Xmlbeans, xmlobject and how to switch between them

I have a WLI JMS control that I use to send a created xml document to a topic (using the sendTextMessage(XmlObject xmlpayload) method). On the other side I have a standalone java process that reads from the topic. I expected an xmlmessage to come across, but it's a textmessage. How do I take the incoming textmessage and manipulate it to get the contents? I've just started working with XML so while it might be obvious to some, I'm not sure how to approach it. All suggestions are appreciated.

Hi
Found this details on Intel page:
http://www.intel.com/content/www/us/en/wireless-products/wifi-link-5100-brief.html
It seems that Intel 5100 WLan card supports 802.11 A/B/G and N so it will operates at 2.4GHz and 5.0GHz.
The Wlan card is also available in miniPCIe format so it should be possible to insert this into the WLan slot on the mobo.but question is if the BIOS would supports this
To be honest I dont know there are no info about that and according to some users here in the forum, it could be possible that notebook would not power up using new WLan card.

Similar Messages

HT201272 Can't download any apps. I have 2 itunes accounts, and happened to switch between them, now neither works.

I can't download apps from appstore. I have 2 itunes accounts and happened to have switched between them last night, now neither works. Someone broke into my original account and racked up charges, Apple closed it for me and suggested I open a new one,which I did, then they reinstated the original account. Some apps need to go to the second account to update since I had to resort to the new account while Apple took several months to figure out what happened, so I am stuck switching on occassion to update apps. When I went back to the primary account, I cannot download anything. I tried quitting both accounts, but nothing works. Help please!

Hello there, Gwald.
The following Knowledge Base article offers some great recommendations for troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Specific to iPad are the following:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Qosmio x770-136 Dual band wifi 2.4 and 5ghz - how to switch between them?

Hi Guys,
getting a new router netgear dual band N900, and it supports multi 2.4-5ghz wifi,
my question is how to i set my qosmio up at 5ghz?
thanks for any replies

Hi
Found this details on Intel page:
http://www.intel.com/content/www/us/en/wireless-products/wifi-link-5100-brief.html
It seems that Intel 5100 WLan card supports 802.11 A/B/G and N so it will operates at 2.4GHz and 5.0GHz.
The Wlan card is also available in miniPCIe format so it should be possible to insert this into the WLan slot on the mobo.but question is if the BIOS would supports this
To be honest I dont know there are no info about that and according to some users here in the forum, it could be possible that notebook would not power up using new WLan card.

I have several Outlook accounts and want to switch between them but Firefox defaults to the main one and won't let me access the others.

Outlook now makes me sign out and sign back in to each of my email accounts. When I try to sign back in, it defaults to the main account and won't let me type in the other email addresses. This only happens in Firefox, both Google and IE leave the email address blank and let me type in the one I want to access. I'd rather use Firefox, but it doesn't let me type in a different email address. Can I fix this?

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Can I have two or more JVMs in one mashin and switch between them?

Hi all,
I want to have two JVMs in one mashin and switch between them via a httpListener. If I can, could you please guide me to do it?
Thanks in advance,
Orod Semsarzadeh

may be my question is not fully clear. I mean, I want to have an bottun in my JSP when I click on it, 1 thread will be created and work in another JVM.

Can i set up two emails accounts on the mail function tab and switch between them

I would like to be able to set up two email accounts on the mail tab on the Iphone 5 and switch between them, is this possible?

Yes it is possible to set up multiple accounts but you cannot switch between them in the mail app. What you can do in settings/mail etc is have one set as active an dthe other as inactive and you can change that from time to time if you want

I have multiple itunes libraries. why can't i switch between them (i can see them in the dialog box but they are not select-able)?

i have a numbe of libraries; i have never had any problems switching between them. now, when i press alt button and click through to 'choose library...', i am seeing all of my libraries in the dialog box but they are 'greyed' out and i cannot select them.
any help would be appreciated.
thanks,
ohad.

You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.
* http://kb.mozillazine.org/Spell_checking
* http://kb.mozillazine.org/Dictionaries
* https://support.mozilla.org/kb/Using+the+spell+checker

How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

MSI R9 290 How to switch between Gaming Modes?

Hi, I just got a MSI R9 290... with Afterburner installed. This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes? I just tried to up the MHz in Afterburner and must have done something wrong, becuase I froze everything instalntly and had to reboot. Can someone please advise me how to switch between these modes? Do I have the right software installed, Afterburner or is there another suite specificly for this card? I did not install the card, and sorry I am a noob when it comes to OC. . . Noob to gaming in general, but I am getting some pretty bogus 30FPS on a 2012 game, LA Noire, which shouldnt even be demanding for t

Quote from: kris.meaney on 07-March-15, 18:45:04
This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes?
You need the Gaming APP for switching (not Afterburner): http://download.msi.com/uti_exe/gamingApp.zip
Afterburner is for manual overclocking (for advanced users) if not using the modes.

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

I Have the same problem, I switched off location services, maps in data, whatever else maps could be involved in nd then just last nite it chewed 100mb... I'm also on vodacom so I'm seeing a pattern here somehow. Siri was switched on however so I switched it off now nd will see what happens. but I'm gonna go into both apple and vodacom this afternoon because this must be sorted out its a serious issue we have on our hands and some uproar needs to be made against those responsible!

How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

How do i get my podcasts to go from the one i just finished to the next one and how do i sort them from oldest to newest?

how do i get my podcasts to go from the one i just finished to the next one withouth me having to click on it, and how do i sort them from oldest to newest?

Not sure if you tried this, but did you hold down both the sleep and home button for 10 seconds?

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

Once you're on a spammer's list, there's nothing you can do to stop the flood of e-mail messages. You can either control it, using spam filtering (which is what files those messages in the Junk Mail folder), or you can throw out your e-mail address and get a new one.
It's sad, but spam is simply a fact of life at this point, and there's nothing to be done about it. Legislation has been tried, with zero success, since most spam either comes from countries with no legislation or from personal computers that have been infected with malware and are part of a "botnet."

Xmlbeans, xmlobject and how to switch between them

Similar Messages

Maybe you are looking for