XML Data Source using SSRS intgrated in ShaPoint

I am trying to use an XML soap data source in my report and use the report in my SharePoint site but I get the following error: (SharePoint integration is configured as trusted site) we changed it to windows authentication but get errors on all reports.
(error below when using windows security)
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
impersonate user for data source 'dsSkillsMatrix'.
(rsErrorImpersonatingUser)
This
data source is configured to use Windows integrated security. Windows integrated
security is either disabled for this report server or your report server is
using Trusted Account mode. (rsWindowsIntegratedSecurityDisabled
(error below when using no credentials) I also have unattended execution account set as well but it still asks me for credentials when running the report.
An
error has occurred during report processing. (rsProcessingAborted)
The
data extension supports Windows Integrated Security and No Credentials
(anonymous request) only. (rsXmlDataProviderError
im not sure why it tells me this im using the No credendtials option here.
I read this but I did everything they said and I still have the errors above
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/acc247b4-3257-47da-9531-fdad5bebcbd4/web-service-as-dadatource-with-basic-authentication?forum=sqlreportingservices

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

Similar Messages

OLAP cubes from heterogeneous data sources using XML DB

hi.
Q:1
How we can create an OLAP cube (XML cubes) from XML data sources if using XML DB.
Q:2
How we can create an OLAP cubes from warehouses and flat files and covert these cubes into XML cubes.
Q:3
Is there any other tool (Except Analytical workspace manager AWM) which supports the construction of OLAP cubes in XML format from heterogeneous data sources?
Edited by: user11236392 on Aug 21, 2009 3:50 AM

Hi Stuart!
Your undersatnding is partially correct. i am working for providing an architecture for XOLAP, XML is one of my data source.
The idea is to generate uniform cubes from heterogeneous sources that can be integrated into a global cube. instead of building Oracle OLAP cubes from all the sources (this work is already done) i want to generate an XCube from XML data sources using XQuery.
On the other hand if we have generated the Oracle OLAP cube from other sources like warehouses or flat files. i have to convert these Oracle OLAP cube into XML cube for uniformity. in an research paper i find that there is an operator Xcube embedded in XQuery which converts the multidimensional data (cube) into XML cube. im looking for the implementation of this operator in Query that how this operator works.
hope u understand my architecture. but if u still have some confusion, kindly give me ur mail id. i will mail the diagram of my architecture.
thanks.
saqib

BI Admin Tool and XSLT transformation for XML data source - How it works ?

Hello,
There is a possibility to import data from XML data source using BI Admin Tool.
In the import window we can point XSLT file. What is the purpose of that XSLT field?
Why I am asking ?
I thought it is smth like XSLT processor, but simply it doesnt work.
What I did:
- I pointed XML data source file
- I pointed XSLT transformation file
- Click OK, and still get the message that the XML file structure is not supported
After that I transformed that XML file with some desktop XSLT processor using the same XSLT file, and I tried to connect that file directly using BI Admin tool.Then it works. So it means that the transformation is ok.
So basically one question comes to my mind in that situation:
What is the purpose of XSLT field in BI Admin Tool when it comes to XML data source ?
(it doesnt look like XSLT processor)
Greetings
/Michal

Hi Mariano
Why you need to use XSLT for transforming XML file into ABAP table
Code is a part of some ABAP report. Looks like it is reading a file from file system and updating table after transformation
If you have requirement like you need to read XML file and then insert the data into a SAP table
You can use
File to RFC
File to Proxy scenario using SAP PI.
Please provide more inputs on requirement to help
Thanks
Gaurav

XML Data Source: does not seem to validate against XSD

I setup XML data source using the example "b-c.xml" and "b-c.xsd"; I changed the
root element of "b-c.xml" from "<db>" to "<Customers>"; but Liquid Data does not
seem to care or validate the instance document against the XSD.
Is this a known bug? It's something very basic and obvious!

LD does indeed catch and report the mis-match at run-time as shown in the exception
below.
It does not valid the XML file against the schema at configuration time, only
at run-time. Hence Step 8 here - http://edocs/liquiddata/docs81/admin/xml.html#1035818
But beware - in some (most) cases LD does not do validation against the schema
for performance reasons. If the schema does not match you will simply get empty
results.
- Mike
java.rmi.RemoteException: Query Execution Error (Run Time) 1-2-3-24: Cannot process
XML file source XM-BB-C. (com.enosysmarkets.xqdm.translators.XqdmTranslatorException:
Invalid root element name: 'CUSTOMERS'. Expected: 'db')
"David Song" <[email protected]> wrote:
>
I setup XML data source using the example "b-c.xml" and "b-c.xsd"; I
changed the
root element of "b-c.xml" from "<db>" to "<Customers>"; but Liquid Data
does not
seem to care or validate the instance document against the XSD.
Is this a known bug? It's something very basic and obvious!

Xml data source limit

Hi
I've been having trouble finding information on this, but is there a limitation on the file size of the xml data produced by an apex report query?
If I download the xml data in the application builder, I'm finding once the expected xml data size goes over 32k, all I get is a file containing the xml tags but with no data.
32k seems pretty small. I was reaching this limit because I was using APEX_WEB_SERVICE.BLOB2CLOBBASE64 to send an image to my report. I would have thought even just a decent number of rows would reach this size also.
Am I missing something?
Apex 4.0.1.00.03
Scott

LD does indeed catch and report the mis-match at run-time as shown in the exception
below.
It does not valid the XML file against the schema at configuration time, only
at run-time. Hence Step 8 here - http://edocs/liquiddata/docs81/admin/xml.html#1035818
But beware - in some (most) cases LD does not do validation against the schema
for performance reasons. If the schema does not match you will simply get empty
results.
- Mike
java.rmi.RemoteException: Query Execution Error (Run Time) 1-2-3-24: Cannot process
XML file source XM-BB-C. (com.enosysmarkets.xqdm.translators.XqdmTranslatorException:
Invalid root element name: 'CUSTOMERS'. Expected: 'db')
"David Song" <[email protected]> wrote:
>
I setup XML data source using the example "b-c.xml" and "b-c.xsd"; I
changed the
root element of "b-c.xml" from "<db>" to "<Customers>"; but Liquid Data
does not
seem to care or validate the instance document against the XSD.
Is this a known bug? It's something very basic and obvious!

Can we use REST web service as Data source in SSRS? !!!!NOT SOAP!!!!

Hello,
We have requirement to use the REST web service as the Data source of SSRS. Tried with XML as Data Source, but unfortunately I could not succeed because the query expects SOAPAction which is not available in REST Service.
Do we have any option to use REST Service, if so please provide some basic example, so that I can try out some options.
If not, do we have any alternate solutions to handle these situations?
Thanks!
Vinay

Hi Vinay.
After looking on it for some time, I am afraid currently there is no document to talk on how to use the REST web service as a data source.
You can use the link
http://technet.microsoft.com/en-US/library/aa964129(v=SQL.90).aspx for a renference.
From a support perspective currently this is really beyond what we can do here in the forums. If you cannot determine your answer here or on your own, consider opening a
support case with us. Visit this link to see the various support options that are available to better meet your needs: http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks,

Using a SQL data source and XML data source in the same template

I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
Rhonda

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
    <CUSTOMER_ORDER_CONF_REP>
        <ORDER_NO>D555809</ORDER_NO>
        <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
        <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
        <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
        <CUST_NAME>Mr.Johan Matts</CUST_NAME>
        <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
        <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
        <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
        <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
        <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
        <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
        <BILL_ADDR_3>Watthala</BILL_ADDR_3>
        <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
        <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
        <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
        <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
        <ORDER_LINES>
            <ORDER_LINE>
                <LINE_NO>1</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1200</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID xsi:nil="1"/>
                        <CHARACTERISTIC_VALUE xsi:nil="1"/>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>2</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1500</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>3</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>3</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1000</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>4</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1350</PRICE_TOTAL>
                <DISCOUNT>10</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>5</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>400</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>2</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
        </ORDER_LINES>
    </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1.     New Report
2.     From Create New Connection-> XML
3.     Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4.     Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
        CUSTOMER_ORDER_CONF_REP_REQUEST
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number                                   Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1                              Billing Address 1
Shipping address 2                              Billing Address 2
Shipping address 3                              Billing Address 3
Shipping address 4                              Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026                      LINE_NO     CUSTOMER_PART_NO          CUSTOMER_PART_DESC     SALE_UNIT_PRICE     PRICE_QTY     DISCOUNT     PRICE_TOTAL
Characteristic details belonging to Order line 1       CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
                                       CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
                                       CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

Problem using JRC 2.0 on Unix with xml data source

Hello,
I am experimenting difficulties using the JRC 2.0 (which I hadn't with the previous version) on a RedHat 4 machine. It takes 7 minutes (only 20 seconds on Windows) to create a pdf (1 page) from a simple report using an xml file as data source.
It takes approximately 2 minutes when opening the report
      > reportClientDoc.open(REPORT_NAME, 0);
then 4 minutes are required to connect the report to the xml data source
      > reportClientDoc.getDatabaseController().setDataSource(xml_ds, "", "");
Have you got any clue on possible reasons for this issue ?
Edited by: florian epiard on Jan 30, 2009 4:33 PM

Hello,
I am experimenting difficulties using the JRC 2.0 (which I hadn't with the previous version) on a RedHat 4 machine. It takes 7 minutes (only 20 seconds on Windows) to create a pdf (1 page) from a simple report using an xml file as data source.
It takes approximately 2 minutes when opening the report
      > reportClientDoc.open(REPORT_NAME, 0);
then 4 minutes are required to connect the report to the xml data source
      > reportClientDoc.getDatabaseController().setDataSource(xml_ds, "", "");
Have you got any clue on possible reasons for this issue ?
Edited by: florian epiard on Jan 30, 2009 4:33 PM

Can Discoverer be used as an XML Data source for XMLP ?

I am wondering if Discoverer can generate an XML Data Source for XMPL.
I have heard that Discoverer Viewer can have XML as an output. Is there a way of using this XML output with XMLP and, if yes, how to batch both steps ?

Hi
My understanding is that Discoverer does not generate XML data as an ouput that XMLP can consume. The XML is does generate is actually an XML RDF for Oracle Reports.
XMLP is integrated thou, when you export your Disco report to PDF thats XMLP doing the conversion to PDF for you.
Regards, Tim

How to Write Log Message in a XML Data Source Report

Hi Friends,
Can anyone help me out what is the process of writing a log file in the XML Data Source Report. for eg: in Plsql we use FND_LOG.PUT_LINE to print the Log message in the Concurrent Request Output. in the similar manner, when we develop a report using XML, where we write Coding in XQuery of XML, what is the process need to follow to print the logs for the XQuery.
Any inputs/Suggestion on this Highly appreciable.
Thanks in advance.

Create an RMI application (for example) that writes the log, and let all logging calls call that remote application.
Something like that is the only feasible way that doesn't require you to have a drive on the remote machine mapped to the local one (which causes its own problems as you could have multiple simultaneous write attempts...).

Logon failed when connecting to XML data source over HTTP

I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
Does the URL for the HTTP data source have to conform to some specific pattern? For example, must the URL end in .xml?
Kelly

Sorry Brian,
This is a public forum, if no one can help you do have the option to purchase a support case:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you
Don

MapViewer with XML data source

Hello all,
We have the MapViewer read data from JDBC data source doing spatial queries. Can any one tell me if I can use XML data source as input to the MapViewer.
We have a data source that is only available thru Web services, we cannot make a database view on the schema.
If not is it planned in the production version.
Thanks

How does the xml data look like? in GML?
If the xml data set is not too large, maybe you can add them (after your application has parsed them) as additional MapViewer GeoFeatures in a map request.
Currently MapViewer (preview or production release of 9.0.4) does not support xml-only datasource.
We will look into incorporating GML or other standard-based xml datasource for a future release of MapViewer.

Delta queue & XML data source

Hi All
Can any body pls tell mme as to what this delta que ais and where is it used and how is it created,and also i want to know what is this XML Data source.
I need to get the data from XI,so i need this integration.
I would be very thank ful if any body cuold suggest me with a link on the notes ar step by step formatt.
Point's will be awarded,Thanks in advance.
Kittu

Hi Jay,
From Delta queue(RSA7) ur BW system is going to fetch the records of R3 or source system.
After extraction process it reaches RSA7 from there when u triggers infopackage
the job is ready to flood ur D.target with records.
Ensure that records are there for corresponding D.source this has to be attained thro' various Update methods(v3).
DataSource that is generated in SAP BW on the basis of a file-DataSource and
that can be used to push data to SAP BW
for more info on creation of XML D.source refer the link
http://help.sap.com/saphelp_nw04/helpdata/en/fe/65d03b3f34d172e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0b/3bc73b24062b48e10000000a11402f/frameset.htm
Reward if it's useful.
Thnks,
Karthick.

Newbie XML data source questions

Post Author: tel
CA Forum: Data Connectivity and SQL
I'm trying to use the XML data source via http and i'm running into a couple of issues.
First, we have separate environments for development, QA, and production. Each environment will have a seperate URL to retrieve the XML for the report. I would like to use the same report design to access each environment. Is there a way to update the URL in the data source (or replace the data source with one that has the correct URL) without having to re-add the fields to the report design?
The second issue is similar. I can't seem to get Crystal to recognize changes in the XML format (new fields for example) without having to delete and recreate the data source (which automatically removes all the associated fields from the report). Is there a way around this, or again, a way of re-creating the data source without it removing the existing fields in the report?
Thanks,

Post Author: rosariosanto
CA Forum: Data Connectivity and SQL
I have the same problem. Where can I find help about setting the data source when connecting to a web service. Since the hostname is hardcoded in the report, it is necessary to update it in the code.

XML Data Source using SSRS intgrated in ShaPoint

Similar Messages

Maybe you are looking for