Your experience wanted: SE30: low number of calls, high nettime

Hi,
this question is to find out more examples based on your experience:
During performance analysis with SE30 i came across the following in 2 cases:
All options on the statements tab where set (internal tables, ...).
The Hitlist showed a significant time consumer FM with
- a low number of executions (e.g. 1)
- a high gross time (e.g. 5.5 seconds)
- a high net time (e.g. 5.4 seconds)
A closer look (debugger, sourcecode) revealed this was due to:
- implicit sort of a big internal table (sorted_table = unsorted_stanard_table)
or in the second case:
- call transformation (itab to xml with some ST programm)
I would like to know if you are aware of more such examples of significant time consumers
not showing up in the SE30 hitlist.
Kind regards,
Hermann

Hi Anette,
thanks for that hint. Indeed i haven't done that. However, neither the implicit sort, nor the call transformation shows up their times are included in Net of F2 and F1. This is how SE30 Hitlist looks looks like without any filters: (top lines only...)
No.      Gross =        Net Gross (%) Net (%) Call                                              Program Name     Type Display filter group
1 1.257.991    1.257.526      94,8    94,7 Perform F2                                        Z_GAHM_ITAB_TEST
1    34.060 =    34.060       2,6     2,6 DB-Op. Fetch T100 #                               Z_GAHM_ITAB_TEST DB               DB
1    21.190 =    21.190       1,6     1,6 DB-Op. Open T100 #                                Z_GAHM_ITAB_TEST DB               DB
1     9.281        9.192       0,7     0,7 Perform F1                                        Z_GAHM_ITAB_TEST
1 1.327.538        2.402     100,0     0,2 Submit Report Z_GAHM_ITAB_TEST                    SAPMS38T
1 1.324.396          332      99,8     0,0 Program Z_GAHM_ITAB_TEST
7       320 =       320       0,0     0,0 Storage Get Bytes= 100000                         Z_GAHM_ITAB_TEST                           M
3       136 =       136       0,0     0,0 Storage Free                                      Z_GAHM_ITAB_TEST                           M
1 1.322.927           85      99,7     0,0 Dynpro Entry                                      SAPMSSY0              S
4       772           63       0,1     0,0 PBO Dynpro SAPMSSY0                               SAPMSSY0         Sys. S
1        50 =        50       0,0     0,0 Load CUA Objects SAPMSSY0 1000                    SAPMSSY0         Sys. S                 Dy
1        50 =        50       0,0     0,0 Storage Get Bytes= 100000                         Z_GAHM_ITAB_TEST                           M
1        82           49       0,0     0,0 Perform INIT_1_PROG                               RSDBRUNT              S
This is the QnD (quick and dirty) test program:
REPORT Z_GAHM_ITAB_TEST.
data it like STANDARD TABLE OF t100.
select * from t100 into table it up to 10000 rows.
perform f1.
perform f2.
form f1.
    data it2 like Sorted TABLE OF t100 with non-unique key msgnr.
    it2 = it.
    endform.
      form f2.
data: s type string.
call TRANSFORMATION id
SOURCE root = it
RESULT XML s.
    endform.
So either I'm doing something wrong or these times are just not measured and displayed. If these are noe measured / shown, I wonder if there are more such examples... .
Kind regards,
Hermann
QnD programm corrected (RESULT XML s instead of RESULT XML = s)
Edited by: Hermann Gahm on Apr 3, 2009 11:42 AM

Similar Messages

How do I determine who is calling me. An unknown phone number is calling me late at night? I want to find out who it is.

How do I determine who is calling me. An unknown phone number is calling me late at night? I want to find out who it is.

Yes, yes, yes. I am well aware about your line of Verizon is "THE Phone Company". Unfortunately, everyone was not subscribed to "THE Phone Company" back before "THE Phone Company" was broken up. Some people have lines which were not in existence and have never been subscribers to "THE Phone Company". There are new area codes and numbers since "THE Phone Company" was broken up. I was unaware Straight Talk, T-Mobile, Sprint, Time Warner Cable, MagicJack, etc... automatically provide ALL of the private information of their subscribers to "THE Phone Company" simply so these other companies can exist. I was unaware "THE Phone Company" required each and every phone provider in the US to gather information for the USER of a phone when that USER was not the account owner. I don't remember giving my 15 year old daughter's information to "THE Phone Company" when I opened up her line 5 years ago. Obviously I did, since "THE Phone Company" has it as you would lead us to believe. I wasn't aware "THE Phone Company" required someone opening an account with 10 lines to provide the private user information for each and every one of those lines. When I opened up my 4 line account, I only remember giving out MY information. I don't remember validating everyone on the account was related to me. I don't remember giving out the names/DOB/SS #/etc... for everyone using the phones on my account. That information must have simply slipped my mind.
For what it is worth, I never said they didn't have information on "every single number coming and going" thru their system. That is not the information being requested, though. The OP wants to know the name of the person making the call. If Verizon, aka "THE Phone Company" does not gather information on all users of a 10 line More Everything account from the account owner, where exactly are they getting this information. Furthermore, if they don't even gather this information of their own subscribers, why would you expect they have this information on the subscribers to other phone providers? It is not required to open a 10 line account. They do not run credit checks on all the users. They do not require SS#s on all of the users. They only require this information on the account owner. Are they staking out the account owner and following him/her to determine who is using the phones on his/her account? I guess I am simply too trusting.
You speak of "back in the way old days". Well these are no longer the "way old days". Lines on an account can be scattered all over the US. The users of these phones aren't necessarily and more often every day not even related. "THE Phone Company" doesn't necessarily and is UNLIKELY to know the identity of the majority of people using phones on an account. The account owner, yes. Everyone else, NO. People making a call are just as likely using an area code/phone number of a location they don't even physically reside. "Back in the way old days" this was much less commonplace.
Yes, they MAY be able to get the name of a caller, but it would take time and COULD take a considerable amount of time depending on the cooperation of the account owner.

I want to block a number from calling and message me but how do i do this is there any app avalible for this

I want to block a number from calling and message me but how do i do this is there any app avalible for this

Sadly, as Call Bliss uses the built in Do Not Disturb feature, it requires that your screen be locked in order to function.
I'm hoping (and have submitted feedback) that Apple will beef up DND to work even when the screen isn't locked.

I wanted to know why they call me when I do not show the number but I get the words private number, and even when I call out to another private number.

I wanted to know why they call me when I do not show the number but I get the words private number, and even when I call out to another private number.I tried it in the settings to activate id shows but nothing has changed. I hope you can help me.

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Anyone help with linking a bank account to your apple id. The form wants a phone number I only have a UK mobile number and it doesnt sem to want to accept it keeps l;ooping me back to entering a phone number.

Anyone help with linking a bank account to your apple id. The form wants a phone number I only have a UK mobile number and it doesnt sem to want to accept it keeps l;ooping me back to entering a phone number.

If you are trying to setup a charge card number on the Apple Store - make sure you are in the Correct country site - icon bottom right last time I saw it - where you can change country.

I bought few years ago a Creative Suite Design Premium and when I want to register my series number, yours services say that the number is invalid. I very surprise because I used it before on a PC computer that doesn't work anymore. I change my computer

I bought few years ago a Creative Suite Design Premium and when I want to register my series number, yours services say that the number is invalid. I very surprise because I used it before on a PC computer that doesn't work anymore. I change my computer with a Mac. Can You verify the number you customer services gave me, L. Fernandes : <serial num removed-kglad>. I give you my phone number in Paris : <phone num removed - kglad>. Best regard. Chantal

http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
p.s. this is a public forum. posting your phone number is a bad idea and posting your serial number will get it banned (or used by someone else and unavailable to you).

I bought the new iphone. I want to create an account. Your system wanted my credit card number, but I don't have any credit card. How can I create an account?

I bought the new iphone. I want to create an account. Your system wanted my credit card number, but I don't have any credit card. How can I create an account?

as shown by a link describing the "none" option is not

I got notification - Your Apple ID was used to sign in to FaceTime on an iPad 2 . It was not me - How do I find out who or what number was called?

I got notification - Your Apple ID was used to sign in to FaceTime on an iPad 2 . It was not me - How do I find out who or what number was called?

hi i was wondering about how can i set up my apple id min order to get notified via email when someone is using my aplle id to find my iphone?
please help

Is there a phone number to call Adobe. I go around an endless loop pressing their contact info tabs? Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Ai

Is there a phone number to call Adobe. I go around an endless loop pressing their contact info tabs? Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Air. It was working fine - I was using LR and a message came on the screen that said something like the memory was dangerously low. I stopped and tried to delete LR files. I couldn't do it. I closed the program and tried reopening and got the message that there is not enough memory available to open LR. I contacted Apple. They spent a half hour on the phone with me and eventually told me they didn't know how to help. The tech said that LR had gobbled up all the memory and said I should contact Adobe and ask where and how my photo files are stored and to delete them. I have several back-ups. Thanks - Arthur

This sort of error message only comes up for Lightroom when your hard disk is full. Indeed this has nothing to do with internal memory as that will be intelligently be dealt with. If you have a mac Book Air that is not so surprising as the cheapest versions come with very small hard disks and if you shoot raw with any recent camera, you'll fill up your hard disk very quickly and you can probably only store a few months of pictures if you are a typical photographer. So the bottom line is that you need to create some room on your hard disk. You should move some of your originals to an external hard disk. You can also delete some of your backup copies of your catalog file that Lightroom automatically generates every few days and that quickly gobble up hard disk space. So first figure out how full your hard disk is. To see that, go to the apple menu, hit -> About this Mac -> More info->Storage. You should see your internal hard disk on top and you'll find that it is almost entirely full with photos. Now find your Lightroom catalog file using Finder. It is usually in a folder in the Pictures folder in your home directory. You should see a Lightroom 5 Catalog.lrcat file, a previews file and a folder called backups. Inside the backups folder, you'll find a lot of subfolders. They have names that show the dates the backups were created. If you have backups of your entire hard disk, you can delete these backups when they are older than a few months. I usually only keep the last 4 around. Just drag the folders into the trash can on the dock on the bottom of your screen and empty the trash. This will probably free up enough space that Lightroom will already run again. Now start thinking about where you will want to store older images. If you have a good USB3 or Thunderbolt hard disk that is probably the best option. There is a video here by Adobe that has some instructions on how to do this: Is Your Hard Drive Full? Here’s How to Move Images to Another Drive in Lightroom. « Julieanne Kost's Blog If that doesn't work because you don't have enough hard drive space to run Lightroom yet, here is another set of instructions to move your files using the finder to the other hard disk: How do I move only my photos to another hard drive, leaving the catalog where it is? - The Lightroom Queen. If you follow that, as soon as you confirm all your images are on the new hard disk, you can delete them from your internal one. She is not so clear about that part but if you don't delete the originals that you moved off you don't free up space. You should move the folder structure over to the new hard disk and then reconnect the folders in Lightroom. That should make it refind all your images.
That said, if you are uncomfortable with the computer in itself, your best bet is to find a local photography club. There is invariably a Lightroom savvy person in there that could help you move your files. That might be your best bet if you are uncomfortable moving these yourself. A general mac savvy person like you would find at an Apple store or so generally will not be able to help you with this except when they are photographers themselves and know Lightroom. You might get lucky with that.

Report on 'the number of calls' on an IVR Option menu

Dear NetPro gurus,
My customer has an IVR on UCCX which works fine. However, they have recently add in an 'Option 6' where when PSTN caller press on it, it will redirect the call out to an 1800 number onto the PSTN.
The call connects perfectly fine. What my customer wants is to have a report on how many PSTN caller press on this newly created Option 6 of the IVR.
For all the other 5 IVR options, they all have an individual CSQ assigned to them and there is a 'Set Enterprise Call Info' step to send the 'options selected' to UCCX.
However, for this Option 6, since there is no CSQ (because the call gets redirect to a PSTN number), is there any way i can script it so that it can be tally and identified by Cisco Historical Reports too?
I have spent a lot of time on this already so would appreciated if anyone can shed some light on this.
Cheers,
Hunt

Hi Hunt
There are quite a few posts on the subject on the forums.
Basically you can do one of these things:
1) Run an 'application summary' report - typically the count of 'flow out' calls will be the number of calls sent to your 1800 number, if this is the only non-CSQ destination that your script sends calls to (e.g. if there are no other external numbers, voicemail, or internal DNs that you send the calls to other than via a CSQ).
2) Run a 'custom call variables' report and then count up the number of rows that have the info that you set on 'set enterprise call info' when the call was routed externally
3) If those aren't good enough, then you can produce a custom report to show the data in the format the customer wants. This would require some good SQL and Crystal skills...
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Adding caller with name and number from call list to the contact list only inserts the number and not the name

I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
Regards,
Marc

Hey ViciousFerret,
It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
As you can see from the link below, Rogers and Fido have been offering this service since 2006.
http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
How can I get this feature request to BlackBerry for their consideration?
Cheers,
Marc

I want my serial number

I bought Photoshop CS5 Extended Teacher/Student edition 3 days ago. It has been nothing but problem after problem. First off, they sold me a Mac instead of a Windows version. Now I wasn't too upset about that because they gave me the windows version. HOWEVER, I showed my Student ID upon purchasing. How else would I get the discounted price for the software if I didn't. So now, It is three days later, several phone calls have been made and the main website is down and I can't validate my photoshop. To make matters worse, each photoshop comes with a trail. Well I can't use mine because I used the trail before I got photoshop, hence the selling point of Photoshop in the first place. So I have basically paid 200 dollars to sit and wait for a Serial Number. Which I have been waiting for 3 days to get and still can't because the website does not work. I called customer support, and they said to give it a few hours and the website would be on. I was hung up on several times. Transferred numerous times. And they even sent me an email saying my case was RESOLVED. It is far from resolved. You have my money, I want my serial number! It's theft basically! "You need to wait several hours and try again". "Oh but you can't use your photoshop until we verify that you are a student..." I thought that was the whole point of showing my ID to the sales associate. So he would give me the discount? Now that's not good enough for you and I have to wait for your approval as well? No...This is beyond ridiculous. You have my money, give me my serial number. I have a product number, Student email address that you can send the serial number to....I WANT MY SERIAL NUMBER

To help address performance issues the Identi-e web site is currently down for maintenance. If you are trying to redeem a product code to obtain your serial number for the Student & Teacher edition of our software you will currently be unable to do so. We would recommend installing the software in trial mode for the moment until the maintenance period is complete.

Discoverer Plus4i - Exporting to Excel - Your server is running low

We are currently running Discoverer Plus 4i.
We have a couple of large reports that we want to export to Excel.
We retrieve the report and then carry out the 'Export to Excel' action. The export starts to run but during the 'sort' phase we are getting the error "Your server is running low on virtual memory".
The largest report is currently retrieving about 64K rows but will grow by at least another 20K.
I appreciate we could restrict the retrieval through parameters but we were wondering if anyone had encountered this before and if there are any solutions out there.

Hi,
Any chance any of your items are created using custom functions/packages that return varchar's? If so, check you max char fetched (admin edition - properties tab, each item in folder(s) used by the report). The columns created by custom functions/packages will probably be 4000 characters. Excel doesn't like this. This also slows down your report. Wrap your custom function call in a substr and reduce to the correct size. This might fix your problem.
If you don't use custom functions/packages in this report, oh well, just a thought.
Regards,
Nancy

How can I block a number that calls me persistently every single day but only shows 3458 it does not show the full 10 digit

how can I block a number that calls me persistently every single day but only shows 3458 it does not show the full 10 digit so on your block page will not let me block it!!! So frustrated and I am not answering it with all the hackers out these days I don't want to give them access to my phone.

@lottsandy
I can understand your frustrations and concerns with receiving these unknown calls! I would love to assist you with preventing these types of calls.
Sounds as though you're receiving some type of telemarketing call. Although you're unable to add the shorter numbers to your call block list, you can definitely add your number to the National Do Not Call registry http://1.usa.gov/1whONxp. I hope this will help prevent those unwanted calls. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

Remove the number in call divert

Hi
I have a nokia X5800 and I have set up call divert and assigned another phone number to it. Now, how do I remove that phone number in call divert?
Any help will be appreciated. Thanks in advance.

Call divert is actually a network function. All your phone does is to facilitate this function by sending codes to your network. Have a look at this link. It lists the codes that are sent by the phone when setting up the call diverts. You also have the option of dialling the codes manually. Call divert settings can also be changed by contacting your network.
To change the divert number, you first deactivate the divert and you will be asked for the new number when reactivating. Alternatively just contact your network and ask them to do it for you. I find this simpler because there are just too many different types of diversion and it is easier to tell someone what you want then to try to figure out what each of them mean.

Your experience wanted: SE30: low number of calls, high nettime

Similar Messages

Maybe you are looking for