SAP R/3 4.6 B Support pack level for AIX 5.2
Hi,
We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
SAP_BASIS 46B 0054 SAPKB46B54
SAP_ABA 46B 0054 SAPKA46B54
SAP_APPL 46B 0054 SAPKH46B54
SAP_HR 46B 0000 -
ST-PI 2005_1_46B 0003 SAPKITLQC3
Please request the feedback.
Thanks & Regards,
Narayana Murthy.
Do we apply any support pack to the system after O.S upgrade ?
( Correction for the below posted mail)
Similar Messages
-
Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007
What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
Regards,
Rajesh Banka>
Rajesh Banka wrote:
> What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
>
> Regards,
> Rajesh Banka
Hi Rajesh,
Please see the note '833438', it explains which pack is required in this scenario.
"You cannont connect ERP (R/3) releases lower than 4.6C to CRM 5.0.
All subsequent CRM releases (5.0 or higher) cannot be connected to ERP lower
than (R/3) 4.6C.
These types of system landscapes are not supported by SAP.
If you are using CRM 5.0, you must have implemented Plug-in PI 2004.1
Support Package 10 and, provided you have Basis Release 620 or higher, you
must import PI_BASIS 2005.1 in R/3. --> After you have imported these
plug-ins"
Thanks,
Nitin Sharma -
Suggested Support Pack Level for ECC 6.0 Upgrade - Target
Hi ,
Can someone give us the suggested support pack level for the ECC 6.0 system after the upgrade.
Our current patch level is:
SAP_ABA 700 0012 SAPKA70012
SAP_BASIS 700 0012 SAPKB70012
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C
ST-PI 2005_1_700 0003 SAPKITLQI3
SAP_BW 700 0014 SAPKW70014
SAP_AP 700 0009 SAPKNA7009
SAP_APPL 600 0010 SAPKH60010
SAP_HR 600 0013 SAPKE60013
EA-IPPE 400 0008 SAPKGPID08
EA-APPL 600 0008 SAPKGPAD08
EA-DFPS 600 0008 SAPKGPDD08
EA-FINSERV 600 0008 SAPKGPFD08
EA-GLTRADE 600 0008 SAPKGPGD08
EA-HR 600 0013 SAPKGPHD13
EA-PS 600 0008 SAPKGPPD08
EA-RETAIL 600 0008 SAPKGPRD08
FINBASIS 600 0008 SAPK-60008INFINBASIS
ECC-DIMP 600 0008 SAPK-60008INECCDIMP
ERECRUIT 600 0008 SAPK-60008INERECRUIT
FI-CA 600 0008 SAPK-60008INFICA
FI-CAX 600 0008 SAPK-60008INFICAX
INSURANCE 600 0008 SAPK-60008ININSURANC
IS-CWM 600 0008 SAPK-60008INISCWM
IS-H 600 0008 SAPK-60008INISH
IS-M 600 0008 SAPK-60008INISM
SEM-BW 600 0008 SAPKGS6008
IS-OIL 600 0008 SAPK-60008INISOIL
IS-PS-CA 600 0008 SAPK-60008INISPSCA
IS-UT 600 0008 SAPK-60008INISUT
LSOFE 600 0008 SAPK-60008INLSOFE
IRMIPM 30B 0005 SAPK-30BI7INIRM
IRMGLB 30B 0005 SAPK-30BG7INIRM
ST-A/PI 01K_ECC600 0000 -
GSCDMC 600 0001 SAPK-60001INGSCDMC
RCMGT 601 0001 SAPK-60101INRCMGT
Thanks
SenthilHi Senthil,
of course it is always recommended to use the newest Support Package Stack,
but if your system (your business processes) are working fine, I would recommend you to
import support package only then when you have an error or you want to have a special fiunctionality.
Some customers play support packages into the system only twice a year, because the business processes
should be tested after the sp import.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA -
Support Pack level for upgrade
Hi All,
We are upgrading from R/3 4.7 to ECC 6.0, can anybody provide me Support Pack level for SAP_ABA, SAP_BASIS etc. before starting upgrade.
I have gone through lot of OSS notes but not getting exact SP level.
Regards,
SachinI depends on
- what upgrade package you use (SR1, SR2, SR3)
- the SP level of the source system
The upgrade guide tells you the minimum SP level needed to do the upgrade.
If you use the new CD/DVD set, the system will be upgraded to SP 12 (BASIS, ABA, SAP_APPL).
If you backup your wage tables before the upgrade (as described in the installation guide) you can also go to the highes SP level for SAP_HR.
Markus -
Support Pack Level Upgrade in BI 7.0
Hi all,
Can anyone let me know what are the possible issues that would occur after upgrading support pack level in BI 7.0.
As far as I know a BI consultant would participate in the upgrade activities like BI objects check, SPAU, query check, etc. Can anyone let me know if there are are any other activities to be performed.
I would appreciate your help.
Thanks,
Sunny.Hi
There is any customer specific development done by SAP in the previous system. If so, the time to act is just after the pre upgrade study only. The customer would only want to retain the customer specific module developed by SAP. We need to get SAPu2019s intervention in the project before we start the upgrade. SAP would develop certain patches to be run on the previous system to capture all the customer specific development and then they would run some patches on ECC system u2013 this would release the customer specific development in the new system (ECC./BI). This is a very crucial and important check of the step. If not taken care of at the proper time, it might hamper the Customer Specific development on the new system.
It is to be assured that the new system is at the latest stack level for ABAP, XI, BI etc before we start the SPDD and SPAU phase
Only one request is to be made for SPDD. For SPAU too, only one request should be made.
Previous system sandbox should be available for reference during the entire upgrade project and should not be scrapped before the Go Live.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304b9de6-f84f-2b10-94af-e5ff7461c18c
http://www.thespot4sap.com/upgrade_guide_v2.pdf
Hope it helps. -
How to check for the prerequisite Support pack level
We are planning to upgrade from 4.7 to ECC6..How can check ,what is minimum support pack level that needs to be maintained in 4.7 for the upgrdade to ECC6.
Can i check this in Servrice markrt place .if so please let me know where to check
ThanksHello,
I am sure you will find relevant information in the link below.
https://websmp207.sap-ag.de/upgrade
Regards,
Manoj Chintawar -
Setup SM 4.0 to allow me to approve support packs/stacks for download
I need a doc or a procedure to setup Solution Manager for approving support packs/stacks for download. I havn't had much luck finding a good one.
Have you configured Maintenance Optimizer , if not use the following link to see the documentation for configuring MOPZ
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689877&
From the above link click on <b>SAP Tutor on Maintenance Optimizer</b> this will show you how to use Maintenance optimizer and <b>Step by Step Configuration of Maintenance Optimizer SP Stack 09</b> will help you to configure Maintenance Optimizer. ( scroll down to bottom to see the links)
Thanks
Prince Jose -
Support Pack Upgrade for APO 5.0
Hi Guys,
Can anyone update me on what needs to be done from the functional side if we upgrade the Support pack level.
We are upgrading from Support Pack 11 to 16 and are currently in APO 5.0. What precautions and updates we need to do for the same. I would appreciate if some step wise process can be defined, for this. Also would like to know the difference between SPK 16 and 17.
Thanks,
HarshHello Harsh,
Have you checked the Release & Upgrade Info section in the SAP Service portal (service.sap.com). This containa ample information on this.
Thanks,
Mahesh -
Support pack level issue in Standard Finance Program.
Hi Everyone,
i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist. Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
Thanks&Regards,
SivaHi Siva,
Your query is obsolutely acceptable...
After supportpack update some times database will not be synchronised with the new updates.
and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
Regards,
Srini -
Upgrade to CRM 2007: minumun service pack level for other components
Hi all,
I have to upgrade my CRM 5.0 to CRM 2007. CRM is connected to ECC 6.0 and SCM 5.0. What are the minimum SP level for those component? Is there any link to documentations about mandatory SP for not CRM components?
Thanks a lot.Hello
In the CRM 2007 Master Guide which is available in the [SAP Service Marketplace|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000704565&] I found that SAP ERP 6.0 EHP 3 is recomended and SAP R/3 4.6C SP 53 is the minimum version. No special version is mentioned for SCM 5.0.
Best regards
Gregor -
Support pack 12 for solution manager 4.0
Hi,
We are on Patch level 10 and want to go to 12 on solution manager 4.0. do we need to download the patches from service market place or do we need to use the maintenance optimizer in DSWP. if so I don't see any solution manager except the satelliate systems.
Some one please let me know?
Thanks,
ChanderYou need both
You Solution Manager needs to be added as system in SMSY so you will see it in Maintenance Optimizer.
The other way of downloading patches is, step to http://service.sap.com/patches, use the "Support Stack" entry, select all and put all to the download basket. Then use any system that you have in MO and "confirm" the basket and then cancel the whole procedure. Your items will be confirmed and you can download them with the Download Manager.
Markus -
Hi experts, we are running a federated portal network, between our BI Portal with a ABAP daat source and our EP Portal which is your standard ldap data source. We are looking at implementing ESS MSS or XSS into our portal landscape.
I understand from SAP that i will need to install SP21 onto our portal systems to get the XSS business packages. But our BI team are dragging there heels about wanting to upgarde the BI Portal. I understand that the xss implementation creates a second node in a federated portal network that you will derive all your content from.
What are the implications/problems we may have if we upgarde our EP Portal to SP21 but leave our BI Portal on SP19 or 20??
Will it still work, connectivity wise and RDL wise?? Or will it just corrupt the whole thing???The best possible scenario is to have the consumer and all the producer portals on the same version and SP level. However, this might not be possible to maintain at all times in landscapes were you have multiple producer portals.
Should you have a version difference, the general recommendation is to have your consumer portal at a higher SP level than your producers. All the portals should be on 7.0 version.
Please see the following link and SAP note 1295662 for more information on version Interoperability in FPN:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/45/76322bf0020dece10000000a11466f/frameset.htm
Thanks,
Shanti -
Service Pack Level for IDM 7.2
Dear All,
I have installed a IdM 7.2 in a windows server. I am creating a document for our organization. I came across of a question on how will I able to know what SP Level does my IdM is. I tried searching and checking in the Identity Center > About Identity Center I was able to see System Info. But once I click the System Info button I am receiving an error "System Information is Unavailable at this time".
I also checked already in the usr files of the installation but wasnt able to see any logs in the files.
Does anyone know any other steps on how to check SP Level?
Thank you in advance.
Regards,
SantiHi Santi,
Assumption: SAP IDM 7.2 version
You can find the runtime version by checking the dispatcher node.
Designtime version can be found in Identity center node.
Kind regards,
Jai -
Need to know ,how SAP is Posting wrong Enrtry at the Table level for Same .
Hello SAP Experts ,
Good Morning Gems!!!
I have a Typical Issue here , SAP Is Posting In wrong tables
. Production is currently processed everything that it should process. This works as designed.
PO = 7800507594 (From Plant 5400 to Plant 5409 - only NL, no intercompany)
Dlvry = 81243277 (Has PGI but no Invoice, as it is the same company code!!!
The issue is that for some reason, SAP has put an entry into table VKDFS by mistake. This table is used by SAP to determine the list in VF04. This is why VF04 thinks it should create an invoice, but it should not. so we are getting error message that the Invoice cannot be created , which is valid, and a good thing.
Do we have OSS for 2 things:
1) A note that mentions why it is determining the wrong CoCode or Sales Area which leads to the entry into this table
This is to stop it from adding entries incorrectly.
2) A note that mentions how to fix the existing entries in this table that should not be there?
Awarded Full Points for the Correct answer
Thansk and Regards
Adarsh Srivastava
Supply Chain Consultant ,
CSC INDIADear Friend,
I guess you item category in Delivery Document would be NLN.
Go to VOV7 & under Business Data there is a check box for Billing Relevance. This box should be blank. I mean if there is any entry in this box (either A or J) then remove it & make it blank.
Hope this helps...
Thanks,
Jignesh Metha -
Support Packs in Solution manager
Hi,
I have a query, when I am going to select patches through maintenance optimizer for solution manager I can see the source and target stack level at SMP and when I am putting the source stack(17) and the target stack as latest, solution manager 7.0 EHP 1-23 and going further for download it shows the support packs corresponding to release 701 but not to 700, as my current support pack level for solman is 16(release 700) and I can see there are support pack level up to 21 for release 700, I am confused why it is not taking account the remaining patches for 700 or can I switch directly to 701 and apply the support packs corresponding to release 701.
Regards,
MridulDear Mirdul,
Check SAP note 1169247. In which it is mentioned that:
ABAP stack requirements
You can start the SAINT update from any Solution Manager 7.0 ABAP Stack.
Java stack requirements
A direct JSPM update to Solution Manager 7.0 Java Stack 18 and higher is not possible from some of the Java stacks. Therefore, proceed as follows: First, use the JSPM update to update the Java stack only to Solution Manager 7.0 Java stack 17 and then update to the relevant Solution Manager 7.0 Enhancement Package 1 Java stack.
Take the numbering into account: Solution Manager 7.0 Java stack 17 contains NetWeaver 7.0 Java stack 16.
Also, check point number 5 in that.
I think now it will be clear.
Thanks
Sunny
Edited by: Sunny Pahuja on May 13, 2010 6:10 PM
Maybe you are looking for
-
[Solved]Installing Jedi Knight Dark Forces II w/o optical drive
This guide assumes that you already have access to the Jedi Knight Dark Forces II disc isos. If you don't and you want help making them then... send me an email... I guess, and I'll explain how to make them. (I may edit this post later with the det
-
Is there anyway I can contact skype by phone or email? I need them to contact me otherwise. I signed in for Premium, got an email saying that my billing had gone wrong, I went through the payment again, and suddently I received emails with the conf
-
Since 10.1.2.0.2 is not released for HP-UX, is it possible to develop forms and reports on 10.1.2.0.2 on Windows and then deploy them with 9.0.4 on HP-UX? If not, when will 10.1.2.0.2 be available on HP-UX? We don't want to do two migrations.
-
Best method to execute a command on a remote machine?
I am currently using runtime.exec to execute commands on the machine where my java gui is running. What I would like to do is to execute the programs on a remote networked machine. What should I be looking at? creating sockets, using rmi? eventually
-
Working with 2 displays problem
Hi , my system is :MacMini i7 , osx 10.9.3 I work with 2 displys one is via HDMI the other with mini disply port . the problem is : i use the 2 displys as a deferent viewers not as a mirror displays . BUT i can see all my programs in the bottom of th