Yahoo! email does not load through ipad Mail app.

I'm using an iPad mini and for about 1 week now the built-in Mail app does not retrieve my Yahoo! email. When I click on the Mail icon a blank screen comes up -- no error message, no nothing, just a blank screen. I have to use the browser to access my Yahoo! email. I have tried deleting and re-establishing my Yahoo! email account. I have tried re-establishing my network connection. I have tried restoring my iPad to factory settings. I have switched my default email account to G-mail and I receive my email just fine through the built-in app. But Yahoo! is my primary account and I cannot get my email. This just started in the last week. Prior to this I have been receiving Yahoo! email just fine through the built-in app for 3 years. But now nothing. Also, the mail app recognizes I have new mail because the little red number pops up when new mail arrives. But in order to retrieve the mail I have to go to the browser, and once the mail is read, the little red number disappears.
I contacted Yahoo! support and they suggested I set up an app password if I use two-step verification. But I don't use two-step verification. Then they suggested checking my IMAP settings, but IMAP settings aren't accessible (that I know of) through the iPad mini settings. So I just re-established the network settings to no avail.
I can't help but think this is a Yahoo! email server issue, but Yahoo! doesn't mention that.
Someone please help!

Yahoo mail works on my Mac desktop & laptop, plus my iPad 2.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

Similar Messages

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Windows 7 does not load the ipad bluetooth drivers

I am trying to connect my ipad 2 to a windows 7 computer and the computer will not load the ipad blutooth drivers so a connection is never made.

Hi Phil,
It's funny that you say that Reflector runs on Wifi and not Bluetooth. I thought the same thing and that's why I was having a difficult time with getting this to work...on top of the bluetooth drivers not installing properly.
When you initially connct your iPad device to your computer through bluetooth, your PC installs bluetooth drivers...you can see this by the little notifictaion you get that says this. Setting up your device...installing drivers. So you can't tell me that there are no iPad bluetooth drivers.
You have to enable bluetooth on your ipad to get to the mirroring icon. (double tap your home button and scroll to the left. The mirroring icon should be visible and only visible if you have bluetooth turned on. Now if you run Reflector, then you should see the name of your PC that you shared through Reflector. Then you click on the mirroring app on your iPad and select the shared name on your PC and slide the mirroring toggle button to turn it on.
I have tested this on another laptop running Windows 7 and everything installed perfectly fine...even the bluetooth drivers.
So my conlusion is that it is the bluetooth drivers at fault here, since they didnt install properly. No matter how many times I remove the device and readd it, the bluetooth drivers do not install and I see red x's beside them.
Not sure what is keeping the drivers from being installed.
BTW...thanks for your reply Phil...see posting to this year old thread did me some good as you replied
cheers,
Tom

Email does not go through because server did not reply

Very recently, I get an error message "email did not go through because server did not reply" when trying to share a photo from iPhoto to email...regular Mail works very well. What's going on here?

Have you changed anything with your email recently like to two step validation or your password or???
in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

Stop email checking when first entering iPad Mail app?

Whenever I enter the iPad Mail app, it automatically downloads my messages even though I have all my fetch settings set to "manual". Is there a way to disable this? I only want to fetch messages when I say so. For example, in Mac OS Mail, I check my email manually -- when I first launch the Mac OS Mail app, nothing happens until I click "Get Mail".
I'd like to have a little more control with iPad Mail. Any ideas?

even though I have all my fetch settings set to "manual"
There seems to be several places to set this ... did you set them all
to manual.
I did, and yes, I still have the problem you mention, the iPad seems
to always keep open the connection which means that it shuts out
my other devices from connection to email because of server resource
contention.
It is funny that the email should be designed this way. It ought to
be fully manual because of the nature of the use of the device, and
the nature of the intermittent wifi connections. There is no point to
keep it open if one is moving around and the network connection keeps
going in and out, or being lost.
I like the fully manual idea, I click the mailbox I want to look at. It
shows me the mail, highlights the new ones, and then I can view or
not, and when I am done it all shuts down, freeing resouces on the
server and being a good citizen, like all Apple devices ought to be.
This is behaving like Outlook Express or something!

After password changed, Gmail is not working on iPad mail apps.

After Gmail password changed, iPad mail app's not working.
I changed password on ipad setting too.
But its showed ' Theuser name or password for "Gmail" is incorrect. '
I can use Gmail from safari.
Why?

Try this. Even if the outgoing primary server states that the username and password are optional, fill them in anyway.
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails.

Email images not loading on iPad and iPhone 4

Images are not loading in certain emails on both my iPad and iPhone 4 over wifi. They're showing up as blue boxes with a white question mark inside. Also in the iPad app store, certain app icons are showing as whited out. If i shut off wifi on the phone, the images will load in the emails through 3g. Does anyone have any idea what would cause these issues and how to correct the problem?

Who is your ISP?
I had similar problems with both my iphone and ipad when using my wifi, but not when using cellular. Turned out to be a Comcast issue with their implementation of DNSSEC validation. You can see my full explanation on my blog at http://blog.trif.com/?p=295. The site is being blocked by Comcast because the Microsoft portal does not meet DNSSEC validation rules. This applies to Comcast DNS Servers 75.75.75.75 and 75.75.75.76.

Mail content does not load in Apple Mail 10.8.2 using exchange server

About 10 am this morning Apple Mail stopped working. Initially, no emails could be sent or received even though connection doctor found nothing wrong with the internet connection. At 4pm, email would load but with just the sender and the subject - no content will load. Is anyone else having this problem with Mail?

http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen. If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

Adding Work Exchange Profile, now Yahoo email does not work

Hi, my phone was setup to recieve my home rogers (now yahoo) email via the cell network (I usually have wifi turned off). A couple of days ago my work installed a profile so that I can connect to the corp exchange server. Once setup was was able to send and receive email from my corp exchange server, and I could see both accounts inboxes...however, now my home rogers account does not update. I have checked and both are sent to "push". Funny thing is, if I turn on wifi, my rogers account does work.
Can I not have them both get their email from the cell network?

Cannot load in box. Other folders (trash, sent etc.) load fine and are updated. Comcast email works fine. Have deleted, re-added yahoo, reset computer without help. Worked fine for months

Skype does not load through Windows portal, opens ...

Hi I am using Skype on a PC. I can open the program and enter my login information, but as soon as it loads me in, I enter to a blank screen with no options.
I have attached a picture of my Windows Information, IE information, confirmation that Java is enabled and a screen shot of the program when it logs me in.
I have read through about 12 different posts, tried the problem solving with no luck.
Very important to note: I can actually log in, but my contacts and options do not load up.
Attachments:
IE Info.PNG ‏46 KB
System Info.PNG ‏57 KB

Couldn't add the other 2 to the initial post
Attachments:
Javascript Confirmation.PNG ‏53 KB
Skype Login Screenshot.PNG ‏34 KB

Embedding pictures in Yahoo email does not work using firefox 3.6.8

I am using firefox 3.6.8. I cannot embed pictures using my yahoo email. Why? Embedding pics with IE works fine with yahoo, but firefox doesn't.
Can firefox even embed pics in yahoo email or is this a known bug?

Used to work fine until the 3.6.6 update

Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

firefox problems after installing version 4.0

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

MAIL on my MAC does not load any new mail or delete any mail in any of my other folders

I've been having this problem for a couple of days now. Its as if MAIL just doesn't respond to anything. I can't get any New MAIL to load. And if i try to delete anything from SPAM, JUNK... and so on. They won't delete, they just show up again after deleting.
I restarted the computer, and checked all my settings as well. I also uodated the computer.
MAIL works from my iphone ans ipad. Just not MACBOOK PRO.
Any help is appreciated.
Jimmy

Drafts, ToDos (Notes), and Outbox are found normally in the Mailboxes folder but do not usually appear in the On My Mac section. As for Deleted Messages that may be a remnant from before you used an IMAP account or if you at one time configured Mailbox Behaviors in Mail preferences to keep deleted messages locally instead of on the IMAP server.

Anyone know why Yahoo emails will not load? Emails, including those I could previously access are blank. No problem with seeing them when using another browser

Yahoo mail--can access inbox but cannot access individual emails. Have tried disabling all add-ons, but there is no difference. Emails are visible using another browser.

I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>

One site does not load on iPad/iPhone when only few port like 80, 443 and 53 are allowed

Hi All,
I have a router which does port blocking allows access through certain ports only. The allowed port list include 80,8080,443 and 53 however I cannot seem to be able to connect to www.argos.co.uk using safari on iPad and iPhone. Both runs iOs 8.3. Access to other sites works without any problem.
Access to www.argos.co.uk site works fine when accessed through Android or Windows devices through the same router. Any idea what could be the problem ?

I can replicate this problem on a number of other sites!
If I lock the router to just use the main ports like 80, 8080, 443 & 53 and use an Apple device to view www.diy.com or www.boots.com the sites take 10 times longer to load than when the router has all its ports open. I have tried a MacBook, iPad and iPhone with Safari and another browser.
If I do the same tests using Microsoft or Android devices the sites load quickly with the routers ports locked on unlocked.
Does this suggest that Apple are relying on non essential ports for web traffic?

Yahoo! email does not load through ipad Mail app.

Similar Messages

Maybe you are looking for