XML file from '08 has a different aspect ratio in FCP 6?

I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I get a display issue with black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the? and for the life of me, I've re imported using 16:9, no difference...I have no idea what's going on.
Any help would be greatly appreciated!

You should really take this to the Final Cut Pro forum as the codecs and the interface is different for Final Cut Express.

Similar Messages

XML imported from iM '08 has a different aspect ratio in FCP 6?

I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I get a display issue with black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the? and for the life of me, I've re imported using 16:9, no difference...I have no idea what's going on.
Any help would be greatly appreciated!

Found the answer, and pretty simple too....yeesh. just click on your clip and go to setting>conform to sequence.

Fixing different aspect ratios in FCP 4

I need help!!
I shot a wedding yesterday using 3 different cameras, all with different 16:9 aspect ratios. I used a panasonic, sony and cannon. The sony and cannon has the anamophic squeze while the panasonic has the letterbox outline. Is there a way to pull back and slap the footage shot with the sony and cannon in a letterbox frame to match the panasonic?
thanks in advance.

http://proappstuff.com/proapptipsvideotutorials/879F6B61-CFF9-4FD1-8D43-FDF89605 611A/6ECEC931-47F1-4BC1-8CD4-41FE4842B45D.html
That might answer it for you.
CaptM

Read XML file from different server on JSP

Dear All,
I am a newbie to JSP with XML, now i want to read the "test.xml" from JSP.
I read successfully this "test.xml" file from my system and I got output, but I need to read the xml file from
different server like "http://www.domain.com/test.xml". I couldn't read such a type of file from different server.
Is it possible to read a xml file from different server?
If anybody have idea please let me know.
Thanks in Advance,
Prasath.
<%@ page import="java.sql.*,java.io.*,java.util.*,javax.xml.parsers.*,org.w3c.dom.*,org.xml.sax.*" %>
<%
try {
 DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
 DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
 Document doc = docBuilder.parse (new File("http://www.domain.com/test.xml"));
 // normalize text representation
 doc.getDocumentElement ().normalize ();
 out.println ("Root element of the doc is " +
 doc.getDocumentElement().getNodeName()+" ");
 NodeList listOfPersons = doc.getElementsByTagName("person");
 int totalPersons = listOfPersons.getLength();
 out.println("Total no of people : " + totalPersons+" ");
 for(int s=0; s<listOfPersons.getLength() ; s++){
 Node firstPersonNode = listOfPersons.item(s);
 if(firstPersonNode.getNodeType() == Node.ELEMENT_NODE){
 Element firstPersonElement = (Element)firstPersonNode;
 NodeList firstNameList = firstPersonElement.getElementsByTagName("first");
 Element firstNameElement = (Element)firstNameList.item(0);
 NodeList textFNList = firstNameElement.getChildNodes();
 out.println("First Name : " +
 ((Node)textFNList.item(0)).getNodeValue().trim()+" ");
 NodeList lastNameList = firstPersonElement.getElementsByTagName("last");
 Element lastNameElement = (Element)lastNameList.item(0);
 NodeList textLNList = lastNameElement.getChildNodes();
 out.println("Last Name : " +
 ((Node)textLNList.item(0)).getNodeValue().trim()+" ");
 NodeList ageList = firstPersonElement.getElementsByTagName("age");
 Element ageElement = (Element)ageList.item(0);
 NodeList textAgeList = ageElement.getChildNodes();
 out.println("Age : " +
 ((Node)textAgeList.item(0)).getNodeValue().trim()+" ");
 }//end of if clause
 }//end of for loop with s var
}catch (SAXParseException err) {
out.println ("** Parsing error" + ", line "
 + err.getLineNumber () + ", uri " + err.getSystemId ());
out.println(" " + err.getMessage ());
}catch (SAXException e) {
Exception x = e.getException ();
((x == null) ? e : x).printStackTrace ();
}catch (Throwable t) {
t.printStackTrace ();
%>

You might try:
Document doc = docBuilder.parse ("http://www.domain.com/test.xml");Alternatively use the java.net package to obtain an Input Stream to the xml document
InputStream in = methodThatYouWriteYourselfCalledgetInputStreamForURI("http://www.domain.com/test.xml");
Document doc = docBuilder.parse (in);cheers,
evnafets

Load XML file from different location?

Hi All,
I've been going through an exercise by Karl Matthews to load XML data into an AIR App:
http://www.adobe.com/devnet/air/flex/articles/xml_viewer_on_air.html
but I would like to change where the XML file used in the project is retrieved from.
Currently the XML file is loaded from here:

<mx:HTTPService id="srcData" url="
assets/UserGuide.xml" result="loadModelData(event)"
/>
but I would like to load the XML file from one of these locations instead:
File.userDirectory:
File.documentsDirectory:
Can someone please show me how I should change the above code to accomplish this, as my efforts to date have not been successful :-(
I am using Flex Builder 3 and Air 1.5.
Thanks heaps!
Tim

Hi Bhasker,
Thank you for replying.
I am not very good at all this coding, but I am assuming I should now be doing entering the following:
=======================
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication
xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"width="
800" height="660"xmlns:comp="
*" xmlns:fmtComp="fmtComps.*"creationComplete="srcData.send()"
paddingLeft="
0" paddingRight="0" paddingTop="0" paddingBottom="0">
<mx:Script>
<![CDATA[
import mx.utils.ObjectProxy;
import mx.rpc.events.ResultEvent;
Bindable]
private var userManualObj:ObjectProxy;
private function loadModelData(event:ResultEvent):void
userManualObj=event.result.UserManual;
private function readXMLContent(xmlFile:File,objContentView:Object):Array{
var reportDir:File = File.userDirectory.resolvePath("assets");
var xmlFile:File;
var fileStream:FileStream = new FileStream(); xmlFile = reportDir.resolvePath(
"UserGuide.xml");
if(xmlFile.exists && xmlFile.size > 0)// Checking if the impressions.xml file already exists and the file is not empty
var stream:FileStream = new FileStream();
var xml:XML = new XML();stream.open(xmlFile, FileMode.READ);
xml = XML(stream.readUTFBytes(stream.bytesAvailable));
stream.close();
]]>
</mx:Script>

<mx:VBox width="100%" horizontalAlign="left" height="100%" paddingBottom="
0" paddingLeft="0" paddingRight="0" paddingTop="0">
<mx:TabNavigator width="100%" height="100%"paddingBottom="
0" paddingLeft="0" paddingRight="0" paddingTop="0">
<mx:Repeater id="modelsRep" dataProvider="{userManualObj.Product.Model}">
<mx:VBox label="{modelsRep.currentItem.Name}" width="100%" height="100%">
<comp:ModelDesc model="{modelsRep.currentItem}"/>
</mx:VBox>
</mx:Repeater>
<mx:VBox label="Troubleshooting" width="100%" height="100%"paddingBottom="
0" paddingLeft="0" paddingRight="0" paddingTop="0">
<comp:Troubleshooting issues="{userManualObj.Product.Troubleshooting.Issue}" />
</mx:VBox>
</mx:TabNavigator>
</mx:VBox></mx:WindowedApplication>
=======================
and create and "assets" folder in my user directory placing the XML file in there?
However when I do all that, I get this error when I try to compile:
Encountered errors or warnings while building project main.mxml.
main.mxml: Function does not return a value.
Any thoughts?
Many thanks,
Tim

Error while retreiving xml file from database

Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.

After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

Load XML file from addon domain without cross-domain Policy file

Hello.
Assuming that there are two addon domains on the same server: /public_html/domain1.com and /public_html/domain2.com
I try to load XML file from domain2.com into domain1.com without using cross-domain policy file (since it doesn’t work on xml files in my case).
So the idea is to use php file in order to load XML and read it back to flash.
I’ve found an interesting scripts that seems to do the job but unfortunately I can't get it to work. In my opinion there is somewhere problem with AS3 part. Please take a look.
Here are the AS3/PHP scripts:
AS3 (.swf in www.domain1.com):
// location of the xml that you would like to load, full http address
var xmlLoc:String = "http://www.domain2.com/MyFile.xml";
// location of the php xml grabber file, in relation to the .swf
var phpLoc:String = "loadXML.php";
var xml:XML;
var loader:URLLoader = new URLLoader();
var request:URLRequest = new URLRequest(phpLoc+"?location="+escape(xmlLoc) );
loader.addEventListener(Event.COMPLETE, onXMLLoaded);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOErrorHandler);
loader.load(request);
function onIOErrorHandler(e:IOErrorEvent):void {
 trace("There was an error with the xml file "+e);
function onXMLLoaded(e:Event):void {
 trace("the rss feed has been loaded");
 xml = new XML(loader.data);
 // set to string, since it is passed back from php as an object
 xml = XML(xml.toString());
 xml_txt.text = xml;
PHP (loadXML.php in www.domain1.com):
<?php
header("Content-type: text/xml");
$location = "";
if(isset($_GET["location"])) {
 $location = $_GET["location"];
 $location = urldecode($location);
$xml_string = getData($location);
// pass the url encoded vars back to Flash
echo $xml_string;
//cURLs a URL and returns it
function getData($query) {
 // create curl resource
 $ch = curl_init();
 // cURL url
 curl_setopt($ch, CURLOPT_URL, $query);
 //Set some necessary params for using CURL
 curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
 curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
 //Execute the curl function, and decode the returned JSON data
 $result = curl_exec($ch);
 return $result;
 // close curl resource to free up system resources
 curl_close($ch);
?>

I think you might be right about permissions/settings on the server for php. Unfortunately I'm not allowed to adjust them.
So I wrote my own script - this time I used file path instead of http address of the XML file. It works fine in my case.
Here it is:
XML file on domain2.com:
<?xml version="1.0" encoding="UTF-8"?>
<gallery>
 <image imagePath="galleries/gallery_1/images/1.jpg" thumbPath="galleries/gallery_1/thumbs/1.jpg" file_name= "1"> </image>
 <image imagePath="galleries/gallery_1/images/2.jpg" thumbPath="galleries/gallery_1/thumbs/2.jpg" file_name= "2"> </image>
 <image imagePath="galleries/gallery_1/images/3.jpg" thumbPath="galleries/gallery_1/thumbs/3.jpg" file_name= "3"> </image>
</gallery>
swf on domain1.com:
var imagesXML:XML;
var variables:URLVariables = new URLVariables();
var varURL:URLRequest = new URLRequest("MyPHPfile.php");
varURL.method = URLRequestMethod.POST;
varURL.data = variables;
var MyLoader:URLLoader = new URLLoader;
MyLoader.dataFormat =URLLoaderDataFormat.VARIABLES;
MyLoader.addEventListener(Event.COMPLETE, XMLDone);
MyLoader.load(varURL);
function XMLDone(event:Event):void {
 var imported_XML:Object = event.target.data.imported_XML;
 imagesXML = new XML(imported_XML);
 MyTextfield_1.text = imagesXML;
 MyTextfield_2.text = imagesXML.image[0].attribute("thumbPath"); // sample reference to attribute "thumbPath" of the first element
php file on domain1.com:
<?php
$xml_file = simplexml_load_file('../../domain2.com/galleries/gallery_1/MyXMLfile.xml'); // directory to XML file on the same server
$imported_XML = $xml_file->asXML();
print "imported_XML=" . $imported_XML;
?>
Regards
PS: for those who read the above discussion: the first and the second script work but you must test which one is better in your situation. The first script will also work between two domains on different servers. No cross domain policy file needed.

How to create a proxy to retrieve the xml file from web services

Hi Every one,
We have a requirment where we receive a xml file from Kenexa, a third party HR tool using a middleware tool. from SAP side We have to create a proxy to retrieve the xml file from web services by initiating call through middleware tool i used earlier.
these are the steps i intend to follow to accomlish the requirement.
1) middleware tool has to initiate the call to kenexa web services to receive the xml file when it is available.
2) On SAP we need to create a ABAP Proxy service provider to middleware where this file can be received.
Can any one guide me how i can create a proxy to retrieve the xml file from web services by initiating call through other middlewre (its not PI).
Any help would be really great, i am not a ABAP developer, so please help me with this. Thanks.

Thank for reply.
The computers are in different locations, but yes it's possible, the users in this enviroment are all local administrator of the machines, and we can distribute the script centrally from the DC automatically
Acrobat use Java, right? I'm not so expert in java, but something about it could not be so difficult to manage.
Do you know some place where i can get some info about JS and acrobat?

Creating an xml file from abap code

Hello All,
Please let me know which FM do I need to execute in order to create an XML file from my ABAP code ?
Thanks in advance,
Paul.

This has been discussed before
XML files from ABAP programs

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

Generate multiple XML files from one Invoices file in AR Selected Invoices

I have converted our Oracle EBS 11i Selected Invoice RAXINV.rdf to XML and created a template for XML Bursting. I'm bursting fine at the:
/ZRAXINV/LIST_G_ORDER_BY/G_ORDER_BY/LIST_G_CF_NO/G_CF_NO. My question is since I'm writing out my pdf output invoices to the filesystem on Sharepoint; I also need to archive the XML part of each invoice broken down by the same group as .//LIST_G_CF_NO/G_CF_NO. When I convert the rdf to XML it produces one XML file from which I created the templates.
My requirement is to archive both the individual invoices from the templates and the corresponding XML pieces on Sharepoint so that we will be able to search and link the xml to the pdf written out to the filesystem on Sharepoint.
Any idea how should go about this requirement will be much appreciated.
Thanks,
Leo

So how does it take this file
file>
<statement>
<name>John Dow </name>
<address>123 Main</address>
<phone>972-213-3434</phone>
</statement>
<statement>
<name>Jane Dow </name>
<address>345 Main</address>
<phone>972-213-3534</phone>
</statement>
<statement>
<name>Marry Dow </name>
<address>678 Main</address>
<phone>972-213-3435</phone>
</statement>
</file>
and create these three different one?
1.)
<statement>
<name>John Dow </name>
<address>123 Main</address>
<phone>972-213-3434</phone>
</statement>
2.)
<statement>
<name>Jane Dow </name>
<address>345 Main</address>
<phone>972-213-3534</phone>
</statement>
3.)
<statement>
<name>Marry Dow </name>
<address>678 Main</address>
<phone>972-213-3435</phone>
</statement>
Is it not going to just grab each element after the file tag? I'm just confused about that.

Best Practices:: How to generate XML file from a ResultSet

Hi all,
Could someone please suggest the best practices of how to generate an XML file from a resultset? I am developing a web application in Java with Oracle database and one of my tasks is to generate an XML file when the user, for example, click a "download as XML" button on the JSP. The application is basically like an Order with line items. I am using Struts and my first thought has been to have an action class which will extend struts's DownloadAction and through StAX's Iterator API to create an XML file. I intend to have a POJO which will have properties of all columns of my order and line items tables so that for each order I get all line items and:
1. Write order details then
2. Through an iterator write line items of that order to an XML file.
I will greatly appreciate for comments or suggestions on the best way to do this through any pointers on the Web.
alex

Use a OracleWebRowSet in which an XML representation of the result set may be obtained.
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/files/oracle10g/webrowset/Readme.html
http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/jcrowset.htm

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

Genareting a xml file from Forms6i..

I want to generete a xml file from database with using forms6i.
The procedures of XSU generate a xml file output on the server
which database has been loaded.And it works on SQL Plus..How can
I gAnerate xml file from database on clint side with using
Forms6i and XSU??
Thanks for your helps..

You can use the PLSQL xdk. This way you can use PLSQL to create
and transform your XML.
succes

XML file from '08 has a different aspect ratio in FCP 6?

Similar Messages

Maybe you are looking for