Youtube Audio keep reloading/overlapping - HELP PLS

'''Youtube Audio keep reloading/overlapping?'''
For the past few days, whenever I load a Youtube™ video, the audio will start up normally for a few seconds before another copy of the audio starts playing a few moments behind the first. This keeps repeating until the video becomes a jumble of overlapping noise!
The problem only seems to occur when I use the latest edition of Firefox™, I was able to view videos just fine when I tried it in Internet Explorer™. When I look at my browser tabs, it appears that the page is connecting and re-connecting repeatedly without the page being refreshed.
Is this a problem with the latest Firefox™ update? The problem did not start immediately upon updating, so I'm not sure.
Or something in the settings that makes it keep loading the audio over and over?
Any help is greatly appreciated!
ps. I'm on my work computer atm not my home one that it's happening to, I cannot look a Youtube™ here.
Please Help Me as I cant watch ANY Youtube due to the audio reloading bug.

just an update, I Closed FF and then started it in Safe mode with No Addon and tried a Youtube™ video and it played like it should with no problems. So I closed FF and reloaded FF in normal mode and it did the same Audio reloading/overlapping in Youtube™. I'm suspecting an Addon that may of been updated or when FF was updated could be the cause.
I'm going to turn each Addon off And reload a Youtube™ page to see if i can eliminate the Addon in question. What do you think?

Similar Messages

Youtube audio keeps playing after I hit back button.

Hi,
I've been having this issue on youtube when I hit the back button the audio from the video keeps playing, I've also noticed that it only seems to happen when the comment section gets stuck loading which is frequent even though I have a fast internet connection.

why do repliers keep suggesting to disable protected mode and harfware acceleration when that clearlyisnt a solution to this problem. are you robots?

Youtube audio keeps playing after I leave video page.

Video and audio play just fine but when I backtrack or close tab the audio still plays. If i reload the tab the audio will stop but i've never had this issue before. I have the most current firefox downloaded and have even deleted and re-downloaded the browser twice.

First you have two Flash Player installed
*Shockwave Flash 12.0 r0
*Shockwave Flash 11.5 r502
Try disable the hardware acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Pages with youtube videos keep reloading

Youtube works weird now: when video is played and I try to open commentaries branches, the page reloads (so the video starts playing from the beginning), and this happens only the first time (I can write and read commentaries after these reloadings) for every video I see. I tried deleting all my plugins, but this wouldn't work. What should I do?

Make sure that all of your extensions are up to date as well as [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Crashing during Export - I tried to export my sequence both in Premier and AME and it keeps crashing - Help Pls.

Crashing during Exporting - I tried to export my sequence containing several clips both in Premier and AME and it keeps crashing - Help Pls.

Thanks for your reply John.
My Premiere Pro is CS5.5 on Windows OS with all the recent updates installed.
My source footage is H.264 in a .mov/QuickTime format.
There were no error message(s) before the crashing. The computer just crashes after a few minutes of exporting. My output codec is also H.264 in a QuickTime movie format.
No other software is running at the time. Also, no third party codecs have been installed.
I'm not sure what type of engine I use. Kindly direct me to where I can find this information.
The problem has only happened with my final output.
Thanks Again.
Gloria

I have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??

i have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??

Have you tried "Run" instead of "Save?"
Do you have anti-virus software on the PC? If you do, try disabling the anti-virus for just 15minutes to allow the download to finish.
Hope one of those helps.

My iPad froze and it can't turn on. I've watched some youtube videos on how to restore my iPad. Occasionally, it worked on my friend's iPad, but not in mine. It can't restore because some sort of codes appear after I try to restore it. Help pls thank you

My iPad froze and it can't turn on. I've watched some youtube videos on how to restore my iPad. Occasionally, it worked on my friend's iPad, but not in mine. It can't restore because some sort of codes appear after I try to restore it. Help pls thank you

Your iPad has be jailbreaked . None here can help.

Error 4251 help pls....

i try to burn cd and all i get is error 4251 i have tried to reduced the speed but still i keep getting this error message any help pls from anyone....

Same thing has been happening to me. Hope someone can help!
I burned one CD (there was an error message after burning) and it doesn't play properly. Subsequent attempts to burn the same playlist - and I tried a different playlist too, just in case it was that particular album - result in the error message mentioned in the above posting. It starts to burn, then ejects the cd with the message "error 4251", even when I select a slower write speed. Diagnostics show no problem, but it seems to test only for reading, not writing. Here's the diagnostic message I got:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
TOSHIBA Satellite E105
iTunes 9.0.2.25
QuickTime 7.6.4
FairPlay 1.5.23
Apple Application Support 1.0.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number CBFABDA2556C6D0C
Current user is not an administrator.
The current local date and time is 2010-04-13 11:00:49.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
D: MATSHITA DVD-RAM UJ862ES, Rev 1.90
Audio CD in drive.
Found 16 songs on CD, playing time 71:31 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:44:53
Track 3, start time 10:03:39
Track 4, start time 14:58:64
Track 5, start time 18:14:34
Track 6, start time 22:28:43
Track 7, start time 26:49:15
Track 8, start time 31:10:28
Track 9, start time 35:54:08
Track 10, start time 40:10:03
Track 11, start time 45:14:58
Track 12, start time 49:45:24
Track 13, start time 53:44:07
Track 14, start time 58:27:16
Track 15, start time 62:43:45
Track 16, start time 66:39:60
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive D: MATSHITA DVD-RAM UJ862ES on CDR media at speed 8X.

DESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashing

LDESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashingRHi all. Hoping someone out there can help; I've been going around in circles for far too long on this.
Exec summary:
WinXP, SP3, Audio finally is working, Creative Console launches but crashes consistently. Diagnostics fails, on-screen could not install.
System:
WinXP, SP3
Story
I had an original X-Fi card that came with my Dell XPS70 3 years ago. Working perfectly, until I upgraded to WinXP, SP3 (from SP2).
BAM - lots of BSODs, always in ha20x2k.sys. Many times, all networking would just stop, and the BSOD would happen when shutting down the computer. Networking would fail 00% everytime I watched any kind of video (news, youtube, whatever).
Couldn't find more current drivers, bought X-Fi ExtremeGamer card from Frys. Could not get this to install off the package CD, new card was not recognized by Windows. Install would always hang on "On-Screen display" (I have a dual monitor system - should that matter?)
Eventually, downloaded more current drivers and console app from the Creative website and got audio working. Console will now launch but the moment I try to change something in the EQ panel, the console crashes, 00% of the time. Other Creative apps (e.g. diagnostics) fail with this error:? "The audio device supported by this application may not be present or may be operating in an unsupported mode..."
I haven't been able to "cleansweep" my system, the link in this (Creative) forum is broken.
REALLY hoping someone can help get this working... Have spent 2 days away from business to try to make this work properly, and am out of things to try.
Thanks,
Jerry

I should add - I have NO interest in gaming, just looking for high-end audio...

The video picture is hang but audio keeps playing

We are using FMS3.5 for VOD streaming. It’s spotted that when we are using Flash Player Version = WIN 10.0.42.34/10,0,45,2, it is encountered that the video picture is hang but audio keeps playing after our commercial break point. we will first pause the video content and then use the same object to play the instream ad. After that, the video is resume when instream ad complete.
Thanks for helping!

Hi,
Can you pls pass me the client side code?
Need to check if you are doing the right thing.
Let me know the type of VOD and ad contents you are using.
You can write me at [email protected]
Regards,
Janaki L

Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.

Pearl 8120: USB keeps reloading and reloading

I installed a MicroSD and now when I plug in my phone into the USB, the USB will load. However, it will keep reloading and reloading the drive making it impossible for me to transfer files using both the Mass Storage mode using 'My computer' or Roxio Media Manager. I tried changing the settings for Media card for auto enable mass storage when connected to 'yes', 'no', and 'prompt' but it still just keeps reloading, leaves the drive alone for 5-45 secs then reloads the drive. BTW, this is when I have both the desktop manager on and off. I have a feeling it has to be something with the mass storage mode because it worked fine before I put a micro SD card in it. Anyone else have this problem? Any solutions? Any Ideas?

Your OS .52 is quite old... upgrade.
Download and instructions are in this link. Pretty simple process. Just do your own backup FIRST, using Desktop Manager.
http://www.blackberryforums.com/general-8100-series-discussion-pearl/211527-latest-os-8120-4-5-0-302...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Safari keeps reloading on iPad mini

I have an iPad Mini. Safari keeps reloading with a message "A problem occurred with this webpage so it was reloaded". My IOS is up to date and I had restarted the iPad. I've also checked that the website is working on another iPad. Has anyone encountered this before? If so, please share. Thanks!

Hi melindachris,
Welcome to the Support Communities!
I'm not sure I understand how these two issues are related. I'm going to share with you a couple of articles that may resolve this issue.
First, close all open apps on your iPad, restart & reset it.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Reset iPad settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a74dc01
Reset iPad settings. Go to Settings > General > Reset, then choose an option:
Reset All Settings: All your preferences and settings are reset.
Open the Safari app. If you are still having issues connecting to the internet, follow these troubleshooting steps:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And finally, here are some specific steps in Safari that may be helpful, including:
iOS: Safari web settings
http://support.apple.com/kb/ht1677
To clear your history from Safari, tap Settings > Safari > Clear History.
To clear all cookies from Safari, tap Settings > Safari > Clear Cookies and Data.
To clear other stored information from Safari, tap Advanced > Website Data > Remove All Website Data.
I hope this information helps ....
Have a great day!
- Judy

How do you play YouTube audio with the screen off with iPod 5th gen?

I used to own a 2nd gen iPod touch, which ran on an ios 4.2.1 system, that allowed me to play YouTube with the screen off. Ever since I got iPod 5 which came with ios 7, let's say I am kinda still getting the hang of how everything works. I still would like to play YouTube while the screen is off, but seem to not know how. Does anyone know how to solve this problem? It's running on ios 8, so if you could help me with this, I would gladly appreciate it!

Hi there, you can download itube, it's in the app store, and that allows you to save youtube videos for offline play. Also, you can play youtube audio with the screen off, even without a third party app. Click on a video. When it's playing, press the lock button. Press it again, to wake the device up. You should see your video on the front of the display, with a play button. Click it, and it will start playing even if the device is off. Hope I helped, ~Samuel.

Audio keeps playing after I navigate away from page?

Hi
When I play media, for example a YouTube video, when I navigate away from the page the audio keeps playing. This is unique to Safari. Firefox doesn't behave in this way. Any ideas how to fix this?
Cheers.

1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
2. Safari > Preferences > Privacy
Press the button “ Remove All Website Data”.

Youtube Audio keep reloading/overlapping - HELP PLS

Similar Messages

Maybe you are looking for