Xorg.conf nVidia ION resolution

Sorry for my English.
I have this board: ASUS AT5IONT-I, Atom D525, ION2, PCI-E 4X, 2xDDR3 SODIMM, Gbit LAN,E-sata, USB3.0, DVI, HDMI, Fanless, Heatpipe, Mini-ITX.
And, trying to make HTPC.
I install Arch with openbox, but the problem is with video resolution.
I use my 32PFL9606H Philips TV 32''.
I set proper 1920x1080 resolution is xorg.conf but "xdpyinfo | grep dimensions" reports: "dimensions:    1280x800 pixels (338x211 millimeters)"
here is my xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 275.09.07 ([email protected]) Wed Jun 8 16:05:05 PDT 2011
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 275.09.07 ([email protected]) Wed Jun 8 16:05:17 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Philips FTV"
HorizSync 50.0 - 60.0
VertRefresh 50.0
Option "ExactModeTimingsDVI" "true"
Option "UseEDID" "false"
Option "DPMS"
Option "ModeDebug" "true"
ModeLine "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "ION"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Modes "1920x1080@50p"
Depth 24
EndSubSection
EndSection
PS: I deleted /var/log/Xorg.0.log file, but after reboot it is not recreated. Why? And remember that it said something like:
"[   185.106] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   185.106] (==) NVIDIA(0):     will be used as the requested mode.
although I was set mode to 1920x1080
Last edited by clovenhoof (2011-07-02 09:30:37)

Hi !
Please don't use xorg.conf, edit the files inside /etc/X11/xorg.conf.d/ instead.
I also have an ION board and have working HDMI connection with audio at 1920x1080 using the below configuration. Remove your xorg.conf and then edit these files:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
Option "ExactModeTimingsDVI" "True"
HorizSync 14-70
VertRefresh 48-62
Modeline "1920x1080-TV" 148.35 1920 2008 2152 2300 1080 1084 1089 1125
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Monitor0"
Device "Default nvidia Device"
SubSection "Display"
Depth 24
Modes "1920x1080-TV"
EndSubSection
EndSection
/etc/X11/xorg.conf.d/20-nvidia.conf
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
Option "NoLogo" "True"
Option "ModeValidation" "NoEdidModes"
Option "UseEdidDpi" "False"
Option "DPI" "100 x 100"
EndSection
Please note that the above Modeline works on my TV (a 22'' low cost brand one) but I cannot guarantee it will work on yours.
Try that first, then if it doesn't work, try to generate one using the cvt command, and replace the Modeline:
cvt 1920 1080
it should output something like this:
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
If this method doesn't work either, try the method explained here (which is the one I've first used to find the right Modeline). Its tricky method, and requires a bit of work and lot of patience ... just don't give up
Finally, a little bonus . To have working HDMI sound, I have to put these lines in /etc/asound.conf:
/etc/asound.conf
pcm.!default {
type hw
card 0
device 3
Again, you may need to change the device index in your case. You can list alsa devices using aplay -l command:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0

Similar Messages

  • Setting up Bumblebee - xorg.conf and /etc/bumblebee/xorg.conf.nvidia

    I have installed Bumblebee and the Nvidia drivers on my Asus N53SV laptop. I am able to run programs such as glxspheres using Optirun. However, I am not sure what to do next if I want to render my desktop using my discrete video card (GT540M) instead of through ordinary Intel graphics.
    Should I copy the file /etc/bumblebee/xorg.conf.nvidia to /etc/X11/xorg.conf?
    Thanks for your help,
    - mark

    I don't see why you would do that. The point of bumblebee is to avoid using the nvidia card unless you start the program with 'optirun'. If you want to render your desktop and use the nvidia card all the time, just don't use bumblebee and directly use the nvidia driver.
    If you really really want to use bumblebee, I guess you could set your login manager to use a xinitrc method, and put optirun in front of the command that launch your desktop.

  • Xorg.conf , nvidia 96xx and dual head failure

    i cant get Xorg to work with nvidia driver at all.
    here is where i am.
    setup aurch linux [X]
    setup xserver with NV driver 1 head[X]
    setup dual head[]
    ok so i cant even get nvidia drivers to work or dual head on the NV driver.
    i dont have an xorg.conf setup but i have tried the xorg.conf from my fedora setup but it just black screened.
    here is my error log.
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux mypc 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
    Build Date: 18 July 2009 03:49:37PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 24 03:43:51 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    (**) | |-->Device "Device0"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0xb40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 10de:0622:1462:1270 nVidia Corporation G94 [GeForce 9600 GT] rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000d800/128, BIOS @ 0x????????/524288
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 96.43.11 Mon Feb 23 16:13:29 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:54:58 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
    (EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
    (EE) NVIDIA(0): additional information.
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    (EE) NVIDIA(0): *** Aborting ***
    (II) UnloadModule: "nvidia"
    (II) UnloadModule: "fb"
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    Ive tried everything i could think of or what arch wiki could. I came to aurch linux to learn more about linux (fedora holds your hand to much.) but i dont think i can figure this one out on my own.

    serverman,
    let me see if I understand your situation.
    You are using the nvidia drivers and want to setup a dual screen with independent screens (?).
    Without a xorg.conf one screen should work out of the box with one screen.
    For the proprietary drivers you will need a minimal xorg.conf:
    Section "Device"
    Identifier "Configured Video Device"
    Driver "nvidia"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "Configured Video Device"
    DefaultDepth 24
    EndSection
    This still has only one screen, but can you try it and tell what happens ?
    Mektub

  • 5-screen (multi-monitor) nVidia xorg.conf -- my setup

    Hi. I would like to share my xorg.conf, since it took forever to get right.
    There isn't a lot of information out there for folks using > 2 monitors, or several graphics cards, or esoteric setups including rotation etc. I hope this will be useful; I wouldn't mind contributing to the wiki if anybody thinks it might be useful.
    So first up: hardware. I have
    nVidia GeForce GTX 550 Ti connected to a 24" monitor (in the middle)
    nVidia GeForce 210 connected to two 19" monitors, rotated into portrait (on either side of the 24")
    nVidia GeForce GT 440 connected to two 15" monitors (above the 24")
    here is a picture of the monitors, click for a bigger version
    Drivers: I'm using the official nVidia drivers, I couldn't get nouveau to work. Since I am using Xinerama, the XRandR extension isn't loaded -- therefore my setup won't be suitable for people whose screen configuration changes dynamically. But I'd prefer not to use Xinerama, and even to use nouveau if possible; if anybody has a similar configuration working with nouveau, please share
    Finally, the actual config itself. Here it is on pastebin.
    Rotation
    The correct way to rotate monitors in xorg.conf is through the metamodes option of the Screen section. On my Screen 2 and 4 (the two 19" monitors), you can see that
    { Rotation = left }
    has been added at the end of the metamodes option. Contrary to some other guides floating around, it is not necessary to specify these options:
    # Unnecessary
    Option "RandRRotate" "on"
    Option "Rotate" "right"
    I believe these come from an earlier version of Xorg. They don't have any effect when I put them in my xorg.conf, using Xorg 1.12.4 and nVidia 304.43.
    Even when I specified rotate in metamodes, my monitors didn't appear to rotate because I had originally written
    Option "metamodes" "CRT-1: nvidia-auto-select +0+0 { Rotation = left} "
    instead of
    Option "metamodes" "DFP-1: nvidia-auto-select +0+0 { Rotation = left} "
    This just made rotation fail silently, with no error message. Make sure to specify DFP if you're using a digital output (DVI, HDMI, DP) and CRT only if you're using a VGA output on your graphics board.
    Tips
    When you're testing out a new Xorg.conf, you can use
    startx -- :1
    to start a new X server without killing the current one. See if your configuration works, then switch back to your original X server by pressing Cmd-Alt-F7.
    You should also keep a log of different configurations you have tried. You can use a version control system like git to track changes to your Xorg.conf; make sure you document every change you have made, and why, it can prove invaluable later on.
    Feel free to ask about this setup. I would like to know something: what is the function of the Screen option in the Device section? On the four Device entries for my nVidia 210 and 440 cards, there is an option called Screen; when I take it out, the setup breaks. Why are they there? And why do they not map to the screen numbers in the Screen section? (They are numbered 0, 0, 1, 1 rather than 1, 2, 3, 4)

    Thank you for the reply. I read the wiki page, but unfortunately I am still struggling with my two nvidia gpu, three monitor setup.
    The red arrows show the pointer progression through the monitors (moving mouse left to right). When the cursor is on the top monitor, it becomes an X, and the screen is black.
    Here is the matching xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 331.67 (buildmeister@swio-display-x86-rhel47-08) Fri Apr 4 12:26:05 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "Acer X223W"
    HorizSync 31.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 610"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "VGA-0: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +1920+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "nvidia-auto-select +0+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Based on this post on archlinux, I took a crack at matching the xorg.conf pattern above (monitor/device/screen sections) with my own. I took it as a victory that it actually didn't error (many xorg.conf experiments have in the last couple of days have). Here is my new xorg.conf with 3 screens/3 monitors/3 devices:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.67 (buildmeister@swio-display-x86-rhel47-08) Fri Apr 4 12:26:16 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "leftAcer"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "rightAcer"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "topAcer"
    VendorName "Unknown"
    ModelName "Acer X223W"
    HorizSync 31.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "geforce-9600-gt-0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "geforce-9600-gt-1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Device"
    Identifier "geforce-gt-610"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 610"
    BusID "PCI:2:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "geforce-9600-gt-0"
    Monitor "leftAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "MetaModes" "DFP: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "geforce-9600-gt-1"
    Monitor "rightAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-1"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-1"
    Option "MetaModes" "DFP-1: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "geforce-gt-610"
    Monitor "topAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection
    This what appears with the new xorg.conf:
    "leftAcer" and "rightAcer" appear, but nothing appears on "topAcer" (it appears not to be getting a signal from the gpu). I can move the mouse pointer between "leftAcer" and "rightAcer".
    Any help or advice would be greatly appreciated. Here are a few details about the hardware setup:
    GeForce 9600 GT is in the PCI:1 slot. It's DVI out is going to "acerLeft", it's VGA out is going to "acerRight".
    GeForce GT 610 is in PCI:2 slot. It's VGA out is going to "acerTop".
    thanks!

  • Xorg.conf multiple monitors different refresh rates

    I have two monitors on my setup, with my primary montor being to the right of my secondary. They both have resolution 1920x1080. I'm trying to get my primary monitor to run at 120 Hz but it's only doing 60. My secondary monitor is a different model that can only do 60 Hz.
    This is my xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 349.16 (buildmeister@swio-display-x86-rhel47-06) Wed Apr 8 00:52:19 PDT 2015
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 349.16 (buildmeister@swio-display-x86-rhel47-06) Wed Apr 8 00:51:15 PDT 2015
    Section "ServerLayout"
    Identifier "Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "ServerFlags"
    Option "RandR" "on"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "ASUS"
    ModelName "ASUS VG278"
    HorizSync 60.0 - 166.0
    VertRefresh 112.0 - 152.0
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Dell"
    ModelName "Dell ST2320L"
    HorizSync 45.0 - 70.0
    VertRefresh 50.0 - 80.0
    Option "LeftOf" "Monitor0"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 680"
    EndSection
    Section "Screen"
    Identifier "Screen"
    Device "NVIDIA GeForce GTX 680"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Monitor-DVI-I-1" "Monitor0"
    Option "Monitor-DVI-D-0" "Monitor1"
    SubSection "Display"
    Virtual 3840 1080
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "metamodes" "DVI-D-0: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +1920+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    This is actually one of the first times i've had to go under the hood linux (I've recently been using a linux computer at work) so I'm pretty newbie - any help would be greatly appreciated.

    After making the edits and restarting
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 349.16 (buildmeister@swio-display-x86-rhel47-06) Wed Apr 8 00:52:19 PDT 2015
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 349.16 (buildmeister@swio-display-x86-rhel47-06) Wed Apr 8 00:51:15 PDT 2015
    Section "ServerLayout"
    Identifier "Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "ServerFlags"
    Option "RandR" "on"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "ASUS"
    ModelName "ASUS VG278"
    HorizSync 60.0 - 166.0
    VertRefresh 112.0 - 152.0
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Dell"
    ModelName "Dell ST2320L"
    HorizSync 45.0 - 70.0
    VertRefresh 50.0 - 80.0
    Option "LeftOf" "Monitor0"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 680"
    EndSection
    Section "Screen"
    Identifier "Screen"
    Device "NVIDIA GeForce GTX 680"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Monitor-DVI-I-1" "Monitor0"
    Option "Monitor-DVI-D-0" "Monitor1"
    Option "UseEDIDFreqs" "False"
    SubSection "Display"
    Virtual 3840 1080
    Depth 24
    Modes "1920x1080_119.98" "1920x1080_60"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "metamodes" "DVI-D-0: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +1920+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    My screen is still in 60 Hz . Stubborn screen.
    Last edited by jeremy5561 (2015-05-18 02:36:29)

  • [SOLVED] Prev working xorg.conf won't work with new nvidia

    So I just upgraded to the latest nvidia driver.  Previously, my xfx 6600 and dell 2001fp could display 1600x1200 just fine, but now it's ratcheting X down to 1400x1050 (even though 1600x1200 is the only option I've specified in the xorg.conf).
    Any ideas? 
    Here's a relevant piece of the X log:
    (II) NVIDIA(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
    (II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
    (II) NVIDIA(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
    (II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    (II) NVIDIA(0): Not using mode "1600x1200" (no mode of this name)
    (**) NVIDIA(0): Validated modes for display device DFP-0:
    (**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
    Here's my xorg.conf (sorry for the length):
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    Load "type1"
    # Load "speedo"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    RgbPath "/usr/X11R6/lib/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/X11R6/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "microsoft"
    Option "XkbLayout" "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "dell lcd"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31-79
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-100
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "xfx"
    Driver "nvidia"
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "xfx"
    Monitor "dell lcd"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1600x1200"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    thanks

    http://www.nvnews.net/vbulletin/showthread.php?t=51431
    Here's the one I'm using:
    Modeline "1600x1200" 140.00 1600 1632 2024 2052 1200 1200 1208 1216

  • Xorg.conf resolution error resolution wont set.

    hello i seem to be having troubles with my xorg.conf file.
    Im trying to set my resolution
    which is
    1680x1050
    here is the link to the exact monitor im using
    http://www.amazon.com/Samsung-SyncMaste … B0013PSOT0
    here is a paste bin of my xorg.conf output
    http://pastebin.ca/1587420
    My graphics card is a
    Nvidia Corperation NV28GL (Quadro 980 XGL) (rev a1)
    I got that from lspci  |  grep VGA
    thanks for the help appreciate it.
    And i also ran Xorg -config and nvidia-xconfig
    not sure why i did not fix anything.
    Isnt the configuration supposed to preconfigure the monitor for you?
    Last edited by undergroundx (2009-10-01 08:21:24)

    That doesnt make any sense i have Nvidia installed. I even asked in another post on which to install
    This one here
    http://bbs.archlinux.org/viewtopic.php?id=81087
    and also
    http://bbs.archlinux.org/viewtopic.php?id=81082
    And when i did nvidia the first install around everything worked?
    Not sure what else to do.
    Here are my monitor specs
    http://www.amazon.com/Samsung-SyncMaste … B0013PSOT0

  • Xorg.conf with 720p on sanyo z5 beamer using vga and nvidia

    Hi,
    just wanted to publish my xorg.conf which is able to display 720p resolution on my sanyo z5 beamer using vga connection (all hdmi inputs are already been used).
    Maybe it is useful for somebody else.
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Generic Keyboard"
    InputDevice "Configured Mouse"
    EndSection
    Section "Module"
    Load "dri"
    Load "dbe"
    Load "glx"
    Load "dri2"
    Load "extmod"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "XkbLayout" "de"
    #Option "XkbVariant" "nodeadkeys"
    EndSection
    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "Sensitivity" "0.5"
    Option "Emulate3Buttons" "no"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "CRT-1"
    HorizSync 31.5 - 68.4
    VertRefresh 30.0 - 85.0
    Gamma 1
    ModeLine "1280x720" 74.25 1280 1720 1760 1980 720 725 730 750 +HSync +VSync
    Option "UseEdidDpi" "FALSE"
    Option "DPI" "100x100"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 8500 GT"
    Option "ModeValidation" "NoDFPNativeResolutionCheck"
    Option "DPMS" "off"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "UseEvents" "1"
    Option "AddARGBVisuals" "1"
    Option "NoLogo" "1"
    Option "AddARGBGLXVisuals" "True"
    Option "TwinView" "0"
    Option "metamodes" "1280x720 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "ServerFlags"
    Option "blank time" "0"
    Option "standby time" "0"
    Option "suspend time" "0"
    Option "off time" "0"
    Option "Xinerama" "0"
    Option "AutoAddDevices" "False"
    EndSection
    Section "DRI"
    MODE 0666
    EndSection

    mod action: Moving from Kernel & Hardware to Applications & Desktop Environments.

  • A single screen resolution in xorg.conf, YET X11 still startups wrong

    Hi. There's something that has been bugging me for a while. When I boot the first time my thinkpad SL500, usually (95% of the cases) X sets the resolution to 1024x768. Yet the ONLY screen res available in xorg.conf is 1280 x 800. In order to get to 1280x 800 I init 4 && init 5 every time. Why is this and how to fix it?
    xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri2"
    Load "glx"
    Load "dri"
    Load "record"
    Load "dbe"
    Load "extmod"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "evdev"
    Option "XKbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    Option "XkbModel" "pc105"
    Option "XkbRules" "xorg"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    Option "SendCoreEvents" "true"
    Option "VertEdgeScroll" "on"
    Option "HorizEdgeScroll" "on"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
    Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
    Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
    Gamma 0.70 0.70 0.70 # created by KGamma
    EndSection
    Section "Device"
    Identifier "Intel X4500MHD"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    Option "DRI" "true"
    Option "AccelMethod" "uxa"
    Option "MigrationHeuristic" "greedy"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Depth 24
    Modes "1280x800_60.00"
    Viewport 0 0
    EndSubSection
    EndSection
    And /var/log/Xorg.0.log (non-relevant stuff stripped, shows only (WW) or (EE) and related):
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux evolution 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (EE) Keyboard0: No device specified.
    (II) UnloadModule: "evdev"
    (EE) PreInit returned NULL for "Keyboard0"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event11"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): Using EDID range info for horizontal sync
    (II) intel(0): Using EDID range info for vertical refresh
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): EDID vendor "LEN", prod id 16464
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
    (II) intel(0): EDID vendor "LEN", prod id 16464
    As you can see, there's also a problem with the keyboard. How to get it working? Currently the keyboard layout is set via my DM.
    Thanks.
    Last edited by Flavious (2009-10-26 08:30:48)

    As I understand it your xorg.conf file needs fixing: you have 3 modelines:
    Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
    Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
    Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
    in the Monitor section. Two of them have the same name, and in the in the Display section you are referring to a fourth mode "1280x800_60.00" that is never defined before.
    Instead find out the correct mode from you monitor specs, then compute its modeline via cvt, then put that modeline into the Monitor section and refer to it in the display section.

  • [SOLVED] Virtual screen resolution in xorg.conf being ignored

    I'm trying to configure a dual monitor set up but xrandr is telling me the max screen size is 1600x1600. I have already enterd a virtual resolution in xorg.conf.
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Virtual 2832 1050
    EndSubSection
    EndSection
    When I first installed Arch I was using the radeon drivers. I had no problem configuring my monitors the way I wanted. Now I'm using catalyst and getting errors.
    Am I just doing something wrong?
    Last edited by thetoxikavenger (2010-06-06 15:58:18)

    I didn't really fix the issue with xrandr, but I did manage to get my dual monitors to work with Xinerama.

  • Xorg.conf can't set resolution right everything is blurry

    i just switched from CRT to LCD and it looks really bad.
    DELL 1907FP
    I've set xorg.conf according to the monitor specifications
    resolution is set to monitor's native resolution and the display size is set
    to the one specified in the monitor manual.
    http://www.vladuz976.com/aboutdell.html
    this is my xorg.conf
    http://www.rafb.net/paste/results/NWpuq274.html
    The fonts in all windows and the resolution look really bad. everything seems to be a bit blurry in general.
    Did i set something wrong in xorg.conf?
    what should the DPI be?
    vladuz@box:/etc/X11$ xdpyinfo | grep resolution
    resolution: 85x86 dots per inch

    the picture looks a little better now. I set the vertical range from a range to a
    specific value (75.0), looks better now.
    but i get
    xdpyinfo | grep resolution gives 85x86 dots per inch
    isn't that a little low for a 19" 1280x1024 with display size of 380mm 300mm?

  • Xorg.conf for T510 + NVIDIA NVS 3100M

    Can you send me, or point me to a website with a working and well tuned xorg.conf for T510 + NVIDIA NVS 3100M.
    I've had a few problems creating one myself and I am sure that many people have good working X configurations.
    I am using Kubuntu 11.04.

    For me this works great, just add or replace this section in your xorg,conf
    Section "Device"
            Identifier      "Default Device"
            Driver  "nvidia"
            Option  "NoLogo"        "True"
            Option "RegistryDwords" "EnableBrightnessControl=1"
            Option  "Coolbits" "1"
            Option  "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelsrc=0x2222; PowerMizerLevel=0x3;  PowerMizerDefault=0x3; PowerMizerDefaultAC=0x3"
            Option      "OnDemandVBlankInterrupts" "True"
    EndSection

  • Xorg.conf: can't configure resolution lower than 1152x864

    Hi,
    I just installed Arch (base system + X11 + XFCE + handful of apps) on five computers in our public library. One of the machines has an ATI graphic card:
    [biblio@mediatheque1:~] $ lspci | grep VGA
    01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
    Every machine has a 17'' flatscreen monitor. Usually, I configure xorg.conf to use a resolution of 1024x768. Some of the users here are older and often visually impaired, and I generally avoid using resolutions higher than this on this type of monitor. But I can't seem to configure it on my ATI card. Ah, yes: I'm using the open source xf86-video-ati driver. And here's the relevant bits from xorg.conf:
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1152x864"
    EndSubSection
    EndSection
    When I specify 1024x768 and restart X, the resolution won't change. So I leave it at that, since when I specify nothing, it looks like it want to default to something even higher, my guess is 1280x1024, which is barely legible on a 17'' monitor.
    I had a similar problem on the other machines, using recent Intel cards. I found a workaround, in that I replaced the recent xf86-video-intel drivers by the older xf86-video-i810 driver. Only the latter seemed to accept the 1024x768 resolution.
    Any suggestions for this?

    I'll answer this myself. After leafing through my logfiles, I found the following solution. Add this line to the Display SubSection:
    Virtual 1024 768
    Last edited by kikinovak (2008-04-15 08:25:27)

  • Turn off screen after a certain time in xorg.conf

    added
    Option "DPMS" "true"
    to monitor
    and
    Option "OffTime" "1"
    to serverflags
    and it doesn't work.
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder26) Thu Feb 14 18:13:41 PST 2008
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # Files section. This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    Identifier "Simple Layout"
    Screen "Screen 1" 0 0
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    Option "OffTime" "1"
    EndSection
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    # Load "type1"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    Load "synaptics"
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "freetype"
    # Load "xtt"
    Load "glx"
    EndSection
    Section "InputDevice"
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Option "XkbRules" "xorg"
    Option "XkbModel" "latitude"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    # Identifier and driver
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    EndSection
    #Section "InputDevice"
    # Identifier "touchpad"
    # Driver "synaptics"
    # Option "Device" "/dev/psaux"
    # Option "Device" "/dev/input/mouse0"
    # Option "Protocol" "auto-dev"
    # Option "LeftEdge" "1700"
    # Option "RightEdge" "5300"
    # Option "TopEdge" "1700"
    # Option "BottomEdge" "4200"
    # Option "FingerLow" "25"
    # Option "FingerHigh" "30"
    # Option "MaxTapTime" "180"
    # Option "MaxTapMove" "220"
    # Option "VertScrollDelta" "100"
    # Option "MinSpeed" "0.06"
    # Option "MaxSpeed" "0.12"
    # Option "AccelFactor" "0.0010"
    # Option "SHMConfig" "on"
    #EndSection
    Section "InputDevice"
    Identifier "touchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    #Option "Device" "/dev/input/mice"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "false" # configurable at runtime? security risk
    Option "LeftEdge" "1700" # x coord left
    Option "RightEdge" "5300" # x coord right
    Option "TopEdge" "1700" # y coord top
    Option "BottomEdge" "4200" # y coord bottom
    Option "FingerLow" "25" # pressure below this level triggers release
    Option "FingerHigh" "30" # pressure above this level triggers touch
    Option "MaxTapTime" "180" # max time in ms for detecting tap
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
    Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
    Option "CoastingSpeed" "0.30" # corner coasting speed
    Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
    Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
    Option "MinSpeed" "0.10" # speed factor for low pointer movement
    Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
    Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
    Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
    Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
    EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "My Monitor"
    HorizSync 31.5 - 64.3
    VertRefresh 50.0 - 60.0
    Option "DPMS" "true"
    EndSection
    Section "Device"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    Identifier "Standard VGA"
    Driver "vga"
    VendorName "Unknown"
    BoardName "Unknown"
    EndSection
    Section "Device"
    Option "NoLogo" "True"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    Identifier "* Generic VESA compatible"
    Driver "nvidia"
    EndSection
    Section "Screen"
    Identifier "Screen 1"
    Device "* Generic VESA compatible"
    Monitor "My Monitor"
    DefaultDepth 24
    #Option "LogoPath" "/etc/X11/tuxlogos.png"
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900" "1280x1024" "1024x768" "800x600"
    EndSubSection
    EndSection

    now I have this and it still doesn't work.
    Section "ServerLayout"
    Identifier "Simple Layout"
    Screen "Screen 1" 0 0
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
    Option "OffTime" "1"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection

  • Xorg defaults to wrong resolution[SOLVED]

    Hey All,
    I just reinstalled Arch after a 6 month hiatus, and I'm having a bit of trouble with my Xorg.conf.
    I have a 1440x900 resolution laptop, but X starts at 1024x768. I have a Nvidia Geforce go 6150. I'm using the Nvidia driver. Here are the pertinent parts of xorg.conf:
    I feel like I don't need 90% of this crap. I added the first ModeLine entry myself, the rest were autogenerated. I don't really know what those strings of numbers are, I just stole them from another post.
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    ModeLine "1440X900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    I added the 1440x900 parts by hand.
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Am I just not entering these options with the right syntax or something?
    Edit:
    And here's my log:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux Hal 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 8 20:19:00 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "USB Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@0:5:0) nVidia Corporation C51 [Geforce 6150 Go] rev 162, Mem @ 0xb2000000/0, 0xc0000000/0, 0xb1000000/0, BIOS @ 0x????????/131072
    (--) PCI: (0@0:10:3) nVidia Corporation MCP51 PMU rev 163, Mem @ 0xb0040000/0
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (WW) Warning, couldn't open module record
    (II) UnloadModule: "record"
    (EE) Failed to load module "record" (module does not exist, 0)
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 00@00:05:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce Go 6150 (C51) at PCI:0:5:0 (GPU-0)
    (--) NVIDIA(0): Memory: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.51.28.53.15
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce Go 6150 at PCI:0:5:0:
    (--) NVIDIA(0): LPL (DFP-0)
    (--) NVIDIA(0): LPL (DFP-0): 310.0 MHz maximum pixel clock
    (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    (--) NVIDIA(0): DPI set to (70, 84); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GPU GART.
    (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    (II) NVIDIA(0): configuration option may not be set correctly. When the
    (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) NVIDIA(0): Setting mode "1024x768"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) Option "dpms" "true"
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (WW) Option "XkbVariant" requires an string value
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (**) Option "Protocol" "IMPS/2"
    (**) USB Mouse: Device: "/dev/input/mice"
    (**) USB Mouse: Protocol: "IMPS/2"
    (**) Option "SendCoreEvents" "true"
    (**) Option "CorePointer"
    (**) USB Mouse: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "5"
    (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) USB Mouse: ZAxisMapping: buttons 4 and 5
    (**) USB Mouse: Buttons: 9
    (**) USB Mouse: Sensitivity: 1
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (USB Mouse)
    (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
    (II) USB Mouse: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (EE) config/hal: NewInputDeviceRequest failed
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed
    Last edited by Joe_Arch (2009-03-08 23:47:32)

    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    Default depth is 24, but the Depth 24 section doesn't include 1440x900
    Bob

Maybe you are looking for

  • HT202856 Can the Mac Mini (Late 2014) support 4k display @ 60 Hz via the DisplayPort?

    Dear Experienced Apple Guru, Apple made it clear on the Tech Specs for the Mac Mini (Late 2014) that a 4k display can be supported via the HDMI port at 30 Hz. But, can we also be clear how many Hertz the Mac Mini can handle with a 4k display via the

  • Error 109 Problem when trying to download 5.5 trial?

    So i've uninstalled everything Adobe on my mac, and deleted any other straggling folders that did not have an "uninstall" anywhere in them, and have even downloaded the Adobe Creative Suite Cleaner Tool and it couldn't even find anything to uninstall

  • Adobe Reader 9 - Printing error, ony get one pg. HELP!

    Ok, I have installed Adobe Reader 9 as I had 5 and I kept getting a msg saying certain files were encrpted which is not true. Anyways, use it for work and now it doesnt print the complete document, it prints the first page and thats it. I've changed

  • Using workflow with Oracle InterConnect

    Has anybody had any experience using Oracle WorkFlow with Oracle InterConnect? I have created events deployed by iStudio to Oracle Workflow but when I try to send the message, the activity/function that I create (both PL/SQL or External Java) using O

  • App for tracking inventory, raw material, expenses, sales, etc.

    I'm on the verge of starting a simple business (if all goes well). I will be producing simple things like candles, eventually essential oils, etc, but may also sell things NOT produced from raw materials. I'm wondering if anyone has a recommendation