Z Programs accessed by a user

Hi All,
How can i see find out info about the users who have accessed (not changed ) the Z (ABAP) programs in the past one month.

Hi Kumar,
As already most replies have stated:
Use transaction STAT. This is the correct transaction. But it is also very tricky. If you need to collect a full month, the best way is to run the related program in the background (btw. Not RSSTAT21, because this is the popup screen for the parameters).
You can use the following parameters to fill:
User [* ]
Transaction [* ]
Programma [Z* ]
Task type [*]
W.Process..... [* ]
Start date [03.05.2005]
Start time [00:00:00]
End date [03.06.2005]
End time [24:00:00]
Number of recs [10000 ]
Leave the rest empty
You must see, that the parameter Number of recs MUST be filled (otherwise your default user amount will be used).
When using a small amount, with the buttons on the report screen you can collect next pages.
The here proposed settings will take an long time to process. If not on a fast system, you should use report RSSTAT20 in the back-ground. But keep in mind, that you need to use the 'EXPORT' construction in RSSTAT21 to place the parameters in memory.
Therefore you probably need to write your own routine.
Hope this will help you.
Regards,
Rob.

Similar Messages

MS Office Program Accessibility from Different Users

I have OS 10.8.4 and am running MS Word 12.3.6. I can access all the MS programs just fine with my user account. My wife and son can no longer access the MS programs with their user accounts. Every time they try to open any MS program they get the registration program. We try to register and it tells us we don't have to do that but it will still not open the programs. Anyone?
Thank you.

Have you contacted Microsoft? They have help forums at http://www.microsoft.com/mac

Restrict program access ( only three user at a time)

Hi
I want to restrict the program only two users at a time ( with out using authorization object ).
Thanks & Regards,
K.Gunasekar.

Just an idea:
create a table with one column to store the userid. Each time the program ist started, you execute a SELECT COUNT( * ) on that table and EXIT from your program as soon as the table contains more that 2 entries. In case the table does not contain more than two entries, you can proceed after adding the SY-UNAME to that table. At the end of the prgram you have to delete SY-UNAME from that table.

HT1926 when i try to download itunes 11 my computer stops the download and displays the message could not access network location #user profile%\start menu\programs\startup\

when i try to download itunes 11.1 or any updates i get the message could not access network location #user profile%\start menu\programs\startup\. any help

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Error...java.sql.SQLException:Access denied for user

Hi,
I am getting the following error message while connecting with the MySQL .(O/S :Sun OS 5.6)
Error.....java.sql.SQLException: Invalid authorization specification: Access denied for user: 'some_user&password@localhost' (Using password: NO)
Note that i have given all permission to the user using,
GRANT ALL PRIVILEGES .......................
The code i have used to connect with the database is,
import java.io.*;
import java.sql.*;
class test
public static void main(String a[])
try
Connection con;
Statement stmt;
ResultSet rs;
Class.forName("org.gjt.mm.mysql.Driver");
con=DriverManager.getConnection(jdbc:mysql://localhost/db_name?user=some_user&password=some_pass");
stmt=con.createStatement();
//do something with resultset
catch(Exception e)
System.out.println("Exception in second try.."+e);
plese guide me on this problem to solve.
Thankz,
Bala.

Hi friends...
I've read the last post...
The problem that I have is as follow....
1. I have installed on my machine MySQL 5.0 Server running
1.1 I have a database called "base1"
1.2 User "root", password "works"
1.3 I have the following sentence to connect it using JDBC
Connection con = DriverManager.getConnection("jdbc:mysql://localhost/base1", "root", "works");
More notes:
- I use the JDBC 5.0
- My Machine is a Windows XP SP2 Pentium 3.0 512Mb
and it connects��
but I have this environment to develop applications, now that I want to connect to Production Environment happens the following:
2 The Production database is mounted on a Linux Server with MySQL 3.2.
2.1 I change the sentences as follow:
Connection con = DriverManager.getConnection("jdbc:mysql://192.168.0.7/base1", "user", "password");
2.3 But a message appears when I run the Java Program:
java.sql.SQLException:Access denied for user: '[email protected]' (Using password: YES)
2.4 As you can see it changes the IP Address...
More notes:- I have the MySQL Query Browser and I got connection.
- The IP that display the Error Message is my Second IP configurated on my Network Properties.
- Server is a Pentium 4 3.0 GHz 2Gb Linux Red Hat 3.0
I leave this case for the spider... I hope that somebady has the solution.
What is the problem? Why the JDBC doesn't respect the IP that I wrote.

Program with Back Ground User.

Hi ,
In my development we are sending data from MDM to R3 through XI.
Here iam having the following issue:
When sending IDOC's from XI to R3, some of the IDOC's are struck in Queue with status 64 and, those not going to be processed at all. This is because of the unavailability of the work processes at that time. All this is done through the back ground user XIS_REMOTE.
Iam trying to process the unprocessed IDOC's through a standard program, all the IDOC's are processed, but the data created under the Fore Ground user (i.e. my id).
I want to know is there any possibility to run or write the program using back ground user XIS_REMOTE so that all the unprocessed IDOC's will process and get the back ground user XIS_REMOTE.
Any inputs appriciated.
Best Regards
Shyam Reddy.

ST05 you can trace SQL-statements and get expainings how these statements are being worked upon by the database. this is more a tool for investigating the performance of abaps on your 'special' database.
since you posted your request in the security forum i will assume that you want to do an authority trace. use tx. ST01 instead of ST05. Set the filter options to the program and/or user you want to trace and flag the areas you want traced like 'authority check' 'database access' 'kernel commands' ...
activate the trace using the matchlight-icon. run the background job to be traced. stop the trace after a sufficient time (or until the job hits the error you want to investigate). then press 'evaluation' and check the boxes for the lines to be displayed again ...
if both my answers don't fit to your problem come back here and state a bit more precisely what your problem is, maybe we find another approach to it.

Securing the HR data against unauthorized ABAP program access

Dears,
Is there a way to secure HR data against unauthorized user-defined ABAP program access; in other words is there a way to prevent a the HR tables access from within a newly created ABAP program (SELECT statement) ?
Thanks.
Reda

Hi, there's no way to prevent programs from accessing db-tables. Instead, you'll have to limit access on programs.
Especially, do not allow abap developers to run programs in your productive system. Encourage developers to implement authority-checks in their code. Consider well, who and who not, is to be allowed to run which program.
regards
Jörg

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

Refuse the access to the users when the data is loading in cube

Hi Sap Guy's,
I have a typical requirement from my client side.
Requirement:
While loading data in CUBE update we want have the application that refuse the access to the User's by showing a message u201C The BW cube u2026. is loading please try lateru201D.
With this scope we have to modify the chain. Set a parameter before start the cube update and reset the parameter when the cube update is ended.
The query must be modified for checking the parameter value said above and allow the access or not to the cube.
Kindly propose a suitable solution for the same.
Thanks In Advance,
Krishna.

Hi,
This is simple. Create a text element in query description and hardcode this with any dummy value (say the cube name). Fill this text element during i_step = 1 in exit. Use this text element for all the queries on the cube foor which you want this popup message. Then in TVARV table create a field as flag. Before the cube is loaded mark this flag field as X using ABAP program in process chain and once the cube is loaded delete the X for the field. In the exit check in I_STEP = 3 check whether your text element is populated or not. If it is populated this means your query is getting executed. Then check whether your flag field is X or not. If it is X then using the FM raise a popup message RRMS_MESSAGE_HANDLING and after this use the statement raise no_processing. This will return you to selection screen.
Search the forum for more info abt how to write the code in I_STEP = 3.
Regards,
Raghavendra.

Accessing the Logon User Exit from the Internet using an ITS Service

I can access the Logon User Exit (EXIT_SAPLSUSF_001) from R/3, but not from the Web using an ITS service. What am I missing in order to access the Logon User Exit from the Web. The ITS service was created from an ABAP screen program.
Thanks
david yee

The SAPGui logon exit is called after successfull authentication has been completed and after a SAPGui session has been attached.
If you logon via RFC, WebGui, ICM or the Wgate then this exit does not trigger.
What are you wanting to add to your code after the logon ?
An solution I have used is to create a wrapper RFC for a BAPI and create a webservice for the wrapper. Before calling the BAPI you can do whatever you want to from a security perspective.
But for that you need to have an appropriate BAPI...
Please explain what you want to do and what you would have wanted in the exit. Often there is a better way.
Cheers,
Julius
ps: I moved this to the security forum.

What program access hard disk every 30 second?

I have a very loud hard disk. The hard disk make a very short noice every 30 seconds, even for a new boot. Anyway to check which programming access the hard disk repeatly so I can figure out if it's possible to make the machine quiet?

somthing I read about disk flush/sync timings. There is some sort of 'laptop' mode in some kernels that if set will cause the disk to sync after a period of time in order to let APM/ACPI put the drive to sleep.
There may be settings for your filesystem to do the same(!?). I remember old Windoze NT4 had similar problem and was not remedied until Win2k for use on laptops .... yuck, ... I said the W word.
Here's something I just dug-up:
Laptop mode ===========
This small doc describes the 2.4 laptop mode patch.
Last updated 2003-05-25, Jens Axboe <[email protected]>
Introduction ------------
A few properties of the Linux vm makes it virtually impossible to attempt to spin down the hard drive in a laptop for a longer period of time (more than a handful of seconds). This means you are lucky if you can even reach the break even point with regards to power consumption, let alone expect any decrease.
One problem is the age time of dirty buffers. Linux uses 30 seconds per default, so if you dirty any data then flusing of that data will commence at most 30 seconds from then. Another is the journal commit interval of journalled file systems such as ext3, which is 5 seconds on a stock kernel. Both of these are tweakable either from proc/sysctl or as mount options though, and thus partly solvable from user space.
The kernel update daemon (kupdated) also runs at specific intervals, flushing old dirty data out. Default is every 5 seconds, this too can be tweaked from sysctl.
So what does the laptop mode patch do? It attempts to fully utilize the hard drive once it has been spun up, flushing the old dirty data out to disk. Instead of flushing just the expired data, it will clean everything. When a read causes the disk to spin up, we kick off this flushing after a few seconds. This means that once the disk spins down again, everything is up to date. That allows longer dirty data and journal expire times.
It follows that you have to set long expire times to get long spin downs. This means you could potentially loose 10 minutes worth of data, if you set a 10 minute expire count instead of just 30 seconds worth. The biggest risk here is undoubtedly running out of battery.
Settings --------
The main knob is /proc/sys/vm/laptop mode. Setting that to 1 switches the vm (and block layer) to laptop mode. Leaving it to 0 makes the kernel work like before. When in laptop mode, you also want to extend the intervals desribed above. See the laptop-mode.sh script for how to do that.
It can happen that the disk still keeps spinning up and you don't quite know why or what causes it. The laptop mode patch has a little helper for that as well, /proc/sys/vm/block-dump. When set to 1, it will dump info to the kernel message buffer about what process caused the io. Be very careful when playing with this setting, it is advisable to shut down syslog first!
Result ------
Using the laptop-mode.sh script with its default settings, I get the full 10 minutes worth of drive spin down. Provided your work load is cached, the disk will only spin up every 10 minutes (well actually, 9 minutes and 55 seconds due to the 5 second delay in flushing dirty data after the last read completes). I can't tell you exactly how much extra battery life you will gain in laptop mode, it will vary greatly on the laptop and workload in question. The only way to know for sure is to try it out. Getting 10% extra battery life is not unrealistic.
Notes -----
Patch only changes journal expire time for ext3. reiserfs uses a hardwire value, should be trivial to adapt though (basically just make it call get_buffer_flushtime() and uses that). I have not looked at other journalling file systems, I'll happily accept patches to rectify that!

How can I grant Application access to a user via API ) programattically

how do I grant access to a portal user from API
I want to grant access to a user from an API, ie I need a
command to grant "SCOTT" access to "EXAMPLE_APP" APPLICATION as
an end user?

Hi,
I am assuming that you have already updated the EUL in the Administrator Edition, correct? If not, open Discoverer Administrator and login to the database you want to connect to. You must use your EUL user name which I assume has already been created and assigned the correct privileges in the database. You will be asked to update your EUL. Follow the prompts.
Once logged into the EUL, go to Tools \ Privileges and find the user that you want to give administrator access to.
Hopefully, this answers your question.
Regards,
Nancy

How to access a Portal User Info from a J2EE application?

Hi,
I have deployed a j2ee application in portal and its running fine.
from that application i need to assign some roles to some users.i have the user id.
so my doubt is can i access the portal user info from this j2ee application?i have some servlets in the j2ee application....can i get the portal user info from this servlet?
plz help me
regards,
Visweswar

Hi,
Please check out this to get the portal user information from Java -
WdClientUser class/Interface to aciehve this.
Please check out these links on the same -
WDClientUser.getClientUser IUser
help needed
Regards
Lekha

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

How do I access the End User Licensing Agreement? I clicked on it and it gives me a message that I need to launch Adobe Reader, accept and close and reopen. Trouble is I can't get to an icon for file to launch. I am working on a Mac and have installed Mac

I am using a Mac and have installed Adobe Reader for Mac, latest version. I cannot access the End User Licensing Agreement. I clicked on it and it gives me a message that I must launch Adobe, check that I agree, close and reopen. The problem is I can't find any way to launch Adobe because it appears nowhere on my launch pad, nor in my document files or on the control panel. Because of this, I cannot print bank statements nor can I get into my insurance companies billing department to make a payment. HELP!

How about in your Applications folder?

Z Programs accessed by a user

Similar Messages

Maybe you are looking for