XSteps based Control Receipe (PI_CRST) failed

Hello Experts,
When I complete the XSteps based PI Sheet in CO60 the process message 'PI_CRST' is failed with error message "Control Recipe destination not available in process order". Can any one help me with this?
with best regards
K. Mohan Reddy

Hello Mohan,
You need to look at a couple of things to find the root cause of this issue.
1. Have you configured the control recipe destination in the XStep tree? - This can be done under the destinations tab at the root level. Even if you do not include the destination for the children XSteps of the root, it will flow from the top but never the other way round.
2. Check the destinations you are using for the process message category PI_CRST. In an XStep scenario, you should be using :
PI02 Type: 01 Destination Address: COCI_CONFIRM_CONTROL_RECIPE
PI09 Type: 01 Destination Address: COCI_CONF_CNTRL_REC_TO_PO_XS
Regards,
Mudit

Similar Messages

Error encountered in Rapid clone (control file creation failed)

hi all,
i have 2- node ERP server running EBS 11.5.10 with database 9.2.0.5 and OS HP UX 11.11
while running perl adcfgclone.pl dbTier
i encountered the following error
Verifying correctness of adcrdbclone.sql
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00116: Error while reading dbf files. Control file creation will fail.
an later part of log file
Creating the control file for DVP_test database ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 598700552 bytes
Fixed Size          737800 bytes
Variable Size          419430400 bytes
Database Buffers     167772160 bytes
Redo Buffers          10760192 bytes
Control file created.
Database altered.
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp001.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp002.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp003.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp004.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp005.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp006.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
but when i query v$tablespace it shows temporary tablespace is TEMP not temp1
even on my production system the TEMPORARy Tablespace is TEMP
when i see the alert file
it says
Tablespace 'TEMP' #2 found in data dictionary,
but not in the controlfile. Adding to controlfile.
File #143 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00143' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #144 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00144' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #145 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00145' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #146 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00146' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #147 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00147' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #148 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00148' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #149 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00149' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #150 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00150' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #151 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00151' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #152 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00152' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #153 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00153' in the controlfile.
This file can no longer be recovered so it must be dropped.
how can i come out though this confusion??

i have opened the database but what about the next porcess now
Beginning database tier Apply - Sun Jan 11 17:31:13 2009
Log file located at /oradvp/ora/proddb/9.2.0/appsutil/log/DVP_test/ApplyDBTier_01110531.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
logfile says
Checking for errors ...
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00376: file 148 cannot be read at this time
ORA-01111: name for data file 148 is unknown - rename to correct file
ORA-01110: data file 148: '/oradvp/ora/proddb/9.2.0/dbs/MISSING00148'
ORA-00600: internal error code, arguments: [1236], [], [], [], [], [], [], []
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:30:01 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : khannapaper.com
sDbPort : 1528
sDbSid : DVP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.khannapaper.com:1528:DVP
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP.khannapaper.com)))
Exception occurred: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514)(EMFI=4))))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:469)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:314)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:290)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:131)
     at java.lang.reflect.Constructor.newInstance(Native Method)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
     at java.lang.Thread.run(Unknown Source)
and why does it shows temporary tablespace TEMP1
but in real it is TEMP
i dropped around 50 days back from production and added TEMP to it

Control file creation failed while installing ---------R12 release 3

While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
•     glibc-2.3.4-2.25
•     glibc-common-2.3.4-2.25
•     binutils-2.15.92.0.2-21
•     compat-libstdc++-296-2.96-132.7.2
•     gcc-3.4.6-3
•     gcc-c++-3.4.6-3
•     libgcc-3.4.6-3
•     libstdc++-3.4.6-3
•     libstdc++-devel-3.4.6-3
•     openmotif21-2.1.30-11.RHEL4.6**
•     pdksh-5.2.14-30.3
•     setarch-1.6-1
•     make-3.80-6.EL4
•     gnome-libs-1.4.1.2.90-44.1
•     sysstat-5.0.5-11.rhel4
•     compat-db-4.1.25-9
•     control-center-2.8.0-12.rhel4.5
•     xscreensaver-4.18-5.rhel4.11
•     libaio-0.3.105-2
•     libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
     ... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
Amol

promptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found

RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail

Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
Sasikala

Hi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed Cannot execute configure of database using RapidClone

dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

dear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed

There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
                     Copyright (c) 2011 Oracle Corporation
                        Redwood Shores, California, USA
                        Oracle E-Business Suite Rapid Clone
                                 Version 12.2
                      adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar   oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone   -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\     50% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj

Transaction based control for GL Master in FI

Hi:
I request for config. steps for transaction based control of GL master date. e.g. If data is entered in GL master a/c in currency or sort key field, and if after entry the field is to changed to display mode, only for this particular account, how this can be done.
Thanking you.
Ajay

Hi
Th evalidation should be at the source is the Purchase Order. I beleive it is standard SAP Config to put the validation there. So once the PO has been created with the correct account assignments the GR and IR will be correct.

Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-Walt

Yes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt

Control receipe and PI sheet

Dear Experts
Can u guide me what is purpose of creating control receipe and PI sheet in system.
also plz tell me step by step config and creation of both with T code.

Dear,
Master recipe will contain the Resources to be used and the duration of the process.
Process order will generate control recipe. Control contains process Instructions.While creating / Releasing the process order control recipe will be created.
PI Sheet: Process Instructions can be attached to the Master Recipe. Process Instructions assigned in master recipe will generate control recipe. PI Sheets in PP-PI offer a lot of functionality to streamline a manufacturing process
For details steps please refer this link,
[Step in PP-PI|Re: PI sheet & Controll recipe]
Regards,
R.Brahmankar

Token-based server access validation failed with an infrastructure error

Hi
We have a new Win 2008 Enterprise x64 server running SQL 2008
When we try to connect to the server using Windows Authentication, from a user account which is a domain administrator, we get the following message:
"Token-based server access validation failed with an infrastructure error"
What needs to be configured here for this to work ?
Thanks
Bruce

Hi,
I am encountering the same error message but it is more around the login, this problem happens only on one server but it is fine on another three, my investigation show it is a ghost SID associated with AD user account
Background
    1- An Active Directory (AD) account was created for a user [Domain\UserA]
    2- A SQL login was created for the account above and then granted access to a number of databases
    3- The AD account was renamed/modified to [Domain\UserB]
    At this stage the user would encounter an error when connecting to the server
    The sql log show this error message
    Error: 18456, Severity: 14, State: 11.
    Message
    Login failed for user 'domain\user'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors.     [CLIENT: xxx]
Action on Server 1 SQL (the one with the problem)
    1- Dropped the user from the databases
    2- Re-Created the login from the windows account [Domain\UserB]
    3- Created the user in the respective databases
    But the user still unable to connect to the server
Investigation
    On server 1, the SID of the user in SYSUSERS was Matching SYSLOGINS and matches with result of SUSER_SID(Domain\UserA)
    But it does not match the SID in the AD
    The rest of the servers all have the correct SIDs
    When I use SUSER_SNAME(Incorrect-Sid) and SUSER_SNAME(Correct-Sid) on this server they both return [Domain\UserB]
    The problematic server is always returning the incorrect SID when recreating the user login and when using SUSER_SID(Domain\UserA) as if it is cached somewhere.
I can't specify the SID when creating the SQL login because it is using the Windows account
Your ideas on how to fix this problem are much appreciated
Regards,
DGL

ORA-00245: control file backup failed; target is likely on a local file sys

Hello,
our RAC (Linux, 11.2.0.3.0) is rather new and we are still on gaining experiences with that system...
When starting the backup with RMAN we are getting the following error:
Starting Control File and SPFILE Autobackup at 04-JUL-12
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 07/04/2012 16:41:48
ORA-00245: control file backup failed; target is likely on a local file system
The reason for the error is clear ORA-00245 - in a RAC environment the location of the Snapshot Controlfile must be on a shared location.
When executing the RMAN command "show all" on each node, we are getting
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD021.f'; # default
for node #1
and
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD022.f'; # default
for node #2
When using a shared location for the Snapshot Controlfile do we still need to setup 2 different names for that file?
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/<shared location>/snapcf_PROD021.f'; # default
for node #1 and
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/<shared location>/snapcf_PROD022.f'; # default
for node #2
Or should we configure just one Snapshot Controlfile?
The RMAN setup for "CONFIGURE SNAPSHOT CONTROLFILE NAME TO..." must be changed on both nodes - correct?
Hopefully my question is clear enough - any help will be appreciated.
Rgds
JH
Edited by: VivaLaVida on 05.07.2012 11:41

No, it must be configured on a shared storage:Not really required, i've RAC setup and snapshot is configured on local storage.
Configuring the RMAN Snapshot Control File Location
The snapshot control file is a copy of a database control file created in an operating system-specific location by Recovery Manager. RMAN creates the snapshot control file so that it has a consistent version of a control file to use when either resynchronizing the recovery catalog or backing up the control file. In Oracle RAC, the snapshot control file is only needed on the nodes on which RMAN performs backups; the snapshot control file does not need to be globally available to all instances in an Oracle RAC environment.
See below from doc.
http://docs.oracle.com/cd/B28359_01/rac.111/b28254/rman.htm#i455026

Why does a motion control unit constantly fail during config

Why does a drive fail during config.... I am trying to control a machine using faulhaber motors (5 of them) with faulhaber controls, one drive fails during config (fatally fails) and it is not wired any different to any of the others... even with only 24v supply, it dies... Blue screen and restart of pc... the others all worked perfectly, with no fault. The process we are using for the troublesome drive is exactly the same... We are stuck, can anyone please help?

thank you, but faulhaber are all on holiday, and I am really struggling..... tis only one unit and only when it is positioned in one place... checked all electrical connections, no shorts, no loose wires, even fails when just power and serial connected.... so not even motor problem.....

Control receipe creation in process order

Hi,
Can you please tell me how to create control receipe.
After releasing the process order when I select the button for creating control receipe. System shows error as " No control receipe generated"
Please tell me the basic steps required to create control receipe and PI sheet.
Regards
Karthikeyan

Hi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
In Process order
Goto->List->Control Recipe List--->
As per above link first find out Control Recipe is generated or not and also find out its status.
If Status is Created then you can find it in CO53,
if status is Sent then you can find it in CO55 or CO60
Please rfer this thread also,
https://forums.sdn.sap.com/click.jspa?searchID=16154042&messageID=5839678
Regards,
R.Brahmankar

Failed Logins - Token Based Server Access Validation Failed

Hi All-
I am trying to track down, well for lack of a better word (an annoyance). I have a VM running a proprietary utility (VMware update manager) that connects to a remote SQL VM. This connection is via a service account that from the surface has the
appropriate permissions. The setup and utility has been in and is working as it should. However in our logs we are constantly seeing.
SQL Event Viewer - Login failed for DOMAIN/REMOTESERVERNAME$ Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors [CLIENT: REMOTEIP OF REMOTESERVERNAME]
Then in the SQL Logs I am seeing the same error and also - ERROR 18546, Severity 14, State 11
I have read dozens of threads - pointing to UAC. I have elevated SSMS via UAC and allowed it to run as administrator. Also ran as admin, and reapplied the permissions to that service account, db_owner
What I have read is about AD/user account. However in this case I am seeing the remote server name, not service account. Got me thinking a service is running as network or local system, and phoning home to SQL. However everything I see
is using the service account for that utility. Also in the event viewer in the security portion for that same time, I see the login and log off as successful. Could anyone try to point me in the right direction, without flat out adding the servername
to the local SQL VM administrators group.
Thank you in advance for any assistance.

Rather than adding the machine account to the admin group, you could do:
GRANT CONNECT TO [Domain\Remoteservername$]
And then you could set up a logon trigger that captures information about the login. That would include app_name() as well as the Windows process id. This could help you track exactly which process that is knocking on the door.
Erland Sommarskog, SQL Server MVP, [email protected]

Touch devices - list-based control scroll and drag distinction

Hi,
I am wondering how Flex is able to distinct between a touch scroll of a list-based control and a touch drag event of an item in the list on a touch enabled device.
Unfortunately I am not able to test this issue here right now, since I have no touch device running AIR 2 or Flash 10.1.
In my application, I have a number of DataGrids. On touch devices, I want the user to be able to scroll the list without using the thin scroll bars, but also want to enable him/her to drag list items.
Anybody out there with an idea?
Thank you
LLD

Welcome to the discussions, JCEIV!
Just a few pointers that may help:
AirPort Utility 5.5.2 is the latest version of that application. Is the AirPort Extreme running 7.5.2 firmware?
Did you connect an ethernet cable from your computer to one of the LAN <-> ports to make the configuration changes on the AirPort Extreme? +I just don't trust wireless for any type of important configuration changes or settings+, but you may disagree.
After you update the AirPort Extreme, you can disconnect the ethernet cable and move back to wireless.
If the AirPort Extreme does not restart correctly when you update it, you may need to perform a Factory Default Reset to clear out any old and possibly corrupt settings. It's a hassle to have to reconfigure everything and reenter all the data, but I know of no other shortcuts.

XSteps based Control Receipe (PI_CRST) failed

Similar Messages

Maybe you are looking for