Xorg defaults to wrong resolution[SOLVED]

Hey All,
I just reinstalled Arch after a 6 month hiatus, and I'm having a bit of trouble with my Xorg.conf.
I have a 1440x900 resolution laptop, but X starts at 1024x768. I have a Nvidia Geforce go 6150. I'm using the Nvidia driver. Here are the pertinent parts of xorg.conf:
I feel like I don't need 90% of this crap. I added the first ModeLine entry myself, the rest were autogenerated. I don't really know what those strings of numbers are, I just stole them from another post.
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
ModeLine "1440X900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
I added the 1440x900 parts by hand.
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Am I just not entering these options with the right syntax or something?
Edit:
And here's my log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux Hal 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 8 20:19:00 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:5:0) nVidia Corporation C51 [Geforce 6150 Go] rev 162, Mem @ 0xb2000000/0, 0xc0000000/0, 0xb1000000/0, BIOS @ 0x????????/131072
(--) PCI: (0@0:10:3) nVidia Corporation MCP51 PMU rev 163, Mem @ 0xb0040000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:05:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 6150 (C51) at PCI:0:5:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.51.28.53.15
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 6150 at PCI:0:5:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (70, 84); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "true"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) USB Mouse: Device: "/dev/input/mice"
(**) USB Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) USB Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) USB Mouse: ZAxisMapping: buttons 4 and 5
(**) USB Mouse: Buttons: 9
(**) USB Mouse: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (USB Mouse)
(II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
(II) USB Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed
Last edited by Joe_Arch (2009-03-08 23:47:32)

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
Default depth is 24, but the Depth 24 section doesn't include 1440x900
Bob

Similar Messages

  • My mail send defaults to wrong mail server. How do I change it?

    My mail send defaults to wrong mail server. How do I change it?

    That was a long time ago. I don't even remember asking the question. I don't have that trouble at the moment.

  • Mac mini displays the wrong resolution

    Hi everybody.
    My Mac mini recently began starting up in the wrong resolution (1024x768, instead of the usual 1280x1024.) From my experience with older, 680x0 Macs, I reset the PRAM. This fixed the problem, but I find that I have to do it every time I restart the computer.
    Is there a battery inside the mini that needs to be replaced?
    Thanks.
    Intel mini (1.5GHz Core Solo)   Mac OS X (10.4.9)  

    Mr E,
    Try using the Finder to search for files with the name 'windowserver' (no quotes of course. You should find 2 or 3, including one with a string of additional alphanumeic characters. Move all three to the trash and then reboot.
    These are the files that control screen properties, and the system will recreate new ones in the absence of the originals. Startup may produce an erroneous resolution if your screen is not tightly connected and thus not properly recognized, but if so, aside from checking the connections are firm and tight as suggested, you should then be able to set the required resolution and have the system retain it correctly.

  • I am stuck on the wrong resolution and have tried everything. Please help.

    My Mac Mini is stuck on the wrong resolution, and I have tried resetting my Mac's PRAM, I tried booting into safe mode, and I tried resetting the SMC, but none fixed the problem.

    Never mind. I should've done this before, but I had to get the Apple Support people to call me. Since none of the other ways to fix the resolution worked. I just had to get to Displays in System Preferences by using the keyboard, and then I had to change the settings using the keyboard as well.

  • My web page uses svg images, but when the svg's are printed by Firefox they are rasterized at the wrong resolution.

    I have produced a web page which uses svg images. One of these is here:
    http://donwagner.dk/JZSS5.4.svg.
    The svg's are produced by Adobe Illustrator, version CS5. Viewed in any browser the images look good at any magnification, but when I print the page in Firefox the image is seriously blurred, seemingly because the rasterization uses the wrong resolution.
    The same happens in all browsers, not quite so bad in Chrome but still not perfect.
    Do you have plans to fix this bug, or do you have a workaround?
    Regards
    Don Wagner

    In my experience, print quality settings such as dpi/ppi are hidden in your printer driver settings and not directly available through Firefox's UI. In the print dialog, if you click the Properties button, you hopefully will gain access to this setting. Obviously native web resolution (96ppi) can give disappointing results, so hopefully you can find a place to increase it.

  • [Sony Vaio TZ] Xorg mapping wrong resolution

    I recently bought a Sony Vaio TZ - awesome piece of equipment - but noticed my actual Xorg resolution was higher than what the specs said (by 2 pixels). This is kinda annoying...
    Xrandr output before I use xrandr to set the correct resolution:
    [root@hermes stijn]# xrandr
    Screen 0: minimum 1024 x 768, current 1368 x 768, maximum 1368 x 768
    default connected 1368x768+0+0 (normal left inverted right) 0mm x 0mm
    1366x768 60.0
    1360x768 60.0
    1024x768 60.0
    1368x768 60.0*
    As you can see it says it detects 1368x768 as maximum resolution but lists the correct resolution (1366x768) as a possibility too.  My first reaction was to generate a modeline that would make Xorg behave, but that does not have the desired effect (it returns a 1368x768 line!):
    [root@hermes stijn]# gtf 1366 768 60
    # 1368x766 @ 60.00 Hz (GTF) hsync: 47.58 kHz; pclk: 85.64 MHz
    Modeline "1368x766_60.00" 85.64 1368 1440 1584 1800 766 767 770 793 -HSync +Vsync
    I have tried setting a Modes line in xorg.conf like this:
    Modes "1366x768"
    but that gives me the following message in Xorg's log:
    (II) I810(0): Not using mode "1366x768" (no mode of this name)
    Adding a 'Virtual' line with the correct dimensions like this:
    Virtual 1366 768
    doesn't do the trick either.
    Grepping Xorg's log for both X sizes returns the following:
    [root@hermes stijn]# egrep "1366|1368" /var/log/Xorg.0.log
    (II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1366,768)
    (II) I810(0): Size of device LFP (local flat panel) is 1366 x 768
    (II) I810(0): Lowest common panel size for pipe B is 1366 x 768
    (II) I810(0): PanelID returned panel resolution : 1366x768
    Mode: 60 (1366x768)
    XResolution: 1366
    Mode: 61 (1366x768)
    XResolution: 1366
    *Mode: 62 (1366x768)
    XResolution: 1366
    (II) I810(0): Not using mode "1366x768" (no mode of this name)
    (II) I810(0): Correcting stride (1368 -> 5504)
    (**) I810(0): Virtual size is 1368x768 (pitch 2048)
    (II) I810(0): [drm] init sarea width,height = 1368 x 768 (pitch 2048)
    Why the heck does the i810 map to this resolution? Xorg recognises the 1366x766 correctly no? Is there a way to make Xorg use 1366x766 without having to resort to xrandr? For what it's worth, I had this issue also with the vesa driver.
    Last edited by B (2008-03-31 03:20:54)

    Ok. I went with xmodmap because xbindkeys basically does the same, only requiring you to install an extra package .
    I mapped the eject button to eject too (surprisingly, as I didn't know at first the slim drive had a button, I thought the whole thing was pressure sensitive...). I mapped the AV button to a fullscreen instance of VLC .
    I fixed all Fn keys except for the zoom key (don't know how to map that to e.g. Opera's zoom functionality yet) and the external VGA connector which I should still write a script for.
    Anyways, here's my handler.sh patch:
    --- handler.sh.old 2008-04-04 22:59:23.000000000 +0200
    +++ handler.sh 2008-04-04 22:59:12.000000000 +0200
    @@ -7,6 +7,7 @@
    minspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq`
    maxspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq`
    setspeed="/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed"
    +presbright=`cat /sys/class/backlight/sony/brightness`
    set $*
    @@ -18,29 +19,34 @@
    *) logger "ACPI action undefined: $2" ;;
    esac
    +
    button/sleep)
    case "$2" in
    SLPB) echo -n mem >/sys/power/state ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    +
    ac_adapter)
    case "$2" in
    - AC)
    + ACAD)
    case "$4" in
    00000000)
    echo -n $minspeed >$setspeed
    #/etc/laptop-mode/laptop-mode start
    + echo 2 > /sys/class/backlight/sony/brightness
    00000001)
    echo -n $maxspeed >$setspeed
    #/etc/laptop-mode/laptop-mode stop
    + echo 6 > /sys/class/backlight/sony/brightness
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    +
    battery)
    case "$2" in
    BAT0)
    @@ -60,6 +66,32 @@
    button/lid)
    #echo "LID switched!">/dev/tty5
    +
    + sony/hotkey)
    + case "$2" in
    + SPIC)
    + case "$4" in
    + 0000000c)
    + [ -e /var/run/daemons/bluetooth ] && /etc/rc.d/bluetooth stop || /etc/rc.d/bluetooth start
    + ;;
    + 00000010)
    + echo $(( ${presbright}-1 )) > /sys/class/backlight/sony/brightness
    + ;;
    + 00000011)
    + echo $(( ${presbright}+1 )) > /sys/class/backlight/sony/brightness
    + ;;
    + 00000017)
    + /usr/sbin/pm-suspend
    + ;;
    + 0000001b)
    + eject -r
    + ;;
    + esac
    + ;;
    + *) logger "ACPI action undefined: $2" ;;
    + esac
    + ;;
    +
    logger "ACPI group/action undefined: $1 / $2"
    Xmodmap gives names to the Fn volume keys and the multimedia keys, and they are bound to the related actions through my Openbox rc.xml.

  • [Solved]which application exec xorg default screensaver (black screen)

    Hi，guys！
    I want to  exce cron in 45 minutes with xorg's default screensaver application  to prompt me to take a water for relaxtion.:(
    But I don't know xorg's default screensaver application,and I hope to change the default  saver time for a  long time!
    thank you!f
    Last edited by 57lvii (2010-04-23 12:59:00)

    man -k screensaver
    XActivateScreenSaver (3) - manipulate the screen saver
    XForceScreenSaver (3) - manipulate the screen saver
    XGetScreenSaver (3) - manipulate the screen saver
    XResetScreenSaver (3) - manipulate the screen saver
    XScreenSaver (3) [XScreenSaverSelectInput] - X11 Screen Saver extension client library
    XScreenSaverAllocInfo (3) - X11 Screen Saver extension client library
    XScreenSaverGetRegistered (3) - X11 Screen Saver extension client library
    XScreenSaverQueryExtension (3) - X11 Screen Saver extension client library
    XScreenSaverQueryInfo (3) - X11 Screen Saver extension client library
    XScreenSaverQueryVersion (3) - X11 Screen Saver extension client library
    XScreenSaverRegister (3) - X11 Screen Saver extension client library
    XScreenSaverSelectInput (3) - X11 Screen Saver extension client library
    XScreenSaverSetAttributes (3) - X11 Screen Saver extension client library
    XScreenSaverSuspend (3) - X11 Screen Saver extension client library
    XScreenSaverUnregister (3) - X11 Screen Saver extension client library
    XScreenSaverUnsetAttributes (3) - X11 Screen Saver extension client library
    XSetScreenSaver (3) - manipulate the screen saver
    But they all can't execute !
    does anybody know which application control the xorg's default screensaver !!
    thanks !!

  • Unable to get 1920x1080 resolution [Solved]

    I am trying out a Philips 24" LCD monitor, capable of 1920x1080 at 60Hz. My graphics card is an nVidia FX-5600DT and I am using the nvidia-173xx driver. At present I can only get 1280x1024.
    Here is my xrandr output:
    Screen 0: minimum 320 x 240, current 1280 x 1024, maximum 1280 x 1024
    default connected 1280x1024+0+0 0mm x 0mm
    1280x1024 50.0*
    1280x960 51.0
    1024x768 52.0
    896x672 53.0
    800x600 54.0 55.0
    640x512 56.0
    640x480 57.0 58.0
    512x384 59.0
    400x300 60.0
    320x240 61.0
    Here is my xorg.conf file where I have attempted to force 1920x1080:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder75) Sun Nov 8 21:50:38 PST 2009
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "glx"
    Load "dbe"
    Load "dri2"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    HorizSync 30 - 83
    VertRefresh 56 - 75
    Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118
    Option "PreferredMode" "1920x1080_60.00"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "NV31 [GeForce FX 5600]"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    And here is my Xorg.0.log output:
    Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 10 12:11:30 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 10de:0312:147b:8f19 nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xde000000/16777216, 0xe0000000/268435456, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 173.14.22 Sun Nov 8 21:42:44 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 173.14.22 Sun Nov 8 20:43:40 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules/libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 (NV31) at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.31.20.38.00
    (II) NVIDIA(0): Detected AGP rate: 8X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
    (--) NVIDIA(0): Philips 244E (DFP-0)
    (--) NVIDIA(0): Philips 244E (DFP-0): 140.4 MHz maximum pixel clock
    (--) NVIDIA(0): Philips 244E (DFP-0): Internal Dual Link TMDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (WW) NVIDIA(0): No valid modes for "1920x1080"; removing.
    (WW) NVIDIA(0):
    (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
    (WW) NVIDIA(0): "nvidia-auto-select".
    (WW) NVIDIA(0):
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "nvidia-auto-select"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (62, 89); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
    (II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
    (II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
    (II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
    (II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (==) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (WW) NVIDIA(0): Option "PreferredMode" is not used
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event5"
    (II) Logitech USB Receiver: Found 12 mouse buttons
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Found relative axes
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found absolute axes
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as mouse
    (II) Logitech USB Receiver: Configuring as keyboard
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech USB Receiver: (accel) acceleration profile 0
    (II) Logitech USB Receiver: initialized for relative axes.
    (WW) Logitech USB Receiver: ignoring absolute axes.
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event4"
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    Note "(WW) NVIDIA(0): No valid modes for "1920x1080"; removing." from the log. How do I somehow ensure a valid mode? Any other ideas appreciated.
    Larry
    Last edited by lagagnon (2010-02-11 00:00:30)

    Maybe under "Screen" put a virtual resolution, like:
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024"
    Virtual 1920 1080
    Sorry if you tried this already or isn't what you want. I just remember having this issue on a desktop I used to have (although I no longer have it), and had nVidia graphics that for some reason wouldn't allow the resolution I wanted so I plugged in Virtual and it worked. Probably not the most elegant ways to achieve it but it worked for me and I didn't see any problems. Anyway, worth a try.

  • Paragraph styles all default to wrong character style

    So I set up a template and based all my character styles on my basic body copy. However, every new text box I create it defaults to the "character styles" to my section header color and sizing. I have to right click and "clear character styles" every single time. I've never had this happen before and cannot figure out how to fix it, it is such a PAIN!

    From your explanation, I suspect your use of Character Styles might need to be redirected to Paragraph Styles. But that is conjecture, so I apologize if I'm wrong. In any case, to solve your problem; with nothing selected, choose No Character Style in the Character Styles panel. That sets the default for new frames.

  • Xorg disables keyboard and mice [solved]

    after last update I cant use the trackpoint and keyboard on my IBM T40 under x, only the touchpad works.
    here is my xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "MinSpeed" "0.09"
    Option "MaxSpeed" "0.18"
    Option "BottomEdge" "4200"
    Option "SHMConfig" "on"
    Option "FingerLow" "25"
    Option "LeftEdge" "1700"
    Option "MaxTapMove" "220"
    Option "MaxTapTime" "180"
    Option "FingerHigh" "30"
    Option "VertScrollDelta" "100"
    Option "TopEdge" "1700"
    Option "AccelFactor" "0.0015"
    Option "RightEdge" "5300"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5, 35.15, 35.5
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    #Section "Device"
    # Identifier "Standard VGA"
    # VendorName "Unknown"
    # BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    ## Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    #EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** ATI Radeon (generic) [radeon]"
    Driver "radeon"
    Option "DynamicClocks" "on"
    Option "AGPMode" "4"
    Option "RenderAccel" "on"
    Option "EnablePageFlip" "on"
    Option "BIOSHotkeys" "on"
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** ATI Radeon (generic) [radeon]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "SynapticsMouse1" "AlwaysCore"
    EndSection
    # Section "DRI"
    # InputDevice "SynapticsMouse1" "AlwaysCore"
    # Mode 0666
    # EndSection
    and the Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux t40 2.6.28-ARCH #1 SMP PREEMPT Tue Jan 6 10:26:22 UTC 2009 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 12 13:04:51 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "My Monitor"
    (**) | |-->Device "** ATI Radeon (generic) [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) |-->Input Device "SynapticsMouse1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/0, 0xc0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 6.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon RV730 (AGP),
    ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
    ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3430, ATI FireMV 2450, ATI FireMV 2260,
    ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000c0100000
    (II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "AGPMode" "4"
    (**) RADEON(0): Option "EnablePageFlip" "on"
    (**) RADEON(0): Option "RenderAccel" "on"
    (**) RADEON(0): Option "DynamicClocks" "on"
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (**) RADEON(0): Page Flipping enabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Detected total video RAM=32768K, accessible=65536K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2048x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 12000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 18300, sclk: 183.000000, mclk: 260.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=35000; xclk=18300
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): DFP table revision: 2
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: 1024x768
    (II) RADEON(0): Panel Size from BIOS: 1024x768
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1024, YRes: 768, DotClock: 65000
    HBlank: 320, HOverPlus: 16, HSyncWidth: 136
    VBlank: 38, VOverPlus: 2, VSyncWidth: 6
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J
    (II) RADEON(0): Port0:
    Monitor -- AUTO
    Connector -- VGA
    DAC Type -- Primary
    TMDS Type -- None
    DDC Type -- 0x60
    (II) RADEON(0): Port1:
    Monitor -- AUTO
    Connector -- DVI-D
    DAC Type -- None
    TMDS Type -- Internal
    DDC Type -- 0x64
    (II) RADEON(0): Port2:
    Monitor -- AUTO
    Connector -- LVDS
    DAC Type -- None
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): Port3:
    Monitor -- AUTO
    Connector -- STV
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 3
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1024x768
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1536
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Enabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x04000000
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 8 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 5 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
    (II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
    (II) RADEON(0): Largest offscreen area available: 1024 x 7165
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x800000
    (II) RADEON(0): Will use depth buffer at offset 0xc00000
    (II) RADEON(0): Will use 16384 kb for textures at offset 0x1000000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (**) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4c57]
    (II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xd0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb5856000
    (II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb803d000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb5656000
    (II) RADEON(0): [agp] GART texture map handle = 0xd0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb5176000
    (II) RADEON(0): [drm] register handle = 0xc0100000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0x1fff0000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 11
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
    (II) RADEON(0): Largest offscreen area available: 1024 x 7157
    (II) RADEON(0): Detected Radeon Mobility M7, disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    restore common
    restore crtc1
    restore pll1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) RADEON(0): Option "BIOSHotkeys" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 270 x 203
    (II) Synaptics touchpad driver version 0.99.3
    (--) SynapticsMouse1 auto-dev sets device to /dev/input/event8
    (**) Option "Device" "/dev/input/event8"
    (II) SynapticsMouse1: x-axis range 1472 - 5472
    (II) SynapticsMouse1: y-axis range 1408 - 4448
    (II) SynapticsMouse1: pressure range 0 - 255
    (II) SynapticsMouse1: finger width range 0 - 0
    (II) SynapticsMouse1: buttons: left right middle double triple
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "VertScrollDelta" "100"
    (--) SynapticsMouse1 touchpad found
    (**) Option "AlwaysCore"
    (**) SynapticsMouse1: always reports core events
    (II) evaluating device (SynapticsMouse1)
    (II) XINPUT: Adding extended input device "SynapticsMouse1" (type: TOUCHPAD)
    (--) SynapticsMouse1 touchpad found
    (II) RADEON(0): Damage tracking initialized for page flipping
    (EE) config/hal: couldn't initialise context: (null) ((null))
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) UnloadModule: "synaptics"
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
    finished PLL2
    Entering Restore TV
    Restore TV PLL
    Restore TVHV
    Restore TV Restarts
    Restore Timing Tables
    Restore TV standard
    Leaving Restore TV
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8046000 at 0xb803e000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by eg4matze (2009-01-12 12:47:16)

    hal couldnt start, I rebuild it with abs, now everything works

  • KDE: Xorg 1.8 and synaptics [SOLVED]

    Hi,
    It appears that the synaptiks package from AUR works just fine with the default /etc/X11/xorg.conf.d/10-synaptics.conf.
    I just had to check System Settings->Keyboard & Mouse->Touchpad->Touchpad Configuration->Scrolling boxes in order to get my scrolling capabilities back.

    So, added that near the top after ServerLayout
    now it hangs with flashing cursor though I get different info
    warning this server has a video ABI version of 7.0 that this driver does not officially support.etc. etc. etc.
    Use the -ignorABI option to override this check.
    failed to load module nvidia
    fatal server error
    no screen found
    Can you think of what I've done wrong?
    i'm running latest everything though not 'testing' repo.
    maybe put the 'ServerFlags" near the bottom?
    Last edited by yvonney (2010-04-18 00:51:47)

  • Xorg.conf nVidia ION resolution

    Sorry for my English.
    I have this board: ASUS AT5IONT-I, Atom D525, ION2, PCI-E 4X, 2xDDR3 SODIMM, Gbit LAN,E-sata, USB3.0, DVI, HDMI, Fanless, Heatpipe, Mini-ITX.
    And, trying to make HTPC.
    I install Arch with openbox, but the problem is with video resolution.
    I use my 32PFL9606H Philips TV 32''.
    I set proper 1920x1080 resolution is xorg.conf but "xdpyinfo | grep dimensions" reports: "dimensions:    1280x800 pixels (338x211 millimeters)"
    here is my xorg.conf:
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 275.09.07 ([email protected]) Wed Jun 8 16:05:05 PDT 2011
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 275.09.07 ([email protected]) Wed Jun 8 16:05:17 PDT 2011
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Philips FTV"
    HorizSync 50.0 - 60.0
    VertRefresh 50.0
    Option "ExactModeTimingsDVI" "true"
    Option "UseEDID" "false"
    Option "DPMS"
    Option "ModeDebug" "true"
    ModeLine "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "ION"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    SubSection "Display"
    Modes "1920x1080@50p"
    Depth 24
    EndSubSection
    EndSection
    PS: I deleted /var/log/Xorg.0.log file, but after reboot it is not recreated. Why? And remember that it said something like:
    "[   185.106] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [   185.106] (==) NVIDIA(0):     will be used as the requested mode.
    although I was set mode to 1920x1080
    Last edited by clovenhoof (2011-07-02 09:30:37)

    Hi !
    Please don't use xorg.conf, edit the files inside /etc/X11/xorg.conf.d/ instead.
    I also have an ION board and have working HDMI connection with audio at 1920x1080 using the below configuration. Remove your xorg.conf and then edit these files:
    /etc/X11/xorg.conf.d/10-monitor.conf
    Section "Monitor"
    Identifier "Monitor0"
    Option "ExactModeTimingsDVI" "True"
    HorizSync 14-70
    VertRefresh 48-62
    Modeline "1920x1080-TV" 148.35 1920 2008 2152 2300 1080 1084 1089 1125
    Option "DPMS"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Monitor "Monitor0"
    Device "Default nvidia Device"
    SubSection "Display"
    Depth 24
    Modes "1920x1080-TV"
    EndSubSection
    EndSection
    /etc/X11/xorg.conf.d/20-nvidia.conf
    Section "Device"
    Identifier "Default nvidia Device"
    Driver "nvidia"
    Option "NoLogo" "True"
    Option "ModeValidation" "NoEdidModes"
    Option "UseEdidDpi" "False"
    Option "DPI" "100 x 100"
    EndSection
    Please note that the above Modeline works on my TV (a 22'' low cost brand one) but I cannot guarantee it will work on yours.
    Try that first, then if it doesn't work, try to generate one using the cvt command, and replace the Modeline:
    cvt 1920 1080
    it should output something like this:
    # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
    Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
    If this method doesn't work either, try the method explained here (which is the one I've first used to find the right Modeline). Its tricky method, and requires a bit of work and lot of patience ... just don't give up
    Finally, a little bonus . To have working HDMI sound, I have to put these lines in /etc/asound.conf:
    /etc/asound.conf
    pcm.!default {
    type hw
    card 0
    device 3
    Again, you may need to change the device index in your case. You can list alsa devices using aplay -l command:
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
    Subdevices: 2/2
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 0/1
    Subdevice #0: subdevice #0

  • 9100M resolution [solved]

    I just got an Acer Aspire 4530, it comes with the NVidia 9100M G. Resolution defaults to 1024x768. I had to manually add the Modeline and Modes options for 1280x800. For some reason, X defaults to 1024x768 instead, but if I remove all Modelines except for the one I want, then 1280x800 is used. Is there any better way to set the default to be 1280x800?
    Here's my Xorg.conf.
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
    # Auto-generated by Archie mkxcfg
    # Auto-generated by Archie mkxcfg
    #Section "DRI"
    # Mode 0666
    #EndSection
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    # Load "type1"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Monitor0"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1280x800_60.00" 83.46 1280 1344 1480 1680 800 801 804 828 -hSync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    EndSection
    Section "Device"
    #Driver "nvidia"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "NoLogo" "True"
    Option "RenderAccel" "True"
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x800" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    [edit]
    It's 1280x800, not 1024x800. :doh:
    Last edited by B-Con (2008-12-22 06:17:56)

    With an older integrated nvidia ~6150, using the proprietary driver, with a short xorg.conf (take the one generated by X -configure) I put something like:
    sudo nvidia-settings -l
    in my xinitrc. I'm pretty sure that changed my resolution. Of course you then need to have the apropriate NOPASSWD: in /etc/sudoers.
    Another option would be to look into xrandr, (xrandr --auto), though I'm not so sure that it will work with your current driver.

  • Nvidia-Settings skips needed resolution [SOLVED]

    I've been messing with xorg.conf for a long time now, since my first days back on Ubuntu. It is something I hate, but something I've learned how to manipulate pretty well. For some reason, 1360x768 is completely skipped over in "modes" in the Nvidia X Server Settings. It is declared in the "mode" list in the xorg.conf, and as the virtual screen. Xorg.conf:
    http://pastebin.com/rtVEyn69
    I'm not entirely sure why it is being skipped. I am currently stuck at 1024x768. Emerald also doesn't work, but this is not something that concerns me, just an added detail.
    Last edited by Thomas Bates (2010-12-01 05:01:39)

    Here's what I see in Xorg.0.log:
    Line 131 says that nvidia is not reading the EDID of your monitor.
    Line 148 sets the virtual screen size to 1024 x 768
    So... the EDID is information in the monitor that says "Hi my name is Mr. Monitor and I like this list of resolutions and I have this refresh rate and I enjoy long walk on beaches."  Either that monitor does not have EDID information or else the driver is having problems reading it for some reason.  It really doesn't matter and isn't something all that uncommon especially if it is an older monitor.  So then Nvidia says "If you aren't going to tell me anything, I'll just have to guess."  And promptly proceeds to guess wrong.  This is the part about the virtual screen size - you can't have a resolution bigger than the virtual screen size.  So if it is guessing that the screen is 1024x768 and setting the virtual screen size at that, that is the highest you can do.  No matter how much you beg and plead in your Screen Section of xorg.conf, saying "Come on and give me some lovin'.  I want a bigger resolution, please.  With sugar and a cherry on top."... no matter how much you plead, it will look at that virtual screen size and say, "Sorry. I don't know of anything that big, but I'll tell you what - I'll give you as big as I can think I can go, instead.  My virtual size is 1024x768, so thats the best I can give you."  And so, like an ever-faithful puppy, X gives you the best it has to offer.  And unlike that puppy, X does not poop on the floor afterwards.
    So that is how the story goes.  The moral of the story is that we need to tell X and Nvidia that your screen can do better than Nvidia is guessing it can.  And since your monitor does not have the EDID to tell it this, we must tell it this.  This is done through the use of Modelines.  Basically, you go online and find a Modeline calculator... such as http://www.arachnoid.com/modelines/    ...then you tell the calculator what resolution and refresh rate you want to add.  If X is correctly guessing most of your resolutions, you don't need modelines for them; you just need the modelines for the resolutions you want to add in.   Then you put the modeline that is generated into your Xorg.conf, under the Monitor section... you can see an example of this on that website down below where it goes into detail on what a modeline is.
    Hopefully once the modeline is in place, when X starts up it will see the modeline and say "Here's a piece of info on my monitor... i think i will use it."   It then will check that modeline against the horizontal and vertical refresh rates that you specified in your xorg.conf (HorizSync and VertRefresh) to make sure that you aren't trying to trick it into doing something the monitor is incapable of.  If it passes the test, then that resolution is added to the pool of resolutions for the monitor, and then the virtual screen size is set to the largest resolution in that pool (which you made the modeline for) and everything is peachy.

  • Nouveau driver gives very low screen resolution [SOLVED]

    Hello.
    I have a 1680x1050 monitor. I have just switched from nvidia to nouveau drivers.
    At boot time (I have disabled the old framebuffer setting in grub's menu.lst) after a while I have a beautiful very high resolution console.
    The problem is, I have very low resolutions in X.
    [user@pc ~]$ xrandr
    Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192
    DVI-I-1 connected 640x480+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
    640x480 60.0*
    720x400 70.1
    VGA-1 disconnected (normal left inverted right x axis y axis)
    I have this /etc/X11.xorg.conf file
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nouveau"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    # Keyboard layouts
    Option "XkbLayout" "us, el"
    Option "XkbVariant" ",qwerty"
    Option "XkbOptions" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
    EndSection
    This is /var/log/Xorg.0.log
    [ 284.975]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 284.975]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 284.975] X Protocol Version 11, Revision 0
    [ 284.975] Build Operating System: Linux 3.0.0-ARCH x86_64
    [ 284.975] Current Operating System: Linux gandalf 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
    [ 284.975] Kernel command line: root=/dev/sda1 ro
    [ 284.975] Build Date: 08 August 2011 08:24:13AM
    [ 284.975]
    [ 284.975] Current version of pixman: 0.22.2
    [ 284.975] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 284.975] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 284.975] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 25 19:11:02 2011
    [ 284.975] (==) Using config file: "/etc/X11/xorg.conf"
    [ 284.975] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 284.975] (==) ServerLayout "Layout0"
    [ 284.975] (**) |-->Screen "Screen0" (0)
    [ 284.975] (**) | |-->Monitor "Monitor0"
    [ 284.976] (**) | |-->Device "Device0"
    [ 284.976] (**) |-->Input Device "Keyboard0"
    [ 284.976] (**) |-->Input Device "Mouse0"
    [ 284.976] (==) Automatically adding devices
    [ 284.976] (==) Automatically enabling devices
    [ 284.976] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 284.976] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 284.976] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 284.976] (WW) Disabling Keyboard0
    [ 284.976] (WW) Disabling Mouse0
    [ 284.976] (II) Loader magic: 0x7d3620
    [ 284.976] (II) Module ABI versions:
    [ 284.976] X.Org ANSI C Emulation: 0.4
    [ 284.976] X.Org Video Driver: 10.0
    [ 284.976] X.Org XInput driver : 12.2
    [ 284.976] X.Org Server Extension : 5.0
    [ 284.977] (--) PCI: (0:2:0:0) 10de:0849:1849:0849 rev 162, Mem @ 0xf9000000/16777216, 0xc8000000/134217728, 0xc6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
    [ 284.977] (--) PCI:*(0:3:0:0) 10de:0421:10b0:1401 rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
    [ 284.977] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 284.977] (II) LoadModule: "extmod"
    [ 284.977] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 284.977] (II) Module extmod: vendor="X.Org Foundation"
    [ 284.977] compiled for 1.10.3.901, module version = 1.0.0
    [ 284.977] Module class: X.Org Server Extension
    [ 284.977] ABI class: X.Org Server Extension, version 5.0
    [ 284.977] (II) Loading extension MIT-SCREEN-SAVER
    [ 284.977] (II) Loading extension XFree86-VidModeExtension
    [ 284.977] (II) Loading extension XFree86-DGA
    [ 284.978] (II) Loading extension DPMS
    [ 284.978] (II) Loading extension XVideo
    [ 284.978] (II) Loading extension XVideo-MotionCompensation
    [ 284.978] (II) Loading extension X-Resource
    [ 284.978] (II) LoadModule: "dbe"
    [ 284.978] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 284.978] (II) Module dbe: vendor="X.Org Foundation"
    [ 284.978] compiled for 1.10.3.901, module version = 1.0.0
    [ 284.978] Module class: X.Org Server Extension
    [ 284.978] ABI class: X.Org Server Extension, version 5.0
    [ 284.978] (II) Loading extension DOUBLE-BUFFER
    [ 284.978] (II) LoadModule: "glx"
    [ 284.978] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 284.978] (II) Module glx: vendor="X.Org Foundation"
    [ 284.978] compiled for 1.10.3.901, module version = 1.0.0
    [ 284.978] ABI class: X.Org Server Extension, version 5.0
    [ 284.978] (==) AIGLX enabled
    [ 284.978] (II) Loading extension GLX
    [ 284.978] (II) LoadModule: "record"
    [ 284.978] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 284.978] (II) Module record: vendor="X.Org Foundation"
    [ 284.978] compiled for 1.10.3.901, module version = 1.13.0
    [ 284.978] Module class: X.Org Server Extension
    [ 284.978] ABI class: X.Org Server Extension, version 5.0
    [ 284.978] (II) Loading extension RECORD
    [ 284.978] (II) LoadModule: "dri"
    [ 284.978] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 284.979] (II) Module dri: vendor="X.Org Foundation"
    [ 284.979] compiled for 1.10.3.901, module version = 1.0.0
    [ 284.979] ABI class: X.Org Server Extension, version 5.0
    [ 284.979] (II) Loading extension XFree86-DRI
    [ 284.979] (II) LoadModule: "dri2"
    [ 284.979] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 284.979] (II) Module dri2: vendor="X.Org Foundation"
    [ 284.979] compiled for 1.10.3.901, module version = 1.2.0
    [ 284.979] ABI class: X.Org Server Extension, version 5.0
    [ 284.979] (II) Loading extension DRI2
    [ 284.979] (II) LoadModule: "nouveau"
    [ 284.979] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 284.979] (II) Module nouveau: vendor="X.Org Foundation"
    [ 284.979] compiled for 1.10.3, module version = 0.0.16
    [ 284.979] Module class: X.Org Video Driver
    [ 284.979] ABI class: X.Org Video Driver, version 10.0
    [ 284.979] (II) NOUVEAU driver
    [ 284.979] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 284.979] RIVA TNT (NV04)
    [ 284.979] RIVA TNT2 (NV05)
    [ 284.979] GeForce 256 (NV10)
    [ 284.979] GeForce 2 (NV11, NV15)
    [ 284.979] GeForce 4MX (NV17, NV18)
    [ 284.979] GeForce 3 (NV20)
    [ 284.979] GeForce 4Ti (NV25, NV28)
    [ 284.979] GeForce FX (NV3x)
    [ 284.979] GeForce 6 (NV4x)
    [ 284.979] GeForce 7 (G7x)
    [ 284.979] GeForce 8 (G8x)
    [ 284.979] GeForce GTX 200 (NVA0)
    [ 284.979] GeForce GTX 400 (NVC0)
    [ 284.979] (++) using VT number 7
    [ 284.982] drmOpenDevice: node name is /dev/dri/card0
    [ 284.982] drmOpenDevice: open result is 7, (OK)
    [ 284.982] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
    [ 284.982] drmOpenDevice: node name is /dev/dri/card0
    [ 284.982] drmOpenDevice: open result is 7, (OK)
    [ 284.982] drmOpenByBusid: drmOpenMinor returns 7
    [ 284.982] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
    [ 284.982] (II) [drm] nouveau interface version: 0.0.16
    [ 284.982] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 284.982] (II) Loading sub module "dri"
    [ 284.982] (II) LoadModule: "dri"
    [ 284.982] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 284.982] (II) Module dri: vendor="X.Org Foundation"
    [ 284.982] compiled for 1.10.3.901, module version = 1.0.0
    [ 284.982] ABI class: X.Org Server Extension, version 5.0
    [ 284.982] (II) NOUVEAU(0): Loaded DRI module
    [ 284.982] drmOpenDevice: node name is /dev/dri/card0
    [ 284.982] drmOpenDevice: open result is 8, (OK)
    [ 284.982] drmOpenDevice: node name is /dev/dri/card0
    [ 284.982] drmOpenDevice: open result is 8, (OK)
    [ 284.982] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
    [ 284.982] drmOpenDevice: node name is /dev/dri/card0
    [ 284.982] drmOpenDevice: open result is 8, (OK)
    [ 284.982] drmOpenByBusid: drmOpenMinor returns 8
    [ 284.982] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
    [ 284.982] (II) [drm] DRM interface version 1.4
    [ 284.982] (II) [drm] DRM open master succeeded.
    [ 284.982] (--) NOUVEAU(0): Chipset: "NVIDIA NV86"
    [ 284.982] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 284.982] (==) NOUVEAU(0): RGB weight 888
    [ 284.982] (==) NOUVEAU(0): Default visual is TrueColor
    [ 284.983] (==) NOUVEAU(0): Using HW cursor
    [ 284.983] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 284.983] (==) NOUVEAU(0): Page flipping enabled
    [ 285.087] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
    [ 285.184] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 285.288] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 285.288] (II) NOUVEAU(0): Manufacturer: GSM Model: 566f Serial#: 351988
    [ 285.288] (II) NOUVEAU(0): Year: 2008 Week: 4
    [ 285.288] (II) NOUVEAU(0): EDID Version: 1.3
    [ 285.288] (II) NOUVEAU(0): Digital Display Input
    [ 285.288] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 49 vert.: 32
    [ 285.288] (II) NOUVEAU(0): Gamma: 2.20
    [ 285.288] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 285.288] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 285.288] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 285.288] (II) NOUVEAU(0): redX: 0.653 redY: 0.341 greenX: 0.231 greenY: 0.666
    [ 285.288] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.062 whiteX: 0.313 whiteY: 0.329
    [ 285.288] (II) NOUVEAU(0): Supported established timings:
    [ 285.288] (II) NOUVEAU(0): 720x400@70Hz
    [ 285.288] (II) NOUVEAU(0): 640x480@60Hz
    [ 285.288] (II) NOUVEAU(0): 640x480@75Hz
    [ 285.288] (II) NOUVEAU(0): 800x600@56Hz
    [ 285.288] (II) NOUVEAU(0): 800x600@60Hz
    [ 285.288] (II) NOUVEAU(0): 800x600@75Hz
    [ 285.288] (II) NOUVEAU(0): 832x624@75Hz
    [ 285.288] (II) NOUVEAU(0): 1024x768@60Hz
    [ 285.288] (II) NOUVEAU(0): 1024x768@75Hz
    [ 285.288] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 285.288] (II) NOUVEAU(0): 1152x864@75Hz
    [ 285.288] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 285.288] (II) NOUVEAU(0): Supported standard timings:
    [ 285.288] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 285.288] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 285.288] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 285.288] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 285.288] (II) NOUVEAU(0): Supported detailed timing:
    [ 285.288] (II) NOUVEAU(0): clock: 119.0 MHz Image Size: 474 x 296 mm
    [ 285.288] (II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 285.288] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 285.288] (II) NOUVEAU(0): Supported detailed timing:
    [ 285.288] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 474 x 296 mm
    [ 285.288] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
    [ 285.288] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 285.289] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
    [ 285.289] (II) NOUVEAU(0): Monitor name: L227W
    [ 285.289] (II) NOUVEAU(0): EDID (in hex):
    [ 285.289] (II) NOUVEAU(0): 00ffffffffffff001e6d6f56f45e0500
    [ 285.289] (II) NOUVEAU(0): 04120103ea312078ea56b5a7573baa26
    [ 285.289] (II) NOUVEAU(0): 0f5054a76b80950081808140714f0101
    [ 285.289] (II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
    [ 285.289] (II) NOUVEAU(0): 3600da281100001a21399030621a2740
    [ 285.289] (II) NOUVEAU(0): 68b03600da281100001c000000fd0038
    [ 285.289] (II) NOUVEAU(0): 4b1e530f000a202020202020000000fc
    [ 285.289] (II) NOUVEAU(0): 004c323237570a202020202020200063
    [ 285.289] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 285.289] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 285.289] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 285.289] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 285.289] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1680x1050" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1680x1050" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1280x1024" (vrefresh out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1280x1024" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1440x900" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1280x960" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1152x864" (vrefresh out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1024x768" (vrefresh out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "1024x768" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "832x624" (vrefresh out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "800x600" (vrefresh out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "800x600" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "800x600" (hsync out of range)
    [ 285.289] (II) NOUVEAU(0): Not using mode "640x480" (vrefresh out of range)
    [ 285.289] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 285.289] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 285.289] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 285.386] (II) NOUVEAU(0): EDID for output VGA-1
    [ 285.386] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 285.386] (II) NOUVEAU(0): Output VGA-1 disconnected
    [ 285.386] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
    [ 285.386] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 640x480
    [ 285.386] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 285.386] (--) NOUVEAU(0): Virtual size is 640x480 (pitch 0)
    [ 285.386] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 285.386] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 285.386] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 285.386] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 285.387] (**) NOUVEAU(0): Display dimensions: (490, 320) mm
    [ 285.387] (**) NOUVEAU(0): DPI set to (33, 38)
    [ 285.387] (II) Loading sub module "fb"
    [ 285.387] (II) LoadModule: "fb"
    [ 285.387] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 285.387] (II) Module fb: vendor="X.Org Foundation"
    [ 285.387] compiled for 1.10.3.901, module version = 1.0.0
    [ 285.387] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 285.387] (II) Loading sub module "exa"
    [ 285.387] (II) LoadModule: "exa"
    [ 285.387] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 285.387] (II) Module exa: vendor="X.Org Foundation"
    [ 285.387] compiled for 1.10.3.901, module version = 2.5.0
    [ 285.387] ABI class: X.Org Video Driver, version 10.0
    [ 285.387] (II) Loading sub module "shadowfb"
    [ 285.387] (II) LoadModule: "shadowfb"
    [ 285.387] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 285.387] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 285.387] compiled for 1.10.3.901, module version = 1.0.0
    [ 285.387] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 285.387] (--) Depth 24 pixmap format is 32 bpp
    [ 285.391] (II) NOUVEAU(0): Opened GPU channel 2
    [ 285.391] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 285.391] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 285.391] (II) NOUVEAU(0): GART: 512MiB available
    [ 285.393] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
    [ 285.393] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 285.393] (II) EXA(0): Driver registered support for the following operations:
    [ 285.393] (II) Solid
    [ 285.393] (II) Copy
    [ 285.393] (II) Composite (RENDER acceleration)
    [ 285.393] (II) UploadToScreen
    [ 285.393] (II) DownloadFromScreen
    [ 285.393] (==) NOUVEAU(0): Backing store disabled
    [ 285.393] (==) NOUVEAU(0): Silken mouse enabled
    [ 285.393] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 285.393] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 285.393] (**) NOUVEAU(0): DPMS enabled
    [ 285.393] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 285.393] (--) RandR disabled
    [ 285.393] (II) Initializing built-in extension Generic Event Extension
    [ 285.393] (II) Initializing built-in extension SHAPE
    [ 285.393] (II) Initializing built-in extension MIT-SHM
    [ 285.393] (II) Initializing built-in extension XInputExtension
    [ 285.393] (II) Initializing built-in extension XTEST
    [ 285.393] (II) Initializing built-in extension BIG-REQUESTS
    [ 285.393] (II) Initializing built-in extension SYNC
    [ 285.393] (II) Initializing built-in extension XKEYBOARD
    [ 285.393] (II) Initializing built-in extension XC-MISC
    [ 285.393] (II) Initializing built-in extension SECURITY
    [ 285.394] (II) Initializing built-in extension XINERAMA
    [ 285.394] (II) Initializing built-in extension XFIXES
    [ 285.394] (II) Initializing built-in extension RENDER
    [ 285.394] (II) Initializing built-in extension RANDR
    [ 285.394] (II) Initializing built-in extension COMPOSITE
    [ 285.394] (II) Initializing built-in extension DAMAGE
    [ 285.407] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 285.407] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 285.407] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 285.407] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 285.407] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 285.407] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
    [ 285.407] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 285.408] (II) NOUVEAU(0): NVEnterVT is called.
    [ 285.437] (II) NOUVEAU(0): Setting screen physical size to 169 x 127
    [ 285.437] resize called 640 480
    [ 285.563] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 285.563] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 285.563] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 285.563] (II) LoadModule: "evdev"
    [ 285.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.564] (II) Module evdev: vendor="X.Org Foundation"
    [ 285.564] compiled for 1.10.0, module version = 2.6.0
    [ 285.564] Module class: X.Org XInput Driver
    [ 285.564] ABI class: X.Org XInput driver, version 12.2
    [ 285.564] (II) Using input driver 'evdev' for 'Power Button'
    [ 285.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.564] (**) Power Button: always reports core events
    [ 285.564] (**) Power Button: Device: "/dev/input/event1"
    [ 285.564] (--) Power Button: Found keys
    [ 285.564] (II) Power Button: Configuring as keyboard
    [ 285.564] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 285.564] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 285.564] (**) Option "xkb_rules" "evdev"
    [ 285.564] (**) Option "xkb_model" "evdev"
    [ 285.564] (**) Option "xkb_layout" "us, el"
    [ 285.564] (**) Option "xkb_variant" ",qwerty"
    [ 285.564] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
    [ 285.590] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
    [ 285.590] (EE) XKB: Failed to load keymap. Loading default keymap instead.
    [ 285.622] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 285.622] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 285.622] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 285.622] (II) Using input driver 'evdev' for 'Video Bus'
    [ 285.622] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.622] (**) Video Bus: always reports core events
    [ 285.622] (**) Video Bus: Device: "/dev/input/event2"
    [ 285.622] (--) Video Bus: Found keys
    [ 285.622] (II) Video Bus: Configuring as keyboard
    [ 285.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input2/event2"
    [ 285.622] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 285.622] (**) Option "xkb_rules" "evdev"
    [ 285.622] (**) Option "xkb_model" "evdev"
    [ 285.622] (**) Option "xkb_layout" "us, el"
    [ 285.622] (**) Option "xkb_variant" ",qwerty"
    [ 285.622] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
    [ 285.623] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 285.623] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 285.623] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 285.623] (II) Using input driver 'evdev' for 'Power Button'
    [ 285.623] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.623] (**) Power Button: always reports core events
    [ 285.623] (**) Power Button: Device: "/dev/input/event0"
    [ 285.623] (--) Power Button: Found keys
    [ 285.623] (II) Power Button: Configuring as keyboard
    [ 285.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 285.623] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 285.623] (**) Option "xkb_rules" "evdev"
    [ 285.623] (**) Option "xkb_model" "evdev"
    [ 285.623] (**) Option "xkb_layout" "us, el"
    [ 285.623] (**) Option "xkb_variant" ",qwerty"
    [ 285.623] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
    [ 285.626] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
    [ 285.626] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 285.626] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 285.626] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 285.626] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.626] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 285.626] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
    [ 285.626] (--) Microsoft Wired Keyboard 600: Found keys
    [ 285.626] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 285.626] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input4/event4"
    [ 285.626] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 285.626] (**) Option "xkb_rules" "evdev"
    [ 285.626] (**) Option "xkb_model" "evdev"
    [ 285.626] (**) Option "xkb_layout" "us, el"
    [ 285.626] (**) Option "xkb_variant" ",qwerty"
    [ 285.626] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
    [ 285.627] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event5)
    [ 285.627] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 285.627] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 285.627] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 285.627] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.627] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 285.627] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event5"
    [ 285.627] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
    [ 285.627] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
    [ 285.627] (--) Microsoft Wired Keyboard 600: Found relative axes
    [ 285.627] (--) Microsoft Wired Keyboard 600: Found absolute axes
    [ 285.627] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
    [ 285.627] (--) Microsoft Wired Keyboard 600: Found keys
    [ 285.627] (II) Microsoft Wired Keyboard 600: Configuring as mouse
    [ 285.627] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 285.627] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
    [ 285.627] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
    [ 285.627] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 285.627] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input5/event5"
    [ 285.627] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 285.627] (**) Option "xkb_rules" "evdev"
    [ 285.627] (**) Option "xkb_model" "evdev"
    [ 285.627] (**) Option "xkb_layout" "us, el"
    [ 285.627] (**) Option "xkb_variant" ",qwerty"
    [ 285.627] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
    [ 285.627] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
    [ 285.627] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
    [ 285.627] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
    [ 285.628] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
    [ 285.628] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
    [ 285.628] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
    [ 285.628] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
    [ 285.628] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
    [ 285.628] (II) No input driver/identifier specified (ignoring)
    [ 285.629] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/event6)
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
    [ 285.629] (II) Using input driver 'evdev' for 'Microsoft Microsoft Basic Optical Mouse v2.0 '
    [ 285.629] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : always reports core events
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event6"
    [ 285.629] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
    [ 285.629] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
    [ 285.629] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found relative axes
    [ 285.629] (--) Microsoft Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
    [ 285.629] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
    [ 285.629] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 285.629] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input6/event6"
    [ 285.629] (II) XINPUT: Adding extended input device "Microsoft Microsoft Basic Optical Mouse v2.0 " (type: MOUSE)
    [ 285.629] (II) Microsoft Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
    [ 285.629] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
    [ 285.629] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/mouse0)
    [ 285.629] (II) No input driver/identifier specified (ignoring)
    [ 285.636] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 285.636] (II) No input driver/identifier specified (ignoring)
    [ 285.753] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 285.753] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 285.753] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 285.753] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 285.753] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 285.753] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 291.096] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 291.096] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 418.665] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 418.665] (II) NOUVEAU(0): NVEnterVT is called.
    [ 418.794] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 418.794] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 418.794] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 418.794] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 418.794] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 418.794] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 423.560] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 423.560] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 423.560] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 423.560] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 423.560] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 423.560] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 423.762] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 423.762] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 423.762] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 423.762] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 423.762] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 423.762] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 423.984] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 423.984] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 423.984] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 423.984] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 423.984] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 423.984] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 428.608] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 428.608] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 428.608] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 428.608] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 428.608] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 428.608] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 438.386] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 438.386] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 2748.085] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 2748.085] (II) NOUVEAU(0): NVEnterVT is called.
    [ 2748.217] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 2748.217] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 2748.217] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 2748.217] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 2748.217] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 2748.217] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 2750.536] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22127
    [ 2750.536] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 2750.536] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 2750.536] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 2750.536] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 2750.536] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    Last edited by vega (2011-08-25 17:09:12)

    keyboard and mouse are now auto-detected. Do you have xf86-input-evdev installed? If so, you do not need to explicitly set the drivers for keyboard and mouse in xorg.conf. You can try it out if you like.

Maybe you are looking for