XML file being written to and queried are in two different language dir

I have a script that writes out an XML file and will read it back for checking purposes. I then have a different  script that will read the XML file and act upon it (in this case for Open, Closed for Severe wWeather, Closed for Holiday, etc). What happens is that when I write to the XML file the file is put into the Documant Management/en_US folder. When I try to red from the file it reads from the Document Management/en folder (which is proabably a hold over from our previous versions).
So, I look into the System/Language area and see that the IVR language configuration is en_US and the Default IVR Configuration Language is set to en. So, I changed the second one to be en_US.
Now, when I try to read the file it reads from the en_US folder so everything looks great. But, now when I try to write the file it writes to the en folder.
If I switch the Default IVR Configuration Language back to en, everything goes back to how it worked at the beginning of the note.
So, I have been fighting with this for a few days now and cannot figure out why the system will not read and write from/to the same folder. Can anyone come up with a reason? I see nothing in the scripts that specify a different folder so I am utterly confused. With it jumping between folders I feel like I am in some Abbott and Costello film....
Thanks for any help
Dave

The good news is we can be lazy but first to check one more thing: Is your Trigger set to use the System Default language, en_US, or en?  If it's set to en that might explain the inconsistancy.
Now the lazy part: when the engine cannot find a document in en_US it is supposed to auto-search the en and then default folders as well. So, you should be able to let it write to en and read from en_US because when it doesn't find it in en_US it should go look in en and then default anyways.
If none of that is working either then I declare shenanigans, I mean defect! Time to open a TAC SR.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

  • Large XML files, how to split and read them in PI

    Hi,
    For a specific requirement, we have a 60 MB-90 MB XML file being generated by a legacy application.
    This file has to be processed by PI 7.31 Sender File Adapter and should be posted as a ABAP proxy to SAP ECC system.
    To address any performance issues, we are planning to read the files in chunks.
    Is there a way by which we can configure the file adapter to pick a fixed no.of records to limit the size.
    In inputs in this regard will be appreciated.
    regards,
    Younus

    Hi Younus,
    First of all if you are using PI 7.31, then you should be quite able to process XML file of about 100MB scale. Performance issue shall occur in ECC side instead as it can not handle such high volume.
    My suggestion will be to pick the whole XML file at one go and do necessary mapping. However on receiver side use SOAP Adapter instead of XI for making proxy calls to ECC.
    In SOAP adapter (using HTTP as Transport and XI 3.0 as Message protocol) there's an option as 'XI Packaging' which can be used to send data in packets.
    Refer below help doc on it.
    Configuring the Receiver SOAP Adapter - Advanced Adapter Engine - SAP Library
    Thanks
    Bibek

  • How to get Hierarchical XML File from a Database Join Query !

    Hi,
    How can i get a Hierarchical XML File from a Database Join Query ?
    Any join query returns repeated values as below:
    BD17:SQL>select d.dname, e.ename, e.sal
    2 from dept d
    3 natural join
    4 emp e
    5 /
    DNAME ENAME SAL
    ACCOUNTING CLARK 2450
    ACCOUNTING KING 5000
    ACCOUNTING MILLER 1300
    RESEARCH SMITH 800
    RESEARCH ADAMS 1100
    RESEARCH FORD 3000
    RESEARCH SCOTT 3000
    RESEARCH JONES 2975
    SALES ALLEN 1600
    SALES BLAKE 2850
    SALES MARTIN 1250
    SALES JAMES 950
    SALES TURNER 1500
    SALES WARD 1250
    14 rows selected.
    We tried use DBMS_XMLQUERY to generate a xml file, but it was unable to get xml in Hierarchical format.
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    - <ROWSET>
    - <ROW num="1">
    <DNAME>ACCOUNTING</DNAME>
    <ENAME>CLARK</ENAME>
    <SAL>2450</SAL>
    </ROW>
    - <ROW num="2">
    <DNAME>ACCOUNTING</DNAME>
    <ENAME>KING</ENAME>
    <SAL>5000</SAL>
    </ROW>
    - <ROW num="3">
    <DNAME>ACCOUNTING</DNAME>
    <ENAME>MILLER</ENAME>
    <SAL>1300</SAL>
    </ROW>
    - <ROW num="4">
    <DNAME>RESEARCH</DNAME>
    <ENAME>SMITH</ENAME>
    <SAL>800</SAL>
    </ROW>
    - <ROW num="5">
    <DNAME>RESEARCH</DNAME>
    <ENAME>ADAMS</ENAME>
    <SAL>1100</SAL>
    </ROW>
    - <ROW num="6">
    <DNAME>RESEARCH</DNAME>
    <ENAME>FORD</ENAME>
    <SAL>3000</SAL>
    </ROW>
    - <ROW num="7">
    <DNAME>RESEARCH</DNAME>
    <ENAME>SCOTT</ENAME>
    <SAL>3000</SAL>
    </ROW>
    - <ROW num="8">
    <DNAME>RESEARCH</DNAME>
    <ENAME>JONES</ENAME>
    <SAL>2975</SAL>
    </ROW>
    - <ROW num="9">
    <DNAME>SALES</DNAME>
    <ENAME>ALLEN</ENAME>
    <SAL>1600</SAL>
    </ROW>
    - <ROW num="10">
    <DNAME>SALES</DNAME>
    <ENAME>BLAKE</ENAME>
    <SAL>2850</SAL>
    </ROW>
    - <ROW num="11">
    <DNAME>SALES</DNAME>
    <ENAME>MARTIN</ENAME>
    <SAL>1250</SAL>
    </ROW>
    - <ROW num="12">
    <DNAME>SALES</DNAME>
    <ENAME>JAMES</ENAME>
    <SAL>950</SAL>
    </ROW>
    - <ROW num="13">
    <DNAME>SALES</DNAME>
    <ENAME>TURNER</ENAME>
    <SAL>1500</SAL>
    </ROW>
    - <ROW num="14">
    <DNAME>SALES</DNAME>
    <ENAME>WARD</ENAME>
    <SAL>1250</SAL>
    </ROW>
    </ROWSET>
    Thank you for some help.
    Nelson Alberti

    Hi,
    I wrote a general ABAP program which can be configured to grab contrent from an URL and post that content as a new PI message into the integration adapter .... from that point on normal PI configuration can be used to route it to anywhere ...
    It can be easily scheduled as a background job to grab content on a daily basis etc ...
    Regards,
    Steven

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

    Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

    Are you in DSL? Do you know if your modem is bridged?
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

    I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

    Thanks, this is not an ideal answer but probably the most sensible one in my case.
    I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
    I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

  • Video files of type *.flv and *.f4v are considered Flash files, how play them (win7)

    video files of type *.flv and *.f4v are considered Flash files, how play them (win7) are files in file windows explorer?

    Not sure what you are saying; are these local or online files?
    Adobe does not longer provide Adobe Media Player to play local files; use a 3rd-party player like VLC Media Player.

  • The photo book review pdf file is fully smudged and there are many horizontal lines all over the pictures. the book looks absolutely ok , but the pdf is showing all problems. also when i uploaded the book, it was successful, but got an error message later

    I created a book on I photo and uploaded it yesterday. it was all ok and the order was accepted. However i got an error message today. The book looks perfect on I Photo, when i do a preview, the PDF file is totally smudged and there are 100s of horizontal lines all over the photos. Also the coloures are bleeding all over.
    what can be the case and how can i resolve this.
    samir

    if the book looks good order while in safe mode - then reboot into normal mode
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    Apple will stand behind the order if it does not match your preview
    LN

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my com

    My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my computer and load them in my LR. The photos appear but witthout any editing or tagging. We need to be able to have her working on the photos on her computer with her copy of LR and me on my computer with my version of LR being able to access what is already tagged and given back to me. This seems hard. We need advice on if it is at all possible to have two computers simultaneously working on LR . I bought her her own version because I was told at the time of purchasing that that was the only way to share. Please advise urgently! Thanks.

    Sounds like your assistant isn't instructing Lightroom to write the tagging and editing to the files themselves, so wehn the files return to you, they don't have editing and tagging information. She need to select the photos in Lightroom and then Ctrl-S (Cmd-S on Mac). Or alternatively turn on the option to autmoatically write this information to the files.
    If you are using RAW photos, then this information will be written to a sidecar XMP file, and your assistant must provide you with the sidecar file. If these photos are not RAW photos, then the information is written directly into the photo file itself.
    Lightroom wasn't designed to be a multi-user program, and so it is truly not possible to have two people working on the same catalog at once. The way you are doing things, as modified above, is probably the way to go.
    As an alternative, you can transfer (portions of) catalogs as well as photos back and forth and then all of these issues disappear, but a catalog might be rather large for a flash drive (or maybe not, it depends)

  • I only want itunes to hold the lossless files which are in two different folders. How do I do that?

    I have thousands of MP3 files which I no longer use and which are in my itunes library.
    I want itunes (version 11) to have in it's library only the MS Lossless format and the ALAC lossless format which are in two different folders. How do I achieve this?

    Delete the files you don't want, or cut & paste them to an alternate location if you want to archive them.
    What MS Lossless format? .wav?
    iTunes doesn't have any custom organization features, but you can change the location of the media folder and then selectively consolidate content to the new folder. This creates copies so you have to manually delete the originals. Alternatively I have a script called ConsolidateByMoving which does what it suggests. Thiis could be used to split the media into parallel subfolders within your existing media folder if you disable iTunes "Keep iTunes Media folder organized" option.
    tt2

  • Logical systems assignment when SRM and ECC are on 2 different servers

    Hi SRM guru's,
    What is the standard practice for Logical system creation and assignment when  ECC and SRM are on 2 different servers.
    I could not able to find which i created a logical system  in SRM server which i created in ECC
    Same for the ECC also.
    how do i assign logical system of SRM to ECC
    vice versa.
    your prompt response is appreciated.
    Regards

    Hi Sai,
    Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
    As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
    Logical System : <SID>CLNT<Client Number>
    For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
    You can refer the below document which eplains the creation of logical system and RFC destinations etc
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    Note: Only while configuring the RFC Destination, the servers will play a crucial role.
    Regards
    Kathirvel

  • How do I get all the songs from an album to show in the album view?  Currently, if an album lists the artist plus a guest artist, those are shown separately and appear to be two different albums on my iPod.  How do I get all the songs on that album togeth

    How do I get all the songs from an album to show in the album view?  Currently, if an album lists the artist plus a guest artist, those are shown separately and appear to be two different albums on my iPod.  How do I get all the songs on that album together on my iPod?  If the album is a collaboration wtih many artists, each sond may appear as a separate album.

    I used to have this problem.
    First, you need to go back on iTunes
    you need to go to each of the songs that are having this problem
    Click the album so all the songs drop down
    Right click the songs that have this problem
    Click ' Get info '
    Click the tab that says " info '
    The box that says ' album artist ' should probably be empty (correct me if I'm wrong)
    Click it and type the artist of the entire album, NOT the songs guest artist
    as such,
    ARTIST
    JAY-Z Feat. Justin Timberlake
    ALBUM ARTIST
    JAY-Z
    These should be separate for each artist
    If you write the same album artists for each song by that artist, all the songs should be on 1 album

  • Service Contract and Service Quote, Are they two different application or s

    Service Contract and Service Quote, Are they two different application or same application ?
    What is the difference ?
    thanks
    siva

    Siva
    There is no application called Service Quote (But we can have services in the quoting lines).
    Thanks
    Nagamohan

  • I have an iPad and an iPhone 6. They are on two different Apple ids. How do I do I change the Apple id on my phone to match my iPad?

    I have an iPad and an iPhone 6. They are on two different Apple ids. How do I do I change the Apple id on my phone to match my iPad?

    On the phone, go to Settings, and change the iCloud and iTunes Store AppleIDs (sign out of the one you have, sign into the one you want). Note that you can't transfer apps from one AppleID to another, so you may still be prompted for your old AppleID password to update any apps that you installed under that ID.
    Matt

Maybe you are looking for