XML Format not poper For receiver File Adapter

I am using XML File to xML File scenario. My receiver is SAP R/3 system. When I send file from another system, It is properly seen in payload but the file is not properly recived on SAP R/3. The XML File appears on single line and when seen on SAP side side the fileis cut after some length. Any help is appreciated.

hi,
>>>The XML File appears on single line and when seen on SAP side side the fileis cut after some length. Any help is appreciated.
it's probably not the XML file file that is corrupter but the way you view the file
do you open it from AL11? if so it does not show the whole file
PI/XI does not cut XML files for sure
Regards,
Michal Krawczyk

Similar Messages

Dynamic File Name for Receiver File Adapter

Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

Attachments for receiver file adapter

Hello gurus,
I think receiver file adapter does not support attachments. But I do have a scenario where I receive additional files as SOAP payloads accompanying the request message and I have to write them to a network directory. How can I achieve this?
Regards,
Gökhan

Hi Gokhan,
Please have a look at the following links and see if it helps
Re: File adapter with attachment to mail
Re: How to use File Adapter to transport files
Best Regards

OS Command for receiver file adapter

Hi Guys,
I have a requirement that in the target folder before putting the file, I have to rename the exisitng file then put the file. The target folder is in another machine and I have to use FTP option to send file.
is it possible to use OS command after processing option in the receiver file adapter to do this? please let me know how to handle this.
Thanks
Mukesh

Mukesh,
You cannot rename the file in the FTP folder. What you can do is write a OS script where it logs in into the FTP site and renames the file. Then use this OS script before message processing so that it renames the file before you write the actual file.
If you want to rename a file which is on the applicaiton server using NFS then you can directly rename it from the command prompt.
Regards,
---Satish

Variable Substitution settings for Receiver File Adapter

Hi All,
I wanna use variables for File Name Sheme in the File Access Parameters.I had used by enclosing the variable names within %. When i wanna substitute values for those variables, it is given in the documentation(help.sap.com) that v need to set the Enable indicator. only after setting the indiactor, v can use the variables and can then enter the values for those variables in a table. but i can't see either the indicator or the table in my editor. how can i provide the values for the variables used in file name scheme/Target Directory. and for ur information,i'm using sp12.
any help wud b appreciated.
thnx
Anil

Hi Anil,
Please check out the following link ...
Re: Variable substitution - Pseudo Path Variable - file adapter
Re: Variable substitution problem
Regards,
Raj

REG: Acknowledgement for receiver file adapter

Hi All,
I have a scenario where i need to make a rfc call to update SAP table after the file is placed in the target folder. Can this be acheived without using BPM.
Thanks,
Siva

Hi Siva,
I think this cannot be achieved without BPM. You need to go ahead with BPM.
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
http://www.sap-xi.com/sap-xi-scenario-rfc-file.html
Thanks,

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
 message1
 SD01_E
 FileName
 row
 message2
 SD02_E
 FileName
 row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Encoding issue in receiver file adapter

Hi experts,
I am having a file to file scenario using integrated configuration where i am using file encoding 'US-ASCII' for converting the target file to ASCII and its not working.
Is there any other settings need to be done in the receiver file adapter to convert to 'ASCII' encoding format?
Do we have any other method to convert to 'ASCII' format for the receiver file?
.txt file is used for this interface.
Thanks!

Hi Mahakrishnan,
What is the format of file mentioned in sender file adapter? If SAP-PI is receiving File format in US-ASCII. Then mention US-ASCII in sender communication channel in file encoding field,file type will be text. In case the file format received by SAP-PI is normal text file then by default sender adapter will convert it to UTF-8. Maintain the file type=text and encoding=US-ASCII for receiver file adapter also.
ASCII is an alias for US-ASCII file encoding, hence both mean the same encoding. Thus this format should work. If its still not working please refer to SAP note 821267.
Regards
Anupam
Edited by: anupamsap on Mar 9, 2012 5:47 AM

Receiver File adapter content conversion using StrictXml2PlainBean

Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name parameter value
recordTypes Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator |\n
FileTrailer.fieldSeparator |
Header.endSeparator |\n
Header.fieldSeparator |
TransactionDetail.endSeparator |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
 Header 0...1
 Transaction 0....Unbounded
 TransactionHeader 1..1
 TransactionDetail 0...unbounded
 TransactionTrailer 1...1
 FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AM

Hi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
 <TransactionHeader> 1..1
 </TransactionHeader>
 <TransactionDetail> 0...Unbounded
 </TransactionDetail>
 <TransactionTrailer>1...1
 </TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM

Output CSV File Naming Convention - Receiver File Adapter

Dear SAP experts,
I need help regarding my scenario.
My scenario is this, Customer will send EDI message to XI. XI will then translate the message and convert it into XML.. After, a Receiver File Adapter will receive the XML then convert it into .csv file.
I've already configured the Receiver File Adapter to convert the XML into .csv file.
But, my problem now is how will I configure to have my output .csv file has a File Naming Convention.
The output .csv file must be "CustomerName_YearMonthDate".
From the EDI message, there is indicated Sender GLN in which, each customer has its own Sender GLN.
E.g., Globus --> 200, Karstadt --> 300, Metro --> 400.
How will I configure so that I can have an output .csv file of,
If Globus sends the EDI message, the output .csv file is Globus_20080304.csv.
If Karstadt, Karstadt_20080304.csv.
If Metro, Metro_20080304.csv.
Kindly advise for a clear and complete solution.
Thank you very much for your usual support.
Fred

Hi Nisar,
My target message (XML) in the mapping is this,
- <ns0:CSV>
 - <SLI>
 <PERIO> </PERIO>
 <ILN> </ILN?
 <EAN> </EAN>
perio, iln, and ean was rooted on SLI field. and the CSV is the rootnode of the target message.
I have created a UDF on the message mapping to accomodate the output customer name, here is the codes:
String fname="";
if(GLN.equals("23456"))
fname ="Globus" +dat;
else if(GLN.equals("5678"))
fname ="Karstadt"+dat;
else if(GLN.equals("6789"))
fname ="Metro"+dat;
DynamicConfiguration conf = (DynamicConfiguration) container
 .getTransformationParameters()
 .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
 "http://sap.com/xi/XI/System/File",
 "FileName");
 conf.put(key,fname );
E.g.,
Globus --> 23456 (Sender GLN)
Karstadt --> 5678 (Sender GLN)
Metro --> 6789 (Sender GLN)
This UDF i've made in the Message Mapping was mapped in the root node CSV.
Is this UDF correct?
Then on the File Receiver Configurations, here are the configs,
Transport Protocol: File System (NFS)
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
File Access Parameters
Target Directory: /var/opt/gsss/sample/csv
File Name Scheme: .csv
Processing Parameters
File Construction Mode: Create
- Overwrite Existing File
Write Mode: Directly
File Type: Text
Variable Substitution --> ???
Adapter Specific Message Attributes
- Use Adapter-Specific Message Attributes
- Fail if Adapter-Specific Message Attributes Missing
- File Name
Run Operating System Command After Message Processing
Command Line: chmod 664%F
Content Conversion Parameters
Recordset Structure: SLI
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;ILN;EAN
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
Adapter Status:
Status: Active
Kindly advise if my configs are correct.
Thank you very much!
Fred

Receiver File Adapter with File content Conversion

I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
The structure of the 2 files also different.

Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

Scheduling Receiver File Adapter

Hi All,
I would like to know if "Planning Availability Times" works for receiver file adapter (communication channel).
My scenario is IDoc to file. The IDoc from SAP end might be sent to XI at anytime but XI has to create the target file at a specific time on a day (say 9 pm). I'm just wondering if I can use "Planning Availability Times" to schedule the receiver cc.
Thanks in advance.
Regards,
Joe.

Hi,
Reffer these
Polling based upon availability
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
Regards
Seshagiri

How to create an Excel file from XML in the Receiver File Adapter Comm Ch

How do I create an Excel file from XML in the Receiver File Adapter Communication Channel? I have my mapping done and I am outputting the file as a comma delimited csv file. However, the target can only process an Excel file (.xls). How can I generate an Excel in XI?
I saw this blog, but I don't know how to create a XSLT transformation.
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
Any help would be appreciated. Thanks.

Here are the steps I took to create an XSLT transformation in XI 3.0:
1. I created my source and target XSDs using XMLSpy.
2. I created the XSLT mapping from source to target in XMLSpy (referencing the souce XSD schema).
3. I created another XSLT mapping to format the target into Excel XML.
4. Import the source and target XSDs in the IR's External Definitions
5. Zip each XSLT mapping (.xls) and import it into the IR's Imported Archives
6. Reference the XSL mappings in the Interface Mapping

Conversion of XML tags in receiver file adapter

Hi All,
I am sending one xml file to receiver file adapter.
But in case of receiver side I need to change the tags in XML structure,
eg:
if source aml file has tag <NAME> then in receiver case I need to convert it to <FNAME>.
How will I achieve it?

Hi
I also have the similar query
The output message we get from XI has following format
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:name xmlns:ns1="urn:xiworkshop:changetag">
</ns1:name>
I want an xml with following format
<?xml version="1.0" encoding="UTF-8" ?>
<name>
</name>
I need to write the file with with this structure and format using file adapter.
Can I do so in File adapter or mapping is required for the same?
Any suggestion would be highly appreciated(with points obviously )
Regards
Vanita thareja

Configuring Receiver File Adapter for J2SE

Hi All,
I have a scenario in which i need to convert the IDOC data into a fixed length file.
I did mapping according to the output structure of the file.
My Output file format is as follows...
Document1 document2 document3 etc
Each document contains different fields with different lengths
In XI-FIle adapter we give Recordset structure : Document1,Document2,Document3.
But while configuring Receiver File adapter in J2SE.
There is no option mentioned in J2SE Adapter.
http://saphelp.border-states.com/EN/95/bb623c6369f454e10000000a114084/content.htm
Please throw some light on the same.
Thank You
Regards,
Reehan

as far as i read the document, what i understood is that the J2SE adapter has a limitation.
your XML structure should be as mention in the link;
To convert a table in XML format to pure text format, the document format must be the same as that which is generated by the sender file/FTP adapter in mode FILE2XMBWITHROWCONVERSION (with the default value <row> for the structure) and the sender JDBC adapter. This means that the document structure looks like this:
<resultset>
<row>
<column-name1>column-value</column-name1>
<column-name2>column-value</column-name2>
<column-name3>column-value</column-name3>
</row>
<row>
<column-name1>column-value</column-name1>
<column-name2>column-value</column-name2>
<column-name3>column-value</column-name3>
</row>
</resultset>
This is an example for 3 columns and 2 lines. The number of lines and columns is, of course, unlimited. The XML elements in italics can be defined by the user and the elements of a line must be grouped within an element of type <row> </row>.
So cannot take the recordset structure as we have for the normal File adapter.

XML Format not poper For receiver File Adapter

Similar Messages

Maybe you are looking for