Xml import from mutlitple xml files

Is it possible to import different xml files for different locations within the same InDesign document?
For example a single page has two text boxes. Text Box 1 needs to import data from File1.xml, Text Box 2 needs to import data from File2.xml, etc. Is this possible or will File1.xml and File2.xml need to be merged into one xml file?

TurtleCruiser,
One of the problems I have had is that I want the data to update through linking, but I've only managed to get one text box to update while the data in the other box disappeared. Since posting I have managed to achieve the desired result using InDesign Tagged Text. Ideally, I would like to use xml so I will see if I can achieve the same result with your method.
Many thanks for your reply.

Similar Messages

How to find out what was imported from a dump file

Hi.
I got the dump file from a group and they told me to import it. Import job went successfully without errors as following:
Import: Release 9.2.0.6.0 - Production on Mon Oct 16 20:53:12 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by OPS$ORACLETS, not by you
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing OPS$ORACLETS's objects into SYS
. importing BDS_APP's objects into BDS_APP
Import terminated successfully without warnings.
How do i find out what was imported from a dump file?

another way would be to just list the contents of the dump file
imp user/pass file=dumpfile show=Y

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

Premiere Pro CC crashes upon XML import from Final Cut 7 Export

Hello all,
I have recently tried to import a FCP7 XML into Premiere Pro CC 2014, and a few seconds after initiating the export Premiere Pro crashes. Any solution to this???
I Exported on a Mac Tower running FCP7 and then imported the XML on a PC Running the latest Premiere CC v8.1. Could that be a problem in itself?
Also I'm considering a workaround where I move the FCP7 to FCPX, generate the XML then try importing again. Worth a shot?
Also trying this strictly on an Apple computer to import and save before moving to my main PC station. Thoughts?
The sequence I'm trying to import is fairly massive too, not sure if this is why, but it is mult-layered, both in audio and video and is running about an hour in length with several other blocks of video files after that, probably running up to 2 hrs. This should not be a problem, right?
Help! It would be greatly appreciated to get out of the clutches of final cut finally.

I am having the same issue.
Your best bet is to logon to Adobe website and go to customer support. If you chat with someone they can go on your computer and trash all your preferences. Your computer will be stable again. It worked great for me, but I just imported an XML from Resolve and it is crashing the system again.
Good luck.

XML import is duplicating xml elements

I have a document which I am importing XML into to create a menu. The xml is in this format.
<Root>
<Categories>
    <Category>
      <CategoryName>Black teas from around the world</CategoryName>
      <Tea>
        <TeaNumber>1</TeaNumber>
        <TeaName>Makaibari Estate Organic 1st Flush</TeaName>
        <TeaPrice>$5.50</TeaPrice>
        <Icons>
          <Organic href="file://TeanyOrganic16x16.png"/>
          <Bestseller href="file://TeanyBestSeller16x16.png"/>
          <Recommended href="file://blank.png"/>
        </Icons>
        <TeaDescription>From the oldest estate in the Darjeeling district and the first to practice Fair Trade this first flush is harvested in early spring with a slightly lighter color it is mildly flowery and finishes with notes of Muscat grape.</TeaDescription>
      </Tea>
</Tea>
</Category>
</Categories>
</Root>
There are several categories in the full file and each has a variable number of Tea elements. When I import this into my document it flows nicely into the document except that it duplicates some Tea elements. For example, the first category has 23 Tea elements in the xml file. The second category has only 3 in the xml file. When I import that into InDesign the first category has its 23 elements correctly, but second category has the 3 from the xml file plus 20 other elements which are duplicates of my original reference(the one I used to build the document prior to importing the xml file) Tea item. In fact, every category has been padded with extra duplicates of that same reference Tea element such that each category has 23 Tea elements regardless of what the actual XML file has.
Anyone know why it is duplicating those elements?

Reposting.
I have a document which I am importing XML into to create a menu. The xml is in this format.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Root>
    <Categories>
        <Category>
            <CategoryName>Black teas from around the world</CategoryName>
            <Tea>
                <TeaNumber>1</TeaNumber>
                <TeaName>Makaibari Estate Organic 1st Flush</TeaName>
                <TeaPrice>$5.50</TeaPrice>
                <Icons>
                    <Organic href="file:///C:/Users/Michael/Documents/Caraway%20Tea%20Company/information/business%20coorespondence/Teany/TeanyOrganic16x16.png"></Organic>
                    <Bestseller href="file:///C:/Users/Michael/Documents/Caraway%20Tea%20Company/information/business%20coorespondence/Teany/TeanyBestSeller16x16.png"></Bestseller>
                    <Recommended href="file:///C:/Users/Michael/Documents/Caraway%20Tea%20Company/information/business%20coorespondence/Teany/blank.png"></Recommended>
                </Icons>
                <TeaDescription>From the oldest estate in the Darjeeling district and the first to practice Fair Trade this first flush is harvested in early spring with a slightly lighter color it is mildly flowery and finishes with notes of Muscat grape.</TeaDescription>
            </Tea>
        </Category>
    </Categories>
</Root>
There are several categories in the full file and each has a variable number of Tea elements. When I import this into my document it flows nicely into the document except that it duplicates some Tea elements. For example, the first category has 23 Tea elements in the xml file. The second category has only 3 in the xml file. When I import that into InDesign the first category has its 23 elements correctly, but second category has the 3 from the xml file plus 20 other elements which are duplicates of my original reference(the one I used to build the document prior to importing the xml file) Tea item. In fact, every category has been padded with extra duplicates of that same reference Tea element such that each category has 23 Tea elements regardless of what the actual XML file has.
Anyone know why it is duplicating those elements?

Read xml-structure from a xml-document stored in a xmltype-column?

Hello,
I have several xml-documents stored in a table with a xmltype-column.
Is it possible to read the structure of one xml-document? I need to know what data are exists in the xml-documents.
I had read some hours here, but I dont find a suitable solution for that.
To make a example, what I need:
I have stored the following xml-document in the table:
<?xml version = '1.0'?>
<ROWSET>
<ROW num="6">
<EMPLOYEE_ID>105</EMPLOYEE_ID>
<FIRST_NAME>David</FIRST_NAME>
<LAST_NAME>Austin</LAST_NAME>
<EMAIL>DAUSTIN</EMAIL>
<PHONE_NUMBER>590.423.4569</PHONE_NUMBER>
<HIRE_DATE>6/25/1997 0:0:0</HIRE_DATE>
<JOB_ID>IT_PROG</JOB_ID>
<SALARY>4800</SALARY>
<MANAGER_ID>103</MANAGER_ID>
<DEPARTMENT_ID>60</DEPARTMENT_ID>
</ROW>
</ROWSET>
I need to return the following:
ROWSET
...ROW
......EMPLOYEE NUMBER
......FIRST_NAME VARCHAR2
......DEPARTMENT_ID NUMBER
Regards,
Mark

Hi,
I was on a wrong way. The datatype is not stored in xml, this was a mistake from me.
I needed something to printout some values from a xml-file. This xml-file was generated bei MS Excel. The data are in /Workbook/Worksheet/Table/Cell and I didnt know how to access it.
I write for that the following:
DECLARE
v_xml XMLType;
v_doc dbms_xmldom.DOMDocument;
v_node dbms_xmldom.DOMNode;
type t_values is table of varchar2(2000) index by binary_integer;
v_values t_values;
type t_table is table of t_values index by binary_integer;
v_table t_table;
procedure node_output (v_node in out dbms_xmldom.DOMNode)
is
v_nodelist1 DBMS_XMLDOM.DOMNodeList;
v_nodelist2 DBMS_XMLDOM.DOMNodeList;
v_anzahlnodes number;
v_anzahlrows number;
v_node_c dbms_xmldom.DOMNode;
v_xmlmitarbeiterid number;
begin
v_nodelist1 := dbms_xmldom.GETCHILDNODES(v_node);
v_anzahlrows := DBMS_XMLDOM.GETLENGTH(v_nodelist1);
if v_anzahlrows = 0 or DBMS_XMLDOM.GETNODENAME(v_node) = 'Table'
then
if v_anzahlrows > 0
then
for i1 in 0..v_anzahlrows - 1
loop
v_node := dbms_xmldom.Item(v_nodelist1,i1);
v_nodelist2 := dbms_xmldom.GETCHILDNODES(v_node);
v_anzahlnodes := DBMS_XMLDOM.GETLENGTH(v_nodelist2);
for i2 in 0..v_anzahlnodes - 1
loop
v_node := dbms_xmldom.Item(v_nodelist2,i2);
v_node_c := dbms_xmldom.GETFIRSTCHILD(v_node);
v_node_c := dbms_xmldom.GETFIRSTCHILD(v_node_c);
v_values(i2) := DBMS_XMLDOM.GETNODEVALUE(v_node_c);
end loop;
v_table(i1) := v_values;
end loop;
for i1 in 1..v_anzahlrows - 1
loop
select SEQ_XMLMITARBEITER.nextval into v_xmlmitarbeiterid from dual;
for i2 in 1..v_table(i1).count - 1
loop
dbms_output.put_line(v_table(i1)(i2));
end loop;
end loop;
end if;
else
v_node := dbms_xmldom.GETFIRSTCHILD(v_node);
for i in 0..v_anzahlrows - 1
loop
v_node := dbms_xmldom.Item(v_nodelist1,i);
node_output(v_node);
end loop;
end if;
end;
BEGIN
select inhalt into v_xml FROM xmlimport WHERE name = 'F23973/mitarbeiter.xml';
v_doc := dbms_xmldom.newDOMDocument(v_xml);
v_node:= dbms_xmldom.makeNode(dbms_xmldom.getDocumentElement(v_doc));
node_output(v_node);
END;
This gives me all data from a xml-Excel-file. Is there a better way to do that? I have Oracle 10.2.
Regards,
Mark

How to extract a set of XML elements from an XML element

My XML, stored in a variable called v_XML_input, is as follows:
<Root>
<PackageName>MY_PKG</PackageName>
<ProcedureName>SAVE_ADJ_VALUES</ProcedureName>
    <Parameters>
      <Parameter>
          <Name>p_xml_string</Name>
          <Value><DocumentElement>
                   <tblAdjustments>
                     <EmpID>41439</EmpID>
                     <UserNTID>APPUSER</UserNTID>
                     <Comment>TEST RECORD</Comment>
                     <Amount>2000</Amount>
                     <RecordType>R</RecordType>
                   </tblAdjustments>
                  </DocumentElement>
          </Value>
      </Parameter>
    </Parameters>
</Root>I want to extract only whatever is between <Value> and </Value>. In this case just this:
                <DocumentElement>
                   <tblAdjustments>
                     <EmpID>41439</EmpID>
                     <UserNTID>APPUSER</UserNTID>
                     <Comment>TEST RECORD</Comment>
                     <Amount>2000</Amount>
                     <RecordType>R</RecordType>
                   </tblAdjustments>
                  </DocumentElement>The actual values between the <Value> and </Value> may not always be these same elements; they may be strings, numerical values, or other XML values.
I've tried the following in a LOOP, and it works for other strings and numerical values, but I get a ORA-30625: method dispatch on NULL SELF argument is disallowed when trying to extract an XML value as a string.
v_sql_str := v_XML_input .extract('//Parameters/Parameter[position() = '||i||']/Value/text()') .getstringVal()||'''';Any help is appreciated...TIA!

Not sure what you are actually trying to accomplish.
What's wrong with
SQL> SELECT xmlserialize(content XMLTYPE
          ('<Root>
<PackageName>MY_PKG</PackageName>
<ProcedureName>SAVE_ADJ_VALUES</ProcedureName>
    <Parameters>
      <Parameter>
          <Name>p_xml_string</Name>
          <Value><DocumentElement>
                   <tblAdjustments>
                     <EmpID>41439</EmpID>
                     <UserNTID>APPUSER</UserNTID>
                     <Comment>TEST RECORD</Comment>
                     <Amount>2000</Amount>
                     <RecordType>R</RecordType>
                   </tblAdjustments>
                  </DocumentElement>
          </Value>
      </Parameter>
    </Parameters>
</Root>'
          ).extract('//Value/*') indent)xml
FROM DUAL
XML
<DocumentElement>
<tblAdjustments>
    <EmpID>41439</EmpID>
    <UserNTID>APPUSER</UserNTID>
    <Comment>TEST RECORD</Comment>
    <Amount>2000</Amount>
    <RecordType>R</RecordType>
</tblAdjustments>
</DocumentElement> ?
Note: xmlserialize is not necessary and is there just for pretty printing the result.

Creating an XML instance from an XML Schema

Hello,
Does anyone know how to create a skeleton XML instance from the mandatory fields taken from an XML Schema?
There might be a way with XSLT, however I cannot find the relevant tutorials for this issue.
Can you please help me out?
Thanks.

Of course I meant how to achieve this "on the fly" using XSLT and Java.

Using REGEXP_REPLACE to remove XML data from between XML tags

Hello there,
I am trying to use the REGEXP_REPLACE SQL function on a piece of XML, to remove the actual XML data from the elements. My end goal is to end up with a comma-delimited list of XML element names. As part of the first step, I just want to rip out all the actual data.
I tested the following query, and it initially appeared to work:
SELECT REGEXP_REPLACE('>THIS IS A TEST<',
                      '>([[:alnum:]]\s|\S)*<',
                      '><' ) AS test_result
FROM dual;Unfortunately, when I applied this to a full XML string, it didn't work. Here is the test query I used:
SELECT REGEXP_REPLACE('<ROW><TEST_ELEMENT1>123</TEST_ELEMENT1><TEST_ELEMENT2>THIS IS A TEST!</TEST_ELEMENT2></ROW>',
                      '>([[:alnum:]]\s|\S)*<',
                      '><') AS test_result
FROM dual;I ended up with the following output:
*<ROW></ROW>*
What I was trying for was:
*<ROW><TEST_ELEMENT1></TEST_ELEMENT1><TEST_ELEMENT2></TEST_ELEMENT2></ROW>*
If you're reading this and you're a Posix RegExp Guru, please could you let me know exactly where I'm going wrong? RegExps are not my strong point, but I'd like to get better at them.

jmcnaug2 wrote:
Just out of interest, how would you go about writing the XQuery function so that it returns the actual XML Element values in comma-delimited form (This is Oracle Canonical XML, so has a very basic layout)? ;)Do you mean like this ?
SQL> SELECT xmlquery(
2    'for $i in $d/ROWSET/ROW
3     return string-join($i/*, ",")'
4    passing dbms_xmlgen.getXMLType('SELECT employee_id, last_name, first_name FROM employees WHERE rownum < 10') as "d"
5    returning content
6 ).getClobVal() as csv
7 FROM dual;
CSV
100,King,Steven
101,Kochhar,Neena
102,De Haan,Lex
103,Hunold,Alexander
104,Ernst,Bruce
105,Austin,David
106,Pataballa,Valli
107,Lorentz,Diana
108,Greenberg,Nancy
SQL>

Import from .dmp.Z file

Hi Gurus...
I have one dmp file but its in compressed format that is xyz.dmp.Z
Now I have to run the import from this file. I wanted to know can I run the import directly from .dmp.Z file or do I need to de-compress it first ? As its a big file (size of around 20 GB), so it will take loads of space when de-compressed.
Thanks...
Sidhu

This is the script that I have written
export ORACLE_SID=CONRCC
export ORACLE_HOME=/home/oracle/product/10.1.0/db_1
mknod /tmp/imp_pipe p
uncompress /home/USB/backups/exp_MDRRCC_20070511_125155.dmp.Z >/tmp/imp_pipe &
imp file=/tmp/imp_pipe show=y full=y log=/home/oracle/MDRRCC/MDRRCC_import.logit seems that first its de-compressing the file as it has made a file with the same name (of size 37 GB as of now & in ps -ef its showing uncompress as running). so is it going to uncompress the file first ? if yes then whats the advantage of using pipe ? its as good as de-compressing the file first and then running the import.
any points
Sidhu

PL/SQL Package importing from Flat Data files

Looking for sample PL/SQL package in importing data from flat data files into Oracle. Possible using the UTL_FILE.FOPEN and UTL_FILE.GET_LINE functions ?

SQL Loader is tailor-made for importing data from flat-files.
There's way less code to write and it is usually faster than coded approach so this may be better solution for you, depending on details of your situation.
See docs: http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a76955/ch03.htm#2436

Trying to import from different csv files into multiple JTables

This might seem like something that isn't commonly done, but I'll see if anyone has done this before anyways.
I currently have a JTable (tab #1) and it successfully reads in the data from a CSV file to populate the cells. Now, I am looking into making 3 more JTables. I can tab between the four different tables, but I can't seem to figure out how to get the data to go to the correct JTable. Tab #1 = table, Tab #2 = table2, Tab #3 = table3, Tab #4 = table4.
Thanks.
        try
            FileInputStream fileInput = new FileInputStream ("upcoming.csv");
            BufferedReader InputCSV = new BufferedReader (new InputStreamReader (fileInput));
            line = InputCSV.readLine(); //start reading into the records.
                //Create data for the table.
                //the row variable = starting row
            int row = 0;
            while(line != null)
                tmp = line.split(",");
                for (int col = 0; col < columnNames.length; ++col)
                    data[row][col] = tmp[col]; //store cells' data to the 2-dimensional array.
                row++;
                line = InputCSV.readLine();
            }//end of WHILE-statement.
        } //END of TRY-statement.
        catch(Exception e)
            System.out.println(e);
        }

I have been successful in my quest to get 4 different datasets into 4 different JTables. The previous posters suggestion to use the Table model led me to this page:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/table/TableModel.html
        TableModel myData = new MyTableModel();
        JTable table = new JTable(myData);I had some very similar code in my program. I use the DefaultTableModel and the SortFilterModel before having 4 different JTables.
        DefaultTableModel model = new DefaultTableModel(data, columnNames);
        DefaultTableModel model2 = new DefaultTableModel(data2, columnNames);
        DefaultTableModel model3 = new DefaultTableModel(data3, columnNames);
        DefaultTableModel model4 = new DefaultTableModel(data4, columnNames);I use the code in the first post 4 times, and only change the filename and the data#.
I also have some code that counts the number of lines that will be needed.
Thanks.

Search whole table (imported from an excel file) for those matching substring (this is an input from user) in project siena

Im trying to search my entire table (data is imported using an excel file - containing 2 cols, description and image url) for those that match the substring entered by the user into an inputText within project siena. I have 2 screens within the project,
the first screen shows all the data in a gallery, the second screen will allow the user to search for those that match the word he/she has enter. The entered word is only a sub string, and I want to search all rows which match that sub string.. Help would
be appreciated as im a newbie to making windows apps!!

Lest say you have 'Gallery1' in screen1 and 'Gallery2' in screen2. your Excel input table is called 'table1' and your input text box is called 'inputText1'.
If you have bound 'table1' to your 'Gallery1', then you can accomplish what you are trying to do by using this rule on Items property of Gallery2: "Filter(Gallery1!AllItems, InputText1!Text in Description)"
The above formula will filter out rows that have description containing the input text.

XML imported from iM '08 has a different aspect ratio in FCP 6?

I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I get a display issue with black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the? and for the life of me, I've re imported using 16:9, no difference...I have no idea what's going on.
Any help would be greatly appreciated!

Found the answer, and pretty simple too....yeesh. just click on your clip and go to setting>conform to sequence.

Xml import from FCP encounters an error

HELP!!!!!
I've imported an xml from FCP, but keep getting the following message:
Premiere Pro has encountered an error.
[..\..\Src\Sequence\TrackItem.cpp-596]
I am unable to work on this project as this message pops up when ever I do anything, even a simple click on the app gives this error

Okay, after trying both steps in the document above, the missing codecs/preview presets still aren't available when I go to File>New>Sequence. I guess that's the only way to check if they have installed correctly/activated correctly right? It says it's correctly activated though so not sure why it's doing this.
Are these presets also missing in the trial verison of the software?

Xml import from mutlitple xml files

Similar Messages

Maybe you are looking for