Z77A-G43 boot problem with catalyst drivers

Hi all,
I upgraded my pc this weekend. I have ZH77A-G43 with 3*4GB RAM and ATI HD7850 gfx card.
A new SATA HDD and a fresh windows7 install.
All goes well until I install catalyst drivers. After that, windows will not boot anymore. I can see 'Starting Windows' and after that the screen goes black and pc stops responding.
n safe mode, everything works fine again.
Do the catalyst drivers cause problems on this mobo?

Never mind see the beta bios release notes:
https://forum-en.msi.com/index.php?topic=161593.msg1197504#msg1197504
Quote
01.Fix VTX3D Radeon HD 7850 1GB X-Edition not display issue.
(Add below solution from E7751IMS.H52 and E7751IMS.H53:
Fix PCIE GEN3 display card issue.
Fix 'Integrated Graphics Share Memory' and 'DVMT Memory' item show incorrect.)
Seems as though that matches up nicely to our problem, so use the beta bios instead.

Similar Messages

Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta. When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with ATI drivers and gnome3?

I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)

E7-00 Problem with MTP drivers winXP service pack ...

I have E7-00 and i have a problem with MTP drivers not being installed and constatly showing device is not working properly in device manager.
I have win XP sp3, installed newest Nokia Ovi suite, and my computer is constatly trying to install MTP device drivers, and keeps complaining it cannot.
What should i do.
Cheers
Aleksandar

NOKIA IS NOT LISTENING TO THIS FAILURE, WHY DO WE HAVE THIS FORUM AT ALL WHEN NOBODY HELPS TO SOLVE THIS BUG

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Poll: Do you have cold boot problem with SB X-FI Fatal1t

Hi guys:
I have post a thread regarding the cold boot problem with SB X-FI Fatalty and OCZ GameXStream 600W SLI power supply combination. Apparently, no one has answer to that . In addition, I have recently RMA'd my psu and received a brand-new unit. The same problem still exists. If the problem is really with the power supply, doesn't matter what kind of the setup I have, I should still have the cold-boot problem. However, it doesn't seem like that. Doesn't matter what kind of cards I put on the motherboard, as long as the SB X-FI Fatalty card is there, there is cold boot problem (even with the setup of cpu, mother, ram, and the sound card only, WITHOUT video card and harddri've). And for other different setup without the SB X-FI Fatalty card, there is no cold boot. The cpu and memory are running at stock speed.
My post regarding the cold boot issue:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=79753
There is one user on the forum saying he has the same problem. Therefore, I think it might be the imcompatibility between the X-FI Fatalty and OCZ GameXStream PSU.
I would like to know how many people that has the same problem that I am having. So I can possibly narrow down the problem and contact OCZ tech support or creative tech support with more information. It would also be benefitical to those who have the same problem as I do.
Please post your system setup as well in the thread.
Greatly appreciate your opinions. Message Edited by White_Hair on 2-02-200604:58 AM
Message Edited by White_Hair on 2-02-200603:22 PM

I would venture to say that it isn't your powersupply, but more likely the X-Fi. I had troubles with my system, until I pulled out my X-Fi and replaced it with a non Creative Labs sound card. One of my troubles, which I incorrectly blamed on my powersupply was the ASUS A8R-MVP motherboard I had and the X-Fi XtremeMusic card, was after gaming for 4 hours, was the?sudden reboot of my system. Powersupply before, was an Antec TrueControl 2 550watt PSU. As it stands right now, I no longer have the parts mentioned and have a decent 700watt powersupply in my system, along with an ABIT AT8 32X motherboard. As you have probably seen there are a lot of problems with the X-Fi soundcards, and I in my right mind can't blame the motherboard, powersupply, motherboard chipset, ram, or any other component in ones system, if one is having trouble other than the X-Fi itself. I'll be honest, there is something quite frankly wrong with the X-Fi, and exactly what that is, I'll probably never know like most people.

K8N NEO4 Platinum cold boot problem with 165 opteron?

I have this board and have a cold boot problem with my opteron. Is there anything I can do to fix this? Its starting to get very anooying.
K8N NEO4 Platinum
165 opty dual core
2X1GB Ballistix PC4000
160GB sata2
7800GTX
X-Fi platinum
600 watt seasonic PSU

Well I am running them at the rated speed of 250 and the rated timings of 3-4-4-10 on the rated 2.8 volts. Ballistix have been known to die quickly when you throw to many volts at them for some reason. I dont get the cold boot problem with the OCZ. Once I finally get it to boot with the Ballistix it works just fine but the next morning I play hell to get it to boot again. I dont even get the main screen to let me get into bios. It just stays black. I have done all kinds of stress testing and ran memtest with no problems. I am really at a loss here.

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

Installing archlinux with catalyst drivers

Hello, i'm trying to use archlinux for a long time, but my notebook overheating with default drivers. My notebook has ATI 4650. When i try to install arch linux my notebook shuts down because of overheating while installing kernel packages. I even tried to put my computer to fridge it didn't work. I need to load kernel with catalyst drivers to install (I need a customized iso i guess). Please help me i wanna be an Archer so much

Cdh wrote:
You could try setting it to low power mode with the open source driver.
First, look if /sys/kernel/debug is empty.
If it is, then as root:
mount -t debugfs none /sys/kernel/debug
Then as root again:
echo profile > /sys/class/drm/card0/device/power_method
echo low > /sys/class/drm/card0/device/power_profile
I believe that should work from CLI-only too. But it may require a newer kernel than the one on the image (don't know what kernel the install image is at). If it doesn't work then you can use the not so official archboot image: https://downloads.archlinux.de/iso/archboot/latest
But when it is while kernel install it sounds more to me as if the CPU was too hot since building the initramfs is only CPU intensive...
Thanks. I will try these soon. I think GPU overheats then CPU makes the final straw during kernel install.

Boot problems with Z77A-G45

Quote from: CMaster on 22-June-12, 15:31:08
Processor: Intel i5-3570K retail (new)
Mainboard: MSI Z77A-G45 (new)
Memory: 2 x Corsair 4GB XMS3 DDR3-PC1600 CMXBG3N2A1600C9 (new)
Graphics card: MSI N560GTX-Ti Twin Frozr II (new, currently disconnected)
SSD: Crucial M4 512GB (new, currently disconnected)
Power supply: Antect earthwatts 500W (used, fully functional)
HDD1: WD Velociraptor 300GB (used, rather full)
HDD2: Samsung Spinpoint F3 2tb (used, currently disconnected)
Optical drive: DH-201AS DVD-+RW (used)
Once everything is all connected up, installed in the case, etc etc, upon power up, the fans all spin up, HDDs initialize etc. Then after 10 seconds or so the system powers down again, with the screen (whether on the external or internal graphics) never having been active. There are no beeps from the PC speaker whatsoever, nor do there seem to be any indicator lights as I've had on previous MSI motherboards. The manual is completely absent of any troubleshooting section. So my main question is, is there any way to tell what stage the startup is failing on? Other threads on this forum (here and here) suggest that the problem is due to lack of processor support. As the motherboard was sold as Ivy Bridge ready, I'd like soe way of confirming this as most likely cause before paying for some fix.
Hey I am actaully sharing the similar problem of yours....
I am using MSI H77MA-G43 (BIOS v1.5), and a set of DDR3-1600 4GB RAM x 2.
When i am using both 2 pcs of RAM, i am facing the same problem:
"after 10 seconds or so the system powers down again, with the screen (whether on the external or internal graphics) never having been active. There are no beeps from the PC speaker whatsoever, nor do there seem to be any indicator lights as I've had on previous MSI motherboards. "
When I use 1 pc of DDR3-1600 4GB RAM, it works again.
I just wonder if there is some RAM compatibility problem with MSI motherboard...I have tried below 2 sets of RAM:
AMD DDR3-1600 4GB x 2 (1.5V) (AE38G1609U2K-U)
Kingston HYPER-X DDR3-1600 4GB x 2 (1.65V) (KHX1600C9D3K2/8GX)
Cheers!

Please don't hijack other's topics. >>Please read and comply with the Forum Rules.<<
Your components are not the same, starting with the RAM. >>Posting Guide<<
Please supply your full system spec.
Your RAM is 1,65V overvolted DDR3-1600.
Only add one module as per the instructions. Then do a full CMOS clear with power cord removed. >>Clear CMOS Guide<<
Afterwards go into the BIOS and set that memory to 1333, (ensure that XMP is disabled for now). Set the DRAM voltage to 1,5V. Retest and advise.

MSI Z77A-G43-memory problem

Hello
I bought lately new cpu,mb and memory. When i turned it on it was still rebooting after few seconds after start. So i treid to put just one memory in slot. It worked but only if memory is in bank 3 or 4. In 1,2 computer is still rebooting. Also it works with two memory modules, but putted in 3,4 slots only. And just in single channel. I saw that many people have the same problem and shop service wrote them that it works like that. First You put memory in slots 3,4 and then in 1,2. It is strange for me. I don't have two another memory modules to check if this is true and I want to that it works in dual channel, not single. So, is this true or mb is broken?

Hello. I have the same problem, except, I use 4 Dimms in 4 slots on my MSI board. I installed speaker on MB to see if there are any beep sounds during the booting, but all seems ok. The problem is the PC keeps still rebooting after about 5 sec. from the start. There aren´t any visual information on screen, since the start is so short. I tried to install dimms in 2nd and 4th slot first. Then to 1st and 3rd. In both cases the problem was still the same. When I put all rams in all 4 slots, the result is the same (restart for ethernity). The only way that goes is the PC runs with only 1 dimm in either 1st or 2nd slot. I tested all the memory modules and all of them work fine. I even tried this on a differennt mainboard from ASUS P8Z77-V LX. Now I tested it on MSI Z77A-G43. Both mainboards are new. There is a very slim change that both of them would be defective. Before I got MSI MB, I ran couple of days on the ASUS MB and everything was perfect, so I don´t think that CPU is defective. I even ran a few benchmarks on it. But I still don´t understand why can´t I run the system with all 16 GB of RAM instead of 4 GB in one slot. Please help me.

MSI Z77a G43 boot loop

Hi,
I have read all issues about boot loop problems, but nothing fit mine.
I bought MB MS Z77A G43 and Core i5 3570K. After building it, the computer is restarting again again.
I clear the CMOS, boot and in the monitor it says, that setting was reset to default, it shows my CPU,RAM,HDD etc. and it gives me 2 choices:
1) Press F1 to run setup
2) Press F2 to continue.
I tries several times both option, but after pressing the button F1 or F2, the computer starts to boot loop again. I cant go to the bios. Dont know if the problem is CPU or MB. I tried another power supply, but it didnt solve it. Any ideas?
Thx for helping

Hello again,
I have change CPU and MB for the new ones, but problem still occurs. I found an information on the web, that i5 3570k supports only RAM with power consumption max 1.5V. I have Zeppelin DDR3 4GB kit (2x2GB) 1600Mhz, but when I clear the CMOS and boot, the MB says that I have only 1333Mhz. That means the RAMS has more then 1.5V?
What do u think? The problem is RAM, which are not supported by CPU?

MSI Z77A-G43 RAM Problems

Hi everybody,
I have some big problems with my new build:
Intel Celeron G1610
MSI Z77A-G43
2x4gb Corsair Vengeance LD low voltage 1600 mhz 1.35 v dual channel kit
Seasonic 620w PSU
Saphire 7850 2gb GDDRAM5
My system wont work with both ram sticks in. If I only use one of them (it doesn't matter which one) in whatever slot I want, I don't have any problems. However if I use both of them I get bsods or restarts very soon after windows finishes loading. I must also mention that it's almost impossible to install Windows with both Ram sticks in. I almost always get a bsod when the installer is expanding the windows files.
I must also mention that by default, my motherboard sets my ram to 1333 MHz and 1.5v even if the producer says that the ram should run at 1600 MHz and 1.35 v. If I set them to these values myself in the oc menu, they are reset to the default values again immediately after I get another crash.
I have the latest bios and drivers and I don't know what else to try: ( any ideas?
Thank you!

Hi flobelix and thank you very much for your response. I tried your solution and on the next powerup, my pc didn't crash at all and I ran a couple of games and memory intensive programs.
However, unfortunatelly, after I closed the PC for a while and restarted it again, the problems came back. The ram timings don't change anymore in BIOS but the system constantly restarts. I ran memtest for 6 hours last night with both sticks of ram in and it did not find any errors so I can't figure out what's wrong.
Here are a couple of crash dumps:
On Sun 2/24/2013 7:08:04 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022413-9204-02.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002CEF09D, 0xFFFFF88002A11C10, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sun 2/24/2013 7:08:04 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: win32k.sys (win32k!XLATEOBJ_iXlate+0xF104)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002CEF09D, 0xFFFFF88002A11C10, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sun 2/24/2013 7:06:31 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022413-9126-01.dmp
This was probably caused by the following module: iusb3xhc.sys (iusb3xhc+0xC0D8)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88003AEA0D8, 0x1, 0x17C)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\iusb3xhc.sys
product: USB 3.0 Device Driver
company: Intel Corporation
description: Intel(R) USB 3.0 eXtensible Host Controller Driver
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: iusb3xhc.sys (Intel(R) USB 3.0 eXtensible Host Controller Driver, Intel Corporation).
Google query: Intel Corporation KMODE_EXCEPTION_NOT_HANDLED
On Sun 2/24/2013 12:55:57 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022413-9188-01.dmp
This was probably caused by the following module: ntfs.sys (Ntfs+0x48AB)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880012598AB, 0xFFFFF88002FCB938, 0xFFFFF88002FCB190)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Sun 2/24/2013 12:55:51 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022413-8829-01.dmp
This was probably caused by the following module: Unknown ()
Bugcheck code: 0x0 (0x0, 0x0, 0x0, 0x0)
Error: CUSTOM_ERROR
A third party driver was identified as the probable root cause of this system error.
Google query: CUSTOM_ERROR
On Sun 2/24/2013 12:47:27 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022413-10842-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88002F2DEA0, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sun 2/24/2013 12:40:16 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022413-9516-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71ED0)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 2/23/2013 10:32:27 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-10030-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88002F26C30, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 2/23/2013 10:29:40 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-9516-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80000B9A850, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 2/23/2013 10:09:46 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-9438-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0xB2C22)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80002D0EC22, 0xFFFFF88006DDA6C8, 0xFFFFF88006DD9F20)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Since I'm desperate, I'm just gonna go ahead and reinstall windows again. During the last successful pc run (after I took your advice), I ran MSI live update and installed the rest of the utility software. Maybe this did something to my drivers.... I'm really reaching the end of my possibilities :(

Boot problem with new HD

I have just bought a new HD (WD 120GB SE, ATA100, 8MB CACHE) for my PC. My old HD was a Quantum Fireball Plus AS 20.5GB. I had in mind to remove the old one and copy the 2 partitions from the old one to the new (3 Partitions made by Partition Magic). I used the Norton Ghost 9 to copy the partitions with the "copy one drive to another' option, also select the one partition to be "active" so it can boot the OS and copy the "master boot records" from the old HD. When i restart the PC with the new HD as master after the "veryfing DMI pool data" i should see the windows logo with the loading bar, but the only thing i get is under the "veryfing DMI pool data" the message "error loading operating system"! ! ! The same thing happens if i copy the partition (with the OS) to a dvd again with Norton Ghost and try to recover it. And the strangest thing is that i have the same problem if i try to install (clean) windows to the HD, it copies some files to the HD and when it restarts so it can continue installing windows shows the same message. I have download a diagnostic program from WD and there is no problem with the HD. I have taken the HD to a friend of mine and it works fine. I forgot to mention that both bios and windows detect the HD. When i use the HD as slave, i can copy/cut files/folders with no problem in windows. I have the latest ver. of bios and nForce drivers. PLEASE HELP ME! ! !!
P.S. Sorry for my english. . .

If you use Ghost to copy from one disk to another and the geometry is different, it can happen that the result is not readable.
Simple way: plug disk as slave. Boot on the 20GB drive. Partition the new drive in windows. Copy the files.in windows. Activate the new partition as primary and bootable. Swap drives.

Z77a g43 BIOS problem

Hi all, I have a problem with the BIOS on my Z77a g43 motherboard.
First of all here are the system specs.
Cpu- i5 3570K
Motherboard- z77a g43
RAM- 8GB Kingston hyperX 1600MHz
PSU- Enermax 850w 80+ bronze
SSD- 120GB vertex plus
HDD- seagate 500GB
GPU- HD 7950 3GB
Heres the problem. When I use HD 4000 onboard graphics or a nvidea GPU all seems fine in my BIOS.
When I install a Radeon card my BIOS loses most of its features and looks completely different
No overclock options ect, it looks wierd and different, has anyone got a solution for this or had the same problem???
Ive tried clearing CMOS.
Different Radeon cards.
I`m runnion bios version 2.0 but have tried the latest BIOS but that made the problem worse(BIOS screen was zoomed into the top left of the screen)
Ive taken the motherboard battery out for a hour to make double sure the CMOS was totally clear.
Has anyone got any advice for me please This is driving me nuts.
I apologise if the same problem has been reported on this forum but I did look before posting.

My new monitor arrived today and I can confirm that the HDMI tv was the problem.
Everything appears normal now after 5 months of trying to fix something that wasn`t broke lol.
Can I thank everyone that has posted in this thread who`s offered their support
Now I have a normal display in the BIOS and can use all the functions i`m going to have a mess about with a small overclock.
I already changed the multiplier to 42 and all seems well, i`m sure their will be a thread on here somewhere offering advice on OCing the i5 3570K with this board, does anyone have a link to such thread please?? It seems daft me starting one if their is one already running.
I`m over the moon with this MSI board now its doing what it should be

Z77A-G43 boot problem with catalyst drivers

Similar Messages

Maybe you are looking for