XML design/suggestions - common format for multiple xml files?

Hi,
I'm working on a project where I need to collect data from different XML files. The format of these xml files differs from eachother, but all information I need can be found in each xml file. (date, time, name, etc..), but the elements have different names. Also the files contains redundant information that I don't need.
So, what is the best method to use if I want to summarize all the data and create a common format for the information?
I would be happy if I could convert to a commom format so, I will basically have all information in one single xml-file.
Many thanks,
-- beachen

Yep, use XSLT to transform them all into the same format.

Similar Messages

Vivado 2013.4 ERROR: [IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order

Hello,
I just downloaded and installed Vivado 2013.4 on my Xubuntu 12.04 machine. But when I try to add IP from the IP catalog, as in the ug937 Lab1 step2, it fails with obscure error messages (see below).
Here's basically what I did:
-In the Flow Navigator, i select the IP Catalog button.
-In the search field of the IP Catalog, I type DDS.
-then I double-click the DDS Compiler and my error occure.
Please Help,
Jerome.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd":1]
Analysis Results[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd":1]
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
set_property target_language Verilog [current_project]
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
sources_1[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd":1]
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
update_compile_order -fileset sim_1
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd":1]
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[HDL 9-1654] Analyzing Verilog file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd":1]
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx/Vivado/2013.4/data/ip'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-1704] No user IP repositories specified
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
Vivado Commands[Project 1-11] Changing the constrs_type of fileset 'constrs_1' to 'XDC'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
sim_1[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1654] Analyzing Verilog file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-234] Refreshing IP repositories
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd":1]
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd":1]
set_property constrs_type XDC [current_fileset -constrset]

We had the same problem when switching to Ubuntu 14.04, and there actually is a solution for it: make sure your locales are set to English.
$> env | grep LC_*
should only show english (or C) locales, all others are known to cause parsing errors in some numbers, usually caused by wrong string-to-float conversions (e.g. 18,29 in german is 18.29 in english). You can change the locales in the file /etc/default/localesThis is not the first time we had problems with the locale settings, Xilinx does not seem to test their software with anything else than en_US, causing obscure bugs like this one.
HTH
Philipp

How to configure for Multiple XML

Hi,
We were successful in working with single xml as a input. Now we are using multiple xml as a input for a single transaction. With the references and the suggestion in documents(working with xml files.pdf) related to Documaker we have changed configuration settings in FSISYS.INI and AFGJOB.JDT.
Down below we have mentioned those changes.
Input Extract file has been changed as F_Sch.DAT; following is the content in the extract file
COM_LOB_1111 .\INPUT\F_SCH1.xml
COM_LOB_1111 .\INPUT\F_SCH2.xml
COM_LOB_1111 .\INPUT\F_SCH3.xml
F_SCH1.xml,F_SCH2.xml,F_SCH3.xml
<?xml version="1.0"?>
<global>
     <lm>
          <COM>COM</COM>
          <LOB>LOB</LOB>
          <TRANSACTIONID>121212</TRANSACTIONID>
     </lm>
     <Foodcard>
          <Accname>Alex</Accname>
          <Email>[email protected]</Email>
          <Accid>1234123412341234</Accid>
          <Accno>1234123412341234</Accno>
          <Accaddr1>address1</Accaddr1>
          <Accaddr2>address2</Accaddr2>
          <Accaddr3>address3</Accaddr3>
     </Foodcard>
</global>
Changes to FSISYS.INI
< ExtractKeyField >
Key = 1,3
SearchMask = 1,COM_LOB_1111
< TRN_FIELDS >
COM = 1,3,N
LOB = 5,3,N
PolicyNum = 9,3,N
< DATA >
ExtrFile = C:\FAP\DLL\Computer\INPUT\F_Sch.DAT
AFGJOB.JDT
;ImportXMLFile;2;SCH=1,COM_LOB_1111 15,19
Inspite of those changes that made, we were not able to generate the output using three xml as a input.
***error details.***
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM17115: : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<XML Parse Error: The 1 chars before error=<C>, the 20 chars starting at error=< >>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<syntax error at line 1 column 0>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10292: in <RULXMLExtract()>: Unable to <DXMLoadXMLRecs()>.
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM13023: in RCBSendToErrBatch(): Unable to assign the transaction to the error batch. The SentToManualBatch field is not defined in the TrnDfdFile.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10947: in NoGenTrnTransactionProc(): Unable to RULLoadXtrRecs(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12018: in RPDoBaseFormsetRulesForward(): Unable to <WINNOGENTRNTRANSACTIONPROC>().
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12066: in RPProcessOneTransaction(): Unable to RPDoBaseFormsetRulesForward(pRPS, RP_PRE_PROC_A).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12064: in RPProcessTransactions(): Unable to RPProcessOneTransaction(pRPS). Skipping the rest of the transactions for this Base. See INI group:< GenDataStopOn > option:TransactionErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12004: in RPProcessOneBase(): Unable to RPProcessTransactions(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12001: in RPProcessBases(): Unable to RPProcessOneBase(pRPS). Skipping the rest of the Bases for this batch run. See INI group:< GenDataStopOn > option:BaseErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12127: in RPRun(): Unable to RPProcessBases(pRPS).
[04:16:51PM] Error: An error occurred during processing.
Kindly let us know in case of any solution for this issue.
Regards,
Balaji R.

It looks like it is unable to load your XML files. Depending on how your configuration is laid out, you may want to list full path names in your extract file - we make use of the same technique in 11.5, which I would imagine isn't terribly different in this respect from 12.0. Our configuration is such that we run Gendata at one level, read an extract file in the deflib folder, and the input files are in an input folder, so each entry in the extract file is C:\fap\mstrres\sampco\input\input1.xml.
Not sure if that is analogous to your setup or not, but based on the errors, either it can't find the file, so it is a pathing issue, or the file contents are invalid.
Tony

Solution need for multiple xml and Flowlist component

Hi! I am using multiple xml and AFComponents AS3 Flowlist component. I am having an issue with the thumbnails in the Flowlist component after about 20 or so user clicks, the images no longer appear, yet the threaded data is still there. http://www.littlewinggames.com/
I have tried changing some publish settings: hardware acceleration to Level-1 Direct and script time limit increased to 30???
Can anyone please help me to find a solution? Greatly appreciated! Lisa [email protected]

Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.

Best Format for Archiving Video Files

I am importing old VHS and 8mm family videos for my cousin, to both burn them to DVD, and to archive the movies in case he wants to edit them later.
I am planning on purchasing for him, a "write once," external HDD, probably firewire, (though I am open to suggestions), to put both the backup Video TS folders on, as well as the Quicktime movies themselves.
My guess is, the best format for the QT movies would be their original DV-NTSC, but at around 13GB an hour, this can add up pretty fast.
The h264 .mov codec looks great, takes forever to render, and it seems the file size difference to DV-NTSC is nominal at best.
Obviously the future is some kind of HD, so these movies will never look great years from now, but I want them to be preserved for him at the best quality possible, at the smallest file size, if it will not compromise the quality too much.
I know I can render them significantly smaller as h264 .mp4 files, or as DIVX, (which also takes a long time), but I imagine they are of significantly reduced quality that would be visible in future video editing he might do.
If DV-NTSC is the only way to go, so be it. But if not, then any suggestions for what other format I could use to save these QT files, without visible loss of quality is greatly appreciated.

Thanks for all the advice. And I mean everyone.
Here is my latest dilemma.
Though 15 years old, the original Vhs's play beautifully. Aside from some (expected) glitches in the beginning or end of some of the shots, the video has not degraded appreciably. This is great news, as my cousin wanted to make back ups before degradation begins.
First, I captured the Vhs movies and corrected some bad color, mostly due to poor white balancing, and on the computer, they looked great in comparison. I burned DVD's and they looked terrible in comparison with the originals. Now I know I am going to lose some resolution when going to DVD, but it seemed harsh, so I ran some tests.
I burned a DVD of the original capture, with no color correction, just the raw footage and the DVD did not look much better, so it wasn't the color correction.
Not satisfied, I made a copy from the FCP timeline straight to Vhs, (I should note, through the ADVC-110.) This looked significantly degraded as well.
Finally, I made a straight dub from Vhs to DVCam, figuring that had to look good, and that also looked significantly degraded, compared to the, (now looking pristine), Vhs original.
As the original Vhs looks so good, what good would a TBC do? Or a proc amp?
Is there some secret to capturing and exporting Vhs that I am missing? Or, will it always look significantly degraded, even straight to DVCam?
+David Murray wrote: There is an industrial way to get good VhS copies but it is extremely expensive+
I don't know what this is, but I am sure it is clearly out of our league, but David M., if you are still following this thread, I'm curious, would this ultra expensive method actually result in a dub that looks like the original? I am actually really shocked at how bad the straight DVCam dub looks. It really does not look much better than the color corrected, computer exported version.
The Vhs tapes of my cousins daughter are as precious to him as anything he has.
As they date back 15 years, he is concerned about the longevity of the tapes.
As there are over forty hours of them, he wants them to be in an editable format, so later he or his daughter can make a highlight reel, or whatever. So thus the QT movie archive/backup on HD.
Whether as Finalcutter said, that this drive, even if unused, and put in a cool dry safe, might not function years down the line, makes it iffy, but what other choice is there for editable versions, unless I break the QT movies up into 20 minute chunks and archive them to over a hundred DVD's instead. Perhaps that is the safest solution, though certainly time consuming.
As failure of the HDD somewhere in the future is likely, though not certain, I am still not sure that the HDD holding all his QT movies for future editing is the wrong way to go.
As it is a digital version, and not an analog copy, I get that a DVCam backup of the originals is the best option. I will suggest to him that we do this as well, even though he does not have DVCam himself. But again, is there something I am missing here? Why does the Vhs to DVCam copy look so degraded? Is there anything I can do to keep the original quality, or will it die with his original Vhs as it slowly degrades over time?

Project Settings for Multiple Video Files?

In PRE 8, I am attempting my first HD project. I have several different types of video files that friends sent me from a sports event, the video files are AVCHD (1920?), QT Movie (1280x720), and QT Movie (1920x1088). When I create a new project, what PROJECT SETTINGS should I select? I am not sure what to select since I am using different video file formats. The video files are currently on my hard drive.
I also have lots of pix (jpg) from different cameras, some are as large as 5184x3456. For the picture files, should I bulk process them through PSE to resize them? If so, what should the maximum size be for the HD project?
Thank you in advance.
Howard

Hi Steve - in the list of NTSC project presets, there is not a "DSLR" selection; there is "AVCHD", "DV", "Hard Disk/Flash", and "HDV". Am I missing something?
As you suggested, I used the "AVCHD 1920x1080" preset for the Vixia files. I imported one 9-second file in the project as a test and the video is choppy after rendering. I have a new HP computer with an I7-930 quad-core processor, 8GB RAM, and an ATI HD 5770 graphics card so I think there is enough cycles to process the video files. Any suggestions?
Thank you very much for answering my questions on a Sunday.
Howard

One Orchestration for Multiple ZIP file FTP Solution.

Problem:
Zip files are being generated from multiple locations on my network. I do not need to see any information in the Zip files. My goal is to pick up the files and transfer them to various external FTP servers.
Solution:
BizTalk picks up the zip file using a pass-through(file) receive port. I created an orchestration because I would like to send email based on failure/success. Inside the orchestration I am using the receive port information to assign the destination party.
The send port then filters based on destination party and sends to external FTP server.
This gives me the ability to have 1 orchestration for multiple transfers. I wanted it to be as generic as possible.
1 Orchestration - 10+ Receive Locations - 8+ External FTP Sites.
Question:
Has anyone done this before? What should I watch out for? Do I have a good solution to my problem?

Yes ,
This is totally a valid business scenario were you have multiple publisher of the message and there are different subscriber( FTP sites ) for your processed message .
You can have multiple receive location inside the same receive port and also multiple send port for different message subscription .
So ,Its all good from your side :)
Thanks|
Abhishek

Getting correct field length when creating formats for delimited flat files

Using Data Services 3.2 to pull in tsv and Excel source files.
When creating a new format for each file, DS tries to intelligently set the field size for each column. However, it seems to sample only a portion of the file. The end result is that it often determines too short a length for a field.
Is there a way to force it to scan an entire file before it sets the field length? Or alternatively, how to get it to at least throw an error instead of silently truncating my data?

I am not aware of any way to force DS to scan the whole file, or to log a warning when it truncates. The field sizes DS sets by using a sample of the data is only really to give you a starting point, you need to try and determine the maximum possible lengths preferably from someone who understands the source of the data or through profiling. But the profiling method will obviously only be based on the data you have at the time of profiling, new data added to the source later could exceed the field lengths. The way I prefer to handle this is to set all the field lengths to longer than expected, eg. varchar(999) and then use a validation transform immediately after reading the file to check for any fields that exceed the maximum allowed for the target system and send these to an error file/table.

Viewing total duration for multiple audio files

I need to be able to view 'total duration', when selecting multiple audio files, e.g. 10 audio files, total duration 42.03. I can't find a way to do this and so far, all I've been able to do is view individual audio file durations, then total them manually (which takes far too long, for what I need to do). I've previously been a Windows user, and this is instantly viewable in Explorer.
I'm new to OS X, and really need to be able to do this for my job. Can anyone help??
Thanks in advance, Marc

Here's an image to explain better:
http://img216.imageshack.us/img216/3241/playlisttotaltime.jpg
However the total time isn't 100% accurate, because I believe iTunes is adding some extra seconds for the gaps in between songs.

Need Preloader for Multiple SWF files

SORRY FOR THE DUPE POST, THE OTHER CAN BE DELETED. MY ADOBE
ID PROFILES WERE MESSED UP.
Hi forums, I'm new to Flash. I did the following:
1. Created a complex home page, about 3.5MB in size, due to a
large graphic I had to use many times over and couldn't make into a
symbol (long story). It's called INDEX.SWF, with accompanying
INDEX.HTML file from Flash
2. Split pieces of the INDEX.SWF file into multiple SWF files
to make it load faster
3. Created multiple layers in INDEX.SWF using loadMovieNum to
call to multiple SWF files from step 2
This works OK, but I think a preloader would optimize my page
animation. However:
1. I don't understand how a preloader file gets recognized on
the site load. If I create a file called PRELOADER.FLA and publish
it, how does the site know to use it first? Does it need a special
name?
2. Once I understand #1 above, I might be able to use some
sample preloader files I've found. It seems like all I have to do
is change the actionscript to point to my main file, but not sure
yet. I'll get to that next once I understand how the file even gets
recognized and loaded. Thanks for your help!

PLEASE DELETE THIS POST AND USE NEWER ONE FROM
MOUSEHOUSESITE, I APOLOGIZE FOR DUPE POST DUE TO MESSED UP ADOBE
ID.

URI format for shared local files

Firefox uses this format to access shared files on a local network... file://///host/path eg file://///computername/sharename/MyDocs/filename.txt.
This format is different from the standard form file://host/path that is used on other browsers eg Windows, Chrome.
This means that Firefox does not give me access to shared files when I have coded the standard format URI into my local HTML documents. Why is Firefox different or non-standard.

hello seebee, apparently file://///host/path is the standard form for a unc path:
"That's five slashes - two for the protocol, one to indicate the root of the file system, then two more to indicate the start of the server name."
<sub>https://stackoverflow.com/questions/5317834/workaround-for-href-file-in-firefox</sub>
it is also explained in this bug from 2001: https://bugzilla.mozilla.org/show_bug.cgi?id=66194#c8

External Hard Drive Formatting For Cross Platform File Sharing

I have been doing some research on formatting options that can read/write both OSX and Win7. Someone recommended that I use UDF. I'm curious hearing from the apple community whether there are any downsides to choosing this formatting method. Are there any other better ones to use? Thanks

Best I can tell, UDF is for DVDs and CDs, not HDDs.
If you want a compatible format for Mac and Windows on a HDD, FAT 32 or ExFAT will fit the bill. Fat32 does have a 4 GB file size limitation. It is best to format these on a PC.
You can use NTFS, but then you need third party software such as Paragon or Tuxere in order to write to the HDD.
Ciao.

How to create a dynamic SSIS package for multiple flat file destinations

Hi,
I have to create a ssis package which has single data flow task and inside that I have 23 source (sql- select * from - statements)- destination (flat files, 23 distinct) connection.
Now for each product I have to create separate SSIS package (i.e. if prod=abc then these read select * from abc_tables and 23 abc_ txt files)
I want to do it dynamically, means only single package and inside that variables will take select * values for each source-dest connection (so i believe 23 variables) and same for destination flat files.
Let me know. :)
ANK HIT - if reply helps, please mark it as ANSWER or helpful post

Sorry It seems you're contradicting yourself. you say I know my source and dest structure and the you're
asking all I want is to have a dynamic structure
what does that mean?
and reading your next sentence
I want to run a package for 5 products, instead of creating 5 ssis packages with 23 source- dest connection, I would
like to have one with only 23 source- dest connections
What I feel is what you're looking for is to have a looping structure to loop through each of the 5
products.
In that case what you could do is this
1. Create a object variable in SSIS
2. Use a Execute SQL Task to populate the variable with all available products (I think you'll have a master table for that). Set ResultSet property to Full ResultSet and then in ResultSet tab map Object variable to 0 th index
3. use a ForEachLoop container with ADO .NET recordset enumerator and map to object variable. Create a variable of datatype same as that of Product identifier field to get individual values out
4. Inside loop create your data flow task with 23 source destination connection. In the query part use a parameter for product field and map it to the variable containing product value to get only data for the product.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Creating cache for multiple property files run time/dynamically.

Hi,
I have a requirement, where in I need to create cache for each property file present in a folder at server side or in the lib or resources directory. Please help me how I can do this?
Thanks.

ok thank you.
I follwed this method implementation:
static HashMap<String, HashMap<Object, String>> cacheHolder = new HashMap<String, HashMap<Object, String>>();
     static HashMap<Object, String>[] cache = new HashMap[2];
     static Integer fileCount = 0;
     static int incrementSize = 2;
public method1(Map<Object,String>map){
File file = new File((new StringBuilder(
                         "ABC/XYZ/")).append(value)
                         .toString()); // where value is the file name returned from the external method
               int newSize = existingMapLength+incrementSize;
               if (someVal== null) {
                    synchronized (fileCount) {
                         int oldSize = cache.length;
                         if(fileCount==cache.length){
                              HashMap[] oldData = new HashMap[oldSize];
                              oldData = cache;
                              cache = new HashMap[newSize];
                              LOGGER.info("New Size added:==>"+cache.length);
                              for(int i=0;i<oldSize;i++){
                                   cache[i] = oldData;
                              cache[fileCount] = readExternalPropertiesFile(file); // external method which returns the properties of the file in hashmap
                              cacheHolder.put(value, cache[fileCount]);
                              keys = cache[fileCount].keySet();
                         else{
                         cache[fileCount] = readPropertiesFile(file);
                         cacheHolder.put(value, cache[fileCount]);
                         keys = cache[fileCount].keySet();
                         someVal= cache[fileCount];
fileCount = fileCount + 1;
Please let me know if any improvemnets are possible.

Changing infomation for multiple video files in itunes

I have been converting TV episodes to play on my iPod touch and when I add them into the iTunes catalog it considers them "movies".
If I “get info” on a single file and go to the "Video" tab, I have the options to select "Video Kind" (the options are Movie, Music Video and TV show) and the option to enter the name of the show. However, if I select several videos and "get info" iTunes gives me the standard choices for changing the identity tags... the same as for a music file.
The best description I can figure to give this is an ID3 tag for video... anyhew, on to my question.
I have converted the full run of South Park (don't worry they were recorded digitally from TV and I am using them myself)and that is A LOT of episodes if I were to go into each file individually. Is there a way to select a number of video files and select "TV Show" and have them all marked with South Park as the show title?
Also, if I can't do it in iTunes, is there a 3rd party application that will allow me to do it.
Thanks for any help,
NOS

This shortcoming of iTunes has bothered many of us for a long time. All the TV shows I offload to DVD-R for space and then later bring back into iTunes become "Movie" again, and I have to fix each one. There is no way to batch-edit the Video Kind choice in iTunes.
The easiest workaround I've found is to select the first TV show in the playlist or library, Get Info, change the video kind to "TV Show," and then use the Next button. The Video Kind box will remain active, and you can press arrow-down on the keyboard to choose "TV Show" again. Click Next, arrow-down, click Next, arrow-down . . . Soon you will have fixed all the files in the list.
Now start at the top again and type "South Park" into the Show field. Copy the words. Click Next, and paste the words. Next, paste, Next, paste . . . Now you will have given all the shows the correct name.
Another oddness about this Video tab: See the box for episode number? ITunes doesn't use that in the TV Shows library. It uses the music track number on the General tab.

XML design/suggestions - common format for multiple xml files?

Similar Messages

Maybe you are looking for