XML won't load from server, loads locally

I can't seem to get my project to load my XML file when I
place everything on the server. It works fine when i preview it
using the Flash Player. But when it's loaded into an HTML page on
the server I get nothing. I'm using jquery to dynamically insert
the flash object into the page (In development
here.). The flash object is
actually several folders deeper than the page calling it, and the
XML file is being referenced at the same level as the flash file
itself. I also went through the trouble of putting a
crossdomain.xml file on the server (plu.edu) but that didn't seem
to fix anything.
Here's my
zipped
project.
Where am I doing wrong?
Thanks.

Thanks to everyone who responded to this post. For anyone
else reading this post trying to get XML to load correctly, my
problem was pertaining to the path of the XML file. To remedy this
issue I set a default path that was relative to the .swf file. Then
I used flashvars in the javascript to pass the location of the XML
file. This allows me to preview my flex application locally and in
a production environment when it's inserted into a page. I'll post
my flex and javascript code for anyone interested. I'm using jquery
and the flash plugin.
Thanks.

Similar Messages

Email message won't download from server since installing IOS7

Some of my emails both on my iPad and iPhone won't download from server since installing IOS7!

I'm having the same problem with both my iPhone and iPad after installing iOS7. Checked all the settings and spoke to my email provider and everything is set up properly. It's hit or miss which messages don't download from the server too. And occasionally, a message that does download to my iPad, won't download on my iPhone. Everything on my PC downloads properly, it just seems to be an ios7 issue as this wasn't a problem before. My wife uses the same email provider and is still on iOS6.x with no issues. Any help or suggestions would be great.

Photos not loading from server

Hi experts,
The photos of all employees is put in server.Its loaded to the form using READ_IMAGE_FILE.The code is given
DECLARE
tiff_image_dir varchar2(80):='\\192.168.0.11\photo\';
photo_filename varchar2(80);
begin
:System.Message_Level := '25';
photo_filename := tiff_image_dir||:hr_employee.emp_id||'.BMP';
READ_IMAGE_FILE(photo_filename, 'BMP', 'HR_EMPLOYEE.PHOTO');
end;
IP address of server is mentionedThis code is not working.
The photos will be loading from local machine.
Pls help
Reena

Dear Reena,
In your run window (Start -> Run) type the same path (\\192.168.0.11\photo\) and check whether it is opening. If yes, then try opening the open dialog in forms itself and select the particular path and check whether it is opening or not - use the GET_FILE_NAME built in for opening the open dialog box. Also tell me in which platform (O/S) you have installed the Application Server. (If you installed in Unix related platform then you must use '/' instead of '\')
Regards,
Senthil .A. Perumal.

How to export XML from server to local machine

Hi all
i want to export some XML files from instance to my local machine.right now i m i have Ftpied the files from server to to my local machine but ,but it is not coming with personalization .
thanx in advance
Pratap

Hi Paratap,
If you want to see source of the page use
call jdr_utils.printDocument('/oracle/apps/pos/orders/webui/PosVpoMainPG');
If you want to see the personalization for the source use
call jdr_utils.printDocument('/oracle/apps/pos/orders/webui/customizations/site/0/PosVpoMainPG');
I have given these examples for site level personalization, depanding upon the personalization level the path may vary.
You can also export the files using XMLExporter by giving appropriate path.
You can FTP all other source files from the server.
--Prasanna

List all printers configured from server and local machine when hosted in server machine and working from Client machine

Hello Team
I am developing web application in asp.net. When application run from IIS(hosted in server machine running from client machine using web browser) application should list all the configured printers in local and network.
can any one please let me know the process, in this i was able to load printers from server, so need to load printers from local machine.
Thanks in Advance
Bindu

Hi Bindu,
I am developing web application in asp.net. When application run from IIS(hosted in server machine running from client machine using web browser) application should list all the configured printers in local and network.
From this message, this is a web application in asp.net, and it also related to IIS.
You should post in the dedicated ASP.Net Forum
http://forums.asp.net
For IIS issue, http://forums.iis.net/ IIS forum should post.
Thanks
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to validate data is in specific list while loading from SQL*Loader

I have a sample data file like below
1,name1,05/02/2012 10:00:00,blue
2,name2,06/02/2012 10:00:00,red
3,name3,07/02/2012 10:00:00,yellow
4,name4,08/02/2012 10:00:00,white
I would like to validate 4Th column to be a valid color (ie) All color should be in a specific list, if it is not in the lis then the record should do to bad/discard file
How can do that while loading Data From SQL*Loader?

user8860934 wrote:
I have a sample data file like below
1,name1,05/02/2012 10:00:00,blue
2,name2,06/02/2012 10:00:00,red
3,name3,07/02/2012 10:00:00,yellow
4,name4,08/02/2012 10:00:00,white
I would like to validate 4Th column to be a valid color (ie) All color should be in a specific list, if it is not in the lis then the record should do to bad/discard file
How can do that while loading Data From SQL*Loader?Probably a lot easier with an EXTERNAL TABLE (they're much more flexible).
Is SQL Loader a mandatory requirement for some reason?

Mail won't download from server

I downloaded the new software on my iPhone 4 and installed it. Now my yahoo mail won't download from the server. I rebooted, deleted the mail account and reinstalled, and restored the software too. Any ideas?

Not knowing what’s really going on here, and since re-creating Envelope Index apparently didn’t work, you may try setting up Mail again from scratch, as follows:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/. Move (not copy) the entire Mail folder out of there, to the Desktop.
3. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop.
4. Open Mail and set it up again from scratch. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and check that everything works fine.
You’ll have to re-configure all your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
5. If Mail works fine now, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import your mail from the old Mail folder that’s now on the Desktop. Import the Mailboxes folder first, then each of the POP-username@mailserver account folders.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that may help to fix that.
Do with the imported mail whatever you wish. You may move the messages anywhere you wish and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Download from server to local?

Hi,
Is there an FM to download file from server(AL11) to local using SAVE DIALOG?
tnx, Adibo.

Tnx !!
REPORT z_upload_doc.
DATA: lv_pad TYPE dxfields-longpath,
      lv_pad_doc TYPE dxfields-longpath.
DATA: lv_filename TYPE sdbah-actid,
      lv_extension TYPE sdbad-funct.
SELECTION-SCREEN BEGIN OF BLOCK selectie WITH FRAME TITLE text-024.
PARAMETERS:     pa_pdf RADIOBUTTON GROUP con,
                pa_txt RADIOBUTTON GROUP con.
SELECTION-SCREEN END OF BLOCK selectie.
START-OF-SELECTION.
IF pa_pdf = 'X'.
    PERFORM get_path USING 'ORDERCONFIRMATION_PDF'.
ELSE.
    PERFORM get_path USING 'ORDERCONFIRMATION_ACII'.
ENDIF.
END-OF-SELECTION.
FORM get_path USING path.
SELECT SINGLE low
    FROM tvarvc
    INTO lv_pad WHERE name = path.
IF lv_pad IS NOT INITIAL.
    CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
      EXPORTING
        i_path         = lv_pad
      IMPORTING
        o_path         = lv_pad_doc
      EXCEPTIONS
        rfc_error      = 1
        error_with_gui = 2
        OTHERS         = 3.
    IF sy-subrc <> 0.
    ELSE.
      CALL FUNCTION 'SPLIT_FILENAME'
        EXPORTING
          long_filename = lv_pad_doc
        IMPORTING
          pure_filename = lv_filename
          pure_extension = lv_extension.
      CALL FUNCTION 'TH_DOWNLOAD_BINFILE'
        EXPORTING
         filename                   = lv_filename
         directory                  = v_extension
         with_dialog                = 'X'
         buflines                   = 100
         start_position             = 0
         end_position               = 0
     EXCEPTIONS
         file_open_error            = 1
         user_canceled              = 2
         file_write_error           = 3
         no_authority               = 4
         error_no_gui               = 5
         cntl_error                 = 6
         not_supported_by_gui       = 7
         disk_full                  = 8
         position_error             = 9
         misc_error                 = 10
         access_denied              = 11
         OTHERS                     = 12
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "get_path

Messages in Mail not loading from server.

I have 3 mail boxes in my Mail account and one of them is not loading mail from the server. I checked the online web site for my e-mail server and there is mail there I have not received.

If you can’t send or receive email on your Mac - Apple Support

Desktop app for Creative Cloud won't download from server.

Can't down load the creative cloud desktop app. get error sign from the installer i.e."we've encountered the following issues: the server is not responding currently. Please try after some time (Error code: 207) This error has come up for over a day, maybe two days now.

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Loading and download SWFs for AIR apps on iOS from server

Dear
I develop app for ios using adobe air i need to loading and download swf in my server to my local device
i make it loading from server and play but i need to download it locally in device to play offline
Please Help
Thank You

If I undestand correct, the unload() is unsuported yet, so it just hangs in the memory
In the tests I did, when I put two loads for the same swf, the app freezes, so I don´t know what you can do there.
For the "code", you just need to put the LoaderContext on the loads, something like this:
Frame 1:
var myLoader:Loader;
var loaderContext:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null);
if(myLoader == null){myLoader = new Loader(); addChild(myLoader); }
else {myLoader.unload();}
Frame 2:
myLoader.unload();
myLoader.load(new URLRequest("file1.swf"),loaderContext);
Frame 3:
myLoader.unload();
myLoader.load(new URLRequest("file2.swf"),loaderContext);
Frame 4:
myLoader.unload();
myLoader.load(new URLRequest("file3.swf"),loaderContext);
Regards,
Rogério Gonzalez

The problem to retrieve and edit Universe from server

I use CmsResourceService.retrieveUniverse to retrive *.unx from server to local.
Then , I use LocalResourceService to load *.blx and cast to RelationalBusinessLayer and throws exception in my program.
The exception is
NestedException Interface requested not found : csLIB
com.sap.tools.commons.exception.NestedException: Interface requested not found : csLIB
at com.sap.tools.commons.exception.NestedException.create(Unknown Source)
at com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder.getPRM(DataFoundationSQLDecoder.java:81)
at com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder.<init>(DataFoundationSQLDecoder.java:96)
at com.businessobjects.mds.services.parser.decoder.UniverseSQLDecoder.<init>(UniverseSQLDecoder.java:40)
at com.businessobjects.mds.services.parser.EncodeDecodeHelper.decodeExpression(EncodeDecodeHelper.java:301)
at com.businessobjects.mds.services.helpers.BindingHelper.decodeExpression(BindingHelper.java:250)
at com.businessobjects.mds.services.helpers.BindingHelper.decodeResultExpression(BindingHelper.java:264)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.getResultExpression(MdsToSdkBusinessLayerConverter.java:336)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.copyBusinessItemProperties(MdsToSdkBusinessLayerConverter.java:296)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.createSdkItem(MdsToSdkBusinessLayerConverter.java:251)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.copyMdsToSdk(MdsToSdkBusinessLayerConverter.java:212)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.copyMdsToSdk(MdsToSdkBusinessLayerConverter.java:217)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.MdsToSdkBusinessLayerConverter.createSdkModel(MdsToSdkBusinessLayerConverter.java:146)
at com.sap.sl.sdk.authoring.businesslayer.internal.services.BusinessLayerModelToModel.createSdkModel(BusinessLayerModelToModel.java:31)
at com.sap.sl.sdk.authoring.local.internal.services.LocalResourceServiceImpl.createSdkBusinessLayer(LocalResourceServiceImpl.java:187)
at com.sap.sl.sdk.authoring.local.internal.services.LocalResourceServiceImpl.loadInternal(LocalResourceServiceImpl.java:168)
at com.sap.sl.sdk.authoring.local.internal.services.LocalResourceServiceImpl.load(LocalResourceServiceImpl.java:130)
at com.sap.sl.sdk.authoring.samples.EditUniversesDemo.editUniverse(EditUniversesDemo.java:82)
at com.sap.sl.sdk.authoring.samples.EditUniversesDemo.main(EditUniversesDemo.java:38)
Caused by: com.sap.connectivity.cs.core.CSError: Interface requested not found : csLIB
at com.sap.connectivity.cs.extended.ImplementationManager.getImplementation(ImplementationManager.java:151)
at com.sap.connectivity.cs.extended.ImplementationManager.getConfiguration(ImplementationManager.java:195)
at com.sap.connectivity.cs.extended.NLDBProvider.populateMap(NLDBProvider.java:49)
at com.sap.connectivity.cs.extended.NLDBProvider.getManager(NLDBProvider.java:157)
at com.sap.connectivity.cs.extended.Provider.getEnvironment(Provider.java:93)
at com.sap.connectivity.cs.extended.ConnectionServer.JobProfile(ConnectionServer.java:532)
at com.sap.connectivity.cs.api.trace.EnvironmentLogger.JobProfile(EnvironmentLogger.java:609)
at com.businessobjects.mds.services.relational.PrmProperties.getDbParameterSet(PrmProperties.java:1394)
at com.businessobjects.mds.services.relational.PrmProperties.loadFunctions(PrmProperties.java:1437)
at com.businessobjects.mds.services.relational.PrmProperties.loadParameters(PrmProperties.java:1411)
at com.businessobjects.mds.services.relational.PrmProperties.<init>(PrmProperties.java:155)
at com.businessobjects.mds.services.relational.CsService.getPRMProperties(CsService.java:1159)
at com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder.getPRM(DataFoundationSQLDecoder.java:79)
... 17 more
Caused by: java.lang.UnsatisfiedLinkError: no cs_jni in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.sap.connectivity.cs.library.ConnectionServer.<clinit>(ConnectionServer.java:330)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.businessobjects.connectionserver.ConnectionServer.getImplementation(ConnectionServer.java:428)
at com.businessobjects.connectionserver.ConnectionServer.getInstance(ConnectionServer.java:132)
at com.sap.connectivity.cs.extended.ImplementationManager.getImplementation(ImplementationManager.java:144)
... 29 more
But If I use IDT Tool to create unx in the local and publish to the server. I use the same program and I can load blx in the program without exception.

Hello Iris,
If you are using Eclipse IDE to run the application for Editing local business layer, please follow the below instructions:-
Add the jars in the class path by configuring the build path of your project & add all the jars from the location "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\java". These jars contains the interfaces which is requested by Semantic Layer based applications.
Go for Run->Run Configurations->Arguments->VM Arguments. Define the location of your connection server such as -Dbusinessobjects.connectivity.directory="C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer".
Go for Run->Run Configurations->Environment. Declare a new environment variable path specific to the java class & point it to the location C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86 which contains all the BusinessObjects DLL to make the communication between UNX universe to the database.
Build & Clean your project & run your application once again.
If you are using the standalone deployment, you can try the below steps:-
Create a batch file for compiling the java program containing Semantic Layer Java code.
declare the classpath & define all the libraries in the classpath from the below folder:
C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\java
C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\SL SDK\java
define the java compile command with the name of the java class along with the class path entries.
set the environment variable to point the BusinessObjects DLLs: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86
define the java run command to run the java program along with the JVM argumnets: -Dbusinessobjects.connectivity.directory="C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer
Please refer the attached txt file, convert the attached .txt file to .bat file, do the necessary changes according to your environments & try to run the batch file.
Hope it helps.
Thanks,
Shailendra

Re: Need to download AM from Server into JDeveloper

Hi,
I have exported the OAF page from the server.
While exporting the AM from the server i get error as
D:\JDev9\jdevbin\jdev\bin>export /oracle/apps/ap/oie/server/HomePageAM -rootdir
D:\JDev9\jdevbin\jdev\bin\myprojects -username apps -password apps -dbconnection
"(description = (address_list = (address = (community = tcp.world)(protocol = t
cp)(host =192.168.2.222)(port = 1521)))(connect_data = (sid = vis)))"
Error: Document "/oracle/apps/ap/oie/server/HomePageAM" does not exist in the re
pository.
Export failed.
Plz help me to solve the error.
Thanks in Advance.

View Object has three files.. Vo.xml, VOImpl.class and VORowImpl.class
you need to copy VO.xml to myprojects and VO.xml, VOImpl.class and VORowImpl.class to myclasses manually..
if your using 11i, then you need to add an entry in server.xml ..
if your not sure how to add an enty in server.xml then ftp the whole directory from server to local machine..
And then place the directory in myclasses and myprojects...
You jdeveloper may throw error like VOImpl.java not found.. but it doesn't matter, just ignore it..
--Prasanna

Need faster data loading (using sql-loader)

i am trying to load approx. 230 million records (around 60-bytes per record) from a flat file into a single table. i have tried sql-loader (conventional load) and i'm seeing performance degrade as the file is being processed. i am avoiding direct path sql-loading because i need to maintain uniqueness using my primary key index during the load. so the degradation of the load performance doesn't shock me. the source data file contains duplicate records and may contain records that are duplicates of those that are already in the table (i am appending during sql-loader).
my other option is to unload the entire table to a flat file, concatenate the new file onto it, run it through a unique sort, and then direct-path load it.
has anyone had a similar experience? any cool solutions available that are quick?
thanks,
jeff

It would be faster to suck into a Oracle table, call it a temporary table and then make a final move into the final table.
This way you could direct load into an oracle table then you could
INSERT /*+ APPEND */ INTO Final_Table
    SELECT DISTINCT *
    FROM   Temp_Table
    ORDER BY ID;This would do a 'direct load' type move from your temp teable to the final table, which automatically merging the duplicate records;
So
1) Direct Load from SQL*Loader into temp table.
2) Place index (non-unique) on temp table column ID.
3) Direct load INSERT into the final table.
Step 2 may make this process faster or slower, only testing will tell.
Good Luck,
Eric Kamradt

Xml file not loading from different server

Hi,
I have a simple flash banner that is pulling a number from an xml file on a different server. When it gets to the frame where the number should be it just says "transferring data from eckul.com" and will not actually pull in the number. Unfortunately I can't put the files on the same servers. Any help would be much appreciated, below are the links and the xml code I'm using followed by the action script. Cheers
http://www.sainters.net/newsletters/2010/flash_test_membership2.html
http://www.eckul.com/number.xml
<?xml version="1.0"?>
<inventors>
    <person>
        <name>892</name>
        </inventors>
function loadXML(loaded) {
if (loaded) {
_root.inventor = this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
_root.comments = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
name_txt.text = _root.inventor;
comment_txt.text = _root.comments;
} else {
trace("file not loaded!");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("http://www.eckul.com/number.xml");

so, in frame 1 of your fla before you execute that cross-domain load method, use:
System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
<!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
</cross-domain-policy>
and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
</cross-domain-policy>

XML won't load from server, loads locally

Similar Messages

Maybe you are looking for