Year of cash effectivity mandatory for budget category 9F

Hi,
While creating a PO/Goods Issue I am getting the below error.
Year of cash effectivity mandatory for budget category 9F
I have activated the payment budget and commitment budget. Time horizon for payment budget is 5yrs and commitment budget is nil.
i have not checked the "Start next year" checkbox.
Please advice.
Regards
Shekhar

Hi,
You have two similar questions, so i try to help on this one.
You can only use the Year of Cash Effectivity in BCS budgeting, if you use an appropriate FM update profile for updating posting data to FM. 
If you use an FM update profile, which does not support the year of cash effectivity (=>field RGNJHR is always SPACE or 0000 in table FMIT) then you MUST set the time horizon to Space or 0 for all budget categories you want to use (ledgers 9F and 9G), in BCS customizing "Define Budget Categories".                                                                               
The posting data for ledgers 9A and 9B which you have created with Former Budgeting remain valid, even with BCS active (the activation of BCS does not change the way how postings are updated to FM!.                                                                               
However, if you have used an FM update profile without Year of Cash Effectivity before, together with Former Budgeting, and if you have now changed to another FM update profile WITH Year of Cash Effectivity, then you must migrate all existing posting (or FM update) data in your system, for all fiscal years since the activation of BCS, by filling the field RGNJHR or GNJHR in the corresponding FM tables (FMIT, FMIFIIT and FMIOI) with some valid value (i.e. greater or equal to the fiscal ).                                                                               
I hope this help you.
Regards, JLB

Similar Messages

  • Error Message FMBAS202 Year of cash effectivity mandatory for budget cat 9G

    Hi all,
    I activated BCS and use update profile 000350 (Separate PB/CB budget lines; standard), we tried to post simple FI posting and the error come up
    ==============================================================
    Year of cash effectivity mandatory for budget category 9G
    Message no. FMBAS202
    Diagnosis
    The FM update profile does not support the year of cash effectivity for commitment/actual values (posting ledger 9B). However, the year of cash effectivity is mandatory in BCS budgeting for budget category 9G and FM area 0100: the minimum value in this case is 2009.
    System Response
    Processing of the commitment/actual data record stops.
    Procedure
    Deactivate the year of cash effectivity for the corresponding budget category 9G and FM area 0100 in the IMG activity Choose Budget Category.
    ===============================================================
    So I click the link and it goes to Define Budget Category screen where we assign budget category (9G) and time horizon (1) to a FM area, but not mention of deactivating year of cash activity.
    My question is:
    1. Where is the button to deactivate the year of cash effectivity?
    2. What's the difference between budget category 9B and 9G? Both are Commitment Budget.
    3. I dont remember assigning budget category 9B to an FM area. Where is the setting?
    Thanks

    Hi,
    When you go to IMG - Public Sector Management - Funds Management Government - Budget Control System (BCS) - BCS Budgeting - Basic Settings - Definition of Budget Data - Choose Budget Category, what's the settings for 'Time horizon' field? It should be blank for 9G(commitment), if you don't work with cash effectivity.
    9B is posting ledger, while 9G is budget ledger. You don't have to assign 9A/9B to FM area.
    Regards,
    Eli

  • Year of Cash Effectivity and Due Date for payments in following year

    Hi experts!
    I have a problem with Year of Cash Effectivity when dealing with invoices which have Due Date in a different year from the posting date. I just need revenues and expenses to be recognized under the accrual basis of accounting (with the invoice, not with "cash effectivity" depending on terms of payment). But we do need "cash effectivity" for commitments budget and MM.
    I am using Update Profile=000359, and have tried to "Override Update Profile" for Value Type=54 (Invoices) checking "Posting Date" for Payment/Commitment Budget, instead of "Due Date". I have also deactivated settings that have to do with payments transfer in <<Public Sector Management->Funds Management Government->Actual and Commitment Update/Integration->Integration>>.
    Is there any way to change this without changing Update Profile?
    Thanks for your help!
    Iván Garcí

    Hello Ivan
    I believe this note will help you:
    [Note 883122 - Spanish Public Sector: Specific functions (BAdIs and exits)|https://service.sap.com/sap/support/notes/883122]
    see this paragraph
      BAdI FMRI
      The method FMRI_BADI_9 allows the customer to change, according
      to their needs, the Year of Cash Effectivity in which FI
      documents are updated in Funds Management.
      The system performs some checks (for example the update profile
      has to use the Year of Cash Effectivity) to permit the
      modification of the Year of Cash Effectivity in this BADI. The
      Year of Cash Effectivity determined in this BAdI cannot be
      earlier than the one for the date when the Financial Accounting
      payments are updated in Funds Management.For more detailed
      information on this topic, consult the note 1129408.
    hope this will help you!
    Kind regards
    Mar

  • Partner function mandatory for Item category

    Hi all,
    Here is the requirement & current settings,
    For consignment sales process ,we have 2 diff. item cat.  ,    for both common partners are SH,SP,BP,PY.
    For consgn. issue item category we ned retailer as mandatory partner.
    created a new partner as retailer & asigned in the account grourp,
    Created new partner procedure  with ship to party & retailer as mandatory functions & asigned to cons. issue item category.
    While creating consignment issue w.r.t consignment fill up, in the order the partner retailer has to be a mandatory function, but with current settings it is allowing to save the sales order.
    is there any thing to be maintained,
    your inputs will be appretiated.

    You can try this.
    Go to IMG SD > Basic Functions > Partner Determination > Set Up Partner Determination > Set Up Partner Determination for Sales Document Item.
    There create a new Partner Det.Procedure say Z, by copying standard N. Next click on Partner Functions in Procedure.  Now, against this new Z procedure, you can see that special stock partner.  Against that partner, select the box Mandatory.
    Next click on Partner Determination Procedure Assignment and select Item Category KEN and assign Z.
    Finally, assign this Z to your item category in VOV7
    Now try the process and update the forum.
    thanks
    G. Lakshmipathi

  • Change Layout for Budgeting Workbench  - Transaction FMBBC or FMBB

    Hi All,
      Can anyone please let me know how to change the layout for budgeting workbench. Currently SAP uses the standard layout 'SAP001'. How can the layout be changed.
    Thanks,
    Raj.

    Hi,
    Go to IMG - Public Sector Management - Funds Management Government - Budget Control System (BCS) - Budgeting - Budget Entry - Budget Entry Documents - Document Definition - Define Layout for Budgeting Workbench. There you can define layout with the default for budget category.
    Regards,
    Eli

  • Budget mandatory for earmarked fund

    the funds managment module is made mandatory and activated. while accounting the expenses the system checks the buget avaialality and does not allow unitl the budget is available for a committment item.
    i want to make the budget availablity mandatory even while raising the earmarked fund against the budget. i am able to raise earmarked fund even without any budget upload.
    i want to know how to make budget mandatory for earmarked fund pleae.
    regards
    sathya

    Hi,
    That's up to your update profile. Check whether earmarked funds are created as statistical updates; you can do it via OFUR transaction. Then, change it to be non-statistical for relevant value type (81, 65 or 82 - depending what earmarked funds - commitments or reservation - you are using).
    Regards,
    Eli

  • A/C assignment category mandatory for the material

    Hi Gurus,
    I am facing the error message"A/c assignment category mandatory for the material" while creating a PO. How to fix this?
    Thanks,
    Kumar

    hi,
    For PO you can make the account assignment optional from:
    SPRO --> MM -> Purchasing --> PO --> Define screen layout --> Here choose me21 --> see the details....check in the basic data, item details....
    For the material type of the material , the qty n value update setting is:
    SPRO--> Logistics general --> MM -> Material type -->Define attributes of material type --> in it see for individual material type...
    Hope it helps.
    Regards
    Priyanka.P

  • Effective Date for Yearly Increment

    We are having different effective dates for Salary and Hourly employees for whom I have created two Guideline groups but under the same Comp Plan and Comp Review Item. I am getting the desired increase Dollar amount in Annual figure for Salary and hourly figure for Hourly. But, the effective date is also taking same as per the Comp Review Item. When I tried to add one more comp review item for Hourly, I am not able to do with the same combination of Plan and Review.
    So, how can I get the respective effective date as we have only one place to define the same? Do I have to create one more Comp Plan for the Hourly employees?
    Thanks

    I was thinking your issue was with applying the appropriate guidelines.. If it is only the effective date, you can implement the BAdI HRECM00_EFFDATE & pass back the new effdt in the method GET_DEFAULT_EFF_DATE.
    ~Suresh

  • Budget Category

    Hi Experts,
    Can any one throw some  light on Budget Category
    The difference between Payment Budget & Commitment Budget, and their application in real time scenario with some example.
    Regards,
    Purnima

    Hi Purnima,
    Budget categories are connected with FM update profile. For example, for commitments and actuals update profile 00101 only updates payment budget but profile 00351 updates the two categories payment and commitment.
    So regarding this definition you should chose which budgeting categories you need to use.
    More that one budget category is used if you want to update and check the budget information from different points of view, usually budget commitment and cash.
    An example again, you chose the profile 00351, the commitment budget (9B) is updated based in posting date and the payment budget (9A) is updated based in due date, if you post an invoice 15/12/2009 with payment term 30 days then the commitment budget is update with FM date 15/12/2009 and payment budget is update with FM date 15/01/2010. So you have to have budget in Commitment budgeting category (9G) for 2009 and for Payment budgeting category for 2010 (fiscal year ends 31/12/2009).
    Each category have its own AVC ledger, except Financial budget 9J that only has budgeting purposes.
    Regards
    César

  • Query For Finding Yearly Opening and Closing Balance for All the Items

    Hi Experts,
    I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
    i will give yearwise selection and I want opening and closing stock in between that years
    Warm Regards,
    Sandip Kokate
    Edited by: Sandipk on May 20, 2011 1:58 PM

    Hi,
    Declare @SDate DateTime
    Declare @EDate DateTime
    Declare @Whse nvarchar(10)
    Set @SDate= (SELECT min(F_RefDate)  FROM  OFPR T1 where  T1.[Name] ='[1%]' )
    Set @EDate= (SELECT max(T_RefDate)  FROM  OFPR T1 where  T1.[Name] ='[%1]' )
    Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
    BEGIN
    Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
    sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
    ((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
    (Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
    from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
    as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
    Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
    N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
    sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
    and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
    Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
    From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
    and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
    where a.ItemCode=I1.ItemCode
    Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
    END
    I hope this will work for you.
    In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
    Regards
    Vaibhav Anharwadkar
    Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM

  • WBS element field mandatory for specific sales order

    Hi Friends,
    I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
    Ratna

    Hi,
    As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
    Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
    Hope this will resolve ur problem.
    rgds
    Dhiraj

  • Can you please help me out the Info Cubes info for Budget Execution?????

    Hi,
       Can you please help me out the Info Cubes info for Budget Execution and Cash Management.
    Thanks in advance,
    Andy

    Take the memory card out of the camer and put it in a card reader.  When it mounts on the desktop select it and try to change the name.  However, that might make it incompatible with the camera.  You'll just have to try and see.
    OT

  • Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • Material Number mandatory for PR exceptP for Service Purchase Requisition

    Hi All,
         Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
        In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout  at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
    Please suggest.
    Regards,
    rosh

    hi sridhar,
      Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
    Regards,
    Rosh

  • Unable to find Database Item Name for Employee Category at assignment level

    Hi,
    What is the database item name for employee category at assignment level.
    I want to call employee category colomn of assignment level in fast formula.
    Thanks in advance...

    It seems that there are no seeded database items available for employee category, the only other option is to write a plsql function at the database level which will return the employee category for a given assignment_id & effective dates. Link this plsql function to a Fast formula function. You can use the newly created fast formula function in your fast formula.
    Regards,
    Senthil

Maybe you are looking for