Xml data missing

excuse me i get a task to make a template for standard report i getting the xml file from the system and uploaded to bi publisher there are fields displayed correctly and others not shown however there are found in the xml
file i cheeked it
is there any solution for these problem

Hello,
Sorry, I cannot get your requirment and report design structure currently. Can you post the following information to us ? It is benefite us for further analysis.
1. The fields in your dataset. You can post the dataset with sample data if it is convenient.
2. The Report design structure: Table or Matrix and Group inforamation
3. It seems that you want to filter the report data based on a expression, please post more details about the filter logic and expected result.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

Single row of XML data missing

OK, much strangeness here.
I have an mx:DataGrid taking its data from an array
collection thusly:
logSheetData = logs.lastResult.logsheet.data as
ArrayCollection;
The XML is being generated perfectly by a php page.
If the xml consists of 2 or more nodes (i.e. the mysql_query
returned 2 or more rows of data from the database) then the grid
populates properly and everyone is happy. However, if the query
returns only a single row of data, the grid is blank.
I've checked the php and the contents of the database - if
there's only a single row of data to come back, one row's worth of
XML is returned.
This has been driving me mad all morning! Help!
-Update-
I have patched the problem by adding in an empty node to the
xml structure if only 1 row of data is returned - this seems to
fool the grid and causes it to display properly. Buy why!

Corvette Captain wrote:
In an interactive report, is it possible to display the data from one database row over two or more displayed rows on a page?Yes. Create the required structure using the Detail View properties.
Users can switch between views using the view controls. You can display the report in Detail View by default via a Dynamic Action: +{thread:id=2187972}+

Using a SQL data source and XML data source in the same template

I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
Rhonda

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

How to read XML data stored in CLOB in Concurrent prog Output

Hi All,
I'm trying to Generate the XML Data as concurrent Program output. I have a PL/SQL package which generated the XML data by using SQL/XML functions. I'm storing the generated XML data in a CLOB variable. But when i try to read the data using fnd_file.put_line(fnd_file.OUTPUT,XML_Data) it doesn't display data more than 32767 bytes.
Please help me out to understand what could be done to read the data in chunks. I have tried many logic's to print chunks of data but the output tags are either chopped off and errors out saying Tag not found.
My logic is as below:
v_handler:= DBMS_XMLGEN.newContext(v_xml_query);
--Sets NULL handling options
DBMS_XMLGen.SetNullHandling(v_handler, dbms_xmlgen.EMPTY_TAG ) ;
--Set special character handling
DBMS_XMLGEN.setConvertSpecialChars(v_handler, TRUE);
-- Specified whether to use an XML attribute to indicate NULLness of particular entity in the XML document
DBMS_XMLGen.useNullAttributeIndicator(v_handler,TRUE);
-- set Checking invalid chars
DBMS_XMLGEN.setCheckInvalidChars(v_handler, TRUE);
-- get the xml data as required
v_xml_data:= DBMS_XMLGEN.getXMLtype(v_handler);
SELECT XMLROOT(v_xml_data.extract('/*'),VERSION '1.0').getClobVal() into v_new_xml_Data from dual;
-- get the length of the xml generated
v_clob_len := dbms_lob.getlength(v_new_xml_Data);
FND_FILE.PUT_LINE(FND_FILE.LOG,'The Clob length is :'|| v_clob_len);
-- logic to process string more than 32767 Processing by each character
v_offset :=1;
while (v_offset <= v_clob_len)
LOOP
v_char := dbms_lob.substr(v_new_xml_Data, 1, v_offset);
IF (v_char = CHR(10))
then
fnd_file.new_line(fnd_file.output, 1);
else
fnd_file.put(fnd_file.output, v_char);
end if;
v_offset := v_offset + 1;
END LOOP;
FND_FILE.PUT_LINE(FND_FILE.LOG,'The offset is :'|| v_offset);
FND_FILE.NEW_LINE(FND_FILE.OUTPUT, 1);
THe above logic is for character by character which is a performance burden? Please let me know if there is any other work around for this

Hi,
Thanks for Replying. I have refered http://blog.oraclecontractors.com/?p=69 and then i added that piece of code. Basically, i'm trying to generate a report using XML publisher. To generate the XML data i'm writing a pl/sql package with SQl/XML functions. DBMS_XMLGEN would help me convert the XML Data as is. When the concurrent program runs this XML data will merge with RTF layout and generate required report. I'm able to generate the Report for data less then 32767 bytes. More than the limit i need to pass chunks of XML data to read as output. That's the reason i'm using fnd_file.output. But it reads only 32767 size at a time.
WHen i use the given logic, it works perfectly fine, but it loops for each character, for example if you have 30,000 characters it loops the same, which is peformance burden.
So i tried to write the logic of chunks but still i get the error that XML tag is not found or missing. I'm hoping this is very common issue, but after all my trails, i didn't find the right solution.
the other logic i tried was :
v_new_xml_data varchar2(32767)
v_iterations := CEIL(v_clob_len/v_chunk_length); -- v_chunk_length is 32767 and v_clob_length is length of the XML data stored inthe clob variable
For i in 0..v_iterations
LOOP
FND_FILE.put_line (fnd_file.log,'the loops v_pos :'||i||' and v_clob_length :'||v_clob_len);
v_new_xml_data := DBMS_LOB.SUBSTR ( V_XML_DATA,v_chunk_length,(i*v_chunk_length)+1);
FND_FILE.PUT_LINE (FND_FILE.OUTPUT,v_new_xml_data); -- read the output for every 32767 chunks
FND_FILE.PUT_LINE(FND_FILE.LOG, 'Chunk length is :'||((i*v_chunk_length)+1));
END LOOP;
FND_FILE.put_line (fnd_file.log,'out of loop');
FND_FILE.put_line (fnd_file.log,'length of new xml is '||v_clob_len);
Please, let me know if you need Further clarifications on the same.

XML data inserting into Master, not Page

First, I fully admit that I jumped into the deep end of the pool. This is my first InDesign project and I'm trying to set up a 2-page spread master to support loading my content from XML.
Thanks to the great online help, these forums/community resources, and my growing bookshelf, I've successfully (or so it seems) created my Master layout, with frames appropriately tagged for my XML (as confirmed by the Structure). Since I'm very novice at InDesign, my testing isn't always unambiguous, but I HAVE successfully loaded my external XML (including graphics and anchored text, plus the story) into my document.
The problem is that the data seems to be flowing into the Master, and not the Page. So if I create all the pages I need ahead of time (right now just 2 spreads for my test), both pages are populated with the first record.
If I only create the first spread, then the data flows and I get the magic "+" for overflow, but I can't click on it in the Page. If I change to the Master I can click on it, which seems the major clue as to why this isn't working. I just have no idea how to fix it.
From everything I've read it seems that I should be able to tag my frames in the Master (which I want to reuse for other documents) and have the data flow into the Pages.
Am I missing something obvious?
Or is what I'm trying to do just not possible? (if so, does that mean I have to keep re-tagging the frames every time I make a new Document? ugh)
I've spent hours trying to resolve this, and would really appreciate a pointer to get me moving again.
Thanks!
julie

Hm, that seems contradictory to everything I've read and the examples I've seen (although I may have misunderstood the examples - none are quite as complicated as my layout). My text frame has several anchors for XML data that doesn't just flow with the story. How do I set up the tagged anchor frames I need if the story text frame is in the Master but not tagged?
I thought that the story text frame and the anchor frames (some graphics and some text) all needed to be in the same context. If I put them in the Master I get the XML flowing into the Master. If I put them into the Page then the new pages created don't have the proper frames. If I just put the story text frame in the Master, how do I associate it with the anchor frames (I only know how to do this by using the Story editor on the tagged frame as described in A Designer's Guide To Adobe InDesign and XML)?
I'll go back and work through the samples again, but I definitely don't understand how it all fits together.
Thanks!
j

How to loop through XML data in a table of XMLType?

Hi,
I am failry new to xml document processing in Oracle using PL/SQL.
My DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
I have successfully loaded an xml document into a table using the following two statements:
1) CREATE TABLE mytable2 OF XMLType;
2) INSERT INTO mytable2 VALUES (XMLType(bfilename('IMAGE_FILE_LOC', 'IFTDISB20100330172157C002.xml'), nls_charset_id('AL32UTF8')));
Now I need to traverse through the various nodes within the xml document and extract values of elements of each node. The question I have is:
How do I loop through a node? A VALID record is enclosed within the <checkItem> </checkItem> tags.
Here is a snippet of the data in that xml document:
++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8"?>
<bdiData>
<documentControlInfo>
<documentInfo>
<docDescription>Check images and data for Test Company, account number 1234567890</docDescription>
<docID>
<ID>20100330172157</ID>
</docID>
<docModifier>Test Company</docModifier>
<docCreateDate>2010-03-30</docCreateDate>
<docCreateTime>17:21:57-0700</docCreateTime>
<standardVersion>1.0</standardVersion>
<testIndicator>0</testIndicator>
<resendIndicator>0</resendIndicator>
</documentInfo>
<sourceInfo>
<sourceName>The Bank IFT</sourceName>
<sourceID>
<idOther>TheBankIFT</idOther>
</sourceID>
</sourceInfo>
<destinationInfo>
<destinationName>Test Company</destinationName>
<destinationID>
<idOther>FEI3592</idOther>
</destinationID>
</destinationInfo>
</documentControlInfo>
<checkItemCollection>
<collectionInfo>
<description>Items</description>
<ID>1269994919135</ID>
<Classification>
<classification>Items</classification>
</Classification>
</collectionInfo>
<checkItemBatch>
<checkItemBatchInfo>
<description>Paid Checks</description>
<ID>1269994919135</ID>
<Classification>
<classification>Paid Checks</classification>
</Classification>
</checkItemBatchInfo>
<checkItem>
<checkItemType>check</checkItemType>
<checkAmount>86468</checkAmount>
<postingInfo>
<date>2010-03-29</date>
<RT>10700543</RT>
<accountNumber>1234567890</accountNumber>
<seqNum>009906631032</seqNum>
<trancode>001051</trancode>
<amount>86468</amount>
<serialNumber>300040647</serialNumber>
</postingInfo>
<totalImageViewsDelivered>2</totalImageViewsDelivered>
<imageView>
<imageIndicator>Actual Item Image Present</imageIndicator>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Front</ViewSide>
<imageViewLocator>
<imageRefKey>201003260000738400851844567205_Front.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Rear</ViewSide>
<imageViewLocator>
<imageRefKey>201003260000738400851844567205_Rear.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
</imageView>
</checkItem>
<checkItem>
<checkItemType>check</checkItemType>
<checkAmount>045</checkAmount>
<postingInfo>
<date>2010-03-29</date>
<RT>10700543</RT>
<accountNumber>1234567890</accountNumber>
<seqNum>008518967429</seqNum>
<trancode>001051</trancode>
<amount>045</amount>
<serialNumber>200244935</serialNumber>
</postingInfo>
<totalImageViewsDelivered>2</totalImageViewsDelivered>
<imageView>
<imageIndicator>Actual Item Image Present</imageIndicator>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Front</ViewSide>
<imageViewLocator>
<imageRefKey>201003290000713900851896742901_Front.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Rear</ViewSide>
<imageViewLocator>
<imageRefKey>201003290000713900851896742901_Rear.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
</imageView>
</checkItem>
<checkItemBatchSummary>
<totalItemCount>1028</totalItemCount>
<totalBatchAmount>61370501</totalBatchAmount>
<totalBatchImageViewsDelivered>2056</totalBatchImageViewsDelivered>
</checkItemBatchSummary>
</checkItemBatch>
<collectionSummary>
<totalBatchCount>1</totalBatchCount>
<totalItemCount>1028</totalItemCount>
<totalCollectionAmount>61370501</totalCollectionAmount>
<totalCollectionImageViewsDelivered>2056</totalCollectionImageViewsDelivered>
</collectionSummary>
</checkItemCollection>
<documentSummaryInfo>
<totalCollectionCount>1</totalCollectionCount>
<totalBatchCount>1</totalBatchCount>
<totalItemCount>1028</totalItemCount>
<totalDocumentAmount>61370501</totalDocumentAmount>
<totalDocumentImageViewsDelivered>2056</totalDocumentImageViewsDelivered>
</documentSummaryInfo>
</bdiData>
++++++++++++++++++++++++++++++++++++++++++++++++
Any ideas and or suggestions will be greatly appreciated.
Cheers!
Edited by: user12021655 on Aug 3, 2010 1:25 PM

I really need to update my blog to get the example you are looking for posted. I did a quick search on the forums for XMLTable and found a good example at {message:id=4325701}. You will want to use OBJECT_VALUE in the PASSING clause where you need to reference the column in your table.
Note: See the FAQ in the upper right for how to use the tag to wrap objects to retain formatting. Also your XML is missing closing nodes.

PDF form with XML data connection comes up blank at run time

Hello All,
I am a newbie to ADOBE Livecycle 9, but am very proficient in C#. I would like to request for your guidance on the following issue.
We have a desktop application in C#, WPF, Sqlserver. The requirement is to launch a Livecycle form from the application for the user to read/edit/save data
I have done this much so far -
Downloaded trial version of Livecycle 9
Developed a interactive PDf form
Created an XML based data connection. Generated fields on the form using the fields from this connection.
Set the .XML file as preview source for the form
the controls on the form are boumd to the xml data source
In design mode, the form works fine, it displays my data correctly
I have created a WPF form with a button. On click of this button, I call the Process.Start(pdf-file-path). My pdf is launched properly
I have added a combo box to my WPF form. I select a parameter from this, then call a stored procedure which returns me a datatable depending on parameter passed
Using the returned datatable, I have used the datatable.writexml and datatable.writexmlschema to create my XML and XSD files. as mentioned above, this xsd is used to create the data connection for the PDF and the XML for the preview source
This is what I want to do -
Launch the PDF from my WPF form, pre-populated with the newly created XML data from my WPF form.
So basically, as the user changes the selection criteria from the combo box, the XML file data will change and the PDF file will be launched each time with new data.
The XSD format will always be constant
Problem -
My XML and XSD get created properly, my PDF launches, but it is empty
If I change my selection criteria and run the WPF application, and then open the PDF in design mode, it asks me whether it should refresh the XML source. This means that the PDF form is connecting correctly to the XML source
So why then, does the form come up empty at run time?
What link am I missing?
I have found some sites that help using Web applications, but nothing for desktop applications. It would be fantastic if you could point me to some help for developing Livecycle forms with C# / SQLServer
Your help in this case will be highly appreciated.
Thanks and Regards

Oops, something happended with the above post. I will try again... I have tried your suggestion but I still get the same garbled XML (with data repeated and some values "cut in half". Here is what I get after decode-service and extract-to-XML-service. This is just the first barcode, the others are similar, sorry for the poor formatting, but I get a CDATA tage infront of the "istensen" value. CDATA:istensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie >Superroad 99, 1330 Supertown</fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 >/sub_Adresse ><sub_Person ><fld_ForMellemEfterNavn>Kim Christensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie > Superroad 99, 1330 Supertown </fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 Obviously this is not a legal xml-string, so I can do nothing about it. I have tried using a custom .NET component (ClearImage) for reading the same form (with the barcode) I get the correct data out from the barcodes. So I guess something is wrong with the decode-service in Barcoded Forms ES when I use compressed XML. But I can conclude since the ClearImage component can read the barcodes that they are compressed correctly. Can you help me with getting further with this problem? Sincerely Kim

HTTP XML Data Source authentication error

Morning All,
I have just started playing around with using XML as a data source for my CR4Ev2.0.1 reports.
I have managed to create the local inline reports and change their data source loacation with no current
issues.
I am now trying to create the HTTPXML reports using code from Ted's BLOG.
I manage to create a new report, and can open it in design, I can see the data source structure but as
soon as I try browse the data or preview my report I get the following error
Cannot Open file
Server returned HTTP response code: 407 for URL:
http://myserver/httpxml.xml
I had a quick look up the 407 error and it seems to be a Proxy authentication error, we do have a proxy
server setup which requires a username and password.
Before I go through what I have tried I want to confess that for this httpxml.xml file all I did was take my
inline.xml file and rename it and make it avaliable via a URL. So this might be the whole problem but I
am sure this is ok.
So I have tried turning off the proxy server as this URL is local so I dont need to go through the proxy.
If I go to the URL in my browser it works fine and I do not need to enter any proxy details.
Thats the problem with my HTTP XML attempt.
If I use the code as is, from Ted's BLOG, for
Crystal Reports off of HTTP XML data URL
and try use the following 2 URLs
propertyBag.put(
"Http(s) XML URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/orders.xml");
propertyBag.put(
"Http(s) Schema URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/orders.xsd");
propertyBag.put(
"Http(s) XML URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml");
propertyBag.put(
"Http(s) Schema URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xsd");
But I get the following errors
Exception in thread "main" com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon
Error: {0}---- Error code:-2147217393 Error code name:dbLogonFailed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.byte(Unknown
Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.addTable(Unknown
Source)
     at com.businessobjects.samples.CreateHttpXML.main(CreateHttpXML.java:90)
Caused by: com.crystaldecisions.reports.common.LogonFailureException: Logon Error:{0}
     at com.crystaldecisions.reports.queryengine.Connection.br(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.bs(Unknown Source)
Any ideas as to what my issues are or what I am missing.
Thanks in advance.
Darren
Edited by: Darren Jackson on Apr 28, 2009 2:12 PM
Is there any documentation as to what entries I can use in the property bag.
Like is there a ("ProxySet", false) or something along those lines?
Edited by: Darren Jackson on Apr 28, 2009 5:28 PM
I have made a little more head way.
I saved the Orders.xml and Orders.xsd files onto my webserver and editied the code to only worry about
the Orders and ignore the Customer files.
I now create my reports, open them in Eclipse to design them, but when I try preview the data it is now
asking me for a username and password. I have tried all combinations that I can think of for our systems
but none work.
Grrrrrrrrrrrrrrr

I have subsequently determined that my main problem was my "cached" proxy settings within Eclipse.
Even though I removed the proxy settings in Eclipse, it still required me to restart Eclipse after which it
all started working ok.
That was my main problem, but I am still interested in the Property Bag options that I mentioned before.
If proxy settings are needed, how would one go about setting these details?
Thanks
Darren

JRC XML Data source

I'm trying to see a report based on an XML data source with JRC
I'm using crystal reports XIR2 with websphere 5.1.1;
with a simple report i'm able to see it, then i tried to add a parameter (discrete/not multiple) in the report but if i don't pass it in my jsp page i have the error "some parameters are missing" and it don't prompt me for parameter value (i've set CrystalReportViewer.setEnableParameterPrompt(true)) and if i pass the parameter in the way of other reports (with ParameterFields etc... or with ParameterController) ii have the java.lang.NullPointerExcepion at the processHTTPRequest
please help, i'm stucked!!!

I'm trying to see a report based on an XML data source with JRC
I'm using crystal reports XIR2 with websphere 5.1.1;
with a simple report i'm able to see it, then i tried to add a parameter (discrete/not multiple) in the report but if i don't pass it in my jsp page i have the error "some parameters are missing" and it don't prompt me for parameter value (i've set CrystalReportViewer.setEnableParameterPrompt(true)) and if i pass the parameter in the way of other reports (with ParameterFields etc... or with ParameterController) ii have the java.lang.NullPointerExcepion at the processHTTPRequest
please help, i'm stucked!!!

XML Data Source - RSA7 Queue

I have a datsource created for an XML incoming data into BW . I have followed all the steps mentioned in the SAP documentation . I am getting the queue displayed in the RSA7 ,but when XI is sending XML data to BW , it is coming and displaying in the queue as one . but the data in the file is coming blank for all the fields defined in the Datasource.
Let me know any clue what am i missing in the entire setup.

Hi,
Go thorugh the below the links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f7f8f95-0501-0010-f5ba-f19167ef74c4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to send xml data to bw
Thanks
DST

XML Data Source Issue

Post Author: MrJames
CA Forum: Semantic Layer and Data Connectivity
I'm sure the issue is my lack of understanding on how this should work. I've created a report using an XML data source. The fields on my report come from the XML file schema, and all fields having to do with quantities selected from the schema show as numeric fields in the report designer. However, when I try to use the SUM function on these fields I only get a count, and not a sum.
When I view the XML file using XML Notepad 2007, the viewer shows these fields as text fields. So as near as I can tell, I'm reading text data into a field defined as numeric.
I can directly connect to the table in SQL Server 2005 and the sum functions work fine, however, the sum function will not sum when using the XML table.
Apparently I'm missing something here??

Hi,
Which product are you using and in which version?
Didier

Error: IDoc XML data record

Hi all,
 We have file->XI->idoc scenario and the problem we are facing is like, when the idoc structure is prepared using XSLT mapping, when the idoc is ready to get in thru the idoc adapter we are getting the following error.
Error: IDoc XML data record: In segment
Z1UKGAS_HEADR attribute occurred instead of SEGMENT 
Anyone faced the same issue....if so pls do throw some light into this issue....
We r in XI 3.0 SP13...
Thanks & regards,
Jayakrishnan

Hi,
In an IDOC structure segment attribute is requried. From the error you posted, it looks like seqment attribute is missing.
<Z>
 <IDOC BEGIN="">
 <ED SEGMENT="">
 </ED>
 </IDOC>
</Z>
Naveen

Submit Button to submit xml data of form to a server folder

I have Livecycle ES2 vs 9 on Windows 7.
I have created a form that our users will fill out in adobe reader. I would like them to be able to hit the submit button and it send the xml data to a specified folder on our server.
I created a submit button from from the generic "button", chose to use as a "submit" control type, then entered the servers url as http://<my server name>:<Open Port>/<Folder name on the server>/
I chose to submit as XML data
When I test the button, a box willl pop up saying "Preparing for submit..." then immediatley changes to "Receiving Data".
The problem is that the box freezes on "receiving Data" but I do not need to receive data, I just need to dump the xml data to the folder on my server.
I have used a variety of urls with and without the port#, or without the http: but with backslashes but get the error "An error occurred during the submit process. There was a problem connecting to the server." I feel the latest URL with the port# is at least closer by trying to communicate with the server.
Not sure what I am missing but I have seen in other forums where some have used PHP code or a servlet but I have no experience with either and the forums did not cover the scripting and where it needs to be placed.
Can someone help me?
Thanks

As far as I know you canit simply write a file to the server using HTTP protocol. If your server was set up as an FTP server you coudl use the FTP protocol (but Acrobat does not support that). You can post the file to a server program (as you mentioned a servlet or JSP or whatever your server supports) and it can in turn write it to your server location.
Hope that helps
Paul

Fill in form using XML data source usable in Reader

I have a simple example of a scenario we need to solve. Different branches will fill out a form (designed in LiveCycle 8) and by entering their branch number static information will be filled in. I want to store the static infomation for all branches in an XML sheet that will be stored on a shared folder on the intranet.
The problem I have is getting the script to run in Reader. In preview in the Designer and using the import data function of Acrobat Pro it works fine. I think I am missing the script to import the data to work in Reader. I have not been able to find anything in the documentation to point me in the right direction. I have also had a case open with Adobe support for 2 months.
Any help would be appreciated.
Kris
Below is the script in the exit event of the Text field BranchNumber:
----- BranchInfo.#subform[0].BranchNumber::exit: - (FormCalc, client) ------------------------------
xfa.host.resetData("xfa.form.BranchInfo.#subform[0].Party_Code")
Party_Code.clearItems()
var BList = ref(record.Branches)
for j=0 upto (BList.nodes.length -1) do
xfa.resolveNode("BranchInfo.#subform[0].Ph") = BList.nodes.item(2).name
if (BList.nodes.item(j).BranchCode.value == $) then
xfa.resolveNode("BranchInfo.#subform[0].Full_Company_Address") = BList.nodes.item(j).Full_Address.value
var List = ref(BList.nodes.item(j).SPCS)
if (List.nodes.length == 1) then
xfa.resolveNode("BranchInfo.#subform[0].Party_Code") = BList.nodes.item(j).SPCS.SPC.value
elseif (List.nodes.length > 1) then
for i=0 upto List.nodes.length -1 do
BranchInfo.#subform[0].Party_Code.addItem(List.nodes.item(i).value,"")
endfor
endif
xfa.resolveNode("BranchInfo.#subform[0].Ph") = BList.nodes.item(j).PH.value
xfa.resolveNode("BranchInfo.#subform[0].Fax") = BList.nodes.item(j).FAX.value
xfa.resolveNode("BranchInfo.#subform[0].Member") = BList.nodes.item(j).Member.value
break
endif
endfor
Below is the xml data file for this test:
<BranchInfo>
<Branches>
<Branch>
<BranchCode>123456</BranchCode>
<Full_Address>123 First RD #02 BOX 2222, DARTMOUTH, NS, B7W 1X9</Full_Address>
<PH>9025551234</PH>
<FAX>9025556789</FAX>
<Member>991AP991P</Member>
<SPCS>
<SPC>NS-6379</SPC>
</SPCS>
</Branch>
<Branch>
<BranchCode>123882</BranchCode>
<Full_Address>BOX 55 Second ROAD PLAZA, ST JOHN'S, NL, A9N 1X1</Full_Address>
<PH>7095552345</PH>
<FAX>7095557890</FAX>
<Member>991AP222P</Member>
<SPCS>
<SPC>NL-706</SPC>
</SPCS>
</Branch>
<Branch>
<BranchCode>123333</BranchCode>
<Full_Address>333A Third ST, ST STEPHEN, NB, E9A 2Z3</Full_Address>
<PH>5065553333</PH>
<FAX>5065559999</FAX>
<Member>991AP333P</Member>
<SPCS>
<SPC>NB-10269</SPC>
</SPCS>
</Branch>
</Branches>
</BranchInfo>

Hi Jeroen,
to have a user fill in, you first need to create a Web Dynpro application providing the offline form, e.g. through a download - tutorial at http://sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2dd3dbcd-0401-0010-55b8-b10808ff688e - or an e-mail - tutorial at http://sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/b040e6cd-0401-0010-268d-f67cf4904358
On the return trip, the user-entered data is stored in the SAP backend via the Web Dynpro context. (You do not store the raw XML, the data is back-converted by ADS to Java.)
In the fourth step, you will have to provide a Web Dynpro
application with an online form, which can be part of the same project, but basically generates the form again for completion.
If you want to use the same form that was submitted, you have to have your app store the submitted PDF (do not submit only the XML) in the backend (through the WD context), and then call that one up in the online scenario.
Cheers,
Markus

XML Data Mapping Disappear when Reopening xlf - Xcelsius

Hi,,,
I have created one xcelsius with XML Data maps which works fine. But when I re-open this XLF, the XML data mapping disappear from XML source screen of Excel. It's so much enoying, so every time when i re-open the xlf. I have to map xml data again and then do some formating. after that it works fine.
I guess i have missed some setting. Does anyone has faced such a weired problem with xcelsius.
your quick help in this will be really appreciated.
Regards,
Ashish

Hi,
Its a Fixed Issue ,It has been solved
For Futher Details
http://alteksolutions.com/wp/index.php/2010/10/xcelsius-2008-sp-3-fix-pack-3-now-available/
XML Data Maps Disappear when Reopening xlf
Regards
Naveen

Xml data missing

Similar Messages

Maybe you are looking for