XML Source Duplicate _id fields in output
I have a vendor supplied XML File. I try and load the file using the XML source in SSIS 2012. The file has a vendor supplied XSD file. When I look at the output I see 2 _id fields with the same name.
One appears to be an id in the file. the other appears to be generated by SSIS. I have tried to use the advanced editor to change the name but this causes errors.
True it appears to be different case; however a mapping error occurs at runtime
Hi Gene,
What error message did you encounter? Please post the related error message for further analysis.
Regards,
Mike Yin
TechNet Community Support
Similar Messages
-
Transforming XML source to (X)HTML StreamResult outputs long comment
Hi,
I'm using javax.xml.transform.* to transform XML data into an XHTML page. The XML data represents a document (contains information about headers, paragraphs, related pages, etc.) and an XSL file is used to properly transform that data into an XHTML compatible file. All transformations go just as they should, however, the XHTML output contains a very lenthy comment about elements and attributes concerning HTML. Obviously, I do not want this comment in my final output. As a side note: I'm using a StreamSource(File) for the XML data source, a StreamSource(File) for the XSL file and a StreamResult(HttpServletResponse.getOutputStream()) for the HTML output. I'm not sure wether the problem is with using a StreamResult directly (rather than a SAXResult), or because I'm outputting directly to the servlet output stream. All input and output is in UTF-8, and the HttpServletResponse has been configured using setCharacterEncoding("UTF-8") and setContentType("text/html").
Everything works fine, except I get this stinkin' long comment, which I want gone.
Thanks,
YuthuraI get the following result.html file (properly transformed and displayed in my browser, except for the comment):
<!--================== Imported Names ====================================-->
<!-- media type, as per [RFC2045] -->
<!-- comma-separated list of media types, as per [RFC2045] -->
<!-- a character encoding, as per [RFC2045] -->
<!-- a space separated list of character encodings, as per [RFC2045] -->
<!-- a language code, as per [RFC3066] -->
<!-- a single character, as per section 2.2 of [XML] -->
<!-- one or more digits -->
<!-- space-separated list of link types -->
<!-- single or comma-separated list of media descriptors -->
<!-- a Uniform Resource Identifier, see [RFC2396] -->
<!-- a space separated list of Uniform Resource Identifiers -->
<!-- date and time information. ISO date format -->
<!-- script expression -->
<!-- style sheet data -->
<!-- used for titles etc. -->
<!-- nn for pixels or nn% for percentage length -->
<!-- pixel, percentage, or relative -->
<!-- integer representing length in pixels -->
<!-- these are used for image maps -->
<!-- comma separated list of lengths -->
<!--=================== Generic Attributes ===============================-->
<!-- core attributes common to most elements
id document-wide unique id
class space separated list of classes
style associated style info
title advisory title/amplification
-->
<!-- internationalization attributes
lang language code (backwards compatible)
xml:lang language code (as per XML 1.0 spec)
dir direction for weak/neutral text
-->
<!-- attributes for common UI events
onclick a pointer button was clicked
ondblclick a pointer button was double clicked
onmousedown a pointer button was pressed down
onmouseup a pointer button was released
onmousemove a pointer was moved onto the element
onmouseout a pointer was moved away from the element
onkeypress a key was pressed and released
onkeydown a key was pressed down
onkeyup a key was released
-->
<!-- attributes for elements that can get the focus
accesskey accessibility key character
tabindex position in tabbing order
onfocus the element got the focus
onblur the element lost the focus
-->
<!--=================== Text Elements ====================================-->
<!-- these can occur at block or inline level -->
<!-- these can only occur at block level -->
<!-- %Inline; covers inline or "text-level" elements -->
<!--================== Block level elements ==============================-->
<!-- %Flow; mixes block and inline and is used for list items etc. -->
<!--================== Content models for exclusions =====================-->
<!-- a elements use %Inline; excluding a -->
<!-- pre uses %Inline excluding big, small, sup or sup -->
<!-- form uses %Block; excluding form -->
<!-- button uses %Flow; but excludes a, form and form controls -->
<!--================ Document Structure ==================================-->
<!-- the namespace URI designates the document profile -->
<!--================ Document Head =======================================-->
<!-- content model is %head.misc; combined with a single
title and an optional base element in any order -->
<!-- The title element is not considered part of the flow of text.
It should be displayed, for example as the page header or
window title. Exactly one title is required per document.
-->
<!-- document base URI -->
<!-- generic metainformation -->
<!--
Relationship values can be used in principle:
a) for document specific toolbars/menus when used
with the link element in document head e.g.
start, contents, previous, next, index, end, help
b) to link to a separate style sheet (rel="stylesheet")
c) to make a link to a script (rel="script")
d) by stylesheets to control how collections of
html nodes are rendered into printed documents
e) to make a link to a printable version of this document
e.g. a PostScript or PDF version (rel="alternate" media="print")
-->
<!-- style info, which may include CDATA sections -->
<!-- script statements, which may include CDATA sections -->
<!-- alternate content container for non script-based rendering -->
<!--=================== Document Body ====================================-->
<!-- generic language/style container -->
<!--=================== Paragraphs =======================================-->
<!--=================== Headings =========================================-->
<!--
There are six levels of headings from h1 (the most important)
to h6 (the least important).
--> ... (more to come) -
Hi all,
How to do the mapping since all source xml is in one field. I am on PI 71 ehp1.
Thanks JanosHow to do the mapping since all source xml is in one field. I am on PI 71 ehp1
Is your source structure something like:
<SRC>
<Filed1><Name>SAP</Name><Location>Germany</Location></Field>
</SRC>
i.e. an XML in one node and now you want to separate it into the relevant message structure in XI?
If yes then follow the De-serialization logic as mentioned by Udo in this thread:
Re: Changing XML message into a string
Regards,
Abhishek. -
Traversal field in XML Source of LiveCycle Designer files
Can someone explain to me how the Traversal field
in XML Source relates to the tab order for an entire PDF form? Like in my form i have the following, but both have 70 in them, but different names (field vs draw), but i dont know how that relates to the overall tab order of the entire PDF.
<traversal><
traverse ref="#field[70]"/></
traversal>
<traversal><
traverse ref="#draw[70]"/></
traversal>It tells where to tab to next - those are attached to a field and point to the next field to go to.
#field[70] and #draw[70] are field names in your form. I think those tags only show up if you start using custom tabbing order.
Something looks odd though - did you name your fields with "#" in front? I might be wrong but that may cause problems for some things (not tabbing per se) - someone else here can hopefully correct me or not. -
When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.The reason is in the first line of the error. It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column. You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
In order to fix the problem, you're going to need to increase the allocated space for that column. In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file. If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors". Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
Talk to me on -
Newbie...large form, repeated fields, separate output
Apologies in advance for being the newbie. I'm great with programming MS, not done any in Adobe, and I suspect the answer to this is going to be that it'll require scripting.
I have a need to process a large batch of mixed typed of paper:
forms filled in by hand, with address/other info
checks (images of checks)
forms that have been pre-printed with information
These will all be one large continuous set of pages (will start as a video file of these getting imaged, then someone will create snapshots of the points in the video where each page is laid under a camera, then the snapshots will be combined into one pdf, which represents all documents that got processed).
I then need someone to have the ability to do the following, as they go through the pages in Acrobat:
- depending on the type of image they see (hand form, check images, printed form), click a shortcut, which will create a predetermined set of form fields, in a predetermined place on the screen (effectively layered onto the image). These form fields will be set up to correlate to the type of image (a hand form will have X number of fields, which allow for address, checkboxes, etc....a check image will have Y number of fields which are address and amount...and so forth)
- they will then do one of the following:
have a dropdown, which is fed by some DB (don't know if it is supposed to reside in Adobe somewhere, or can be looking into an Excel/Access, or how this might be done). They will select from an ID number that the image they're processing needs to tie to (again, ID numbers are already determined in a system elsewhere...this exercise is tying form/check information to that ID number)
fill in the appropriate fields if it is check or handwritten form
have the fields for a pre-printed form (which means that the person's information is already in the system, and they printed the form up before submitting it in person) populate the fields in Adobe...so there are X number of fields...in our system we have the information to fill them...based on the lookup that happens in the dropdown, the values that would populate name/address/etc need to also come back and populate the set of fields in that page
use then just verifies what's on the screen matches the form, or edits as necessary
all fields then need to output into a structured Excel file (this part I've done with Adobe before, so I am aware of how to do this).
How much of the above is reasonably simple, for someone who knows scripting? Anything sound like it's simply not possible? I'm trying to gauge whether this idea has legs. Thanks.Thanks Jimmy, I read through a few other posts on the forum about vaguely related results and found the problem.
It seems that when i had copied and pasted a bound subform containing data and then changed the binding on the outer subform, the actual binding on the controls hadn't changed (despite seeming to have done so in designer). When i went into the XML source and manually changed these, the problem seems to have cleared up.
But thanks anyway :) -
Generate xml source file for Oracle Order Capture Print Quote
Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- <!-- Generated by Oracle Reports version 6.0.8.26.0
-->
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks RaviHi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger -
Un Expected end of XML Source...
Hi,
I am using Java Script in Html, while executing this program I am getting the Error "Un-Expected end of XML Source }\n" but i have closed all the brakets properly.
Please help me why this error riseing while executing the program.
<html>
<head>
<script>
function selectValue()
var selected_value=document.getElementById("mySelect");
document.getElementById("expression").value = mySelect.options[mySelect.selectedIndex].text;
document.getElementById("expression").value=m
function generator()
var theExpression = document.forms[0].expression.value;
var token=theExpression.split(' ');
var name=token[0].toUpperCase();
if(name="MULTIGEN")
multiGen(theExpression);
function multiGen(theExpression)
var tokenArray=theExpression.split(' ');
var quantity=parseInt(tokenArray[1]);
var output='';
for(var j =2;j < tokenArray.length; j++)
output=output+tokenArray[j];
for(var i = 1;i <= quantity; i++)
document.forms[0].theResults.value=output;<br>
</script>
</head>
<body>
<form name="theForm" id="theForm">
<table>
<tr>
<td>
Enter generator expression: <input type="text" name="expression" id="expression" maxlength="60" size="60">
<input type="button" name="generate" value="generate" onclick="javascript:generator()">
</td>
</tr>
<tr>
<td>
Results:
<input type="button" name="Select" value="Select" onclick="javascript:selectValue()">
</td>
</tr>
<tr>
<td>
<textarea name="theResults" rows="20" cols="60"/></textarea>
<select name="mySelect" size="20" id="mySelect">
<option>MultiGen Quantity String</option>
<option>MultiGen 900 Testers love TestersDesk.com</option>
<option>MultiGen 900 Testing</option>
<option>SyntaxStringGen Syntax Quantity</option>
<option>SimpleStringGen UCase 10 100</option>
<option>SimpleStringGen LCase 10 100</option>
<option>SimpleStringGen Num 10 100</option>
<option>SimpleStringGen AlphaNum 10 100</option>
<option>SyntaxStringGen AAA999ULN 800</option>
<option>SyntaxStringGen 999--LN 800</option>
<option>SyntaxStringGen AAA999ULN 800</option>
<option>SyntaxStringGen AXXX999ULN 800</option>
<option>SimpleStringGen Format Length Quantity</option>
<option>NumGen Type Minimum Maximum Quantity</option>
<option>NumGen Integers 30 3000 25</option>
<option>NumGen Real 30 3000 25</option>
<option>QTGen Length [symbol] [CharFirst/NumFirst]</option>
<option>QTGen 500</option>
<option>QTGen 500 # NumFirst</option>
<option>QTGen 500 X</option>
</select>
</td>
</tr>
</table>
</form>
</body>
</html>Thanks
Buntty
Edited by: Buntty on Dec 4, 2008 2:30 PMThis is not a Javascript forum. You've been told before not to post javascript questions. I'm locking.
-
Dynamic Sources for a field in Oracle Reports
Hi there,
I am sure someone might have encountered this problem.
I have six Queries in Data Model. Based on certain parameter value, I need to change the source field setting for each field in the report
output.
e.g in Report LayOut Model, I have a field F_1. The source for this field in
the Property pallette is COL1 which is coming from Query1.
I need to assign a new source based on parameter value for field F_1 to
COL2 from Query2 or COL3 from Query3 or COL4 from Query4, COL5 from Query5, COL6 from Query6 in the Before Report Trigger. Is there any way to achieve this using srw or any other PL/SQL code?
This way I can save a lot of devlopment time and use a single physical layout for six different reports and avoid the hassles of creating frames,
repeating frame and formatting.
Any help greatly appreciated.
Let me know if something is not clear in the email. I will provide
additional informationAshok,
Looks like you've landed in the wrong Forum - this one is for Oracle HTML DB.
Thanks,
- Scott - -
XML source content problem in 5.0.2
Hi,
I installed optional web component xml source portlet and I migrated ptxmlsp content in my 5.0.2 portal successfully on MS .NET. I have instentied my portlet with well formed xml and xsl files. Displaying page, portlet display message "Error: Display Timeout". After a look to tomcat log file i found in stderr.log this message :
org.apache.xml.utils.WrappedRuntimeException: The output format must have a '{http://xml.apache.org/xslt}content-handler' property! at org.apache.xalan.serialize.SerializerFactory.getSerializer(SerializerFactory.java:142)
The same problem occurs with a 5.0.2 portal installed on java.
Can anyone help me ?Thank you for your help.
Running xalan on command line with option java -verboseI have seen that tomcat didn't call the xalan.jar located in endorsed directory. We wrote a bat file to launch tomcat as a windows service without reference to "endorsed" directory. You have to include following line in your bat file : -Djava.endorsed.dirs="E:\jakarta-tomcat-4.1.27-LE-j2sdk1.4.1_05\common\endorsed" to ensure that correct java class is loaded.
Now XML souce portlet works fine.
Thanks again. -
Image coming from an xml source and on which we can't click...
Hi everybody !
Is it possible in LiveCycle Designer ES 8.2 (or in coming version of the software) to disable the click event on ImageField ?
I read that it is not possible yet but there is may be another solution to proceed to have an image coming from an xml source and on which we can't click.
Thanks.Hi,
Yes , you can disable image field by setting acces value to readOnly.
Example:
imageField1.access = "readOnly";
It works for Adobe Reader 9
Best regards,
Paul Butenko -
Has anyone seen or heard fo this issue:
I was sent a new xml source code and loaded it into my .rtf file. When I went to preview the file it showed up no problem. All great and dandy!
When I tried to add a field and preview the field would not show up. Yes, there is data in the XML sourse code for the tag.
I decided to run a test and load some of the old XML source code and had no problems. I was able to move fields, add plain text, and delete fields and my changes would display in the preview.
The only thing we can think of that is different is that the previous xml source code was generated from 9. 2. 08 database we recently upgraded to 10g. The new source code is from 10g.
Does this make any sense? Would our upgrade to 10g result in not being able to change the template? Or is it something else?
Thanks,
JessicaTim,
I actually just sent you an e-mail. It contains the rtf and the source codes.
Thanks,
Jessica -
Using NetBeans' Build > Generate Javadoc for Project ...
init:
Warning: Leaving out empty argument '-windowtitle'
Generating Javadoc
Javadoc execution
C:\Program Files\netbeans-5.5.1\projects\Jesdisciple\nbproject\build-impl.xml:392: Javadoc returned -1073741515
BUILD FAILED (total time: 2 seconds)1) How do I include -windowtitle? (That might be more appropriate for the NetBeans list, but I'd appreciate help here as it would save me some time.)
2) What does the error mean and how can I fix it?Hello Paul,
Thank you for your help, but the project that I'm working on I'm unable to send to you the PDF file, for security policies reason.
The form has 11 pages and trying to solve the problem I deleted 10 pages. So now I can see the XML Source but I found a weird thing:
in a Decimal Field, I found up to 65.000 occurrences of
instead of just one. What is it mean?
Is there another way to see the XML source?
Diego -
Splitting XML string as separate fields in message mapping
Hi Experts,
I am getting XML string in one field from source message, i need to separate those fields and map it to target fields.
Sorce message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:test_source xmlns:ns0="urn:gp:prototype">
<Document>
<store>3021</store>
<date>2011-03-24</date>
<type>3002</type>
<till>32</till>
<transaction>1478</transaction>
<data><![CDATA[<buy><merchantID>006001007031992</merchantID><laneID>29</laneID><referenceID>PP0323095107</referenceID><localDate>2011-03-2302:00</localDate><localTime>09:51:0702:00</localTime></buy>]]></data>
</Document>
</ns0:test_source>
Target Message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:test_target xmlns:ns0="urn:gp:prototype">
<item>
<storeID>3021</storeID>
<businessdate>2011-03-24</businessdate>
<Typecode>3002</Typecode>
<workstation>32</workstation>
<SeqNum>1478</SeqNum>
<XX>006001007031992</XX>
<YY>29</YY>
<PP>PP0323095107</PP>
<QQ>2011-03-23+02:00</QQ>
<RR>09:51:07+02:00</RR>
</item>
</ns0:test_target>
Can anyone please suggest me how can we do this???You can easily do both using standard function or simple udf
Use indexOf and substring to achieve this...
Simple UDF
String var1="><![CDATA<buy><merchantID>006001007031992</merchantID><laneID>29</laneID><referenceID>PP0323095107</referenceID><localDate>2011-03-23+02:00</localDate><localTime>09:51:07+02:00</localTime></buy>]>";
String search = "<merchantID>";
if(var1.indexOf(search) != -1){
int pointer = var1.indexOf(search);
return var1.substring(pointer+12, pointer+27);
}else{
return "";
similarly for laneid
search ="<laneID>";
if(var1.indexOf(search)!= -1){
int pointer = var1.indexOf(search);
return var1.substring(pointer+8,pointer+10);
}else{
return "";
Same way you can do for all the elements creating seperate method for each element or just use standard function to achieve this.
Edited by: Baskar Gopal on Mar 24, 2011 10:13 AM -
Defining fields in output ports
I'm using Ep60Sp11 with VC60Sp4 and want to do eventing between iViews.
I can add input and output ports and name them correctly. But the problem is with defining fields in output port. I cannot choose (tick) any of them, although I see them.
In the source tab in output port node there is an entry
"<Output id="AECO8" name="port" ... fields="{}">
Should I do any further settings or this is a bug in VC?
BR/marekHi,
I assume you're referring to iView input and output ports.
There's no need to "tick" fields in ports since ticking fields is for making them visible or hidden in runtime.
Since visibility of fields is not relevant for input and output ports - checking them is not applicable (all fields are transferred).
Hope this helps,
Lior
Maybe you are looking for
-
Deploy par files with code from NWDI
Hello Experts, I have migrated some par files to NWDI and they are deployed via SDM as SDA files. From eclipse it is possible to deploy the par files with Code. Is this possible from NWDI that the par files are deployed with code to the portal server
-
How to do a fresh install of Mountain Lion after clean wipe of MacBook Pro Early 2008 version?
Hey everyone, The following are my computer specs: MacBook Pro 15-inch, Early 2008 Hardware Overview Processor 2.6 GHz Intel Core 2 Duo Memory 4 GB 667 MHz DDR2 SDRAM L2 Cache 6 MB Graphics NVIDIA GeForce 8600M GT 512 MB Software Mac OS X Lion 10.7.4
-
How do I tell which version Macbook Air I own??? Can't tell the date manufactured anywhere..../?????
-
This is with iPad 3 after ios6 update...I be already tried resetting the dates and reboot...not working so far...consistently opening iTunesU on click of iTunes icon.
-
Problem with t-code CS01 in BDC
hi expert, i am working on t-code CS01. i need to upload master data. but in this while making BDC i am facing problem in first screen we have to enter 1. material number 2. plant 3. bom usage in second screen i want upload data upto 0150 item number