Xorg 7.4: when?

Hi, is there a chance to see xorg 7.4 hit the repos within a few days (or weeks)? Maye it has not been tested enough?
Thanks for any reply.

I'm using testing on two ATI systems with no problems. One with a Radeon 9250 (R200) and the other has a X1650 Pro (R500), both with the free -ati driver.
And even if you want to use Catalyst, fear not. Andy took care of that one, too. ;-)

Similar Messages

  • Xorg/openbox stalls when changing date

    Anytime I change a date with 'date' command, Openbox/Xorg sort of freezes (everything stalls except cursor changes when passing over terminal). I can still kill Xorg though with Ctrl+Alt+F1 and Ctrl-C.
    Then I set the date again outside Xorg and start Openbox/Xorg again, that works fine.
    Does anyone know what is the problem? This bug was introduced relatively recently, I remember that before I could change the date from inside Openbox/Xorg...
    Thanks.

    appreciate if someone can assist with my errors as mentioned in my first post.'
    Thanks.

  • Xorg shutting down when certain keys are pressed

    Hello after some recent updates, I've experienced that xserver is shutting down and I need to restart my computer to get a working a system back.
    When I hold keys like backspace arrow keys this happens, anyone experienced the same lately?

    (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device G15 Keyboard G15 Keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Gaming Keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Gaming Keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Logitech USB Gaming Mouse
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    I have disabled the hotplugging in my config.

  • Xorg crashes when gamepads removed

    I have a cheap off-brand PS2 (as in the system, not the old interface) gamepad to USB hookup I use for gaming. Recently, when I started plugging it in (hadn't used it for a while, no idea what update broke it) Xorg started crashing when I unplugged it. It works fine when plugged in, but Xorg immediately crashes back to the console (but doesn't close out, so I have to hard power the system) when I remove the controller. Mice and other devices work without problem, but my roommate's 360 USB controller also causes the problem.
    Will provide more info if needed.
    http://paste.ubuntu.com/593895/ - Xorg log when it crashes (reproduced).
    Last edited by GourdCaptain (2011-04-14 07:16:08)

    I'd just like to say I have the same issue, about to check in a minute or two if this fix works.
    EDIT: Works. Isn't this in a core arch package, so might sneak back in? If that's the case, is there a more "proper" fix?
    EDIT 2: A quick `pacman -Qo ...` says it's part of xorg-server. That could be a major pain. A proper fix is very welcome
    Last edited by duckinator (2011-04-16 01:36:49)

  • Xorg crashes when gaming

    Hello
    Xorg crashes systematically when I play such games as Supertuxkart, Supertux, 0ad, Ennemy-Territory, Pingus,... It does also the same with google-earth
    I can start playing but after some time, I get a black screen, my keybord gets blocked and the only when out is to make a hard shutdown.
    Stopping the computer "manually" has also the disadvantage that the Xorglog gets lost, so I cannot see what causes the problem.
    I am using Arch x86_64 with the last nvidia driver (I have a GeForce GT320 card) and I have installed the lib32 packages that are going with the video drivers.
    Any idea on how to solve this problem?
    Thanks

    I'm not an expert, but if only X crashed, you should be able to use REISUB https://wiki.archlinux.org/index.php/Keyboard_Shortcuts
    If you can't do even this, then it may be not just X, but the kernel.

  • New install, when I startx, nothing moves

    I installed arch on an old laptop.
    I installed xorg and fluxbox.
    when I startx, the keyboard and touchpad do nothing. I have to reboot.
    here is xorg.conf:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    Load "glx"
    Load "freetype"
    Load "synaptics"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "latitude"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsTouchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    #Option "Device" "/dev/input/mice"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "false" # configurable at runtime? security risk
    Option "LeftEdge" "1700" # x coord left
    Option "RightEdge" "5300" # x coord right
    Option "TopEdge" "1700" # y coord top
    Option "BottomEdge" "4200" # y coord bottom
    Option "FingerLow" "25" # pressure below this level triggers release
    Option "FingerHigh" "30" # pressure above this level triggers touch
    Option "MaxTapTime" "180" # max time in ms for detecting tap
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
    Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
    Option "CoastingSpeed" "0.30" # corner coasting speed
    Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
    Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
    Option "MinSpeed" "0.10" # speed factor for low pointer movement
    Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
    Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
    Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
    Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5 - 64.3
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-60
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** NeoMagic (generic) [neomagic]"
    Driver "neomagic"
    #VideoRam 2048
    # Chipset "NM2160"
    # IOBase 0xfea00000
    # MemBase 0xfd000000
    # VideoRam 2048
    # DacSpeed 90
    # Option "linear"
    # Option "nolinear"
    # Option "sw_cursor"
    # Option "hw_cursor"
    # Option "no_accel"
    # Option "intern_disp"
    # Option "extern_disp"
    # Option "mmio"
    # Option "no_mmio"
    # Option "lcd_center"
    # Option "no_stretch"
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** NeoMagic (generic) [neomagic]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "USB Mouse" "CorePointer"
    InputDevice "SynapticsTouchpad" "SendCoreEvents
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection

    Redroar wrote:
    Edit: foolish me. I thought I had read your entire xorg.conf, and yet missed the very obvious top. Should've known better. I think it's time to go to sleep.
    Edit2: maybe unfoolish me. You have 2 ServerFlags sections. I don't know, maybe get rid of the big spanning one that has loads of comments in it. I wonder if the AutoAddDevices thing simply isn't getting read because of a syntax error?
    That worked!
    Thanks.

  • Problems running xfce (&icewm), issues with xorg...?

    Hi,
    I am making a 2. attempt at arch linux. I have installed arch on my laptop. The first problem I don't seem to be able to overcome without help is getting xorg working.
    When i run startx the tty hangs. Its not even recovered by killing startx from another tty.
    First i tried startx without exec. This is the exception in that it did not hang. Then i tried startex with "exec startxfce4" in the .xinitrc. I tried again after a reboot becouse of the message:
    /usr/bin/startxfce4: X server already running on display :0
    I made an additional attemt using icewm in place of xfce, it did also hang the tty.
    My laptop has an integrated intel graphics chip, as well as a NVIDIA dedicated graphics card.
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [NVS 4200M] (rev a1)
    At first I tried installing only the NVIDIA driver, but they did not load correctly, assuming I understand the logs. The same with the intel driver. As a result, xorg did not recognize my display. Therefore I have all of the following installed:
    xf86-video-intel      xf86-video-nouveau  nvidia  xf86-video-vesa
    When I explicitly installed the vesa driver, I did not see an error saying that no monitor was found.
    In addition i have the following packages installed:
    xorg-server xorg-server-utils xorg-xinit  xfce4 icewm
    In addition I may have done
    pacman -S xorg and chosen the default xf86-input-evdev
    I have put the logs and such here:
    http://folk.uio.no/henrikq/arch/xorg/
    I have no idea what to do at this point, so help would be appreciated.

    Sorry about the long absence, I have been busy.
    I do indeed have Optimus. I had a friend look at the problem. He set me up with an .xinitrc and xorg.conf. We got stuck at black screen on startx. I have managed to account for all error but one:
    [ 111.205] (EE) Screen 1 deleted because of no matching config section.
    xrandr --listproviders, gives:
    Providers: number : 2
    Provider 0: id: 0x2af cap: 0x1, Source Output crtcs: 0 outputs: 0 associated providers: 0 name:NVIDIA-0
    Provider 1: id: 0x43 cap: 0x2, Sink Output crtcs: 2 outputs: 2 associated providers: 0 name:modesetting
    I have put log files etc here:
    http://folk.uio.no/henrikq/arch/xorg2/

  • Xorg / catalyst / kernel upgrade - Frozen screen and input [SOLVED]

    I knew it, never upgrade xorg/graphic drivers when using ATI cards, just bless your god when it works and never touch it again. But I got tempted and I did a full system upgrade, and now... my xorg is broken.
    I'm using ATI proprietary drivers catalyst 8.12-1 with xorg 1.5.3-3. My card is an ATI x1950 pro.
    It used to work perfectly, but since the update, when i startx I just get a terminal (because of my .xinitrc) in fullscreen without my window manager getting launched, and my mouse in the middle of the screen; and nothing responds the mouse won't move, even ctrl+alt+backspace won't work. I have to ssh on my machine and 'killall X'.
    I tried starting off with a default config (using aticonfig --initial -f), but still the same problem.
    I have a dual screen setup.
    I disabled AIGLX and Composite, but no success.
    If I fail to repair this, since I made a backup of my pacman database, I could revert it right ?
    Please help us, us pwned ATI users !
    Here is the /var/log/Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux fatale 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
    Build Date: 05 December 2008 09:10:55PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 13 03:36:24 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "ScreenSamsung" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "PS/2 Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "Xinerama" "true"
    (**) Option "AIGLX" "false"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) Xinerama: enabled
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is disabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling PS/2 Mouse
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d5900
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc RV570 [Radeon X1950 Pro] rev 0, Mem @ 0xe0000000/0, 0xf5000000/0, I/O @ 0x00008000/0, BIOS @ 0x????????/131072
    (--) PCI: (0@1:0:1) ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) rev 0, Mem @ 0xf5010000/0
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (--) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (WW) Warning, couldn't open module record
    (II) UnloadModule: "record"
    (EE) Failed to load module "record" (module does not exist, 0)
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    Module class: X.Org Video Driver
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.56.4
    (II) ATI Proprietary Linux Driver Release Identifier: 8.561
    (II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 4.1
    (--) Assigning device section with no busID to primary device
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    (--) Chipset Supported AMD Graphics Processor (0x7280) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x9377518
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "dri" "true"
    (**) fglrx(0): Option "KernelModuleParm" "agplock=0"
    (**) fglrx(0): Option "RingSize" "8"
    (**) fglrx(0): Option "EnableDepthMoves" "yes"
    (**) fglrx(0): Option "UseInternalAGPGART" "no"
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    ABI class: X.Org Server Extension, version 1.1
    (--) fglrx(0): Chipset: "Radeon X1950 Series" (Chipset = 0x7280)
    (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x0762)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    (--) fglrx(0): MMIO registers at 0xf5000000
    (--) fglrx(0): I/O port at 0x00008000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (**) fglrx(0): Option "mtrr" "on"
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 9.13
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: RV570
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): Using adapter: 1:0.0.
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000090, disabled=0x00000000
    (II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: NUL Model: 1 Serial#: 1
    (II) fglrx(0): Year: 2001 Week: 1
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) fglrx(0): Sync: Separate
    (II) fglrx(0): Max Image Size [cm]: horiz.: 31 vert.: 23
    (II) fglrx(0): Gamma: 1.00
    (II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY: 0.566
    (II) fglrx(0): blueX: 0.153 blueY: 0.131 whiteX: 0.310 whiteY: 0.328
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 65.0 MHz Image Size: 304 x 228 mm
    (II) fglrx(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1184 h_border: 0
    (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
    (II) fglrx(0):
    (II) fglrx(0):
    (II) fglrx(0): Monitor name:
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff003aac010001000000
    (II) fglrx(0): 010b0103081f1700caf0649857519127
    (II) fglrx(0): 214f54afce0001010101010101010101
    (II) fglrx(0): 010101010101641900a0400026301888
    (II) fglrx(0): 360030e410000018000000fe000a2020
    (II) fglrx(0): 20202020202020202020000000fe000a
    (II) fglrx(0): 202020202020202020202020000000fc
    (II) fglrx(0): 000a202020202020202020202020000e
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Connected Display2: DFP on secondary TMDS [tmds2i]
    (II) fglrx(0): Display2 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: SAM Model: 1e5 Serial#: 1212821817
    (II) fglrx(0): Year: 2006 Week: 7
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: Off
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@67Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 832x624@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1280x1024@75Hz
    (II) fglrx(0): 1152x870@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
    (II) fglrx(0): Monitor name: SyncMaster
    (II) fglrx(0): Serial No: HMEL205539
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff004c2de50139314a48
    (II) fglrx(0): 0710010380261e782ade95a3544c9926
    (II) fglrx(0): 0f5054bfef8081808140714f01010101
    (II) fglrx(0): 010101010101302a009851002a403070
    (II) fglrx(0): 1300782d1100001e000000fd00384c1e
    (II) fglrx(0): 510e000a202020202020000000fc0053
    (II) fglrx(0): 796e634d61737465720a2020000000ff
    (II) fglrx(0): 00484d454c3230353533390a20200056
    (II) fglrx(0): End of Display2 EDID data --------------------
    (WW) fglrx(0): More than one displays are connected,so clone mode is enabled
    (II) fglrx(0): Primary Controller - DFP on secondary TMDS
    (II) fglrx(0): Secondary Controller - CRT on secondary DAC
    (II) fglrx(0): Internal Desktop Setting: 0x00000008
    (II) fglrx(0): POWERplay version 3. 1 power state available:
    (II) fglrx(0): 1. 574/682MHz @ 0Hz [enable load balancing]
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 24 modes found for primary display.
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
    (**) fglrx(0): *Mode "1280x1024_mine": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024_mine"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (**) fglrx(0): Default mode "1280x1024_mine": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024_mine"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (**) fglrx(0): *Mode "1280x1024": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
    (**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
    (**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
    (**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
    (**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
    (II) fglrx(0): Modeline "1280x720"x50.0 60.46 1280 1328 1456 1632 720 721 724 741 +hsync (37.0 kHz)
    (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
    [.. Millions of ModeLine's..]
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.0
    ABI class: X.Org Video Driver, version 4.1
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): Ring buffer size: 8 MB
    (**) fglrx(0): KernelModuleParm: "agplock=0"
    (II) fglrx(0): [pcie] 262144 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Direct rendering enabled
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Interrupt handler installed at IRQ 16.
    (II) fglrx(0): Exposed events to the /proc interface
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (II) fglrx(0): detected X.org 7.4.3.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenByBusid: drmOpenMinor returns 13
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x4d000
    (II) fglrx(0): [drm] mapped SAREA 0x4d000 to 0xb7af0000
    (II) fglrx(0): [drm] framebuffer handle = 0x4e000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.56.4
    (II) fglrx(0): Date: Dec 1 2008
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x0004f000
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1280 x 2256
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 80
    (II) fglrx(0): GLESX is enabled
    (**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Setting up tile and stipple cache:
    32 128x128 slots
    14 256x256 slots
    5 512x512 slots
    (II) fglrx(0): Acceleration enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (WW) fglrx(0): Option "AccelMethod" is not used
    (WW) fglrx(0): Option "AccelDFS" is not used
    (WW) fglrx(0): Option "GARTSize" is not used
    (WW) fglrx(0): Option "BufferSize" is not used
    (WW) fglrx(0): Option "UseFBDev" is not used
    (WW) fglrx(0): Option "ColorTiling" is not used
    (WW) fglrx(0): Option "RenderAccel" is not used
    (WW) fglrx(0): Option "SubPixelOrder" is not used
    (WW) fglrx(0): Option "DynamicClocks" is not used
    (WW) fglrx(0): Option "PCI:1:0:0" is not used
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 14, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 14, (OK)
    drmOpenByBusid: drmOpenMinor returns 14
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Shutdown CMMQS
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x4d000 at 0xb7af0000
    Thanks :)
    edit: weird thing (or not) but DPMS (or whatever it is, the thing that turns off my monitor after some time) seems to work, altough moving the mouse or pressing the keyboard doesn't wake up the screen. Has this something to do with my mouse and keyboard not being recognized by xorg ?
    edit2: omg yes it is ! I added:
    urxvtc -e 'screen'
    so when I startx an un-window-managered fullscreen terminal launches with a screen session, and if I ssh on it I can type in this terminal from another computer, and the screen actually displays what I'm typing, so that's definitely an input problem !
    Final Edit: Well all solved, concerning the "frozen" stuff, it was just that my keyboard and mouse weren't detected because of the new hotpulg thingy (check http://wiki.archlinux.org/index.php/Xor … otplugging for more info, or just add 'hal' to your rc.conf), then restored my original xorg.conf, rebooted and it all went back to normal (: ). Hope this helps.
    Last edited by arsenist (2008-12-13 03:28:42)

    Has this something to do with my mouse and keyboard not being recognized by xorg
    Hmm, I wonder what it would reveal if someone read the news? http://www.archlinux.org/news/424/
    Even your Xorg.0.log is telling you the problem.
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling PS/2 Mouse
    Last edited by jacko (2008-12-13 03:28:40)

  • Xorg 1.5rc6 screws up urxvt in xmonad

    I have the testing repository enabled and i have an nVidia card so i upgraded my xorg-server, but when I restarted X and opened up an instance of urxvt it came out all funny, it isn't tiled and it doesn't get focus, but i can type in it. Does anyone have an idea
    i tried recompiling xmonad and urxvt but that didn't work.
    Last edited by Vintendo (2008-09-03 15:28:43)

    Set urxvt borderless through your WM. Certainly openbox can do it. Here's some discussion I had about this topic on the openbox mailing list:
    http://comments.gmane.org/gmane.comp.wi … enbox/3947

  • [SOLVED] nvidia and xorg-server, slow start compared to nv

    I've seen many similar topics but none that have been solved, therefore the new topic.
    Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    EndSection
    The /var/log/Xorg.0.log when using nvidia:
    [ 22.779]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 22.779] X Protocol Version 11, Revision 0
    [ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 22.779] Build Date: 30 May 2012 07:24:13PM
    [ 22.779]
    [ 22.779] Current version of pixman: 0.26.0
    [ 22.779] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
    [ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.106] (==) No Layout section. Using the first Screen section.
    [ 23.106] (==) No screen section available. Using defaults.
    [ 23.106] (**) |-->Screen "Default Screen Section" (0)
    [ 23.106] (**) | |-->Monitor "<default monitor>"
    [ 23.106] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 23.106] (**) | |-->Device "Device0"
    [ 23.106] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.106] (==) Automatically adding devices
    [ 23.106] (==) Automatically enabling devices
    [ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.219] Entry deleted from font path.
    [ 23.414] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.414] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.414] (II) Loader magic: 0x7c58e0
    [ 23.414] (II) Module ABI versions:
    [ 23.414] X.Org ANSI C Emulation: 0.4
    [ 23.414] X.Org Video Driver: 12.0
    [ 23.414] X.Org XInput driver : 16.0
    [ 23.414] X.Org Server Extension : 6.0
    [ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 23.415] (II) LoadModule: "extmod"
    [ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.487] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.487] compiled for 1.12.2, module version = 1.0.0
    [ 23.487] Module class: X.Org Server Extension
    [ 23.487] ABI class: X.Org Server Extension, version 6.0
    [ 23.487] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.487] (II) Loading extension XFree86-VidModeExtension
    [ 23.487] (II) Loading extension XFree86-DGA
    [ 23.487] (II) Loading extension DPMS
    [ 23.487] (II) Loading extension XVideo
    [ 23.487] (II) Loading extension XVideo-MotionCompensation
    [ 23.487] (II) Loading extension X-Resource
    [ 23.487] (II) LoadModule: "dbe"
    [ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.512] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.512] compiled for 1.12.2, module version = 1.0.0
    [ 23.512] Module class: X.Org Server Extension
    [ 23.512] ABI class: X.Org Server Extension, version 6.0
    [ 23.512] (II) Loading extension DOUBLE-BUFFER
    [ 23.512] (II) LoadModule: "glx"
    [ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
    [ 26.868] compiled for 4.0.2, module version = 1.0.0
    [ 26.868] Module class: X.Org Server Extension
    [ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 26.869] (II) Loading extension GLX
    [ 26.869] (II) LoadModule: "record"
    [ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 26.941] (II) Module record: vendor="X.Org Foundation"
    [ 26.941] compiled for 1.12.2, module version = 1.13.0
    [ 26.941] Module class: X.Org Server Extension
    [ 26.941] ABI class: X.Org Server Extension, version 6.0
    [ 26.941] (II) Loading extension RECORD
    [ 26.941] (II) LoadModule: "dri"
    [ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 27.011] (II) Module dri: vendor="X.Org Foundation"
    [ 27.011] compiled for 1.12.2, module version = 1.0.0
    [ 27.011] ABI class: X.Org Server Extension, version 6.0
    [ 27.011] (II) Loading extension XFree86-DRI
    [ 27.011] (II) LoadModule: "dri2"
    [ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 27.046] (II) Module dri2: vendor="X.Org Foundation"
    [ 27.047] compiled for 1.12.2, module version = 1.2.0
    [ 27.047] ABI class: X.Org Server Extension, version 6.0
    [ 27.047] (II) Loading extension DRI2
    [ 27.047] (II) LoadModule: "nvidia"
    [ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.306] compiled for 4.0.2, module version = 1.0.0
    [ 27.306] Module class: X.Org Video Driver
    [ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
    [ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 27.617] (++) using VT number 7
    [ 27.678] (II) Loading sub module "fb"
    [ 27.678] (II) LoadModule: "fb"
    [ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 27.870] (II) Module fb: vendor="X.Org Foundation"
    [ 27.870] compiled for 1.12.2, module version = 1.0.0
    [ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.870] (II) Loading sub module "wfb"
    [ 27.870] (II) LoadModule: "wfb"
    [ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.879] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.879] compiled for 1.12.2, module version = 1.0.0
    [ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.879] (II) Loading sub module "ramdac"
    [ 27.879] (II) LoadModule: "ramdac"
    [ 27.879] (II) Module "ramdac" already built-in
    [ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 27.934] (==) NVIDIA(0): RGB weight 888
    [ 27.934] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
    [ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
    [ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
    [ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
    [ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
    [ 30.789] (--) NVIDIA(0): clock
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
    [ 30.789] (--) NVIDIA(0): LVDS
    [ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
    [ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 30.836] (==) NVIDIA(0): will be used as the requested mode.
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (II) NVIDIA(0): Validated modes:
    [ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
    [ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
    [ 31.892] (--) NVIDIA(0): option
    [ 31.892] (--) Depth 24 pixmap format is 32 bpp
    [ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 34.862] (II) Loading extension NV-GLX
    [ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 37.299] (==) NVIDIA(0): Backing store disabled
    [ 37.299] (==) NVIDIA(0): Silken mouse enabled
    [ 37.300] (==) NVIDIA(0): DPMS enabled
    [ 37.300] (II) Loading extension NV-CONTROL
    [ 37.300] (II) Loading extension XINERAMA
    [ 37.300] (II) Loading sub module "dri2"
    [ 37.300] (II) LoadModule: "dri2"
    [ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 37.300] (II) Module dri2: vendor="X.Org Foundation"
    [ 37.300] compiled for 1.12.2, module version = 1.2.0
    [ 37.300] ABI class: X.Org Server Extension, version 6.0
    [ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
    [ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 37.301] (==) RandR enabled
    [ 37.301] (II) Initializing built-in extension Generic Event Extension
    [ 37.301] (II) Initializing built-in extension SHAPE
    [ 37.301] (II) Initializing built-in extension MIT-SHM
    [ 37.301] (II) Initializing built-in extension XInputExtension
    [ 37.301] (II) Initializing built-in extension XTEST
    [ 37.301] (II) Initializing built-in extension BIG-REQUESTS
    [ 37.301] (II) Initializing built-in extension SYNC
    [ 37.301] (II) Initializing built-in extension XKEYBOARD
    [ 37.301] (II) Initializing built-in extension XC-MISC
    [ 37.301] (II) Initializing built-in extension SECURITY
    [ 37.301] (II) Initializing built-in extension XINERAMA
    [ 37.301] (II) Initializing built-in extension XFIXES
    [ 37.301] (II) Initializing built-in extension RENDER
    [ 37.301] (II) Initializing built-in extension RANDR
    [ 37.301] (II) Initializing built-in extension COMPOSITE
    [ 37.301] (II) Initializing built-in extension DAMAGE
    [ 37.302] (II) Initializing extension GLX
    [ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.717] (II) LoadModule: "evdev"
    [ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 38.769] (II) Module evdev: vendor="X.Org Foundation"
    [ 38.769] compiled for 1.12.0, module version = 2.7.0
    [ 38.769] Module class: X.Org XInput Driver
    [ 38.769] ABI class: X.Org XInput driver, version 16.0
    [ 38.769] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.769] (**) Power Button: always reports core events
    [ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.769] (--) evdev: Power Button: Found keys
    [ 38.769] (II) evdev: Power Button: Configuring as keyboard
    [ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 38.769] (**) Option "xkb_rules" "evdev"
    [ 38.769] (**) Option "xkb_model" "evdev"
    [ 38.769] (**) Option "xkb_layout" "se"
    [ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
    [ 38.835] (**) Video Bus: always reports core events
    [ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 38.835] (--) evdev: Video Bus: Found keys
    [ 38.835] (II) evdev: Video Bus: Configuring as keyboard
    [ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 38.836] (**) Option "xkb_rules" "evdev"
    [ 38.836] (**) Option "xkb_model" "evdev"
    [ 38.836] (**) Option "xkb_layout" "se"
    [ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.837] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.837] (**) Power Button: always reports core events
    [ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.837] (--) evdev: Power Button: Found keys
    [ 38.837] (II) evdev: Power Button: Configuring as keyboard
    [ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 38.837] (**) Option "xkb_rules" "evdev"
    [ 38.837] (**) Option "xkb_model" "evdev"
    [ 38.837] (**) Option "xkb_layout" "se"
    [ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 38.838] (II) No input driver specified, ignoring this device.
    [ 38.838] (II) This device may have been added with another device file.
    [ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 38.838] (**) Sleep Button: always reports core events
    [ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 38.839] (--) evdev: Sleep Button: Found keys
    [ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
    [ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 38.839] (**) Option "xkb_rules" "evdev"
    [ 38.839] (**) Option "xkb_model" "evdev"
    [ 38.839] (**) Option "xkb_layout" "se"
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.842] (**) Logitech USB Receiver: always reports core events
    [ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 38.844] (II) No input driver specified, ignoring this device.
    [ 38.844] (II) This device may have been added with another device file.
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.844] (**) Logitech USB Receiver: always reports core events
    [ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found keys
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 38.845] (**) Option "xkb_rules" "evdev"
    [ 38.845] (**) Option "xkb_model" "evdev"
    [ 38.845] (**) Option "xkb_layout" "se"
    [ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 38.846] (**) USB 2.0 PC Camera: always reports core events
    [ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 38.846] (**) Option "xkb_rules" "evdev"
    [ 38.846] (**) Option "xkb_model" "evdev"
    [ 38.847] (**) Option "xkb_layout" "se"
    [ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
    [ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 38.848] (**) Option "xkb_rules" "evdev"
    [ 38.848] (**) Option "xkb_model" "evdev"
    [ 38.848] (**) Option "xkb_layout" "se"
    [ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 38.848] (II) LoadModule: "synaptics"
    [ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
    [ 38.911] compiled for 1.12.1, module version = 1.6.1
    [ 38.911] Module class: X.Org XInput Driver
    [ 38.911] ABI class: X.Org XInput driver, version 16.0
    [ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.911] (**) Option "Device" "/dev/input/event9"
    [ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 38.911] (**) Option "TapButton1" "1"
    [ 38.911] (**) Option "TapButton2" "2"
    [ 38.911] (**) Option "TapButton3" "3"
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    [ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    The /var/log/Xorg.0.log when using nv:
    [ 52.162]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 52.163] X Protocol Version 11, Revision 0
    [ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 52.165] Build Date: 30 May 2012 07:24:13PM
    [ 52.165]
    [ 52.165] Current version of pixman: 0.26.0
    [ 52.166] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
    [ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
    [ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 52.168] (==) No Layout section. Using the first Screen section.
    [ 52.168] (==) No screen section available. Using defaults.
    [ 52.168] (**) |-->Screen "Default Screen Section" (0)
    [ 52.168] (**) | |-->Monitor "<default monitor>"
    [ 52.168] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 52.168] (**) | |-->Device "Device0"
    [ 52.168] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 52.169] (==) Automatically adding devices
    [ 52.169] (==) Automatically enabling devices
    [ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 52.169] Entry deleted from font path.
    [ 52.169] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 52.169] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 52.169] (II) Loader magic: 0x7c58e0
    [ 52.169] (II) Module ABI versions:
    [ 52.169] X.Org ANSI C Emulation: 0.4
    [ 52.169] X.Org Video Driver: 12.0
    [ 52.169] X.Org XInput driver : 16.0
    [ 52.169] X.Org Server Extension : 6.0
    [ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 52.170] (II) LoadModule: "extmod"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 52.170] (II) Module extmod: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension MIT-SCREEN-SAVER
    [ 52.170] (II) Loading extension XFree86-VidModeExtension
    [ 52.170] (II) Loading extension XFree86-DGA
    [ 52.170] (II) Loading extension DPMS
    [ 52.170] (II) Loading extension XVideo
    [ 52.170] (II) Loading extension XVideo-MotionCompensation
    [ 52.170] (II) Loading extension X-Resource
    [ 52.170] (II) LoadModule: "dbe"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 52.170] (II) Module dbe: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension DOUBLE-BUFFER
    [ 52.170] (II) LoadModule: "glx"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
    [ 52.180] compiled for 4.0.2, module version = 1.0.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 52.180] (II) Loading extension GLX
    [ 52.180] (II) LoadModule: "record"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 52.180] (II) Module record: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.13.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension RECORD
    [ 52.180] (II) LoadModule: "dri"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 52.180] (II) Module dri: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.0.0
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension XFree86-DRI
    [ 52.180] (II) LoadModule: "dri2"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 52.181] (II) Module dri2: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.2, module version = 1.2.0
    [ 52.181] ABI class: X.Org Server Extension, version 6.0
    [ 52.181] (II) Loading extension DRI2
    [ 52.181] (II) LoadModule: "nv"
    [ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 52.181] (II) Module nv: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.0.901, module version = 2.1.18
    [ 52.181] Module class: X.Org Video Driver
    [ 52.181] ABI class: X.Org Video Driver, version 12.0
    [ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 52.183] (--) using VT number 7
    [ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
    [ 52.211] (II) Loading sub module "int10"
    [ 52.211] (II) LoadModule: "int10"
    [ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 52.233] (II) Module int10: vendor="X.Org Foundation"
    [ 52.233] compiled for 1.12.2, module version = 1.0.0
    [ 52.233] ABI class: X.Org Video Driver, version 12.0
    [ 52.233] (II) NV(0): Initializing int10
    [ 52.234] (II) NV(0): Bad V_BIOS checksum
    [ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
    [ 52.234] (--) NV(0): Console is VGA mode 0x105
    [ 52.234] (II) NV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
    [ 52.234] (==) NV(0): RGB weight 888
    [ 52.234] (==) NV(0): Default visual is TrueColor
    [ 52.235] (==) NV(0): Using hardware cursor
    [ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
    [ 52.245] (--) NV(0): Total video RAM: 512.0 MB
    [ 52.245] (--) NV(0): BAR1 size: 256.0 MB
    [ 52.245] (--) NV(0): Mapped memory: 256.0 MB
    [ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
    [ 52.317] (II) Loading sub module "i2c"
    [ 52.317] (II) LoadModule: "i2c"
    [ 52.317] (II) Module "i2c" already built-in
    [ 52.317] (II) Loading sub module "ddc"
    [ 52.317] (II) LoadModule: "ddc"
    [ 52.317] (II) Module "ddc" already built-in
    [ 52.317] (--) NV(0): Connector map:
    [ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
    [ 52.317] (--) NV(0): Bus 0 -> DAC1
    [ 52.317] (--) NV(0): Bus 8 -> SOR3
    [ 52.317] (--) NV(0): Load detection: 340
    [ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
    [ 52.317] (II) NV(0): Output VGA1 has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
    [ 52.317] (II) NV(0): Output DVI3 has no monitor section
    [ 52.317] (II) NV(0): LVDS native size 1366x768
    [ 52.317] (II) NV(0): Output LVDS has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
    [ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
    [ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
    [ 52.321] (II) NV(0): ... none found
    [ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
    [ 52.366] (II) NV(0): EDID for output VGA1
    [ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
    [ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
    [ 52.370] (II) NV(0): ... none found
    [ 52.370] (II) NV(0): EDID for output DVI3
    [ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
    [ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
    [ 52.422] (--) NV(0): DDC detected a DFP:
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID for output LVDS
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
    [ 52.422] (II) NV(0): Printing probed modes for output LVDS
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (II) NV(0): Output VGA1 disconnected
    [ 52.422] (II) NV(0): Output DVI3 disconnected
    [ 52.422] (II) NV(0): Output LVDS connected
    [ 52.422] (II) NV(0): Using exact sizes for initial modes
    [ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
    [ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
    [ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (==) NV(0): DPI set to (96, 96)
    [ 52.422] (II) Loading sub module "fb"
    [ 52.422] (II) LoadModule: "fb"
    [ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 52.447] (II) Module fb: vendor="X.Org Foundation"
    [ 52.447] compiled for 1.12.2, module version = 1.0.0
    [ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 52.447] (II) Loading sub module "xaa"
    [ 52.447] (II) LoadModule: "xaa"
    [ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
    [ 52.458] (II) Module xaa: vendor="X.Org Foundation"
    [ 52.458] compiled for 1.12.2, module version = 1.2.1
    [ 52.458] ABI class: X.Org Video Driver, version 12.0
    [ 52.458] (II) Loading sub module "ramdac"
    [ 52.458] (II) LoadModule: "ramdac"
    [ 52.458] (II) Module "ramdac" already built-in
    [ 52.458] (--) Depth 24 pixmap format is 32 bpp
    [ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
    [ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    [ 52.507] Screen to screen bit blits
    [ 52.507] Solid filled rectangles
    [ 52.507] 8x8 mono pattern filled rectangles
    [ 52.507] Indirect CPU to Screen color expansion
    [ 52.507] Solid Lines
    [ 52.507] Scanline Image Writes
    [ 52.508] Setting up tile and stipple cache:
    [ 52.508] 32 128x128 slots
    [ 52.508] 32 256x256 slots
    [ 52.508] 16 512x512 slots
    [ 52.508] (==) NV(0): Backing store disabled
    [ 52.508] (==) NV(0): Silken mouse enabled
    [ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 52.508] (==) NV(0): DPMS enabled
    [ 55.081] (--) RandR disabled
    [ 55.081] (II) Initializing built-in extension Generic Event Extension
    [ 55.081] (II) Initializing built-in extension SHAPE
    [ 55.081] (II) Initializing built-in extension MIT-SHM
    [ 55.081] (II) Initializing built-in extension XInputExtension
    [ 55.081] (II) Initializing built-in extension XTEST
    [ 55.081] (II) Initializing built-in extension BIG-REQUESTS
    [ 55.081] (II) Initializing built-in extension SYNC
    [ 55.081] (II) Initializing built-in extension XKEYBOARD
    [ 55.081] (II) Initializing built-in extension XC-MISC
    [ 55.081] (II) Initializing built-in extension SECURITY
    [ 55.081] (II) Initializing built-in extension XINERAMA
    [ 55.081] (II) Initializing built-in extension XFIXES
    [ 55.081] (II) Initializing built-in extension RENDER
    [ 55.081] (II) Initializing built-in extension RANDR
    [ 55.081] (II) Initializing built-in extension COMPOSITE
    [ 55.081] (II) Initializing built-in extension DAMAGE
    [ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    [ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
    [ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.715] (II) LoadModule: "evdev"
    [ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 55.725] (II) Module evdev: vendor="X.Org Foundation"
    [ 55.725] compiled for 1.12.0, module version = 2.7.0
    [ 55.725] Module class: X.Org XInput Driver
    [ 55.725] ABI class: X.Org XInput driver, version 16.0
    [ 55.725] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.725] (**) Power Button: always reports core events
    [ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.725] (--) evdev: Power Button: Found keys
    [ 55.725] (II) evdev: Power Button: Configuring as keyboard
    [ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 55.725] (**) Option "xkb_rules" "evdev"
    [ 55.725] (**) Option "xkb_model" "evdev"
    [ 55.725] (**) Option "xkb_layout" "se"
    [ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
    [ 55.918] (**) Video Bus: always reports core events
    [ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 55.918] (--) evdev: Video Bus: Found keys
    [ 55.918] (II) evdev: Video Bus: Configuring as keyboard
    [ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 55.918] (**) Option "xkb_rules" "evdev"
    [ 55.918] (**) Option "xkb_model" "evdev"
    [ 55.918] (**) Option "xkb_layout" "se"
    [ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.919] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.919] (**) Power Button: always reports core events
    [ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.919] (--) evdev: Power Button: Found keys
    [ 55.919] (II) evdev: Power Button: Configuring as keyboard
    [ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 55.919] (**) Option "xkb_rules" "evdev"
    [ 55.919] (**) Option "xkb_model" "evdev"
    [ 55.919] (**) Option "xkb_layout" "se"
    [ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 55.920] (II) No input driver specified, ignoring this device.
    [ 55.920] (II) This device may have been added with another device file.
    [ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 55.921] (**) Sleep Button: always reports core events
    [ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 55.921] (--) evdev: Sleep Button: Found keys
    [ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
    [ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 55.921] (**) Option "xkb_rules" "evdev"
    [ 55.921] (**) Option "xkb_model" "evdev"
    [ 55.921] (**) Option "xkb_layout" "se"
    [ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 55.922] (II) No input driver specified, ignoring this device.
    [ 55.922] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 55.924] (II) No input driver specified, ignoring this device.
    [ 55.924] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.924] (**) Logitech USB Receiver: always reports core events
    [ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 55.926] (II) No input driver specified, ignoring this device.
    [ 55.926] (II) This device may have been added with another device file.
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.927] (**) Logitech USB Receiver: always reports core events
    [ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found keys
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 55.927] (**) USB 2.0 PC Camera: always reports core events
    [ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
    [ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 55.929] (**) Option "xkb_rules" "evdev"
    [ 55.929] (**) Option "xkb_model" "evdev"
    [ 55.929] (**) Option "xkb_layout" "se"
    [ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 55.929] (II) LoadModule: "synaptics"
    [ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
    [ 55.967] compiled for 1.12.1, module version = 1.6.1
    [ 55.967] Module class: X.Org XInput Driver
    [ 55.967] ABI class: X.Org XInput driver, version 16.0
    [ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.967] (**) Option "Device" "/dev/input/event9"
    [ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 55.968] (**) Option "TapButton1" "1"
    [ 55.968] (**) Option "TapButton2" "2"
    [ 55.968] (**) Option "TapButton3" "3"
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 55.969] (II) No input driver specified, ignoring this device.
    [ 55.969] (II) This device may have been added with another device file.
    [ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 55.970] (II) No input driver specified, ignoring this device.
    [ 55.970] (II) This device may have been added with another device file.
    From what I can tell it is something with the nvidia driver that doesn't play well with xorg.  Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
    Last edited by Larsson (2012-06-13 18:59:43)

    Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or  NV-GLX that slows it down. Any suggestions on how I can speed this up?
    ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM.  But I don't think this is the problem?

  • Xorg.conf problems

    hi
    I have a working X-desktop with awesomeWM.
    problem is, my X only works without a xorg.conf, not with the Xorg -configure one or a minimalistic one.
    I have an intel 4500mhd graphic device, installed xf86-video-intel and evdev input devices.
    KMS, hal and dbus are all loaded and running.
    I need a working .conf file to set new font paths and I want to enable my hdmi output with xrandr.
    this is my xorg log file when I start X without a .conf:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.1.901 (1.7.2 RC 1)
    Release Date: 2009-11-6
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.31-ARCH x86_64
    Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
    Kernel command line: root=/dev/disk/by-uuid/7082b361-a170-49ad-b5b7-d4fb6ca55cba ro i915.modeset=1
    Build Date: 08 November 2009 04:08:18PM
    Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 10:22:11 2009
    (II) Loader magic: 0x7c1a00
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (--) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:2a43:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa400000/1048576
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default intel Device 0"
    Driver "intel"
    EndSection
    Section "Screen"
    Identifier "Builtin Default intel Screen 0"
    Device "Builtin Default intel Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default intel Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default intel Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default intel Device 0"
    (==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 2.9.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 00@00:02:0
    (WW) Falling back to old probe method for vesa
    (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    (--) intel(0): Chipset: "GM45"
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output DVI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): Output DVI2 has no monitor section
    (II) intel(0): Output DP2 has no monitor section
    (II) intel(0): Output DP3 has no monitor section
    (II) intel(0): Output TV1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output DVI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Output DVI2 disconnected
    (II) intel(0): Output DP2 disconnected
    (II) intel(0): Output DP3 disconnected
    (II) intel(0): Output TV1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1366x768
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    record: RECORD extension enabled at configure time.
    record: This extension is known to be broken, disabling extension now..
    record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 361 x 203
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 2.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) Synaptics touchpad driver version 1.2.0
    (**) Option "Device" "/dev/input/event10"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device WebCam SCB-0340N
    (**) WebCam SCB-0340N: always reports core events
    (**) WebCam SCB-0340N: Device: "/dev/input/event9"
    (II) WebCam SCB-0340N: Found keys
    (II) WebCam SCB-0340N: Configuring as keyboard
    (II) XINPUT: Adding extended input device "WebCam SCB-0340N" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Sleep Button
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event7"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event6"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event2"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "synaptics"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) WebCam SCB-0340N: Close
    (II) UnloadModule: "evdev"
    (II) Sleep Button: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"

    thank you for putting so much effort into my problem
    I now tried this .conf file:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri2"
    Load "dri"
    Load "record"
    Load "glx"
    Load "extmod"
    Load "dbe"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "VGA1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    Option "dpms"
    EndSection
    Section "Monitor"
    Identifier "LVDS1"
    VendorName "Something"
    ModelName "LaptopLCD"
    Option "dpms"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    # VendorName "Intel Corporation"
    # BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    # BusID "PCI:0:2:0"
    Option "Monitor-LVDS" "LVDS1"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "LVDS1"
    SubSection "Display"
    ViewPort 0 0
    Depth 24
    EndSubSection
    EndSection
    and this is my new log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.1.901 (1.7.2 RC 1)
    Release Date: 2009-11-6
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.31-ARCH x86_64
    Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
    Kernel command line: root=/dev/disk/by-uuid/7082b361-a170-49ad-b5b7-d4fb6ca55cba ro i915.modeset=1
    Build Date: 08 November 2009 04:08:18PM
    Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 19 06:53:16 2009
    (++) Using config file: "/root/xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "LVDS1"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x7c1a00
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (--) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:2a43:144d:c063 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfa400000/1048576
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 2.9.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    (II) Primary Device is: PCI 00@00:02:0
    (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    (--) intel(0): Chipset: "GM45"
    (II) intel(0): Output VGA1 using monitor section VGA1
    (II) intel(0): Output LVDS1 using monitor section LVDS1
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output DVI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): Output DVI2 has no monitor section
    (II) intel(0): Output DP2 has no monitor section
    (II) intel(0): Output DP3 has no monitor section
    (II) intel(0): Output TV1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output DVI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Output DVI2 disconnected
    (II) intel(0): Output DP2 disconnected
    (II) intel(0): Output DP3 disconnected
    (II) intel(0): Output TV1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1366x768
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: DRI2 Enabled
    (WW) intel(0): Option "Monitor-LVDS" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    record: RECORD extension enabled at configure time.
    record: This extension is known to be broken, disabling extension now..
    record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 361 x 203
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 2.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) Synaptics touchpad driver version 1.2.0
    (**) Option "Device" "/dev/input/event10"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device WebCam SCB-0340N
    (**) WebCam SCB-0340N: always reports core events
    (**) WebCam SCB-0340N: Device: "/dev/input/event9"
    (II) WebCam SCB-0340N: Found keys
    (II) WebCam SCB-0340N: Configuring as keyboard
    (II) XINPUT: Adding extended input device "WebCam SCB-0340N" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Sleep Button
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event7"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event6"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event2"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (II) AIGLX: Suspending AIGLX clients for VT switch
    edit: I just tested the VGA out with no .conf and it works, even with the correct display ratio (4:3 rather than 16:9 on my book). Tomorrow I will perhaps test the hdmi port on a friends new TV. If all works, I honestly don't care about messing around with xorg.conf ..
    The font path problem is only relevant to urxvt so I will stick with xterm where extra fonts work without problem.
    Last edited by lustikus (2009-11-19 10:36:06)

  • Trying to install vmware-player but it wants Xorg-server

    Can I build vmware with the Xfree package, or do I need to upgrade to Xorg?
    Is the Xorg process smooth now?
       Thanks.

    Okay, my bad....  :oops:
    I have xorg - R6.8.2-6
    vmware-player wants xorg-server.
    When I try to install the server, I get a message about ttf-bitstream-vera being needed and then xorg being a conflict. Should I upgrade xorg first, then get the new vmware version in a few days?
    What is the ttf_bitstream-vera problem that it conflicts with xorg? IIRC this package had problems when I installed from the CD the first time.
       Thanks.

  • Screen flashes black when launching video apps

    Hi everyone,
    I need some help getting a diagnostic of a problem I have.
    I am using: xorg+catalyst+openbox
    When I launch a video (with mplayer or vlc for example) or when a guest OS is booted in virtualbox, the screen flashes and becomes black for half a second before coming back again.
    So far, this has led to no crashes or anything really unpleasant, but it would be nice to fix it if possible.
    Here is my xorg.conf in case it could be useful. http://pastebin.com/m2137bab7
    It was generated via hwd and aticonfig
    I would appreciate any help you could give me.
    Thanks a lot for your time
    Vincent

    I am not keying out green, but I have the same exact problem. I am also using ProPresenter for most of the service elements (lyrics, video, etc) but I switch to Keynote so I have more creative control of sermon notes. I have the same graphic up in both programs and would like to seamlessly switch between the two. However, the "black flash" is a huge problem and distraction. I've noticed the same thing does not occur in Windows programs I have used in the past (say going from PowerPoint to SongShow Plus).
    Is there a fix??!

  • Xorg update brakes Eclipse

    After upgrading today to the latest version of xorg-server and xorg-init Eclipse failed to load.
    I troubleshooted the problem to be xorg-server-1.4.0.90-4-i686.pkg.tar.gz and xorg-xinit-1.0.7-3-i686.pkg.tar.gz. once I reverted to xorg-server-1.4.0.90-3-i686.pkg.tar.gz and xorg-xinit-1.0.7-2-i686.pkg.tar.gz things went back to "normal".
    I'm posting just in case someone "out there" is wondering why Eclipse is not working today ...

    I decided, until the issue with these packages is resolved, not to install either of them.
    In my /etc/pacman.conf I added the following line IgnorePkg = xorg-server xorg-init, however when I do a pacman -Syu this is what happens:
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    warning: xorg-server: ignoring package upgrade (1.4.0.90-3 => 1.4.0.90-4)
    resolving dependencies...
    looking for inter-conflicts...
    Targets: xorg-xinit-1.0.7-3
    Total Download Size: 0.00 MB
    Total Installed Size: 0.01 MB
    ???! am I missing something?
    R.

  • Xorg crash after carriage return [SOLVED]

    When I login everything works until I give a carriage return somewhere, like emacs, shell,...
    Then Xorg crashes and brings me back to gdm.
    Any solutions for this problem? I'm using an nvidia graphics card.
    Last edited by return new int[5] (2010-10-03 19:38:39)

    Gnome/Xorg crashes randomly when the enter key is pressed
    If you find Gnome, GDM and Xorg crashing randomly when you press the enter key, you are probably experienceing this bug: [1]
    As a work arround, edit /etc/rc.conf and move Gdm to the end of the DAEMONS list
    e.g. Run this command in terminal:
    sudo vi /etc/rc.conf
    Edit the last line of the file so it looks something like:
    DAEMONS=([...] gdm)
    from this page :  http://wiki.archlinux.org/index.php/GNOME

Maybe you are looking for