Xorg display configuration files.

I tried to change my display configuration using gnome-control-center.
setting to a too small configuration know I cannot undo it and screwed the display on my screen.
I can still do Ctrl+Alt+Fx to delete/edite file.
I tried to follow this document https://wiki.archlinux.org/index.php/Xo … ng_started
But i didn't change anything.
Does somenone know what file should I delete to return to my normal configuration?
Best Regards

If the gnome-control-center is a frontend for xrandr, try opening a terminal in gnome and typing "xrandr --output WHATEVER --mode RESOLUTION". The name of the output can be found with an "xrandr -q". An example command would be "xrandr --output DVI-0 --mode 1600x1200". If this is a one time fix and gnome doesn't save it, an xorg.conf with the following section will be able to override it.
Section "Screen"
SubSection "Display"
Modes "1600x1200"
EndSubSection
EndSection

Similar Messages

Xorg configuration file

Is there anyone using an NVIDIA Geforce GTX 285M card? If so, could you please give me your xorg.conf file? I installed arch linux on my new laptop a week ago and for some reason haven't been able to get xorg to use the nvidia drivers. I am hoping that someone would have an xorg config file, for their GTX 285M card. I would be happy to try it out.. cos Im at my wits end trying to get it to work. All of last week, was just one big drag after another trying to find a solution. This is my last resort... I hate to think i might have to install crap vinduze..
Thank you.
PS: actually an xorg.conf file on a system with any of the newest nvidia cards might work I think.
thaks

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
The only line I added was "Option "NoLogo" "True"".
As you can see, my xorg is very bare and plain. Could that be the reason why Im not getting display? Are there supposed to be certain options that I have missed?
And is DPMS necessary?
Thats the xorg.conf file.
What follows is the log file that you had asked for.
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux TheRock 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/sdb1 ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 09:28:36 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:2:0:0) 10de:060f:1558:8687 nVidia Corporation rev 162, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(**) Logitech Optical USB Mouse: Device: "/dev/input/event11"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found scroll wheel(s)
(II) Logitech Optical USB Mouse: Found relative axes
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) acceleration profile 0
(II) Logitech Optical USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device BisonCam, NB Pro
(**) BisonCam, NB Pro: always reports core events
(**) BisonCam, NB Pro: Device: "/dev/input/event10"
(II) BisonCam, NB Pro: Found keys
(II) BisonCam, NB Pro: Configuring as keyboard
(II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
There are a few warnings regarding ACPI and "AllowEmptyInput". Could that be the problem?
Thank you very much.

I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat.

Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
Ramon

Moving this discussion to the Adobe Reader forum.

Date display setup - is there configuration file option for this?

I have just installed SQL Developer and am loving it BUT since I am a long time SQL*Navigator user, one thing floored me.
In SQL*Navigator, there is preference you can set that will display all dates in the format you want, I don't see that option here in SQL*Developer. It is defaulting to yy-mm-dd. I understand I can alter my session or use a to_char function to get the date in the format I want, but isn't there a configuration file somewhere or preference I can set to the date/time format I would like to display each time I use SQL*Developer???????

Oracok, there is no way to do this in SQL Developer according to the oracle.com website:
http://www.oracle.com/technology/products/database/sql_developer/howtos/howto_policy_date_formats.html
As for wanting to be able to do this - Seconded. I would love it if there was an equivalent to the SQL*Plus glogin.sql that could be run every time SQL Developer opened.
-Natalka
http://toolkit.rdbms-insight.com

Configuration - Display of file names

I am running DW8 and SourceSafe 2005. Everything was working
well. At some point DW began displaying the file names as 8.3
filenames with the ~ at the end of the name if the file name was
longer that 8 characters. Everything still saves to SourceSafe
correctly and I am able to put the files to the Web server
correctly. In each of those areas the long file names are correct,
but in DW I get 8.3 names. This is very difficult because are files
are grouped by type of page, so if it was a product page the file
might be called productBaseContent.jsp, or productExtContent.jsp,
and in DW you see produc~1.jsp, and produc~2.jsp.
I have looked and tried to find a solution, but to
noavai~1..... So I then uninsta~2, and reinst~3 DW, this also did
not solve the issue. Any help would be gladly accepted...

A FileDialog just returns a String, which is the pathname of the file that was selected when the dialog was dismissed. The FileDialog does not automatically do anything with that String, like open the specified file. What you do with the String is up to you.
Are you using the String to try to open a file? If so, post that code.

Configure DW CC to display .txt files like .cfm files

Earlier DW versions allowed the user to edit the MMDocumentTypes.xml and Extensions.txt files to customize the color coding of file types. On DW CC 13.2 I'm trying to display .txt files in Code View identical to .cfm files, but editing MMDocumentTypes.xml and Extensions.txt no longer seems to have any effect. Here's the app note that used to work...
http://kb2.adobe.com/cps/164/tn_16410.html
What am I doing wrong?

I'm having this same issue trying to view .inc files in split view using DW CC 2014.1.
I've never had issues on other versions of DW after editing the MMDocumentTypes.xml file

Solaris10/amd64 and Xorg display rotation using Nvidia 5200 driver

Hello,
in both XFree86 and in Xorg X11 implementations, the driver for Nvidia cards include support for display rotation which is quite nice feature having display which support it. I like it in linux and also would like to give it a try in Solaris10/amd64 which I'm tryint to use as a developer system now, but unfortunately I'm not able to find out where the configuration file(s) for bundled Xorg resides, or at least from looking into "top" utility I see process Xorg which I assume is Xorg's X server. My other assumptions are that if using Xorg, then Sun also uses Xorg's drivers and also Xorg's configuration -- if this is not true, please correct me.
Thanks!
Karel

The Xorg configuration file is /etc/X11/xorg.conf but does not exist by default, instead autoconfiguring on startup. To generate a configuration file, do a command line login as root and run /usr/X11/bin/Xorg -configure.

Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao.

Reading Encrypted Password from Configuration File and Decrypt it at login

Hi All,
My application reads a configuration file to connect to the ORACLE database. The values defined for password are clear text as given below:
user: 'mh'
password='abcd1234'
Is there is any way I can give an encrypted password in the configuration file instead of a clear text file and at the time of login ORACLE decrypts it. I am using ORACLE 11g Database.
My company have a requirement that passwords are not stored in the clear in properties files. the reason being I suppose that if the password is stored in plaintext someone could hit the property file directly, get the password and then connect to the database with it.
For a regular user connecting through an Oracle client or SQL Developer they would need to have the plaintext password in order to connect.
its based on the requirements of
International Standards Organization Guidance
ISO 17799 � 9.5.4 requires password management systems to:
� enforce the use of individual passwords
� allow users to select and change their own passwords if appropriate
� enforce a choice of quality passwords
� force regular changes of passwords
� maintain a record of previous user passwords to prevent re-use
� not display passwords when they are being entered
� store password files separately from application system data
� store passwords in encrypted form using a one way encryption algorithm
� alter default vendor passwords following installation of software
So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.
I have feeling there is a way of configuring this in Oracle advanced Security, but just can't quite get it to work.
Edited by: user5568473 on 20-May-2013 00:05

So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.... and neither can your application. Encryption is needed in this case. The decryption must be written into your application. I've written my own in some cases, but finding a library for your development language is a smarter solution.
One alternative is using an Oracle wallet. It doesn't fit every circumstance and does have some maintenance headaches.
You can set up a basic secure password store to encrypt and store the password for a given user@instance combination, and then connect to the database without passing a password. SQL*Net adds in the appropriate password from the wallet for when you connect.
http://www.oracle.com/technetwork/database/security/twp-db-security-secure-ext-pwd-stor-133399.pdf
Advanced Security Option also allows you to set up a Public Key Infrastructure connections (SSL encryption and/or authentication). It also uses a wallet to store the SSL certificates and credentials. I don't have personal experience on this approach.
SSL and the wallet allow you to connect to the database similar to CONNECT/@net_service_name or sqlplus /@net_service_namehttp://docs.oracle.com/cd/B28359_01/network.111/b28530/asossl.htm#CIHCBIEG

The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
Thanks

Nicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
    <Product ID="ProPlusVolume">
      <Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
    </Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks

Configuration file /service/common/bc4j.xcfg is not found in the classpath.

hi have a situation where when i add a certain jar in my portal application am geting this error but if i remove the jar in the portal application am geting the error where mis the problem is in my jar must i go to my jar application and solve problem there and where if the problem is in my portal where must i solve the proble am in jdeveloper 11.1.1.6.0
the log error is
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Configuration file test3/test4/test2/test1/bc/service/common/bc4j.xcfg is not found in the classpath.
oracle.jbo.ConfigException: JBO-33001: Configuration file /test3/test4/test2/test1/bc/service/common/bc4j.xcfg is not found in the classpath.
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:467)
     at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:600)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:526)
     at oracle.adf.model.bc4j.DCJboDataControl.findApplicationPool(DCJboDataControl.java:572)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeSessionCookie(DCJboDataControl.java:396)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeJboSession(DCJboDataControl.java:310)
     at oracle.adf.model.bc4j.DataControlFactoryImpl.createSessionInternal(DataControlFactoryImpl.java:220)
     at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:130)
     at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2004)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1360)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer.encodeAll(PanelSplitterRenderer.java:279)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
     at oracle.adfinternal.view.faces.renderkit.rich.PageTemplateRenderer.encodeAll(PageTemplateRenderer.java:69)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.encodeEnd(ContextSwitchingComponent.java:155)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
     at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
     at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
how can i make sure your .jar ViewController project have Model project as a dependency,how can i search this path in jdeveloper /test1/test2/test3/test4/bc/service/common/bc4j.xcfg
Edited by: adf009 on 2013/04/11 9:47 AM
Edited by: adf009 on 2013/04/11 11:19 AM
Edited by: adf009 on 2013/04/11 11:19 AM

but am still geting the error in my portal application
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Configuration file /za/gov/cadastre/vulindlela/bc/service/common/bc4j.xcfg is not found in the classpath.
oracle.jbo.ConfigException: JBO-33001: Configuration file /za/gov/cadastre/vulindlela/bc/service/common/bc4j.xcfg is not found in the classpath.
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:467)
     at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:600)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:526)
     at oracle.adf.model.bc4j.DCJboDataControl.findApplicationPool(DCJboDataControl.java:572)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeSessionCookie(DCJboDataControl.java:396)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeJboSession(DCJboDataControl.java:310)
     at oracle.adf.model.bc4j.DataControlFactoryImpl.createSessionInternal(DataControlFactoryImpl.java:220)
     at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:130)
     at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:167)
     at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1056)
     at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1566)
     at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1438)
     at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1398
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
my jar file DataBindings.cpx is
<?xml version="1.0" encoding="UTF-8" ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application"
             version="11.1.1.61.92" id="DataBindings" SeparateXMLFiles="false"
             Package="uam.view" ClientType="Generic"
             ErrorHandlerClass= "uam.view.CustomErrorHandler">
<definitionFactories>
    <factory nameSpace="http://xmlns.oracle.com/adf/controller/binding"
             className="oracle.adf.controller.internal.binding.TaskFlowBindingDefFactoryImpl"/>
    <dtfactory className="oracle.adf.controller.internal.dtrt.binding.BindingDTObjectFactory"/>
</definitionFactories>
<pageMap>
    <page path="/payment.jsff" usageId="uam_view_paymentPageDef"/>
    <page path="/test.jspx" usageId="uam_view_testPageDef"/>
    <page path="/security.jsff" usageId="uam_view_securityPageDef"/>
    <page path="/pdetails.jsff" usageId="uam_view_pdetailsPageDef"/>
    <page path="/odetails.jsff" usageId="uam_view_odetailsPageDef"/>
    <page path="/opayment.jsff" usageId="uam_view_opaymentPageDef"/>
    <page path="/members.jsff" usageId="uam_view_membersPageDef"/>
    <page path="/suburb.jsff" usageId="uam_view_suburbPageDef"/>
    <page path="/testsub.jspx" usageId="uam_view_testsubPageDef"/>
    <page path="/WEB-INF/register-org-flow.xml#register-org-flow@CreateInsert"
          usageId="uam_view_register_org_flow_register_org_flow_CreateInsertPageDef"/>
    <page path="/SelectOrg.jsff" usageId="uam_view_SelectOrgPageDef"/>
    <page path="/updateorg.jspx" usageId="uam_view_updateorgPageDef"/>
    <page path="/OrgDetails.jsff" usageId="uam_view_OrgDetailsPageDef"/>
    <page path="/User.jsff" usageId="uam_view_UserPageDef"/>
    <page path="/ListUsr.jsff" usageId="uam_view_ListUsrPageDef"/>
</pageMap>
<pageDefinitionUsages>
    <page id="uam_view_paymentPageDef" path="uam.view.pageDefs.paymentPageDef"/>
    <page id="uam_view_testPageDef" path="uam.view.pageDefs.testPageDef"/>
    <page id="uam_view_securityPageDef"
          path="uam.view.pageDefs.securityPageDef"/>
    <page id="uam_view_pdetailsPageDef"
          path="uam.view.pageDefs.pdetailsPageDef"/>
    <page id="uam_view_odetailsPageDef"
          path="uam.view.pageDefs.odetailsPageDef"/>
    <page id="uam_view_opaymentPageDef"
          path="uam.view.pageDefs.opaymentPageDef"/>
    <page id="uam_view_membersPageDef" path="uam.view.pageDefs.membersPageDef"/>
    <page id="uam_view_suburbPageDef" path="uam.view.pageDefs.suburbPageDef"/>
    <page id="uam_view_testsubPageDef" path="uam.view.pageDefs.testsubPageDef"/>
    <page id="uam_view_register_org_flow_register_org_flow_CreateInsertPageDef"
          path="uam.view.pageDefs.register_org_flow_register_org_flow_CreateInsertPageDef"/>
    <page id="uam_view_SelectOrgPageDef"
          path="uam.view.pageDefs.SelectOrgPageDef"/>
    <page id="uam_view_updateorgPageDef"
          path="uam.view.pageDefs.updateorgPageDef"/>
    <page id="uam_view_OrgDetailsPageDef"
          path="uam.view.pageDefs.OrgDetailsPageDef"/>
    <page id="uam_view_UserPageDef" path="uam.view.pageDefs.UserPageDef"/>
    <page id="uam_view_ListUsrPageDef" path="uam.view.pageDefs.ListUsrPageDef"/>
</pageDefinitionUsages>
<dataControlUsages>
    <dc id="OrgValidationBean" path="uam.view.OrgValidationBean"/>
    <dc id="UAMUtil" path="uam.view.UAMUtil"/>
    <BC4JDataControl id="UAMAppModuleDataControl1"
                     Package=".model.common"
                     FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
                     SupportsTransactions="true" SupportsFindMode="true"
                     SupportsRangesize="true" SupportsResetState="true"
                     SupportsSortCollection="true"
                     Configuration="UAMAppModuleLocal" syncMode="Immediate"
                     xmlns="http://xmlns.oracle.com/adfm/datacontrol"/>
    <BC4JDataControl id="OrgAppModuleDataControl"
                     Package=".model"
                     FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
                     SupportsTransactions="true" SupportsFindMode="true"
                     SupportsRangesize="true" SupportsResetState="true"
                     SupportsSortCollection="true"
                     Configuration="OrgAppModuleLocal" syncMode="Immediate"
                     xmlns="http://xmlns.oracle.com/adfm/datacontrol"/>
    <BC4JDataControl id="AppModuleDataControl"
                     Package=".model"
                     FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
                     SupportsTransactions="true" SupportsFindMode="true"
                     SupportsRangesize="true" SupportsResetState="true"
                     SupportsSortCollection="true"
                     Configuration="OrgAppModuleLocal" syncMode="Immediate"
                     xmlns="http://xmlns.oracle.com/adfm/datacontrol"/>
    <BC4JDataControl id="UpdAppModuleDataControl"
                     Package=".model.UpdOrgDetails"
                     FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
                     SupportsTransactions="true" SupportsFindMode="true"
                     SupportsRangesize="true" SupportsResetState="true"
                     SupportsSortCollection="true"
                     Configuration="UpdAppModuleLocal" syncMode="Immediate"
                     xmlns="http://xmlns.oracle.com/adfm/datacontrol"/>
</dataControlUsages>
</Application>
and my portal DataBindings.cpx is
<?xml version="1.0" encoding="UTF-8" ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application"
             version="11.1.1.59.23" id="DataBindings" SeparateXMLFiles="false"
             Package="portal" ClientType="Generic"
             PageMapClass="oracle.jbo.uicli.mom.DynamicPageMapImpl"
             BasePageDefPackageName="pageDefs">
<pageMap>
    <page path="/oracle/webcenter/portalapp/pages/navigation-renderer.jspx"
          usageId="portal_navigation_rendererPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/home.jspx"
          usageId="portal_homePageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/login.jspx"
          usageId="portal_loginPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/error.jspx"
          usageId="portal_errorPageDef"/>
    <page path="/oracle/webcenter/portalapp/pagetemplates/pageTemplate_globe.jspx"
          usageId="portal_pageTemplate_globePageDef"/>
    <page path="/oracle/webcenter/portalapp/pagetemplates/pageTemplate_swooshy.jspx"
          usageId="portal_pageTemplate_swooshyPageDef"/>
    <page path="/oracle/webcenter/portalapp/pagetemplates/cadastreTemplate.jspx"
          usageId="cadastre_portal_cadastreTemplatePageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/register.jspx"
          usageId="cadastre_portal_registerPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/forgotUsername.jspx"
          usageId="cadastre_portal_forgotUsernamePageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/forgotPassword.jspx"
          usageId="cadastre_portal_forgotPasswordPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/content.jspx"
          usageId="cadastre_portal_contentPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/changePassword.jspx"
          usageId="cadastre_portal_changePasswordPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/upgateProfile.jspx"
          usageId="cadastre_portal_upgateProfilePageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/loginHome.jspx"
          usageId="cadastre_portal_loginHomePageDef"/>
    <page path="/oracle/webcenter/portalapp/pagetemplates/cadastreLoginTemplate.jspx"
          usageId="cadastre_portal_cadastreLoginTemplatePageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/spatialq.jspx"
          usageId="cadastre_portal_spatialqPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/admin/usrLoginReports.jspx"
          usageId="cadastre_portal_usrLoginReportsPageDef"/>
    <page path="/oracle/webcenter/portalapp/pages/admin/esubAdmin.jsp"
          usageId="cadastre_portal_esubAdminPageDef"/>
    <page path="/oracle/webcenter/porta
{code}
Edited by: adf009 on 2013/04/12 11:32 AM

Configure File Type Associations at startup everytime

Whenever I startup SQL Developer (1.5), the Configure File Type Associations opens up. No matter what I do, that window always displays when I first start SQL Developer.
My guess is that the information that this window is trying to save is being written somewhere that I don't have access to. I'm running on a machine that is locked down with very little permissions (I can't install any software). Obviously this information is not stored where the other settings are stored (\Documents and Settings\<your_user>\Application Data\SQL Developer) because I have full permisions to this folder.
Anyone else experiencing this behavior?
Thanks,
Rich

Hello everyone. I'm new to this site and I'm looking to find out where the "Configure File Type Associations" are stored in SQL Developer 1.5.1.54.40. I am running SQL Developer as a published application via CItrix, so my user community is locked down from many things, however, as full access to their profiles. Are these file associations stored in the registry? If so, does anyone know which key(s) store these settings? My users are very annoyed that they have to re-select their file associations every time they run SQL Dev from the pub app server. Any information would be greatly appreciated.

Configure File Type Associations

I just moved from Windows XP Professional 32 bit to Windows 7 Professional 64 bit and installed several versions of JDeveloper (10.1.3.5, 11.1.1.5, 11.1.2.1) on the new machine.
All of them are popping up the "Configure File Type Associations" window every time I start JDeveloper, no matter what my answer to the prompt. After I press OK or Cancel, all my versions of JDeveloper are working fine. But the pop up is getting annoying. On my Windows XP machine, this only popped up the first time I ran JDeveloper, and never again. Anybody know how I can stop it?

Not quite, csoto, but you inspired me to try something that seems to have done the trick. You were right, it is a Windows 7 issue.
I started one of my copies of JDeveloper with "Run as Administrator", pressed OK on the prompt. Then I closed JDeveloper and started it again as myself. Now none of my versions of JDeveloper are showing the prompt. Annoyance gone.
What I think is happening is that the "Configure File Type Associations" dialog needs to change something in the Windows registry. Windows 7 security requires you to have administrative rights to do this, so when you run JDeveloper without those rights, it can't make the change. But (and I think this should be considered a bug) it doesn't show an error to tell you that it didn't have the right to do it. It just closes the dialog window. The next time JDeveloper runs, it notices that you haven't set file associations yet, so it shows the dialog again. Running JDeveloper - any version - as Administrator lets it change the file associations (which apparently applies to all versions) so that it never displays the prompt again.

What are the following entries doing in the following configuration file?

What are the following entries doing in the following configuration file?
Thank you
<include>coherence-pof-config.xml</include>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>

<include>coherence-pof-config.xml</include>

<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>

<allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
<allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
<user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
<include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
http://wiki.tangosol.com/display/COH35UG/user-type-list
http://wiki.tangosol.com/display/COH35UG/pof-config
Thanks,
Everett Williams
Coherence Team

Sharing configuration files

Hi,
I've a couple of different cache servers offering a mix of services. Some of the services are shared among them and others are not. Is there a mechanism where I can declare those common services a file and import or include them in the respective configuration files of the servers?
Thanks
Sijo Mathew

Hi Sijo
Or if you do not want to build things yourself you could check out the Coherence Incubator Commons here http://coherence.oracle.com/display/INC10/coherence-common which has a way of combining multiple configuration files.
JK

Xorg display configuration files.

Similar Messages

Maybe you are looking for