XML message error "No inbound interface found "

Hi,
I have inbound file adapter and mine is standalone XI box,
and idoc outbound adapter, when i start the file adapter im getting the folloing error message in SXMB_MONI .
Error when determining inbound interface. No inbound interface found for sender XI1 and outbound interface FILE2IDOC.FILEINBOUND
pls help me.
thankx

The message is telling you the exact problem - you do not have a receiver identification configured in the Integration Directory for this combination of inbound interface, namespace, and business system. Make sure your file adapter is configured to send with the correct outbound interface/interface namespace.
HTH,
Paul Medaille

Similar Messages

PI trouble shooting: Error in inbound interface

morning,
I got a alert: "Error in inbound interface: POS transaction 1008 26.09.2009 1-35 Z102 0 transferred twice", but I don't know what it means.
I checked xml message and queue in PIP, but I didn't find anything about that.
Please help me,thanks.

Hi,
You mean sxmb_moni in PIP? but I don't know what pos transaction is.
Well, the alert must have generated almost the same time when the transaction was run for the 2nd time, so check 26.09.2009 entries in SXMB_MONI. But if there are lots of entries, it will be difficult.
Try to get in touch with the functional team responsible for this and ask them to troubleshoot at their end.
Also, check at the RWB -
I inputed "RWB" tcode in PIP, but "Transaction RWB does not exist"
RWB is not a transaction code. Go to your web browser for Integration Builder (from where you open ESR / ID), you will have a link to Runtime Work Bench from there.
regards,
Neetesh

XML-22009: (Error) Attribute 'select' not found in 'xsl:value-of'

Hello,
I'm a long-time Siebel developer but novice to BIP, trying to enhance some complex rtf templates that an experienced xdo/bip developer (contractor) designed for us in the past, with a couple of new fields that have been added to the integration object.
All templates and sub-templates receive 'no errors found' when using add-in tool selection of 'Validate Template'. Unfortunately we cannot utilize the 'preview' capability due to the way the sub-templates are called, so only way to test is to upload into server and attempt to run real-time.
This results in UI error of SBL-OMS-00203, which when we dig into the xdo log file turns out to be:
<Line 648, Column 88>: XML-22009: (Error) Attribute 'select' not found in 'xsl:value-of'.
I have exported all templates and sub-templates into XSL-FO Style Sheet and looked at line 648 column 88, and none of them seem to correspond to this line/column combination (in fact most exports do not even go that high in lines).
Googling 'XML-22009' hasn't proven to be of much help, so reaching out to the xdo experts in this forum.
How are the line/column #'s determined in the xdo log output?
I am pretty sure that it must be some issue with my 'Main' template, since none of the sub-templates have been changed (and the current version of the report, without the new fields incorporated, still runs fine from the UI). In the XSL-FO format export of the (modified, with new fields added) 'Main.rtf' file, line 648 places it right in the midst of a bunch of hex which corresponds to an imbedded image (which was also part of the existing template, no change there) and that line only has 65 columns (i.e. doesn't even go up to 88), so I'm questioning how valid the Line/Column information is in the xdo log error message.
Any hints on troubleshooting this one would be greatly appreciated!
Thanks & Regards,
Katrina

Hi,
as I wrote in the inital message, we even left out the output method or used "application/pdf". The result is unfortunately always the same. And I still claim this is not a problem with the stylesheet itself, it has to do something with the mobile's environment.
Something I didn't tell: we have 2 servlets in our application, 1 responsible for output in html and 1 in pdf. The .fo stylesheet passed to the 'html servlet' is parsed correctly (and shows the source code, because it does not know about fo and conversion to pdf), the .xsl stylesheet passed to the 'pdf servlet' raises same exception/same line. You might tell us that there is a problem with the 'pdf servlet', but once again: why in online it is working?
Greetings and thanx very much for your precious time!

Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

How to split big xml-messages with file inbound adapter

Hello,
we have big xml-messages in our filesystem, which are processed by XI 3.0 (SP11). We are using the file inbound adapter. Now we want to split these big xml-message into some smaller messages.
Exist there a corresponding function to the "xml.recordsetsPerMessage" which is working with xml-files?
Thanks!
Regards
Stefan

Hi,
maybe you can split the message in the BPM
with 1:N mapping?
Process Integration (PI) & SOA Middleware
I don't think anythink like "recordsetsPerMessage" is possible for xml messages
Regards,
michal

Possible to change the xml output of the Inbound Interface?

Hi All,
I hav a scenarion where a third party system receives the XML from XI. the output of the xml from XI looks as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
- <ns1:WMSItalyItemReplication xmlns:ns1="http://cpe.com/cpe_ftp_wms/ItemReplication">
- <item_dl dt_tm_created="2006-06-29 09:02:23">
- <item action="" owner_id="CIB" itm_num="3143832ZZ99">
<itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a />
<itm_udef_b />
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d />
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
</ns1:WMSItalyItemReplication>
</ns0:Message1>
</ns0:Messages>
And the output that the third party expects is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE item_dl SYSTEM "http://localhost/dtd/item_dl.dtd">
<item_dl><item><itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a></itm_udef_a>
<itm_udef_b></itm_udef_b>
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d></itm_udef_d>
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
Observe the first two lines of the second output.
I tried to generate the second xml using a java mapping. and it is working fine when i test it in the Interface mapping's test tab. but it is not working when i test the scenario end to end. It is giving some runtime error.
is it possible to change the namespace, etc in the output of the XML coming out of XI? if v change those namespace stuff, does XI recongnise the message and send it to the appropriate reciever?
Please suggest me any solution.
any help wud b greatly appreciated.

The first XML is a Split msg XML..Where there are multiple messages within a single XML document..Thats why u have a <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Tags..
Recheck what ur target system needs are & change ur mapping in XI.

Application ERROR - Fault message Error in Inbound ABAP Proxy !!

Hi Folks,
I have got application error while doing in Inbound proxy scenario. This inbound message is ProductActivityNotification, this message has got fault message. This message is triggering for faults. How to control this fault message or how to divert this error as an alert to RWB. Please give me your ideas step by step. Error as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SAPGlobal20/Global">ProductActivityNotificationFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please find the fault message has got following values
<?xml version="1.0" encoding="utf-8" ?>
- <n0:ProductActivityNotificationFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global" xmlns:prx="urn:sap.com:proxy:RAS:/1SAI/TAS653D9A9CCD9A8EF3AF9B:701:2009/02/10">
- <standard>
<faultText>Proxy Class (Generated)</faultText>
- <faultDetail>
<severity>information</severity>
<text>Start of inbound processing: ProductActivityNotification (ID )</text>
<id>000(/SCA/BIF_PROACT)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>Message ID is missing</text>
<id>032(/SCA/BIF_MI)</id>
</faultDetail>
</standard>
</n0:ProductActivityNotificationFault>
Will you please focus bit light on this error message please?
Regards
San

Hi,
Check your Source data is correct or not..beofr executing your scenario execute your inboud Proxy with valid data ,
check below blog...
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Regards,
Raj

How to handle xml message in proxy inbound processing?

Hi Experts,
I have a scenario that is SOAP Client====>XI===>ECC.
But i don't need to use the XI mapping,i skip mapping
in XI and use the generated proxy inbound processing.
Here is a message structure as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■■■<productId>aaaa</productId>
■■■<name>bbb</name>
■■</ChargeInfoList>
■</commodity>
</commodityList>
When i sent the message without field entry of <productId>
and <name> i got the response in soap client as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■</commodity>
</commodityList>
The field tag <ChargeInfoList> doesn't display.
But i want it to display as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■</commodity>
</commodityList>
In case of field entry is empty,how to let the response
contains tag?
As i know ,there is a CONTROLLER in proxy .
But i don't know if it is relevant to this
case and i don't know how to handle it.
Brand

Hi Mrudula,
As far as i know there are no content conversion methodology for HTTPS as the recevier adapter.
Also you can read through these links to confirm the same:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst30.htm
SAP NetWeaver - XML Communication Interface (CA-XML) [original link is broken]
Regards,
abhy
note: reward the helpful.

While processing a message : Error HTTP 404: not found

Hi gurus,
I'm stuck on a File-XI-IDoc scenario.
Here is the message i get in the Message Tool Display:
Erreur lors de la transmission du message au point d'accès http://rchase12:53000/sap/xi/engine?type=entry via la connexion File_http://sap.com/xi/XI/System. Motif : com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
It's in French but it it's like my url is not good. I read about the port that must be 80xx in place of 53000 is it true?? I can't find any information about it, in another place than some forum topics.
Could anyone help me?
Thanks in advance.
Thomas

Hi,
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards,
Shabari

BPM sending messages to wrong inbound interfaces in PI and target system

Hi All,
i am doing File to proxy scenarion using bpm.i am receiving three files,two files splitting on based condition(location code) in receiver determination and sending to bpm(here one bpm receiving 3 files then it merges 3 files into one proact and some promo messages based promos in source file ,same in the second bpm with 2 files with different mapping,here target system is SAP APO SNC).i am doing testing now mapping and every thing is working fine.but first bpm sending messages(proact and promo messages) target sytem side (proact_in and promo_in)inbound inrefaces.if i am executing scenario both bpm sending (proact and promo) messaegs in target system its showing wrong bpm name.in target system also we can check messgaes sxmb_moni.
ex:if first bpm A sending 1 proact and 2 promos,and second bpm B sending 1 proact and 2 promos to target system,but in target syetm its showing sender component as 1st bpm A for 3 promo messages(here B bpm messages sending with A bpm viceversa i did the configuration correctly) and for 1 its showing second bpm. please give me suggetions how to resolve this issue.
Thanks,
seshagiri.

Is the connection to SNC via idocs or proxies. If it's via idocs can you check the control record and see if the issue is not there ?

Error when determining the inbound interface

Hi Experts,
I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
Runtime error
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
Scenario Steps
1) No Condition in Interface Determination
2) 0..unbounded in Message Mapping and Operational Mapping.
3) E1KNA1 is mapped to E1KNA1
4) E1ADRMAS is mapped to E1ADRMAS
5) One Message Mapping and 1 Operational Mapping.
Thanks in Advance.
Sriram.

Hello,
I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
Since your scenario makes sure that the 2 files are created, there is no need to use multi-mapping. Rather, you can use an interface determination split. To do this:
1. declare xml_file1 as service interface 1, xml_file2 as service interface 2
2. do not change target occurrence in message mapping and operation mapping, maintain it as 1..1
( 2 operation mappings)
3. in ID, add the two service interfaces in your interface determination
At runtime, it will split into two inbound interfaces.
When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
Runtime error
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
Were you able to declare the 2 xml_files as two separate service interface(different names) in your operation mapping?
Hope this helps,
Mark

XML messages Filter in RBW

Hello
In XI 30, look like very small question about RWB container variables filter...
Simple how to Filter XML error messages in RWB (Alert configure), I couldn't find that answer anywhere... is anyone has idea
We are receiving XML messages in E mail and (To Interface: continair variable) shows value "Acknowledgement" thease messages we don't need to display, so how to Filter it in RWB or some other palce....
Please Advised, at lest little advise
Thanks a lot

Hi,
Sure, I can exaplin this clearly!
Question #1
In (Exchange Infrastructure 3.0 SP20), setup XML messages (Error) and all error messages goes E mail + blackbarry, We receiving of 90% messages for "Acknowledgment" and display result (To Interface: Acknowledgment) so we would like to Filter it thease messages
Question #2
I am another question related same issue
In SXMB_MONI shows list of XML error messages: and its also display under SOAP Header (Error)
<SAP:Stack>No receiver could be determined</SAP:Stack>
I would like to display above line in E mail, but I couldn't found any continair variable or may be it has some other procedure
I am sending Screenshot to see clear view...
http://www.flickr.com/photos/25222280@N03/2701501246/sizes/o/
Thanks for your time... and really appriciated it for fast response
J

No show message in monitor for processed XML messages

Hi,
I get the document 'VALIDANTING A CONNECTION BETWEEN SAP R/3 AND SAP XI WITH RFC' and following the steps until step 9 it's ok but I can execute the step 10 I get 2 problem:
First Problem - I dont know where see the ABAP code STFC_CONNECTION, How do you know?
The Second Problem is the step 11 the system not show message and the documentation show message.
Please Help-me.
Any Ideas ?
Regards.
Mattos.

Hi, Ashish thanks for anwser my doubt.
So, the step 10 is "10. Refer to the following ABAP code snippet for executing the STFC_CONNECTION programmatically
instead of using the user interface shown above.
Call STFC_CONNECTION to send/receive request/response to/from XI***
DATA: v_msg_text(80) TYPE C. "Message text
CLEAR v_msg_text.
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION 'XI'
EXPORTING
requtext = 'REQUEST_TEXT'
EXCEPTIONS
communication_failure = 1 MESSAGE v_msg_text
system_failure = 2 MESSAGE v_msg_text.
IF SY-SUBRC NE 0.
**Write your code here**
ELSE.
**Write your code here**
ENDIF."
and the setep eleven is "11. Check the Integration Engine monitor for the processed XML messages (SXMB_MONI):
Shows Sender Interface:"
But I not see messege in my Monitor.
Other doubt in step 5 the document order to create the RFC_Sender Communication Channel, this configuration have the parameters PROGRAM ID (mandatory), we dont have any idea what input there, Can you Help-me? How can find this parameters? in document we have the exemple INTEGRATION_SERVER.
Thanks.
Regards,
Mattos.

I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server

I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server Interface error. 'No component returned from CreateWidget'

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

SXMB_MONI : Error in Persistence Layer : XML Message Not Found

Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V Jayachandra

Hi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish

XML message error "No inbound interface found "

Similar Messages

Maybe you are looking for