Yahoo emai reply not sent

This problem has happened quite a few times already since more than a month ago. Sometimes when I reply an email from my yahoo email (the free push email) in iPhone, the email reply is not sent. There is no delivery failure notice, nothing, the reply just disappears in thin air. I have friends telling me that they didn't receive my replies. I have done some testing and confirmed this problem. However, this problem does not happen on every reply. It just happens randomly. I am puzzled. I rarely have problem receiving emails in my iPhone; however, replying email in my iPhone can be a 50/50 experience for me. This is not good. Is this a bug or I need to reset my phone? If I don't get a solution soon, I will need to call the Apple support.
When I reply an email, I always make sure that it is sent by visually checking the send email progress bar and sound. Even with that visual and sound confirmation, the reply is never delivered. Again, this only happens on some emails. I am really disappointed at this kinds of basic email failure. I am looking for some answer on this.
Thanks.

Hmm.. good question. I just did some more testing right now and to my surprise, none of my original email or replies are sent. I sent handful of original emails from my iPhone and none were delivered to my other email accounts including the Yahoo email itself!
Wow... what's going on? It seems I cannot send out email even though I can still receive emails in my iPhone

Similar Messages

  • Getting "messages not sent" error from Yahoo e-mail outbox folder

    I tried forwarding two e-mails with attachments that somehow got stuck in my outbox.  I continually get the "x messages not sent" error message but when I click on the error and go to the outbox, I am unable to delete the messages or perform any other action because it says the messages are in the progress of being sent.  Any thoughts on how to clear this error?

    RegisMcGarry wrote:
    I tried forwarding two e-mails with attachments that somehow got stuck in my outbox.  I continually get the "x messages not sent" error message but when I click on the error and go to the outbox, I am unable to delete the messages or perform any other action because it says the messages are in the progress of being sent.  Any thoughts on how to clear this error?
    Simple delete the yahoo mail from the native email app. then go to the google play store and download the stand alone YMail app and you need only to enter your yahoo mail user name and password and it will work perfectly.
    Good Luck

  • TS3899 The email arrives with no problem, but when making a rely, the message pops up stating "The server does not allow relaying" and the reply is not sent.

    Received an iPad for Father's Day; during email setup, not able to send a reply to an email as a message appears stateing "Message not sent as server does not allow relaying." Can receive emails with no problem. Whoes server, theirs or mine.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Thunderbird is showing me messages from Yahoo that are not from Yahoo.

    I have 7 email accounts using Thunderbird and it normally works well, but while normal mail through Yahoo works fine, I am getting a hundred spams a day addressed to my Yahoo account but not showing up on Yahoo's webmail. They seem to have found their way into Thunderbird without passing through any mail servers I am signed up with.
    Here the headers from one of them:
    From - Thu Apr 02 14:30:08 2015
    X-Account-Key: account1
    X-UIDL: ABnnjkQAAALxVR2I9gdW6D2X+Ro
    X-Mozilla-Status: 0001
    X-Mozilla-Status2: 00000000
    X-Mozilla-Keys:
    X-Apparently-To: [email protected]; Thu, 02 Apr 2015 18:22:46 +0000
    X-YahooFilteredBulk: 173.246.181.56
    Received-SPF: pass (domain of todayasseenontv.com designates 173.246.181.56 as permitted sender)
    X-YMailISG: 6SAfCL8WLDuFWJyCetTLHyeMJhsDF5fNLzBG82DtmHWdJ27u
    21eyudITujl.csR29EMxApxWZldSwLxuPcoQ2aXHw_SmO_WBJOEnHApIRcrw
    L3_ApwFyKMjNbf8GcW.PTitHZ.Tx8ASswFVlAeK42KsuSZV6aUo6OiSskgy7
    wJO0wq25ApUKS3GEot7S2rNZhsPZr4tRq3QeXPoh8oRO_vsgbi0KMGvVJKz0
    B3rvBJdnPlfJJ4nTZ.kAE2x916atEyIsipogXStixRtJAmQOkWrbMXylu7IA
    X4YvElb_mZy7eN_5oNBzfBxx3rZHrzIb9n6qg014ulKi6L2HHLsd2A.ANWP3
    Gv5oNf5E3.hCDlBqbD3749_QCoOOK2qnmg7r0aA0DmGQLQ0p.cCf3KAUX7zQ
    b0_UqoJQ_fvgCVjELGmX14HDZJ2ndv2ERf3L6eTlpBgOQVIyKnqpMpUIgiLb
    f23.66FXDT4fEJ21n3dPVnfhCT1UVCHfCDonERoEoty.FI45atvi_0mErDkl
    VyXaCDwbtM1.n9.QJC17_ZDfFxx8EmV2AY4AbVq2WwBIkO.BFk00mTrFDGR.
    0umniSJeeBmrUHKC5Lsf3wOBXmbaNgY6__8OlFXpIJ7TSeEv4wetwkyN6hwI
    8jbBNamihYNY40I4cxbVFi3usD5uqWhWTA2Mkqqw1vKjaIaQOKbf2z9RbMxz
    TUm49WHs2g7YTpXZq.CtX9EwzvbzJFYg90PCiR77zMEqiZhEJ7C._64IjQtG
    DgWmLs0aXvZc6pqmCFtNv_xKGFYNTUqDaXzgXqPop9Oicn3LL4AYCjoY1pOk
    tRsEZ3WdPrSV6s0KsH7Egoik1087OOD0aaPwYWfd8jx5CtplCsH0VlV41YCV
    HsFsj9LfZFP.sfWFbj3Y_igiF_X0GwgNep5lEnIm9AuNRrobUtoFBDyucoP7
    bRNOrjabUZvA75BIdZfHcJLHsj.6bO3L4UqWlCydQYXAu4kcs0UCE6_hpc5H
    2lW7Xr0ZDOGKbWmFdhxL9U0I54i.5z3Tzi7.W7TnSRhIzG99m7qQmlyBnGlL
    .eg3hk4QxijV9zCTzSHQns6ROAqijCbPXZkSSITdzBU33WJR7_mzWYf.258.
    TArr5hSMRlRUTHMevS3hlONPEa1itnRBgfGW0.LB1zLZ_ul8yqLRRWBKL0cq
    4EpheYhml9T2FbxuTiSnXeR7KXovED1_u6ZKqycPGH3lU2cmbtQrCpO_cFqp
    yDSzqTaHd8oksgIbDane5mHrXleLisWIzdfmp31CABoBUej9KiWLO9dhCtH2
    ryyeFnOz5YNX4XoKuk8C42HyzShyyQCsFJFmAsPlxVCcZBxz95aL6buKb5yN
    2EC3WQr6VAPGoMf63psCtpVq5vJh8RTlPtOigo0Gw8ZwFP0kJusLrIMFy7da
    nOGom3L9aCKCabLKp2eheJpC__rllfQbnsh0qBmtT.u3nXkD1N0Yl8bL1f4n
    H3K02aFdRKreFetsdv4dQ44rq8VHikmn6u4MqhllWuUR.khvOuaqf9iR8CLa
    JHzwGHxbgpSM9LYxj3clIz4jwFh.1KESRviHyiY-
    X-Originating-IP: [173.246.181.56]
    Authentication-Results: mta1451.mail.ne1.yahoo.com from=todayasseenontv.com; domainkeys=pass (ok); from=todayasseenontv.com; dkim=pass (ok)
    Received: from 127.0.0.1 (EHLO host-6835318.todayasseenontv.com) (173.246.181.56)
    by mta1451.mail.ne1.yahoo.com with SMTP; Thu, 02 Apr 2015 18:22:46 +0000
    DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; s=todayasseenontv; d=todayasseenontv.com;
    h=Mime-Version:From:To:List-Unsubscribe:Reply-To:Message-ID:Subject:Date:Content-Type; [email protected];
    bh=sMDUDzIV0+Ycf0h5XP9kJBYgFYk=;
    b=YNwU0OEo153o5TfIYUjAHwvcxILKBCjfrapoAOaVNNl7SEulGSm0q87jDuQP0KeVgSQzvzORSbZs
    PrfymCEbKE5+WQx9DqtBqpdxEhMm1vZWUG8C32mKYyITInBZQQRxuUxjXW7kA/AVnFlTRBeuYQCb
    L3yqDr1Jmy0OL2JT+vo=
    DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; s=todayasseenontv; d=todayasseenontv.com;
    b=fcMFF/w1OtN2yRt9z9SVaKqaljJA/GkQ3kFFgte1jtAEA07PtCqd3QTcIJv8QCF0KzncibNdo3yP
    BblyIV4GEyb4ZkaALls7rwv7vYESNi7PFFnRvU7xkzoHF6In87HsPCUrQzYhYvKe5wC010GZRM2J
    iMSVWTFZGNEMbzXwITw=;
    Mime-Version: 1.0
    From: "As Seen On TV" <[email protected]>
    To: <[email protected]>
    List-Unsubscribe: <http://todayasseenontv.com/297024430710>
    Reply-To: <kkdjaeqhyssewgsbxviebskygsbssstjrsbxcxisksknysumssbcotpjfsbjbsaqq@todayasseenontv.com>
    Message-ID: <kkdjaeqhyssewgsbxviebskygsbssstjrsbxcxisksknysumssbcotpjfsbjbsaqq@todayasseenontv.com>
    Subject: [Bulk] Why you should consider As Seen on TV products
    Date: Thu, 02 Apr 2015 11:22:45 -0700
    Content-Type: text/html;

    Doh!
    Some are there, most are in the trash folder, which makes sense since I deleted them in thunderbird.
    It is curious that TB caught some of them before the web app showed them, but I'll leave that as one of the mysteries of email.

  • Mail w/Exchange 2007 Account- Reply arrow appears, but reply not found

    Hello out there,
    I'm really hoping someone can help with this. I have a problem, and it affects all three of the Macs I regularly use: an iMac at home, a MacBook on the road, and and iMac at the office. I have three mail accounts configured identically on all these Macs: Gmail, MobileMe, and an Exchange 2007 account, which uses the Web Services Edition. In short, everything is completely up to date all the way round. Oh, and I also use an iPhone which accesses my Exchange account for mail as well.
    My problem is this: I reply to a message in either the MobileMe or the Gmail account and presto, the reply arrow appears and clicking on it instantly reveals my reply. Works as advertised. In the Exchange account, the arrow also appears, and shows up on whichever Mac I happen to be using. However, clicking on the arrow I get a message that says something like "reply not found, you may have deleted it." Which, of course, I haven't. If I search the Exchange account's sent mail folder I find it easily, so I know it's there.
    I've tried all kinds of stuff, deleting the plist file, completely removing and reinstalling the Exchange account, rebuilding folders, all to no avail.
    Anyone have any ideas? I would really like to resolve this and find it a major flaw, at least as it appears, in Apple's implementation of Exchange server support.
    Thanks in advance!

    I have 10.6.3 running on my iMac and the problem still exists - all reply and forward status arrows are basically inert; clicking on they does not show my my reply or forward. I don't believe that there is any preference that affects this behavior so it can only be some kind of bug.

  • Out of Office Messages are Not Sent Out

    Hi there,
    I have an issue with Outlook's Out of Office feature. The Out of Office messages are not sent out (to both internal and external contacts) although it has been already turned on. Only one user is having this particular issue. 
    I've attempted these steps but the issue still persists.
    a) Turning on OOO via OWA
    b) Deleting the current profile and creating a new profile
    Could anybody help me in this?
    Regards,
    Vinod

    Hi Vinod,
    You issue might be related to this:
    "By default, the out-of-office reply to Internet recipients (external senders) is turned off. Many administrators do not allow out-of-office replies to be sent outside the Exchange Server organization, so that unauthorized people do not
    know when users are out of the office. "
    You might want to follow the steps in below KB article to turn on out-of-office replies to the Internet or contact your administrator to check so:
    http://support.microsoft.com/kb/323665/en-us
    Hope it helps and feel free to post back.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • IOS 5: regular messages are not sent if one recepient is registered with iMessage

    There is a bug in iOS 5: SMS messages are not sent if one receipients mobile number is registered with iMessages.
    This is confirmed by the developer of the team sms app:  if you send a message to a number of receipients and one of the recepients mobile numbers, the message is sent do, is registered with iMessage, then none of the recipients will receive the message.
    Does anyone know a work around until Apple comes up with a bugfix?
    Regards, Til

    I am not sure about the details of your case, but I can confirm that a message does send to multiple recipients even if one of this has iMessage.  I recently sent a message to two people, one with a BB and one with an iPhone 4 (iOS 5 and iMessage working).  Because of the difference, it resorted to the least common denominator and sent the message as a standard text to both people.  I was replied to by both parties.  Based on your description I can confirm that your detail is not the case.
    Have you checked through the settings in Messages?  Do you have a texting plan associated with your account?  I am sorry if these questions seem stupid, but they are worth asking to verify.
    I hope this helps!

  • FF Logs are not sent to the controllers

    Hello SAP Gurus,
    We have implemented GRC 10 on SP10, have configured EAM, and the Firefighter logs are populating afte running GRAC_EAM_LOG_SYNC_UPDATE, the notification is sent immediately to the FF owner after the FF ID login, but to trigger the workflow to populate Log reports after executing GRAC_EAM_WORKFLOW_SYNC, the email are not going to the  controller, have checked the workflow notiifcation settings, its configured, and the parameters are set to "YES".
    The sync job executes only for a second and gives the message as workflow sync is completed, but the email are not sent out.
    It was working fine few days ago, but now the job runs only for a sec.
    Any help or suggestion would be helpful regarding this?

    Hi Alessandro,
    Thanks for replying.
    The concern is the Workflow ysn was working fine few days ago,where the emails was sent out to the controlers and now seems to be broken, am i missing something on the configuration?
    The MSMP for the Firefighter log report is active and generated.
    Will apply the below notes , as it seems the notes are not available in the system,
    http://service.sap.com/sap/support/notes/1804320
    Will keep you posted with the results.
    Thanks again.
    Regards,
    Sindhu

  • My yahoo toolbar will not display.

    My yahoo toolbar will not display. Tried re-setting, reinstalling the toolbar and resetting firefox. Still doesn't display.

    I ended up getting rid of my Yahoo toolbar altogether and now I'm happy and hassle-free. See:
    https://support.mozilla.org/en-US/questions/1043713
    If you choose to do what I did--go to each page/website you like. Click and move the "www. Globe" in the address bar down to the Bookmarks Bar--"Most Visited" bar. When the toolbar is filled, they will be in the side-bar when you click >> to the right. You can move them around by clicking on their icon. You can delete any by right-clicking. Play with it and you will see.
    For bookmarks: Add the Bookmarks Manager App from the 3-bar menu bar at the top right. I exported my Yahoo bookmarks to an HTML file (as backup). Then click on Bookmarks Manager App--click on Show All Bookmarks--click on Import and Backup in Menu Bar--click on Import Bookmarks from HTML. To save a page into Firefox Bookmarks--just click on the star in the toolbar at the top--it will turn blue--click it again to put it into a folder or make a new one. The dialog box also shows you how to edit or delete a bookmark.
    I am not a computer whiz so I had to write it in layman's terms.
    It is really easier and quicker than the Yahoo toolbar. It looks cleaner too!
    If you have technical questions go to the bottom of:
    https://support.mozilla.org/en-US/questions/1043713
    and reply to FredMcD--he'll help you.

  • Mail Mssgs not sent.

    After loading Lion, I noticed outgoing mssgs are not sent, but end up in my Out box. try to resend, but no help.

    Sent: checked box @ Store sent messages on the
    server (and that's how I realized there was a
    problem, since nothing new was showing up, despite
    "sending" emails).
    Not sure what you mean here. It could very well be that the problem only happens when storing the messages on the server and disabling that option (i.e. storing the messages locally) would "fix" it. Other than allowing the problem to happen, what does enabling that setting accomplish that helps you "realize" there is a problem?
    Expand the Sent group in the mailboxes list by clicking the triangle on the left if necessary. Does a mailbox for the .Mac account appear there? If so, select it and choose Use This Mailbox For from the Mailbox menu. Do the options there appear selectable or grayed out?
    How is your mailboxes list organized in Mail? Do you see a globe icon for the .Mac account at the bottom of the list? Do you see a Sent Messages mailbox with a standard folder icon anywhere in the list, maybe as part of the .Mac account group?
    In the Finder, go to HOME/Library/Mail/Mac-username/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see whether there is something amiss within your account folder.

  • E-Mail is not sent for "Expense report reimbursed"

    Hello,
    When the expense report status changes to "Reimbursed", an email should be sent to the employee. But it is not being sent.
    FYI, both in Business Configuration --> Fine Tune Activity and Personalize --> My Data setting of employee, the email option is enabled for E-Mail Type "Expense report reimbursed". But still email is not sent out when the expense report is reimbursed.
    Best regards,
    Hari

    Thanks Joachim! Just to let others know, here is the reply I got in the incident.
    Your tenant is with SAP Cloud for Travel and Expense release 1311. In this release your finding is valid that some system glitch causes the e-mail not to be sent for reimbursed expense report. This issue should have been fixed in release 1402. Because now the upgrade to release 1402 has begun and all tenants will be upgraded to 1402 in several weeks, we may not fix the issue on 1311 tenants. Anyway the main features of handling expense reports in the system should work as expected.
    Best regards,
    Hari

  • Unable to stop text message not sent notification

    About a week ago I received a text from someone that was sent to my email address. I tried to reply to it and now the **** "text message not sent" notification keeps popping up and I can't make it stop. This is driving me insane.
    Message was edited by: Verizon Moderator

    I just had this very exact problem. I was on the phone with tech support for about 5 hrs until they finally gave up and admitted they had no idea how to fix this. They shipped me a 'like new' phone after all of my complaining, and I haven't had any problems as of yet. Basically your two options are to have them send you a new phone or factory reset your device and hope for the best. I did the reset and my phone just started acting worse.

  • Random texts not sent

    I use texting quite a bit and have an LG basic phone. About 1-2 months ago my phone would randomly not sent certain texts. Usually they were to ATT customers. They always appear in the sent file in my phone, but the person never receives them. I have never missed a text and can reply to anyone, but if I try to start a fresh convo with an ATT customer, it won't work. I just reset the roaming settings and that didn't change anything. Any other suggestions?

    You said this only seems to happen when you initiate the text, but not when you are replying to one sent to you.  Do you choose their name from your contact list when you initiate the text?  Or do you type in their number manually?  Or perhaps find a text from them in your recent messages list and then reply to that?
    Check the number you have for those contacts - make sure you are using the full 10-digit number (with area code, no leading "1").  Or try each of the methods mentioned above and see if your success rate improves with any of them.
    Choose from contacts - the number in your contact list must contain 10 digits (area code, no leading "1") in mos, if not all, cases, even if you are sending and receiving within the same area code.
    Manual number input - same rule - 10 digits
    Reply to previously received message - this should work in every case, as the phone is detecting the incoming number and will send a response to the same.

  • Content has not sent any info back to the LMS after the LMSInitialise

    We created a content piece with Cpativate 3 and it looks like
    the content has not sent any info back to the LMS after the
    LMSInitialise. So as per the SCORM standards, the LMS marks it as
    complete when the player window closes.
    The content needs to send back a status of incomplete as soon
    as it has done the LMSInitialise. The lesson_status = incomplete
    was sent by the LMS to the content, not the other way round.
    Is this because the content was delaying sending back a
    lesson_status of incomplete to the LMS, so the LMS was just marking
    it as complete if the content was closed too early.
    If anyone has had a similar issue like this and discovered a
    fix, please let me know.
    Regards,
    Ryan

    Hi Andrew,
    Thanks for the reply. We are using Saba and they have fed
    back to me that they have experienced problems before using
    Captivate. I am currently trying a few different settings to see if
    it is on my end. I will forwqard the piece onto you soon.

  • CO54: Message is not sent to any destination: Commit Work is getting failed

    Hello,
    While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
    While processing the message in second iteration Commit Work triggres and Update happens in the data base.
    Following Issue is only concerned with Nested HUs
    T-Code used CO54
    Following are the analysis:
    it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
    CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
    1. The error occurs while clearing the inventory posting for the physical inventory document.
    2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
    3. Indeed it is successfully processed without any error if you do process it second time.
    Error Log from C054 T-Code.
    02.08.2010                                         Dynamic List Display                                                1
    Type
    Message text
    LTxt
    Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
    Message to be sent to destination:
    ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
    => Message will be sent to destination (check log for destination)
    Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
    Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
    Input parameters OK, passed to source field structure
    Step 0: Now checking if scenario with HU
    Step 2: Scenario with HU, Now checking if HU nested
    Step 3: HU nested, checking if HU in repack area
    Step 4: HU not in repack area, moving it to repack area
    HU moved to repack area, TO number 0000000873
    Step 5: Depacking nested HU...
    Nested HU depacked, HU pallet n°: 00176127111000461994
    Steps 6-7: Moving back HUs to supply storage type / bin...
    HU 00376127111000462001 moved back to original area with TO number 0000000875
    Steps 6-7: Moving back HUs to supply storage type / bin...
    No need to move back HU 00176127111000461994 (not in table LEIN)
    Step 8: Checking if HU fully used and quantity matches HU system quantity
    HU not fully used but picked quantity > HU quantity: inventory necessary
    Step 9: Inventory needed, creating physical inventory document...
    Physical inventory document 0000000126 created
    Step 10: Adding weighted quantity on inventory document...
    Weighted quantity entered in document 0000000126
    Step 11: Posting rectification in inventory document 0000000126...
    Physical inventory document 0000000126 rectified
    Error: rectification for doc 0000000126 not updated in DB!
    => Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
    => Message is not sent to any destination
    The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
    From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
    WHEN CON_LK01_NACH.
           IF (LEIN-LGTYP = LK01-NLTYP AND         
                 LEIN-LGPLA = LK01-NLPLA) OR
                  NOT P_LEDUM IS INITIAL.
           ELSE.
    Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
             FLG_NO_LE_UPDATE = CON_X.
            MESSAGE A558 WITH P_LENUM.
           ENDIF.
    Translation in English of the German text via Google:
    "This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
    Thanks and Regards,
    Prabhjot Singh
    Edited by: Prabhjot  Singh on Aug 2, 2010 4:39 PM

    Hope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
    1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
    2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants.

Maybe you are looking for