Xperia Z2 SD Card Slot is Broken, help please

Dear support teams.
My Xperia Z2's sd card slot is broken. All of a sudden, the microsd flap was opened by itself, and the sd card popped out. Then everytime I try to insert the sd card, the slot ejects the sd card by itself.
What should I do? I don't want to bring my phone to the service center because it is notoriously bad in my country
Reply as fast as you can

Sorry to hear this but all you can do is either return your device to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Hi! I have an account from UK and I want to switch to the US, I can't because I still have Pounds 0,65 left! I can't buy any app because it is not enough credit & I cant add an american credit card either. I don't have credit cards from UK. HELP please!!

    Hi! I have an account from UK and I want to switch to the US.
    I can't because I still have Pounds 0,65 left!
    I can't buy any app because it's not enough credit but I can't add an american credit card either. I don't have credit cards from UK. HELP please!!
    I want an account from the US since my credit card is american.
    Thank you!

    Contact iTunes support in the UK and request that they zero out your account so that you can change the country in your account.

  • SD Card slot is broken

    I put an SD card into my SD card slot earlier on to take something off it. When I took it out I heard a snapping sound and after taking the card out, the top plastic bit which keeps the metal plates in place was gone. Now, no SD cards work in there because there is a bit of black plastic stopping them from going all the way. What the ****? Why is the slot eating my cards? Has anyone else had this problem and if you have, how did you fix it. I'm not shoving anything in there in case I break it forever. I'm going to take it to my local Apple Store next weekend if nobody can figure out how to get it out again.
    Thanks

    The top plastic bits of what? the card or the computer? As far as I am concerned they would be called bottom plastic bits on either the card or computer on my 15" MBP

  • New JAVA Update = Broken; HELP PLEASE

    Yesterday I was alerted to a new update for Java. I installed it and now JAVA doesn't work on this site I always use for work. Is this happening to anyone else? Any ideas on how to fix? Help please. Thanks.

    Yesterday I was alerted to a new update for Java. I installed it and now JAVA doesn't work on this site I always use for work. Is this happening to anyone else? Any ideas on how to fix? Help please. Thanks.

  • Picture card inserted upside down.Help Please.

    An XD picture card was inserted upside down into bridge media adapter slot.It is entirely into the slot. Can anyone tell me how to safely remove it? Thanks in advance for any help?

    wallflower wrote:
    Model: 9360
    The other day I needed to take a quick picture but my memory card was full so I quickly changed the settings to save the pictures to the device. Now, I would like to delete some of the pictures but delete isn't even an option in the menu and one of the pictures have a yellow globe infront of the photo name. I would really like to delete these pictures, what should I do?
    Suggestions? Similar experiences? 
    Try renaming, or moving the pictures back.
    Another thing to try, is connect the phone via the USB port on your computer. Set the phone to allow it to be used as a USB storage device. See if you can access the phone on your computer as if it is an external storage device. You should be able to explore the memory of the phone with your computer.
    For access to a BB phone the drivers have to be first installed for the computer to be able to work with the phone. You can install the desktop manager software. Also if I remember properly, I believe the Desktop manager software can manage the media contents of the BB phone.
    Jerry G.

  • I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

    I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

    You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • I want to output an arbitrary waveform using LabView onto the oscilliscope through the DAQ2005 card. Can anyone help please?

    Hey guys,
    I am new to LabView and my final year project depends on it! Please help as much as you can!
    I am trying to output an arbitrary waveform on an oscilliscope. The shape of the waveform depends on user input parameters like no. of samples, amplitude of each sample and the frequency of desired waveform. Please refer to attached Arbitrary_Wave_Display.vi. In the attached vi, the desired waveform is displayed on the front panel. My project requires that I output this waveform through the analogue output channels of the 2 DAQ2005 cards that I have. When I connect the output of th Arbitrary_Wave.vi to the input of the AO write express vi, there is no output of the oscilliscope. I believe it should be connection problems with regards to while loops and loop conditions. I have also attached my attempted vi.
    Please feel free to give some advice. It is greatly appreciated,
    Best regards,
    TheApprentice of LabView

    You didn't attach any VI and what is the DAQ 2005? I don't know of any NI board with that model number. The analog output functions on the LabVIEW DAQ palette only work with NI boards.

  • Return/enter key is broken, help please.

    So basically, after I downloaded an update for my computer, restarted, blah blah, my enter key broke. Also, my mouse would flash randomly sometimes too, and occasionally i would type a word only for it to be highlighted for some reason and I would accidentally delete it. But my main concern is the enter key. It's making using my macbook very difficult, and I would appreciate it if someone could help. Also, I'm using a 13 inch Macbook pro from late 2012, and the update was an update for mavericks, but I can't remember it's name.

    It's probably broken. I've never heard of software breaking a keys, but it's possible, so you might want to back up your data and do a clean install. If it still doesn't work , it needs to be repaired

  • Fitting a mini pci wifi card to a T21 HELP PLEASE! :D

    hello you lovely people
    I currently have USB2.0 functionality and wifi on my T21 courtesy of a dongle and power from the 5v mouse socket
    what i want to do is put a mini pci wifi card inside my T21 so i dont have a dongle sticking out like a sore thumb
    1. is this possible or is it only the T23 you can do this too?
    2. can anyone show me the specific card and aerial i would need
    i cant find any help on the net for the T21 in particular
    hoping someone here might shed some light on this
    thanks for any help or pointers you can give
    D
    T42 - T21 - Tecra 8200 all xp

    Your best bet would be to find a complete lid with integrated wireless from a T23, and add an internal card, Broadcom 4306 or 4309 (b/g and a/b/g respectively) have been proven to work well in these machines.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I have an Intel Imac Tiger 10.4 w/ built-in Airport card...Need help please

    I live in the sticks, so I am using a Verizon EVDO Broadband USB modem for internet connection (works great by the way)....I also have a Windows XP PC with a Belkin Wireless card....My question:
    Can I share my Mac's internet connection without buying or using a router or ethernet cable? Can I do it safely? Thanks so much.....

    Thanks for the info.....I have the "network" up and am able to use the mac's internet connection....However, when I try to enable the WEP encryption (40 bit), I lose the network and connection....I am inputting a 5 digit password into the Mac software, and adding that same password into the Belkin wireless software on the PC....But no go....As soon as I disable the encryption, I pick the signal back up....I am running the firewall and stealth modes....Will this be secure enough if I don't enable file sharing ?
    Thanks for helping....

  • SIM card ....HELP PLEASE

    I have an issue with the phone not reading the SIM card. I have cancelled my contract to go with straight talk and the sim card keeps saying " no SIM card. Please insert a SIM with no LOCK pin. " but the phone will not read AT&T SIM or Straight Talk SIM. The phone is unlocked with AT&T. Please HELP.

    I Am sure it's unlocked. I have spoken with Apple for the past 4 days. The Tech went into my computer and helped me with the restore.... This is crazy.... Now the last Apple guy I spoke to told me I may need to have it sent in and it would cost a lot of money.. It is set up as new now but when I try to set the Phone up... In the left hand corner it says no SIM. And then a screen pops up and says..." No SIM card Installed Insert a Valid SIM with no PIN lock to activate iPhone."

  • Photoshop is really broken, help please

    hi, i have had a problem for a while now and i am not really sure why.
    My problem is using the brush tool in Photoshop, while i am using it, it is fine, there are no problems but when i unclick to stop drawing on my trackpad and try to to scroll using two fingers on my trackpad nothing happens, my artwork doesn't move until i them command click back into the photoshop window, it then goes crazy and does all of the scrolling i tried to do before i command clicked back in.
    The same sort of thing is happening with a lot of the other tools, when i use the spot healing brush the area selected stays the dark grey colour until i command click back into photoshop then it will heal the area.
    The lasso tool shows the selection but does not start the marching ants until i command click again. The polygon lasso tool lags behind clicks, for example, when i click nothing happens, i then click again and nothing will happen, when i click for the third time the first two dots then connect, when i click again the next dots will connect but will never connect to the last dot until i click i join the shape up and click once more, which then makes the shape disappear.
    I am having the same sort of problem with the clone stamp tool, the history brush,  the eraser, the blur, sharpen, smudge, dodge, burn, sponge tools, i guess any tool that has a brush size. and all of the lasso tools. All of the other tools work fine to my knowledge.
    I think it has something to do with apples track pad, today i tried using a mouse and it worked fine, i could draw a line and then scroll with the little ball in the apple mouse and it worked fine, but when i drew a line on my trackpad then tried to scroll with the mouse it didn't do anything until i command clicked. i then tried to click with the mouse and use the trackpad to scroll and that also worked fine.
    Im currently using photoshop CC 2014 but i also had these issues in photoshop CC and i am pretty sure in photoshop CS6.
    I am using a macbook pro retina 15 these are the specs
    MacBook Pro   (Retina, 15-inch, Late 2013)
    Processor   2 GHz Intel Core i7
    Memory   8 GB 1600 MHz DDR3
    Graphics   Intel Iris Pro 1536 MB
    i also had the same problem with my 2012 Macbook pro 15.
    i have searched for an answer to this but i can't seem to find anything on the internet, i had uninstalled and reinstalled photoshop,  i have reset all of the tool preferences, and deleted all of photoshops preferences when that didn't do anything.
    any help would be very much appreciated
    thankyou
    Matty

    I'd start by checking the drivers for the trackpad are up to date if there are such things on a Mac.

  • 560 Ti twin FROZR II broken, help please :(

    Last night i was just on my desktop and the driver crashes, then it kept doing it numerous times you can hear the GPU fans speed up sometimes just before it conks out, i uninstalled the driver i was using and installed the latest but its still the same story driver crashes on desktop.
    I also installed a fresh windows 7 on a spare HDD, just to make sure its not the Operating system at fault.
    When i tried tried opening up C&C generals last night i got an error about a system halt i cant remember now because i was tired trying to fix it at like 3 am in the morning last night :(
    The thing is ive never had any problems with this cards till yesterday. Its the Factory OC'd 560 TI twinfrozr OC edition
    Perhaps it needs more voltage for its Factory OC??

    Quote from: Svet on 25-March-13, 00:33:45
    does it ever worked?
    have you checked the card cooling system?
    Oh yeah the card has worked for about 2 years perfectly, i think i bought it just when crysis 2 came out. Temps seem fine to me

  • PC Suite, Phone Update, now Broken, Help Please

    I guess the title says it all. I posted a similar topic in another forum with no response, I guess this is the correct place for it.
    In a nutshell, I had PC Suite working fine. Updated the phone software with the nokia software update tool. The next day, PC Suite is crashing, constantly.
    I am running Windows XP Pro SP3 on one machine, and Vista 64 (Ultimate 64 SP1). Both are legal copies and 100% up to date on security patches.
    I am running PC Suite 7.0.7.0.
    The phone (Nokia 6085) is running software
    V 06.01
    20-05-08
    RM-198
    (c)Nokia
    I have done very little in the way of trying to get around the problem, I went as far as to reinstall Nokia applications, I also tried removing the synchronization profiles.
    I connect by either Bluetooth or USB Cable, they both produce the same result.
    As soon as PC Suite sees the connected phone, it completes its current operation, then crashes.
    This seemed to work fine before updating the software on the phone, I had no issues at all.
    Is it normal that I should have to do some sort of cleaning and reinstall now that the software is updated?
    Has anyone seen some incompatibility with this new phone software?
    Any help would be greatly appreciated, on this most frustrating topic.
    Thanks in advance,

    Hi yes, thank you for some attention on this.
    Ok, first of all, I think I'm using a different version of the software than you are. I dont have a Phone item under settings in PC Suite, and I don't have a phone section on the settings toolbox of PC Suite. I'm using version 7.0.7.0 (actually I guess that depends on how you look at it, the about dialog reports 7.0.7.0, but the file meta data tells me, 7.0.41.9). This is the most recent version of the software downloaded from the website.
    OK, that out of the way, I have been able to sue communication center. It doesn't seem to be related. I have about 20 - 40 seconds after connecting the phone that the crashing occurs. In this time period, I may or may not be able to load the message center, depending on if the Synchronization Complete message shows up on the phone. Even at that, I have noticed that the communication center appears to work after the PC Suite crashes. Though I have not tested this extensively.
    I can provide any amount of details you require, though I'm uncertain what else I can provide. I haven't found a stack trace or anything like that.
    I have however noticed confserver.xml, which seems to map phone models to the functionality supported by that specific phone. I have also noticed that there are no definitions for my phone in that file, presumably it defaults to everything, or some default profile of (known services that work on most phones).
    I wonder what type of trouble I would get into if I were to attempt to add a definitions for my phone, and try to limit the functionality on it... I notice your tagged as Mobile Guru, perhaps you know how this file works?
    On a side note, the primary reason I want PC Suite to work is for deployment (from Net Beans)
    Thanks, and regarding troubleshooting, if there are any procedures you would like me to try, or know how to turn on verbose logging or something, I'm all for it.
    Thanks again,
    Mike

  • New SIM card = huge email headache HELP PLEASE

    A couple days ago the sim card in my phone went bad.  The friendly folks at my phone company replaced it with a new one free of charge (love that) while laughing that my old card hadn't even had 3G on it. It's nice to have the phone working again but I've got a problem I can't seem to solve.  Phone company said I had to contact BlackBerry, but I can't even figure out who I should be talking to on the endless menu options the voicemail has.
    When I got this phone 3 years ago it was set up with an email address [email protected]  Here's the problem.  When they replaced the SIM card the phone forgot the password for that email account...and since I hadn't had to remember it even once over the years I've NO idea what it was.  I tried all my logical usual ones to no avail.  Is there somewhere I can go to reset the password?  Everything I've found just has options for adding the email to the phone and require me to already have the password.  I'm at a loss and desperately need access to that email.
    Does anyone out there know how to either recover or reset the password?

    I always love when the phone company says you have to contact BlackBerry. They're actually your avenue to contacting BlackBerry.
    Let's hope that it was just the person that you were talking to that didn't know what to do. What you're going to want to do is call their tech support again and explain the situation to the person you speak to. As the carrier, they should have the correct tools to do this for you, but if they are unable, ask them to escalate the call to the next tier of support. These guys should have the tools, but if they don't they should be able to escalate you directly to RIM at that point.
    If you have any problems with that, let us know again and we can see if there is another way we might be able to get you some assistance.
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

Maybe you are looking for