XMII WebService shows error as - SOAP Service could not be loaded: null

Dear Friends,
I'm doing the xMII <-> XI <-> RFC scenario with the reference of the blog: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8703. [original link is broken] [original link is broken] [original link is broken] I just create an asyncronous scenario. Sender with SOAP adapter and receiver with RFC adapter. After creating the WSDL file from the scenario, I stored it in the xMII server path D:XISendere10099xMII_integration_1_Outbound_MI.wsdl. Then in the WebService action block of xMII BLT, I gave the URL as this file path, user name and password of XI server and click Next. Then I got the error message as SOAP Service could not be loaded: null.
Please give the solution for this issue.
Regards,
Jagan.

Dear Selvam,
Actually I checked those things already. Everything is fine. I executed already HTTP <-> XI <-> xMII scenario and it was working fine. I checked with SendSMS.wsdl file now. That is also working fine. I am attaching the WSDL file, which I am using, for reference. This file is working fine in SOAPSonar and data posted in SAP R/3 table. But it is showing the error in xMII as "SOAP Service could not be loaded: null".
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="xMII_integration_1_Outbound_MI" targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:p1="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><wsdl:types><xsd:schema targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:element name="xMII_integration_1_Outbound_MT" type="xMII_Integration_1_Out_DT" /><xsd:complexType name="xMII_Integration_1_Out_DT"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">750324e0438311ddad100019bb528b1e</xsd:appinfo></xsd:annotation><xsd:sequence><xsd:element name="Vendor" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d01b6611dd8de7001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Name" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d11b6611dd8b8e001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Street" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d21b6611ddcc29001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="City" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d31b6611dd8303001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Dist" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d41b6611ddcd00001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Country" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d51b6611dd9fa5001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element></xsd:sequence></xsd:complexType></xsd:schema></wsdl:types><wsdl:message name="xMII_integration_1_Outbound_MT"><wsdl:part name="xMII_integration_1_Outbound_MT" element="p1:xMII_integration_1_Outbound_MT" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /></wsdl:message><wsdl:portType name="xMII_integration_1_Outbound_MI"><wsdl:operation name="xMII_integration_1_Outbound_MI"><wsdl:input message="p1:xMII_integration_1_Outbound_MT" /></wsdl:operation></wsdl:portType><wsdl:binding name="xMII_integration_1_Outbound_MIBinding" type="p1:xMII_integration_1_Outbound_MI" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:operation name="xMII_integration_1_Outbound_MI"><soap:operation soapAction="http://sap.com/xi/WebService/soap1.1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:input><soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:input></wsdl:operation></wsdl:binding><wsdl:service name="xMII_integration_1_Outbound_MIService"><wsdl:port name="xMII_integration_1_Outbound_MIPort" binding="p1:xMII_integration_1_Outbound_MIBinding" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:address location="http://aprins07:8010/XISOAPAdapter/MessageServlet?channel=:A_Test:xMII_Integration_1_xMII_Sender_CC&version=3.0&Sender.Service=A_Test&Interface=http%3A%2F%2Fwww.xxx.com%2FXIBatch3%2F10099%2FxMII_Integration_1%5ExMII_integration_1_Outbound_MI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:port></wsdl:service></wsdl:definitions>
Regards,
Jagan.

Similar Messages

SOAP service could not be loaded: premature end of file

Hi,
I am trying to call some web services using the Web Service action in the logic editor, but I am always getting some errors. For instance, for an online service (e.g. http://webservices.imacination.com/distance/Distance.jws) I am getting:
"SOAP service could not be loaded: Premature end of file."
I've tried 3 different web services that are available out there, and no result. I've laso tried writing it like this:
http://webservices.imacination.com/distance/Distance.jws/ or
http://webservices.imacination.com/distance/Distance.jws?wsdl
, but the result was the same.
I've also tried a web service that's currently deployed on my machine, using Tomcat. Here, I'm getting some slightly different errors:
http://localhost:8080/epcis-repository-0.2.0/capture/
SOAP service could not be loaded: the element type "HR" must be terminated by the matching end-tag "</hr>"
http://localhost:8080/epcis-repository-0.2.0/capture or
http://localhost:8080/epcis-repository-0.2.0/capture?wsdl
SOAP service could not be loaded: WSDLEXception (at /html): faultCode=INVALID_WSDL: Expected element 'definitions'.
As a note, this web service that I have deployed locally is also available online (http://demo.accada.org/epcis/capture), and if I try out this one, the error is again:
SOAP service could not be loaded: Premature end of file.
As far as I could tell, the /epcis/capture webservice is document/literal, so I don't think this should be a problem. I have read other posts about people having similar problems, but I could not find the answer to my problem...
Can anyone please help?
Thanks in advance!
Angela

Hi,
Thanks a lot, everyone, for your answers! Yes, the firewall and the "rpc/encoded" encoding might explain why the first two web services did not work...
However, it does not explain why the web service installed locally does not work, since it is "document/literal" encoded, as far as I could tell..... And unfortunately, this one is the one that I need to connect to (the others I was only using for testing). Again, this is the error message that I get:
SOAP service could not be loaded: WSDLEXception (at /html): faultCode=INVALID_WSDL: Expected element definitions'.
Parts of the wsdl file are copied bellow, and I can't see anything wrong with it (certainly no <definitions/> missing):
<?xml version="1.0" encoding="UTF-8"?>

<wsdl:definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:epcis="urn:epcglobal:epcis:xsd:1" xmlns:epcisq="urn:epcglobal:epcis-query:xsd:1" xmlns:epcglobal="urn:epcglobal:xsd:1" xmlns:impl="urn:epcglobal:epcis:wsdl:1" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:epcglobal:epcis:wsdl:1">
<wsdl:binding name="EPCISServiceBinding" type="impl:EPCISServicePortType">
    <wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <wsdl:operation name="getQueryNames">
      <wsdlsoap:operation/>
      <wsdl:input>
        <wsdlsoap:body use="literal"/>
      </wsdl:input>
      <wsdl:output>
        <wsdlsoap:body use="literal"/>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
</wsdl:definitions>
As a side note, I now get the same error message if I try to connect from outside the company's firewall to the same web service available on the internet (http://demo.accada.org/epcis/capture?wsdl).
Does anyone have any more ideas?
Thank you once again in advance!
Angela

HT4623 i have updated my i.phone 4 g but after updating when i turned on my phone it was showing the sign to connect to i.tunes and when when i connected i.tunes showed error that the server could not be contacted.... so what i can do now to resolve the

i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????

has your phone been jailbroken?

The class or interface 'mx.remoting.Service' could not be loaded.

Flash 8 was reinstalled on a new machine upgrade. Application
that uses flash remoting is unable to be updated after this new
install error when trying to publish application is :
The class or interface 'mx.remoting.Service' could not be
loaded.
is this because I do not have the "Flash Remoting for Flash 8
ActionScript 2.0" extension installed?
and if so do I have to re purchase this or can it be
reinstalled from the old hard drive of the replaced machine? would
it be a *.mpx file?
The application works but I can't publish any new
modifications without getting this error. and this just started
since my machine was upgraded.. so I hope this is the problem...
thanks in advance....
chuck

The flash remoting components are on adobes website for
download
here

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy

Error 1921 Ipod Service could not be stopped

I am trying to install Itunes 7.6 + Quicktime. On the download status screen it says Status: Stopping Service. The green activity bar stops and after awhile an error message pops up that says - Error 1921. Ipod Service could not be stopped. Verify that you have sufficient privileges to stop system services. It says retry and cancel. Pushing retry only results in the same error. I don't know what this means.

That can happen sometimes if the iTunes installer is having a hard time shutting down either iTunes or QuickTime (or applications using QuickTime) prior to the install. So let's try a "download, restart, then install” strategy.
Leave any iPod unplugged.
Download and save a copy of the iTunes installer to your hard drive. (Do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
Latest iTunes Installer
Shut down running applications and restart the PC.
Do not open any other applications prior to attempting the iTunes install. Switch off antivirus and antispyware applications prior to the install.
Now start the install by doubleclicking the iTunesSetup.exe file.
Does the install go through properly this time?

System error 3 OracleDBConsoleorcl service could not be started.

Hallo!I installed Oracle 10g on my Windows XP while connected to my modem that accesses the internet via DHCP.
I installed the Microsoft Loopback Adapter to force my OEM and isqlplus to use the static IP 10.0.0.1.
When I try to launch my OEM via http://joey-xp:1158/em (hostname joey-xp resolves to 10.0.0.1),I am unable to launch OEM.
From the cmd prompt,I type emctl start dbconsole.
C:\Documents and Settings\JOEY>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://127.0.0.1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
The OracleDBConsoleorcl service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
I don’t understand why the default loopback (127.0.0.1) is being used.
How do I solve this?
Thanks.

Thanks zekeriya but unfortunately using
emca -dbconfig dbcontrol db
does not help.
The system error 3 still appears.
Thanks.

VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

I have been programming/interfacing VBAI2012 and LV2011 for two years already.
There is one very frustrating problem:
- Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
- and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
Is there any log file which I can check?

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

W.I.C.S Nationwide Error Connecting - Specified driver could not be loaded due system error 998

I am currently virtualising W.I.C.S Nationwide with APP V 5.0 SP1 on a Windows 64BIT machine. When I install and launch the application manually I am able to log into the application successfully without issues.
When I sequence the application, I get nothing in the report to suggest any issues. in fact the report has nothing. After sequencing, when testing the application on a client machine (Which is a mirror copy of the sequencing machine), once I put in the log
in credentials and try to connect with the application, I get the below error message:
Error Connecting - 2147467259 :Specified driver could not be loaded due system error 998:Invalid access to memory location. (Oracle in Installclient11_1,C:\ProgramData\App-V\86B33AE4-890E-4E98-AD4F-C4F7A1FCA0DE\4D075A01-3775-4BEA-BEC4-5414B3B0D02E\Root\instantclient_11_1\sqora32.dll).
I was wondering if anyone has had this issue with a similar application that tries to load an ODBC driver and if so how did you resolve it
UObi

When Sequencing did you try to go into ODBC and test the connection? Is that file in that location? If you run a ProcMon, what results does that produce in relation to the sqora32.dll?
Out of interest, have you tried sequencing on a 32-bit machine? I haven't had an issue yet but am wondering if it's a 32-bit driver running on 64-bit and not running correctly for some reason, either way, a ProcMon may give you some clues. Sorry, can't be
much help
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

"Error 1921. Service '***' could not be stopped"

Hello,
After a few crashes from Ni MAX and troubles detecting by GPIB devices, I thought it would be a good idea to do a few updates on my VISA drivers, NI488.2, etc.
But when I run the NI update service on these, I get an error message ressembling the image below. Only thing different is that it complains it cannot stop the NI Lxi discovery service instead of the Ni mDNS Responder service. I then tried to run the Ni repair utility on MAX and a few relevant software modules like VISA and 488.2, only to get the error displayed below.
I tried running the command "net stop niLXIDiscovery" in a cmd prompt with no success. It simply tells me that the service is already stopping...
FYI, I have both LabView 2013 32 and 64 bit installed and both TestStand 2014 32 and 64 bit installed. I only use Ethernet and GPIB to communicate with my instruments.
Thank you!

Hi christianb,
In the list of services that can be accessed from the Contorl Panel, what is the startup type of the NI LXI Discovery Service? If it is automatic, would it be possible to change the type to manual and restart the computer? This would allow us to stop this service after the reboot of the computer and to continue to use the Update Service.
Are you the adminstrator of this machine?
Regards,
Jordan G.
Applications Engineer
National Instruments

Right now i m using ios 5.1.1 and i want to backup up my data to the iphone and my last backup was on ios 4.3.5 but when i restore backup it shows error saying that itunes could not restore the iphone because the backup was corrupt or the device is not...

How to backup an ios 4.3.5 backup on new ios 5.1.1

Make sure that you deleted and reinstalled iTunes exactly the way described in this support document http://support.apple.com/kb/HT1923

ERROR [IM003] Specified driver could not be loaded due to system error 1114

I'm seeing this error when I try to run an ASP.NET project within visual studio 2008. I've just upgraded to Windows 7. This all worked, of course, under XP.
I'm using Oracle 10g. I can connect to the databases using SQLDEVELOPER. All of my ODBC Datasources test fine.
The rest of the error is (Oracle in OraClient10g_home2, C:\oracle\product\10.2.0\client_2\BIN\SQORA32.DLL).
The file is there. I opened up the permissions on the Oracle directory, so I don't think it's permissions related. I've seen a few similar errors in the forums, but no valid solutions. What's going on here?

Is the 10g database on the local Windows 7 server ? If so, 10g is not supported/certified on Win 7, so things may or may not work.
HTH
Srini

I am not able to activate my iPhone 3GS after upgrading it to IOS 5.1.1 since it shows the error message "your iPhone could not be activated because the activation server is temporarily unavailable. I am asked to retry after some time. How can I avoid thi

i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

?Error message when opening PE11. (online services could not be initialized. Please reinstall)

When opening PE 11, error message : online services could not be initialized. Please reinstall appears. Reinstalls does not fix problem. What do I do next?

You should be able to launch without ols. Can you try directly from the application in the following location:
C:\Program Files(x86)\Adobe\Photoshop Elements 11
Double click on:
PhotoshopElementsEditor.exe
Let us know if that works.
If not, try downloading the missing file from the following link (it says PSE10 but should work) and unzip the folder to extract the file and drag it into the assets folder.
http://helpx.adobe.com/photoshop-elements/kb/welcome-screen-keeps-running-auto.html
If that doesn’t work I would suggest uninstalling via the control panel and installing from a fresh download. You can download the free trial from this link and then validate with your serial number.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997

The CSadmin service could not be started.

I am Upgrading from 3.3 to 4.2...
When I upgrade from 3.3.4 to 4.1, 4.1 is not working.
No error during the install, but when I try to start csadmin (net start csadmin) I have this error
"The CSadmin service could not be started. error 3523"
I tried exactelly the same upgrade on other machines with the same config and it's working well.
I have tried to clean the registory manually and using the clean tool on the CD, it doesn't help.
The fresh install of 4.2 is not working better, same error.
Any idea about what it could be ?
I am wokring on ACS for windows with Windows Server 2003 SP2.
Thanks For your help.

Have you tried restarting the service from services.msc. Also, try rebooting the server. If that doesn't help, then you need to uninstall theCS software and reinstall it.
If you have already tried clean utility to uninstall the ACS and issue still persist. Please disable all the ACS services via services.msc and then try to uninstall it.
Please let me know if you have any query or concern.
Regads,
JK
Do rate helpful posts-

XMII WebService shows error as - SOAP Service could not be loaded: null

Similar Messages

Maybe you are looking for