Y Alphanumeric Fields on right of a field are * when 'AT NEW 'is used.

can anybody tell me l y SAP makes all other fields on right
of a field used in AT NEW are made to *****?

This is due do internal handling during the AT NEW statement, for me it is still a mystery why this happens and why it hasn't been fixed. To get around it is quite easy. Just use a work area.
data: itab type table of ttab with header line.
data: xtab type ttab.
Loop at itab.
     xtab = itab.
     at new fld1.
        write:/ xtab-fld1, xtab-fld2, xtab-fld3, xtab-fld4.
     endat.
endloop.
Regards,
Rich Heilman

Similar Messages

Appleworks Database cut off data on right side of field?

Help!! I am working with Appleworks 6.2.9 on a G4 PowerBook running OS 10.3.4. I have created a database that prints a 5-6 sentence summary of each of my lessons. When I print this layout, it cuts off the right hand side of the field. The last 2 letter on each line are missing. The layout looks fine on the computer. It is not the end of the page. It prints other things to the right of the field. It just cuts off the text in a particular field.

Hello
Have you tried to replace the font as written in my late post ?
You may also try to check the checkbox:
AppleWorks > Preferences > General > Text > Fractional Characters Widths
This may have an impact on the way characters are displayed.
Remember, since the delivery of Tiger, some details are odd in the way AppleWorks items are displaye because internal treatment is always based on Quickdraw rendering but it is really done with Quartz. It seems that this may give odd results for strings's lengths.
Differences are quite invisible with many fonts but are visible with some ones.
Yvan KOENIG (from FRANCE mercredi 23 novembre 2005 14:59:58)

I Cannot seem to type spaces in a right aligned form field

Well, that's not quite true, spaces can be added , but only after entering the text. For example, if I type 3456 Taylor Ave., what I get is 3456TaylorAve, and then I have to go back in and enter the spaces. Since this form will be used by numerous employees and sent out to customers, I am afried this will result in lots of unprofessional looking documents. Does anyone know of a setting I should be turning on to correct this? It only happens in form fields with right-alined text.
I'm working in OSX 10.5.8 in Acrobat CS3.
Thanks in advance!

Here is the screen grab - I show the field text as I entered it on top, then an edited version on the bottom where I manually added the spaces after entering the text.
Thanks.

Error message display location on field at right

In apex 4.1.1 it's posible to place the inline error message on field at right instead of the label?

RideTheStorm wrote:
In apex 4.1.1 it's posible to place the inline error message on field at right instead of the label?No. Because its attached to the item label.
Edit your item label template and go to Error Display Section.
See Inline Error Display

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Having problems when adding new Curency value field + currency field.

I need to add a new Currency field (CURR, length 15, 2 decimal places) plus the Currency field itself to a view.
I'm really struggerling. I have looked at the existing SAP fields in the Component workbench and I have to admit I can not see how a field is linked/related to the currency itself. Is this link established purlely at the disctionary level?.
Has anyone added their own Z field value and Z currency field before. I can create both fields and display them, but what I can not work out is how I related them within the component workbench, or is this done from the dictionary?.
Any help would be greatly appreciated.
I should have been able to look at an existing SAP example and work out how it's done, but so far I can not see/determine how this is achieved, even though someone has mentioned that it's controlled via the GET_I_field method. Looking at this method I was expecting to see some mention of both the Currency value field and the Currency field. But as I don't see these confusion reigns.
Jason

That's correct, but am I right in thinking that you can't actually create the currency key field itself?.
I am aware that currency value fields can be created which reference a currency key field, but can see nothing that allows me to create a currency key field to be referenced.
I hope that makes sense.
Also, I have amended the structure, changing my value fields from Decimal 15,2 to Currency 15,2 and have created a new currency key field in the structure and referenced this from the Currency value field.
Witin the Component/view/context node I can see this new currency key field, but it appears as STRUCT.fieldlabel whereas my currency value field appears in the context node as EXT.fieldlabel, because it was created in the AET.
My problem is that when attempting to add the currency key field onto the screen I don't have it to select from within the list of structures/attributes. All the others attributes in the context node seem to be there, except the new currency key field/attribute.
The attribute has a SET_fieldlabel, GET_fieldlabel, GET_M_Fieldlabel and a GET_I_Fieldlabel, which I believe is all that should be required.
Does anyone know what my problem could be?.
Jason

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.

I think it has something to do with the way the value of the check box is exported, but I'm not sure. With nothing being exported to Data5, Data6 displays the sum of Data1-4 rounded down to the nearest whole number and updates automatically as Data1-4 are updated.
Right now, assuming Data1-4 are 0, where data 5 is the output of the second example and any box is checked, "1" is displayed in data5 but nothing is added to data 6. Selecting any other check box or deselecting that check box will cause data6 to add 1 even if data5 displays "0". By way of example:
Selecting Check box 16 results in Data5 displays 1 and Data6 displays zero.
Then, if any or all of Checkbox17-20 are selected, Data5 displays 1 and Data6 displays 1.
Then, if any or all of Checkbox17-20 are deselected, Data5 Displays 1 and Data6 displays1.
Then, if Checkbox16 is deselected, Data5 displays 0 and Data6 displays 1.

Deriving 1 Value from 2 Fields Based on Values in Fields

I have a query that needs to return 1 of my values based on the values from 2 fields from 2 tables. However, the value should only be returned in 1 field and one of the fields should be evaluated first. If this first evaluated field has a certain value ('Y') then the other field is ignored.
To be more clear, per the normal query below, what I want is to somehow, if possible, combine the case t2.el_contr and case t1.contr_type statements so that one field, say: mbr_contr_type_desc returns a value.
So that if the value of t2.el_contr is 'Y' then 'SUB CHILD' is returned. It is important that this field should be evaluated first (If the value of it is 'Y' then the other field evaluation can be ignored). If this is not 'Y', then t1.contr_type should be evaluated and the values as listed below also returned to mbr_contr_type_desc.
I know the following isn't correct, but it might better illustrate what I'm trying to do (the normal query is below this)
case t2.el_contr
when 'Y' then 'SUB CHILD'
case t1.contr_type
when 'A' then '1 PARTY MALE SUB'
when 'B' then '1 PARTY FEMALE SUB'
when 'C' then '2 PARTY MALE SUB'
when 'D' then '2 PARTY FEMALE SUB'
when 'F' then 'FAMILY MALE SUB'
when 'G' then 'FAMILY FEMALE SUB'
end as mbr_contr_type_desc
In an Access query I would do the following in a column:
iif([el_contr]='Y',"SUB CHILD',SWITCH([contr_type]="A","1 PARTY MALE SUB",[contr_type]="B" etc.))
*NORMAL QUERY*
select t1.ssn
t1.type,
t1.grp_id,
t1.contr_type,
t2.el_contr,
case t2.el_contr
when 'Y' then 'SUB CHILD'
end as mbr_contr_type_desc_2,
case t1.contr_type
when 'A' then '1 PARTY MALE SUB'
when 'B' then '1 PARTY FEMALE SUB'
when 'C' then '2 PARTY MALE SUB'
when 'D' then '2 PARTY FEMALE SUB'
when 'F' then 'FAMILY MALE SUB'
when 'G' then 'FAMILY FEMALE SUB'
end as mbr_contr_type_desc_1
from member_elig t1
inner join grp_master t2 on
t1.grp_id = t2.grp_id

Perfect!
Thanks, didn't know that existed. Still learning my way around pl/sql..
One other (unrelated) question..when i hit the CTRL+LEFT ARROW* button in my SQL window, it will not tab back. This is really annoying! I have looked through PREFERENCES-EDITOR and can't seem to find any setting that will allow this. Do you know of any way to change this so I can tab backwards/fowards through code in the SQL window?
Thanks for any suggestions!
*Or CTRL+RIGHT ARROW for that matter..

HT4356 Fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

I have developed a fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

Hi,
I had a similar problem and found help for it. Go to the "Advanced" menu and select Extend features in Adobe Reader. That will enable rights which may resolve your problem. If that doesn't work, there is a really helpful guy in here, Robert Levine. You may want to ask him directly.
Good Luck

Matrix report - row field text extends into cell field's display space

The horizontal elasticity of the row field in the matrix is set to VARIABLE. This row field's horizontal elasticity needs to be VARIABLE (not FIXED).
However, this causes problems because if the row field's text length is long, the matrix does not change accordingly, i.e. the cell field does not move to the right to make room for the row field. So the row field extends into the display space of the cell field, and the text of the row and cell field overlap, and so the text is almost impossible to read (as well as ugly).
I have tried to put a frame around the row and cell field so that they are together and move accordingly, but this hasn't helped. I have also tried anchors but they cause the fields to appear NULL when they are not.
Any help is appreciated.
-nelson
[email protected]

I think you'll need to revert to a fixed sized field and increase the height of the field to cope with the number of rows that you could have.
You might be able to create a repeating frame above the matrix that tracks the matrix and pushes the whole matrix down as it expands, but I don't see how you could do this within the matrix structure itself.

Remove custom field instead of default text field

I need migrate to SharePint 2013 from 2007.
In SharePoint 2007 List include a custom field.
Dont use the custom field again,
I want remove custom field instead of default text field (remain metadata).
How to do it ?
Thanks

Hi ,
According to your description, my understanding is that you want to migrate SharePoint from 2007 to 2013 with managed metadata column. Is it right?
If you need to migrate managed metadata columns, you also need to migrate the Managed Metadata Service application. however, when you use this method, only global terms are available but the local terms are not available.
So, if you used the local terms for the managed metadata column, I suggest you use a third party tool or manually re-create the column in the destination list.
There are some articles about migrating managed columns, please take a look at:
http://sharepointconnoisseur.blogspot.jp/2012/06/migrate-sharepoint-2010-content-with.html
http://www.metalogix.com/help/Content%20Matrix%20Console/SharePoint%20Edition/002_HowTo/003_MigrationActions/011_CopyTaxonomy.htm
http://www.quest.com/tv/All-Videos/1749994742001/Migrating-to-SharePoint-Managed-Metadata-Columns-with-Migration-Suite-for-SharePoint/Video/
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Fields in Maintenance order subscreen Location are uneditable

In ECC 6.0, In the maintenance work order screen, the fields related to Location tab are not editable. I have maintained the fields in OIAZ as input field . Then also, the fields in the location tab are uneditable.It is displaying the data from equipment master data. How can we make this editable?
Thanks,
swami

Hi ebenalfa,
Check whether there is a transaction variant created for the transaction IW31/ IW32 and activated as a standard variant in SHD0. If there is, deactivate that transaction variant, that would resolve the problem.
Regards,
Muhammad Usman Kahoot

This field cannot be updated as there are open sales order lines

When trying to enable Item Attributes then I am getting a message "This field cannot be updated as there are open sales order lines". I cancelled the Sales Order ( which was having only 1 sales order line and that is also cancelled) but still I am getting the same message.
How to overcome this problem.
Khan

Thanks Karthik & Sandeep........
Issue got fixed. There was an open Sales order Line because of that line the issue was coming. After cancelling that SO Line, Users were able to update the Item field.
Regards,
Khan.
http://moreapps4u.blogspot.com/

How to extend the mapping table when a new field is added to the data model?

Hi Experts,
I have added a new field to the entity PCTR and run the structures.. My new field was created in structure /MDG?_SX_0G_PCTR.
My understanding is that I have to map it in the service mapping for USMDZ6_0G_PCTR.
How do I get it in structure MDGF_PRFT_CTR_RPLCTN_REQ_PRFT to be able to map it?
Thanks
Riaan

Hi Abdullah,
Thanks for the document. I have managed to successfully map the field in USMD_IDOC_0G_PRCMAS.
The field that I am using is PHINR(Profit Center area) because we don't want the Profit center Area to be created with the default for the standard area. Instead we want to be able to send a different field value and also be able to change the field value in the profit center.
It still defaults to the Standard group and does not use my entry when I replicate using the idoc.
Any suggestions
Thanks
Riaan

Y Alphanumeric Fields on right of a field are * when 'AT NEW 'is used.

Similar Messages

Maybe you are looking for