XREF3 field is updating in GR/IR Mtl Clrg A/c but not in GR/IR Freight Clrg

Hi Experts,
When I run F.13 with selection of GR/IR accounts and with tick of GR/IR special purpose. only GR/IR Matrl Clearing account is clearing based on the XREF3 but GR/IR freight clearing is not happening, When i checked the MIRO document found that IR for the freight invoices is not updating with XREF3 field. Can i know what could be the reason and also the solution for it.
YJ

Hi, In PO if GR-Based IV is checked then XREF3 will get filled for the GR/IR Account item for the material, But for Freight condition item it will not be filled, If GR-Based IV is not set, then it will not get filled, It is SAP standard.
Check below link for making enhacement for your requirement,
[Field XREF3|http://forums.sdn.sap.com/thread.jspa?messageID=9764105#9764105]

Similar Messages

  • Just got a new MacMini.  Migrated files using Time Machine.  However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one.  How do I get rid of these updates?  They won't delete!

    Just got a new MacMini.  Migrated files using Time Machine.  However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one.  How do I get rid of these updates?  They won't delete!

    Only thing I can think of is trying this Lion trick...
    http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/

  • Updated iTunes to latest version can'tairplay music but not a rented movie, is there a fix for this?, updated iTunes to latest version can airplay music but not a rented movie, is there a fix for this?

    updated iTunes to latest version can'tairplay music but not a rented movie, is there a fix for this?, updated iTunes to latest version can airplay music but not a rented movie, is there a fix for this?

    Do you really mean the latest, as in 11.0.1?  That was supposed to include a fix for Airplay.

  • I doing update on iphone 4 it was taken 2hours but not instaled in iphone any suggestion

    i doing update on iphone 4 it was taken 2hours but not instaled in iphone any suggestion

    If you are not on ios 6 then don't bother - it's rubbish for the iphone 4! Treust me I have tried it and gone back to ios 5.1.1.

  • Applications not updating just show icon with line through it but not responding

    App Store shows 6 updates available.  Clicked on update all and now it is just in a frozen state.  The icons for the Apps are dim with the line that is traditionally there when updating, but nothing is happening.  If I click on the icons it say Unalbe to Download Application at this time.  I have checked and am able to update Apps on my iPhone but not iPad.  Any Ideas???

    Suzan-
    Are you able to access the internet using Safari?  If not, you may be having a problem with the iPad's WiFi connection.  Try unplugging the WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.
    If you are updating Apps from the App Store App on your iPad, you might also try updating by using iTunes on your computer.
    Fred

  • Task Updates By Team Members In Project Server 2013 but not reflects in MSP 100% completed

    Hi,
    My problem is related to Project Server & Project Professional 2013
    My scenario is like that Project Manager publish the project plan, and respective team member get their task. And Team Member is updated the task,then send to  the Project Manager for approval. Project Manager is approved the task. But, while opening my
    project in MSP 2013, it is not synced means, in msp it is not showing task 100% completed.
    Please solve this problem, I am waiting for your response.
    Thanks
    Saikat 
    Consultant

    Hi Guillaume,
    I have tried your procedure, but not get any solution.
    Yes, two errors are showing while opening in MSP like:
    1) The following job type failed to complete, Job Type -Load. Could not load project. Please try after sometime.
    <detail><ServerExecutionFault xmlns="http://Microsoft.Office.Project.Interfaces/" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Actor i:nil="true"/><LastError>1032</LastError><Message/><Source/><StackTrace/><TargetSite
    i:nil="true"/><ExceptionDetails><errinfo xmlns=""><general><class name="ProjectHasWriteLock"><error id="1030" name="ProjectHasWriteLock" uid="c9095c9e-cfbc-e411-940a-000c299e9fb7"/></class><class
    name="ProjectHasNoReadLock"><error id="1032" name="ProjectHasNoReadLock" uid="ca095c9e-cfbc-e411-940a-000c299e9fb7"/></class></general></errinfo></ExceptionDetails></ServerExecutionFault></detail>
    2) Second error are showing in Queue like "Skipped for Optimization" and "Failed But Not Blocking Corelation"
    Please give me the ultimate solution to solve this.
    Thanks and Regards
    Saikat
    Consultant.

  • After updating to iOS 5 email accounts will receive but not send

    After updating to iOS 5, email accounts will receive but will not send.  Have made sure my SMTP is correct and are turned on.  Any suggestions?

    Actually, I resolved this by going to the list of servers and selected the same server from the 'Other SMTP Server' category (which happened to be the same server as the primary server) and can now email.

  • HT1600 Cannot get air play mirror option.  Updated Apple TV and have air play option, but not mirror.  Any suggestions?

    Cannot get AirPlay Mirror option to work on my Iphone.  Updated Apple TV and IPhone.  I only see the airplay app button, but not the mirror on/off toggle.  Any suggestions?

    AirPlay: iOS and Mac

  • My ipad 2 just show itunes n usb logo at screen after update ios8.1.2.It just freeze there.but not happening to my ipad air n ipad mini!!!what to do?i dont wanna lose any data on it.

    My ipad 2 just show itunes n usb logo at screen after update ios8.1.2.It just freeze there.But it not happening to my ipad air n ipad mini!!!what to do?i dont wanna lose any data on it.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I need to reset my Apple ID on my ipad.  My internet provider was bought by another company, so my user name changed.  So now, when I go into itunes or the app store, I cannot update anything because it asks for my password, but not my apple id.

    My internet provider changed, so my username changed.  I need to be able to reset my appleid NOT my password.  I can't find a way to do this.  Here is a scenario.  I want to go into the app store to update apps, so a box pops up asking for my password, but shows my appleid as the old name.  I have reset the appleid on my mac and itunes at home and works there, but when I try to go into things on the ipad, it automatically comes up with a window asking for my password, but for my old id name.  I went to the manage your id section, but it won't let me in because it wants the password to the old name.  So I think I need to reregister the ipad with my new userid.  Icloud, Itunes, app store, everything like that won't let me in because they still show the user id as the old name.

    On the iPad - go to Settings>iTunes and App Stores>Apple ID. Tap on your old ID and sign out. Then sign in with your changed/new ID.

  • Updating RE: License Agreement needs to be accepted, but not an admin

    Hi all,
    I deploy the Java RE to a number of Windows XP clients via wpkg (http://wpkg.org/Java#JRE_without_Java_Quick_Starter_on_32-bit_hosts) because an Java Web Start application named EGVP [1] should be used on the clients. The author of this application says that it has to be installed (i. e. started once) with administrative privileges, what I've done (manually) and all works fine.
    A problem occurs when wpkg updates the Java RE (e. g. from 1.6.19 to 1.6.20 this week): If the "normal" user without admin privileges starts its EGVP application after the update is performed, he/she is asked to accept the license agreement from Sun/Oracle for the Java RE. If you click on "Yes" there, an error message says that it needs administrative rights to save the changes?!
    As a quick&dirty workaround, I changed the folder security permissions for \Program Files\Java\jre6 so that the user group has full access to it, this solves the problem temporarily, but is not a real solution, I guess ;-) Furthermore, the next Java RE update via wpkg removes and re-creates the folder by uninstalling the old and installing the new Java version, so that my permissions are lost then (thankfully, it should not be a permanent condition).
    So my question is: Has any of you a similar problem or any idea how to solve this? I could try to set the folder permissions after an update via wpkg, too, but I don't think that's a good idea.
    I hope that any of you has an idea how to deal with this!
    Thanks in advance,
    -Phil
    [1] http://www.egvp.de/ -> Downloads -> EGVP Client Software

    Hi Mono
    Have a look at this discussion
    Matthew Whiting

  • Ipad air not updating yahoo email,stopped last sunday,will send but not recieve

    YAhoo mail stopped updating and recieving last sunday,have reset,and deleted acct numerous times still shows updated sunday on mail page

    Hi Dealsvr,
    It seems you are having issues with email on your iPad. I have located an article that may help you resolve the problem:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • How to update OS 10.7.5 to 10.8 but not 10.9?

    OS 10.8 is no longer listed for purchase in the Apple store.
    I wanted to first update from to 10.8 without jumping to 10.9

    Call Apple Store.  1-800-692-7753
    They will email you a redemption code and that can be used to purchase
    OS X 10.8 Mountain Lion.
    Get the relevant download info from them.
    Best.

  • Updating record that exist in master data target but not master data sourc

    HI,
    I have PLANT key value "0004" that exist in my master data target ZPLANT, but this value has never sended by my source system, it was added only when I loaded my Infoprovider.
    My problem is that  this key value "0004" haven't text, and I would like put automatiquely the text of another value '0005' for this value '0004'.
    I'm in BI7 for information.
    Do you have any idea please? ABAP, Start routine or End routine?
    Andcould you give me please the ABAP code to do that?
    Radj.

    Thank you for your answer, but the source system doesn't contain the value '0004'.
    Can'I add this value while loading ZPLANT master data from source system?
    If yes, How can'I do it, and How can I maitain (automatiquely not manually) the text of '0004' key value?
    PS:
    The text of '0004' key value is the same as the text of '0005' key value'.
    Thank you.
    Radj.
    Edited by: Radjech Radjech on Jul 26, 2009 8:53 AM

  • Since update have lost firefox browsing , google is searching but not as good

    when I searched old firefox they would come up with browsing history , but since google is searching not so good, can I get firefox to search again thanks

    thanks for your reply I did what you suggested dowloading and reinstalling but didnt make any difference, any further sugg estions pleasde

Maybe you are looking for