Youtube error after some second of video

hy
sorry for my bad english for start but i'm italian.
Are some day that when i go on you tube and i play a video, it start, play some second,load,change all resolution of the video and finally get error . the time of video played are 7-20 second and after give error-
i have windows 8.1 64 bit

If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

Similar Messages

I start to play a video in youtube and after some seconds it frezze and never continues. Any solution?

I start to play a video in youtube and after some seconds it frezze and never continues. Any solution?

It always happen at 25 seconds.

Camera turns off after some seconds on my dell v131

When starting cheese(same with skype) in console it normaly start showing picture trom camera, but after some seconds it freezes and I get this output:
libv4l2: error dequeuing buf: No such device
libv4l2: error dequeuing buf: No such device
libv4l2: error dequeuing buf: No such device
libv4l2: error dequeuing buf: No such device
libv4l2: error dequeuing buf: No such device
** (cheese:1420): WARNING **: Failed trying to get video frames from device '/dev/video0'.
** (cheese:1420): WARNING **: Internal data flow error.
Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux
Bus 001 Device 021: ID 0c45:6441 Microdia
I think it worked fine earlier but I dont know what I updated when it stopped working.

If you have reset by holding down on the sleep and home buttons until the Apple logo appears and that doesn't help, try closing the app completely, then reboot the iPad. If that doesn't work, you might want to consider deleting the app and download it again. Backup your iPad with iCloud or iTunes and sync with iTunes if you delete the app so that you can restore the PDF files and books to the device.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You might have a PDF file that is corrupt and it might be causing this and if that's the problem, you will ultimately have to track down which file it is and delete it or this may never get resolved. That is probably unlikely, but it is a possibility nonetheless.

Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar

Hello to you
I have download game apps fifa 2014 from the app store of windows 8.1 32x on my laptop.
However, the game started to the mane screen and stopped suddenly.
The window of the game minimized to the manager toolbar on desktop and win I click on it the game work from the beginning and stopped like the first time and didn't work
Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar
   System Information Report
عام
                نظام التشغيل        Microsoft Windows 8.1 Pro
                المعالج المركزي        Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
                اسم المستخدم        amjad
العرض
                وصلة الفيديو        Intel(R) HD Graphics 3000
                ذاكرة الفيديو        1.15 GB
                دقة الشاشة        1366 x 768
التخزين
                إجمالي الذاكرة        2.67 GB
                الذاكرة الحرة        1.05 GB
                مساحة القرص الصلب        296.54 GB
                المساحة الحرة        176.65 GB
I/O
                الفأرة        Samsung PS/2 Port Input Device
                لوحة المفاتيح        Standard PS/2 Keyboard
نظام الكمبيوتر
                اسم الكمبيوتر        SUMSUNG-I3
                اسم المستخدم        [email protected]
                المنظمة        N/A
نظام التشغيل
                اسم نظام التشغيل        Microsoft Windows 8.1 Pro
                إصدار نظام التشغيل        6.3.9600
                معرّف المنتج        00261-50000-00000-AA602
                وقت تشغيل النظام        17/06/2014 23:34:21
                إصدار الأنترنت إكسبلورر        11.0.9600.17126
                DirectX إصدار        DirectX 11
                OpenGL إصدار        6.3.9600.16384 (winblue_rtm.130821-1623)
الريجستري
                أقصى حجم        682 MB
                الحجم الحالي        104 MB
                الحالة        OK
المعالج المركزي
                اسم المعالج        Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
                اسم الكود        N/A
                المنتج        GenuineIntel
                السرعة الحالية        2200 Mhz
                أقصى سرعة        2200 Mhz
                Voltage        1.2V
                الساعة الخارجية        100 Mhz
                الرقم التسلسل        BFEBFBFF000206A7
                معرّف المعالج        x64 Family 6 Model 42 Stepping 7
                مأخذ التوصيل        CPU
                L1-Cache        64 KB
                L2-Cache        256 KB
                L3-Cache        3072 KB
اللوحة الأم
                الطراز        300E4A/300E5A/300E7A
                المنتج        SAMSUNG ELECTRONICS CO., LTD.
                الرقم التسلسل        123490EN400015
                BIOS اسم        Phoenix SecureCore-Tiano(tm) NB Version 2.1 01QA
                BIOS منتج        Phoenix Technologies Ltd.
                SMBIOS إصدار        01QA
                BIOS تاريخ        05/09/2011
BIOS ميزات
                PCI is supported        نعم
                BIOS is Upgradable (Flash)        نعم
                BIOS shadowing is allowed        نعم
                Boot from CD is supported        نعم
                Selectable Boot is supported        نعم
                EDD (Enhanced Disk Drive) Specification is supported        نعم
                Int 5h, Print Screen Service is supported        نعم
                Int 9h, 8042 Keyboard services are supported        نعم
                Int 14h, Serial Services are supported        نعم
                Int 17h, printer services are supported        نعم
                Int 10h, CGA/Mono Video Services are supported        نعم
                NEC PC-98        نعم
                ACPI supported        نعم
                USB Legacy is supported        نعم
مورد الذاكرة
                إجمالي الذاكرة        2.67 GB
                الذاكرة المستخدمة        1.62 GB
                الذاكرة الحرة        1.05 GB
                استخدام الذاكرة        60%
الذاكرة الفعلية
                صرف الذاكرة        BANK 0
                الوصف        Physical Memory 0
                محدد الجهاز        ChannelA-DIMM0
                المساحة        2.00 GB
                السرعة        1333 Mhz
                المنتج        Hynix/Hyundai
                عرض البيانات        64 bit
                نوع الذاكرة        Unknown
                عامل النموذج        SODIMM
الذاكرة الفعلية
                صرف الذاكرة        BANK 2
                الوصف        Physical Memory 2
                محدد الجهاز        ChannelB-DIMM0
                المساحة        2.00 GB
                السرعة        1333 Mhz
                المنتج        Hynix/Hyundai
                عرض البيانات        64 bit
                نوع الذاكرة        Unknown
                عامل النموذج        SODIMM
الأقراص الصلبة
                الاسم        SAMSUNG HM321HI
                نوع الوسائط        Fixed hard disk media
                الحجم الكلي        298.09 GB
                نوع الواجهة        IDE
                عدد الأقراص        3
                إجمالي الأسطوانات        38913
                إجمالي الكليّة        255
                إجمالي القطاعات        625137345
                مجموع المسارات        9922815
                المسارات لكل اسطوانة        255
                بايت لكل قطاع        512
                قطاعات لكل مسار        63
                S.M.A.R.T دعم        نعم
                درجة الحرارة الحالية        0C (32F)
CD-ROM Drive
                الاسم        TSSTcorp CDDVDW SN-208BB
                القرص        E:
                معدل النقل        -1
                الحالة        OK
IDE تحكم
                الاسم        Standard SATA AHCI Controller
                المنتج        Standard SATA AHCI Controller
                الحالة        OK
وصلة الفيديو
                الاسم        Intel(R) HD Graphics 3000
                معالج فيديو        Intel(R) HD Graphics Family
                المنتج        Intel Corporation
                فيديو فن العمارة        VGA
                DAC نوع        Internal
                حجم الذاكرة        1.15 GB
                نوع الذاكرة        Unknown
                وضع الفيديو        1366 x 768 x 4294967296 colors
                معدل التحديث الحالي        60 Hz
                إصدار التعريف        9.17.10.3347
                سجل الأحداث        29/01/2014
جهاز العرض
                الاسم        Generic PnP Monitor
                ارتفاع الشاشة        768
                عرض الشاشة        1366
                الحالة        OK
Ethernet
                اسم المنتج        Realtek PCIe GBE Family Controller
                اسم الخدمة        RTL8168
                المنتج        Realtek
                MAC عنوان        NULL
Wi-Fi
                اسم المنتج        Intel(R) Centrino(R) Wireless-N 130
                اسم الخدمة        NETwNs32
                المنتج        Intel Corporation
                MAC عنوان        DC:A9:71:7A:A9:3B
Local Area Connection
                اسم المنتج        TAP-Windows Adapter V9
                اسم الخدمة        tap0901
                المنتج        TAP-Windows Provider V9
                MAC عنوان        NULL
أجهزة الصوت
                الاسم        صوت الشاشة من Intel(R)‎‎‎
                المنتج        Intel(R) Corporation
                الحالة        OK
الفأرة
                الاسم        Samsung PS/2 Port Input Device
                المنتج        ELAN
                الأزرار        0
                الحالة        OK
لوحة المفاتيح
                الاسم        Standard PS/2 Keyboard
                الوصف        Enhanced (101- or 102-key)
                وظائف المفاتيح        12
                الحالة        OK
USB أداة تحكم
                اسم المنتج        Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
                المنتج        Intel
                بروتوكول معتمد        Universal Serial Bus
                الحالة        OK
USB أداة تحكم
                اسم المنتج        Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
                المنتج        Intel
                بروتوكول معتمد        Universal Serial Bus
                الحالة        OK

http://apps.microsoft.com/windows/en-us/app/fifa-14/e89c9ccf-de94-45ed-9cd4-7e11d05c3da4
System requirements
OS: Windows 8
CPU: 1.8G core2duo
RAM: 1G
GPU: NVidia card 7800 GT+ with 512M+ vram
This game is not fully optimized to work with some ATI GPU cards.
Keyboard support is not available.
try to contact game manufactured, maybe your GPU doesn't meet requirement

Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

We cant upgrade

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hello:
I am not being critical, but you seem to want Safari to behave exactly like Chrome. Every software developer has a plan. Sometimes features in one product parallel other products - sometime not. There might be some things available that would help you. Do not hold your breath, however, for suggestions from people who use these forums. Most of us use (and like) Apple products. If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
I use Safari (and have for years). I use Firefox (not a bad product) as my alternate browser.
Sorry for what appears to be a pedantic lecture. However, I think most of us adapt to different products if we really want to use them.
Barry
Message was edited by: Barry Hemphill

Upgraded iTunes 9 fails after some seconds

Hi, after successfully installing iTunes 9 on Windows XP (upgrade from 8.x.y) I may start iTunes, click and use the GUI for some seconds,
even start playing a song, when Windows stops iTunes and an error report is sent. Re-installing did not help, nor did moving the *.itl help.
Any ideas?
P.S. The "Exception Information" in the error report states a Code 0xc0000005,
iTunes has a FileVer. 9.0:0.70)

Just to tell what helped:
1. start iTunes with the network cable disconnected, stop it
2. reconnect the cable
3. restart iTunes
Whatever that means ..

CRM Pricing error after 5000 seconds with CRM_ORDER_MAINTAIN in background

Hi,
This is Rajender. I am using function module CRM_ORDER_MAINTAIN to create sales order. I am facing a error while creating sales order from text file. while uploading 15000 records it is taking more than 5000 seconds. But after 5000 seconds the background job gets cancelled raising the error "Error occurred when processing Java programs".
Can anybody please tell me why the error is coming.
I am using the following sequence to create sales order.
CRM_ORDER_MAINTAIN - To create sales order header
CRM_ORDER_MAINTAIN - To create Item - Product, quantity, partner, manual price.
CRM_ORDER_SAVE
CRM_ORDER_INITIALIZE
Thanks & Regards,
Rajender Naik.

Hi Rajender,
Try using the FM CRMXIF_ORDER_SAVE which is more of like an interface FM and its better to use this FM for interfaces/data loading. We had issues with using crm_order_maintain FM and had to replace with this one.
Refer to this below link on how to use this FM for a specific scenario-
http://www.divulgesap.com/blog.php?p=MTEy
Hope it helps.
Cheers,
Ravikiran

Display quite dark after some seconds and stays da...

The display gets quite dark after some time (10 seconds?),
eg. during internet surfing or email checking, even if the light sensor is in MAX position. Also removing the hand or the fingers away from the screen (light sensor coverage) the display stays too dark....until I close this app (with the function key), the display gets bright again, unfortunately the app (eg. internet) then is closed :-(

But there I can't make any changes. If I do so, it changes the profile to "own settings" automatically. But I wannne keep the "normal" and "higher perfomance" settings.
And by the way; I can't change the time, the display shades. Only if it does or not. "Lower monitor brightness automatically befor go to standby", and if I would disable it, I would change the profile as written above - and that's not what I want.
MacBook Mac OS X (10.4.8)
I just want to increase the time the display gets darker.

No audio after 15 seconds of video

so i can play a video on my new ipod, sounds and looks great, but after 15 seconds or so, the movie pauses for a second, and then continues without sound. the sound is fine thoughout the whole video in itunes and also in quick time, but not on my ipod after that first 15 seconds. does anyone have a solution to this ? any help or advice in greatly appreciated.

hiya!
first check the ipod software version on your ipod:
iPod: How to find software version
if it says 1.1, see:
Video created with third-party software plays incorrectly on iPod
love, b

BFF62048 Error after some time

Hello everyone,
I need CAN to communicate between a converter and our test cell. I use an NI PCMCIA-CAN/2 Card and LabVIEW 2012 SP 1. My program works fine but after some time I get an the error BFF62048. I know what it means but I don't know where the problem is nor how to solve it.
I use the Channel API for programming the CAN-communication.
The problem is I need to write at different timings on the can. Some messages need to be sent at 12ms others at 100ms. Therefore I initialized the messages in different tasks.
For CAN 1 have 1 readtask and 4 writetasks. For CAN 2 I have 1 readtask and 2 writetasks. I hope it is not too much for this little card.
The readtasks were both executed at 10ms after each other. The writetasks are executed in several parallel loops, except for one writetask. I need to send back an "alive value" immediately, so I read a value from my CAN-read-array and put it back on the CAN with a writetask. Which means I have to access the card 3 times in one loop.
I reduced the execution of my CAN-read-loop from 10ms to 20ms and the program runs much longer. (from ~30 min to 4 hours)
In my opinion the problem should occur immediately after I started my program not after some hours.
If someone have some advices for me, that would be great.
Thanks,
Rino

I use Labview 2012 (fully updated). Driver Version is 2.7.4
I don't think there is a problem with the bus load. Only 50 % of the capacity is used.
Unfortunately we are in lack of hardware, but I'm sure my code will work on a "real" PCI-CAN card. Is it possible, that the PCMCIA-card maybe has a problem with too many tasks? I couldn't find any information regarding the task limit in the hardware specification or I'm blind
I attached the project as *.zip file. I had to remove the can database files (*.dbc) because they are confidential.
Attachments:
Abnahme_629.zip ‏1058 KB

Video streams in some apps stop after some seconds (S6000)

Hi,
In the apps DEL and Laola1.tv, video streams start with the first ~5 seconds, then stop, then repeat once and then stop.
Problem does not occur with android phone or laptop in the same wlan. Other streaming like youtube works fine.
Any hints or ideas greatly appreciated.
Lenovo IdeaTab S6000, Android 4.2.2
Thanks,
Sven

I already have radeon.modeset=0 on the end of my kernel line, I think I disabled KMS a month or two ago when it was (very briefly) enabled by default. IIRC my system was very broken with KMS enabled back then, I haven't tried turning it back on.
I've found xf86-video-ati-6.12.4-3 to work, and xf86-video-ati-6.12.192-1 not to work, irrespective of ati-dri version. I've just noticed 6.13 seems to be out, so I may try building that with ABS, and see if it fixes it.
EDIT: or maybe I won't, as that needs xorg 1.8 and I don't have enough time to build that and all it's deps just now
For now I've just set pacman to ignore the package, which works as a temporary solution. Are there any diagnostics I can do to help pin down the problem?
Last edited by Jack B (2010-04-20 22:05:07)

Trying to access https site with a cert, got "The connection was interrupted" error after 30 seconds of waiting time before clicking on OK. But I can get in by clicking on Try Again button.

I have a web site running on https. Every users need certificates to get in.
I found out that if I didn't submit my cert within 30 seconds, Firefox displayed "The connection was interrupted". This problem is repeatable. But if I click on "Try Again" button on the error page, I can get in all the time.
This problem doesn't happen on IE.
Can you provide any tips to avoid seeing the error page?

It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
7.0.0.70 is the verion I just installed.
Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

How to get a value from php after some seconds?

Hello,
Does someone know how to do the following thing?
I want to read a value from a php file with this method :
request.method = URLRequestMethod.POST;
But when you do this, the php file is excecuted and the
variables will be read.
But what if you have a check in your php and after a few
seconds the php will send a value to flash.
How do you retreive this value without executing the php file
again? Or is it normal to execute this again?
I really don't know.
I remember in AS 2.0 you could do something with:
onEnterFrame = function() {
loadVariablesNum(mailform, 0);
if(_root.action = "go") {
gotoAndPlay(20);
delete this.onEnterFrame;
But in actionscript the are many eventhandlers, but i could
not find something that will
scan for the value ? Does anyone have an idea to do this in
actionscript 3.0?

You said:
so when using the complete event listener, does it mean:
a) It returns complete with loading the script of the php
code from line 1 to
50 (example) ..like loading an external text file.
Actually that's not how the Flash Player works. Flash doesn't
really know anything about your PHP code. What happens in a typical
scenario is:
1) Some user on some computer far away asks your server for a
web page with your SWF page embedded. Your server sends the SWF
file.
2) The Flash Player starts executing on the user's computer.
It loads the SWF file and starts executing the action script.
3) The Flash Player on the user's computer comes to the AS
code that loads a URL request. Over a new connection it sends a
request to your server for a certain URL. It doesn't really care
that it is PHP that will fulfill the request; as far as it is
concerned, it's just asking for a URL.
4) Your server receives the request, executes the program in
PHP, and starts sending bytes to the Flash Player on the user's
computer.
5) Back in the Flash Player on the user's computer, if your
actionscript code starts looking at the .data property of the
URLLoader, it will see the response so far.
6) Back on your server, eventually the PHP program finishes,
sends the last of its data, and the web server closes the
connection.
7) The COMPLETE event fires on the URLLoader; if you have a
listener defined, it executes.
Hope this helps,
Bob

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

Youtube error after some second of video

Similar Messages

Maybe you are looking for