/handler]
It mentions increasing the heap size as an option.
Cheers,
Jai.
Edited by: Jai Tamhane on Feb 7, 2008 12:23 PM

Error while executing transaction in logic editor

Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!

U better try to clear the cache enteries and try this.it may help

Captivate 5.5 skin editor won't open

I'm working in Captivate 5.5, and the Skin Editor won't open, either from the Project menu or with Shift+F11. Any idea what's causing that? Is there another way to get at the Skin Editor, such as through the Publish dialog box? I couldn't find another way.
-Stuart

Hi Stuart
At any point have you had a second monitor attached? If so, it's quite possible that the dialog is indeed opening, but was last opened on the second monitor. In that case you need to either make your resolution large enough so that you see the dialog sitting in the odd location or re-connect the second monitor so you may then view the dialog and drag it back to the visible area of the screen.
Cheers... Rick

Line numbers in Script Logic editor

Hi everybody,
when using the default Script Logic editor in BPC NW I can not see any Line Numbers (or Column Numbers) in the edited script.
When an error is detected by the system after validating the script, the error message sometimes refers to a certain Line Number where the error occured.
Is there a better way than manually counting the lines from the top (which can be quite a task when editing, say 500 lines) ?
Do I miss something here or are you all using alternative editors ?
Please give me some input.
Regards.
Wolfgang

Hi Nilanjan,
thanks for the quick answer.
That would mean that I always need to switch from BPC frontend Script Editor into BW and start a transacion and program there. I would have hoped, that simole line numbers would be a standard feature in the BPC frontend editor itself. Nevertheless...
Best regards.
Wolfgang

Elements 7 editor won't open

I have elements 7 and the editor won't load. It gets as far as the twain menu items loading and aborts. I tried holding Ctrl shift alt as suggested in another post but no luck. I am using windows 8. I had this problem before and an adobe assistant helped me out but I guess I don't qualify for that type of assistance this time around.

Try deleting the Editor's preferences, step 1 of this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes
If that doesn't help, try the other steps.

XMII 11.5 SR02 b63 Logic Editor won't run

Similar Messages

Maybe you are looking for