Z programs, Z tables, and Z transactions

Good day everyone,
If I want to see the code behind a Z program, how do I look that up?
Also, is there code behind Z tables and Z transactions? If so, how do I look that up as well?
Thanks,

Are you really asking how to see program code?
Please search for available information before asking such extremely basic questions.
Thread locked.
Thomas

Similar Messages

How to read tables and fields transaction,how to find table from a strucre

hi all,
i am having problem in reading tables and fields for developing a customised report. can anybady help me how to extract tabele and fields from a transaction code and how to map table from a structure.
It will me much help full, if u had any documentation. u should be appreciated.
Thanking u
kiran
Message was edited by:
kiran

Hi Kiran,
You can make use of the tables or Views available.
Reward If Useful.
Regards,
Chitra

GL balances table and asset transactions

I would like to know the tables where I can find the information for GL balances monthwise and which tables to look for in asset accounting for Asset transactions like acquisitions, retirements depreciation etc monthwise.
Any clarifications will be appreciated.
Thanks
Krishna

Hi,
Try to look into these tables:
SKA1     G/L Account Master (Chart of Accounts)
SKAT     G/L Account Master Record (Chart of Accounts- Description)
SKB1     G/L account master (company code)
AGKO     Cleared Accounts
ANAR     Asset Types
ANAT     Asset type text
ANEK     Document Header Asset Posting
ANEP     Asset Line Items
ANEV     Asset downpymt settlement
ANKT     Asset classes- Description
ANLA     Asset Master Record Segment
ANLB     Depreciation terms
ANLC     Asset Value Fields
ANLH     Main asset number
AT02T     Transaction Activity Category- Description
AT02A     Transaction Code for Menu TIMN
AT10     Transaction type
AT10T     Name of Transaction Type
Is it helpful?

Spatial Index and XA transaction

Hi all,
I have problem with spatial index in XA transaction.
java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-29400: data cartridge error
ORA-14450: attempt to access a transactional temp table already in use
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 623
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 227
My configuration Java 5, Tomcat 5.5, UserTransaction manager Bitronix.
The problem disappears after dropping spatial index.
sql statement:
INSERT INTO ICING_SPATIAL.MAP_ISSUES ( FEATURE_ID, GEOMETRY, AUTHOR_ID, ISSUE_ID, ISSUE_STATUS, LANGUAGE, SOURCE, TEXT) VALUES ( ? ,SDO_MIGRATE.TO_CURRENT( ? , ( SELECT DIMINFO FROM ALL_SDO_GEOM_METADATA WHERE OWNER = ? AND TABLE_NAME = ? AND COLUMN_NAME = ? ) ), ? , ? , ? , ? , ? , ? )
Full stacktrace is:
java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-29400: data cartridge error
ORA-14450: attempt to access a transactional temp table already in use
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 623
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 227
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:212)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:951)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3285)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3368)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4245)
All user transactions are commited or rollbacked because the DBA_2PC_PENDING is empty: SQL> select * from SYS.DBA_2PC_PENDING;
no rows selected
SQL>
This problem occures regulary after any 2PC transaction has been rolledback. The next request causes this exception. Sometimes it appears after commit too, but I am able to reproduce it within ten or twenty requests.
Has anybody had simillar problem?
Thanks for any suggestions how to check what is going wrong.
Regards,
Zdenek Vrablik

The problem is in Oracle Spatial.
Oracle database don't support Temporary tables and XA transactions together. Oracle Spatial uses temporary tables.
Possible solution (I am using)
One database connection(nonXA) to read data and one connection(XA) to insedt/update/delete data including spatial data.

Interface and Base tables for Receiving Transaction Processor Program

Hi Everyone,
My requirement is to move data from staging table to rcv interface tables and then run Receiving transaction processor program. How will in know what interface tables i need to insert data into? and after I run the concurrent program what are the base tables that i need to check to confirm?
Please help!
Thanks
Sunny

RCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi

Payment Program Creation Date and User (is this in any table in SAP R/3)?

Dear Experts!
The treasury guy asked me whether there would be a way to recover the "Payment Program" Creation Date and Created by (User) from Payment Program Executions (F110 transaction).
I searched on the REGU* tables and I didn't find out this information.
Does anybody know whether there is any table where this is recorded?
NOTE: We cannot use the information from "Proposal Log" because the log is removed from the Productive System and only the last 3 (three) days are remaining.
Thanks and Kind Regards,
Daniel Carvalho.

Hello "The Wirtschaftsmann",
Thanks for the reply. However, I need the Creation Date and Creation by of the Proposal / Payment Run steps.
Not sure if this information is available nowadays at SAP. I opened an incident with SAP, let's see what they reply to us.
Regards,
Daniel

Create a table and upload data in MS ACCESS from SAP ABAP programming?

Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.

Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

How to find tables and fields in the standard program.

Hi to all,
              I am very new to ABAP,
            i am willing to write Report ,that is if i enter the vendor number i have to get item,quantity , name...with dateetc....
My approach was : i went to ME2L and i gave vendor number and date in that then i got some data ,then i got the program of that list ( it was there in bottom right) i.e, SAPMSSY0 .
           Then i entered in SE38,in that i go with Display Object LIst to find out the tables and fields,but i failed to found.
My question is : I can write the reports if i know the fields and tables location....
                          Here i want to know the ,if i enter the Vendor No, i have to get the regarding information about that NO,_for that i have to know the fields and tables_ of item and cost ....every thing ...
       if my question was not clear please ask me i will explain you again...
      Can you help me how to find...
Thanks in Advance
Bhanu.

Hi Bhanu,
   Goto transaction SE84 then follow the path
SE84-->ABAP DICTIONARY--->FIELDS---->TABLE FIELDS-->ENTER THE TABLE OR FIED NAME you want to find
    and EXECUTE the programm you will get all the information regarding that field or table.
    Hope this solves your problem.
Thank you,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Sep 1, 2009 12:57 PM
Edited by: PAVAN CHANDRASEKHAR GANTI on Sep 1, 2009 12:58 PM

What are lot transaction register report source tables and views?

I have a request to create a custome report duplicating all the fields in the standard "lot transaction register" report in EBS 12.1.1. How can I find all the tables and views used in this report or any standard report for that matter?

You can either download the report from the server and open it using Reports Builder 10g on your client and get the code. Or, enable trace and generate the tkprof file for this concurrent program and get the object names.
Thanks,
Hussein

A way to find out tables and fields referred by a transaction

I want to know whether there is a way to find all the database tables and fields referred by a transaction. I know that we can do F1 on each field to get the reference table and the fielname but its taking a lot of time for me..I need to know if there is any program or a way(some tool) to find out the tables and fieldnames for a transaction. Any help would be greatly appreciated..
Thanks,
Mohsin.

Hi Mohsin,
As suggested SQL Trace is the best Option.
Say inorder to Find the field inf. you can use SQL trace (ST05) .
Steps for the same:
1) Go to ST05 --> Activate Trace.
2) Run the trasaction , make some changes to the field for which you want to have the table name then SAVE.
3) Go again to ST05 ---> Deactive Trace
4) List trace
5) Then search for the chaged value which u had done on that transaction.
6) With this you will be able to see the table name in the Obj. name column.
**How can we find out what tables are being referred for what field???.
For this , one way which i follow other then F1 is :
i follow Steps 2 and step 5 which help me to locate those values only for which i am looking for the table only as with the changed value in transaction which u had done in step 2 and after saving it it will go to the DB table and on searching the same changed value in the trace give u the quick link of the table .
It helped me many times and saves time by doing linke this otherwise u have got all the options to as suggested by the FORUM .
Cheers
Sunny
Rewrd points, if found helpful

Customization tables and transactions

Hi everybody,
I have a very simple question:
I would like to know if every customization table is accessible through a transaction code.
If yes, then were can I find a table that contains the connection between customization table names and the transactions, which open them?
If no, then how can I access a customization table except for doing that through the SPRO?
Thanks,
Roy

Hi,
Check the table OBJSUB and
[How do I open a customization table for editing using my program?|Re: How do I open a customization table for editing using my program?;
Cheers,
Remi

Names of interface tables and interface programs of oracle modules

Hi all,
i need urgent and accurate information about the names of interface tables and interface programs of the following oracle modules,R12, or either ther are custom made. Any accurate link refering to the desire information would be much appreciated.
Plus i need a clear and simple definition and purpose of interface tables and interface program and by what other names are they known in industry.
Data Object,Oracle Module
Chart of Accounts,Oracle General Ledger
Trial Balance,Oracle General Ledger
Supplier Master,Oracle Payables
Open Supplier Invoices,Oracle Payables
Open Supplier Credit/ Debit Memos,Oracle Payables
Open Supplier Advances,Oracle Payables
Bank Master,Oracle Cash Management
Customer Master,Oracle Receivable
Asset Categories,Oracle Assets
Asset Master,Oracle Assets
Item Master,Oracle Inventory
Item Categories,Oracle Inventory
Sub Inventory and Locators,Oracle Inventory
Item On Hand Balances,Oracle Inventory
Item wise Per unit Cost,Oracle Inventory
Bill of Material,Oracle Discrete Manufacturing
Departments,Oracle Discrete Manufacturing
Operations,Oracle Discrete Manufacturing
Routings,Oracle Discrete Manufacturing
Resources,Oracle Discrete Manufacturing
Overheads,Oracle Discrete Manufacturing
Employee Master,Approval Hierarchy
Approval Hierarchy,Approval Hierarchy
Open Customer Invoices,Oracle Receivables
Open Customer Credit/ Debit Memos,Oracle Receivables
Open Customer Advances,Oracle Receivables
Pending Requisitions,Oracle Purchasing
Pending Purchase Orders,Oracle Purchasing
Open Sales Orders,Oracle Order Management
Price List,Oracle Order Management

Hi;
Its metalink note you need to login metalink wiht valid CSI(customer Support Identifier) number to can se note via using note number.
Please see:
Oracle EBS Based and Interface tables
Oracle EBS Based and Interface tables
Regard
Helios

Transaction DB02 = Missing Tables and Indexes shows under Secondary indexes from package $tmp

Hi SAP Gurus,
I noticed on our SAP business warehouse (BW) system (NetWeaver 7.0 based on AIX/Oracle 11g) in transaction DB02 => Diagnostics => Missing Tables and Indexes under Secondary indexes, 26 indexes, in package $tmp:
The indexes are defined, but they don't have been created on the database.
When I try to create them via the database tool, I am getting the warning:
Does the warning raise up, because they where defined in the $tmp package?
I was looking in SAP notes for a solution for this "warning" concerning the /BIC/F-Indexes but I didn't found yet anything helpful ...
Thanks for your help and ideas ...
Best regards
Carlos

Hi Carlos,
These are secondary indexes created during process chains in BI to improvise performance.
You may refer below SCN blogs on creation of these indices in BI.
Secondary Index - Improving DSO insert/read performance
How to Create Secondary Index on DSO in SAP BW
Hope this helps.
Regards,
Deepak Kori

Table For OBYU and OBYG transactions

Hi all,
I need to create a report in HR, where i need entries maintained through transaction OBYU and OBYG.
Could anyone tell me the table names to get the contents of those transactions.
Thanks in Advance.
Regards
Ravi

Hi All,
I Got a FM which gives the Details og OBYE and OBYG transactions .
HRPP_FI_ACCT_DET_HR
But we need to read record wise.
If we get table name , that would be better.
Thanks and Regards
Sunil

Tables and views relevant to concurrent program parameters

I'd like to know all the tables and views relevant to concurrent program parameters.
As far as I know, fnd_descr_flex_col_usage_vl, fnd_flex_value_sets, and fnd_parameters are such kind of tables or views. They can not provide enough information I want. As I guess that for some parameters, their values are queried from tables. Where can I find the information about how such parameters are queried?
Thanks in advance!

Hi,
I'd like to know all the tables and views relevant to concurrent program parameters. See these tables:
FND_CONCURRENT_QUEUE_PARAMS
FND_RUN_REQUESTS
FND_CONC_REQUEST_ARGUMENTS
FND_CONCURRENT_REQUESTS
FND_CONCURRENT_PROGRAMS
More details about these tables can be found in eTRM website.
eTRM
https://etrm.oracle.com
> They can not provide enough information I want. As I guess that for some parameters, their values are queried from tables. Where can I find the information about how such parameters are queried?
What information you are looking for?
You could get the query executed from the application by following the steps in (Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i) -- Query the concurrent program, then check the value of "SYSTEM.LAST_QUERY".
Regards,
Hussein

Z programs, Z tables, and Z transactions

Similar Messages

Maybe you are looking for